agora inbox for pgsql-hackers@postgresql.orghelp / color / mirror / Atom feed
[PATCH v3 2/2] Error out if one iteration of non-direct DML affects more than one row on the foreign server 324+ messages / 2 participants [nested] [flat]
* [PATCH v3 2/2] Error out if one iteration of non-direct DML affects more than one row on the foreign server @ 2025-07-18 14:52 Jehan-Guillaume de Rorthais <jgdr@dalibo.com> 0 siblings, 0 replies; 324+ messages in thread From: Jehan-Guillaume de Rorthais @ 2025-07-18 14:52 UTC (permalink / raw) When a foreign table points to a partitioned table or an inheritance parent on the foreign server, a non-direct DML can affect multiple rows when only one row is intended to be affected. This happens because postgres_fdw uses only ctid to identify a row to work on. Though ctid uniquely identifies a row in a single table, in a partitioned table or in an inheritance hierarchy, there can be be multiple rows, in different partitions, with the same ctid. So a DML statement sent to the foreign server by postgres_fdw ends up affecting more than one rows, only one of which is intended to be affected. In such a case it's good to throw an error instead of corrupting remote database with unwanted UPDATE/DELETEs. Subsequent commits will try to fix this situation. Author: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com> Author: Kyotaro Horiguchi <horikyota.ntt@gmail.com> Rebased by Jehan-Guillaume de Rorthais <jgdr@dalibo.com> --- .../postgres_fdw/expected/postgres_fdw.out | 26 ++++++++------ contrib/postgres_fdw/postgres_fdw.c | 36 +++++++++++++++---- 2 files changed, 46 insertions(+), 16 deletions(-) diff --git a/contrib/postgres_fdw/expected/postgres_fdw.out b/contrib/postgres_fdw/expected/postgres_fdw.out index 62019eaa881..b0ef54a2889 100644 --- a/contrib/postgres_fdw/expected/postgres_fdw.out +++ b/contrib/postgres_fdw/expected/postgres_fdw.out @@ -8984,10 +8984,11 @@ UPDATE fa SET aa = (CASE WHEN random() <= 1 THEN 'zzzz' ELSE NULL END) WHERE aa (5 rows) UPDATE fa SET aa = (CASE WHEN random() <= 1 THEN 'zzzz' ELSE NULL END) WHERE aa = 'aaa'; +ERROR: foreign server affected 2 rows when only one was expected SELECT tableoid::regclass, ctid, * FROM fa; - tableoid | ctid | aa -----------+-------+------ - fa | (0,2) | zzzz + tableoid | ctid | aa +----------+-------+----- + fa | (0,1) | aaa fa | (0,1) | bbb (2 rows) @@ -9008,11 +9009,13 @@ DELETE FROM fa WHERE aa = (CASE WHEN random() <= 1 THEN 'aaa' ELSE 'bbb' END); (6 rows) DELETE FROM fa WHERE aa = (CASE WHEN random() <= 1 THEN 'aaa' ELSE 'bbb' END); +ERROR: foreign server affected 2 rows when only one was expected SELECT tableoid::regclass, ctid, * FROM fa; - tableoid | ctid | aa + tableoid | ctid | aa ----------+-------+----- + fa | (0,1) | aaa fa | (0,1) | bbb -(1 row) +(2 rows) -- cleanup DROP FOREIGN TABLE fa; @@ -9048,10 +9051,11 @@ UPDATE fplt SET b = (CASE WHEN random() <= 1 THEN 10 ELSE 20 END) WHERE a = 1; (5 rows) UPDATE fplt SET b = (CASE WHEN random() <= 1 THEN 10 ELSE 20 END) WHERE a = 1; +ERROR: foreign server affected 2 rows when only one was expected SELECT tableoid::regclass, ctid, * FROM fplt; - tableoid | ctid | a | b -----------+-------+---+---- - fplt | (0,2) | 1 | 10 + tableoid | ctid | a | b +----------+-------+---+--- + fplt | (0,1) | 1 | 1 fplt | (0,1) | 2 | 2 (2 rows) @@ -9071,11 +9075,13 @@ DELETE FROM fplt WHERE a = (CASE WHEN random() <= 1 THEN 1 ELSE 10 END); (6 rows) DELETE FROM fplt WHERE a = (CASE WHEN random() <= 1 THEN 1 ELSE 10 END); +ERROR: foreign server affected 2 rows when only one was expected SELECT tableoid::regclass, ctid, * FROM fplt; tableoid | ctid | a | b ----------+-------+---+--- - fplt | (0,1) | 2 | 2 -(1 row) + fplt | (0,1) | 1 | 1 + fplt | (0,1) | 2 | 2 +(2 rows) DROP TABLE plt; DROP FOREIGN TABLE fplt; diff --git a/contrib/postgres_fdw/postgres_fdw.c b/contrib/postgres_fdw/postgres_fdw.c index e0a34b27c7c..09c87d0e5d8 100644 --- a/contrib/postgres_fdw/postgres_fdw.c +++ b/contrib/postgres_fdw/postgres_fdw.c @@ -4132,7 +4132,8 @@ execute_foreign_modify(EState *estate, ItemPointer ctid = NULL; const char **p_values; PGresult *res; - int n_rows; + int n_rows_returned; + int n_rows_affected; StringInfoData sql; /* The operation should be INSERT, UPDATE, or DELETE */ @@ -4213,27 +4214,50 @@ execute_foreign_modify(EState *estate, pgfdw_report_error(ERROR, res, fmstate->conn, true, fmstate->query); /* Check number of rows affected, and fetch RETURNING tuple if any */ + n_rows_affected = atoi(PQcmdTuples(res)); if (fmstate->has_returning) { Assert(*numSlots == 1); - n_rows = PQntuples(res); - if (n_rows > 0) + n_rows_returned = PQntuples(res); + if (n_rows_returned > 0) store_returning_result(fmstate, slots[0], res); + + // FIXME: shouldn't we check the max number of rows returned is one? } else - n_rows = atoi(PQcmdTuples(res)); + n_rows_returned = 0; /* And clean up */ PQclear(res); MemoryContextReset(fmstate->temp_cxt); - *numSlots = n_rows; + /* + * UPDATE & DELETE command can only affect one row, make sure this contract + * is respected. + * CMD_INSERT can insert multiple row when called from ForeignBatchInsert. + */ + if (operation != CMD_INSERT) + { + /* No rows should be returned if no rows were affected */ + if (n_rows_affected == 0 && n_rows_returned != 0) + elog(ERROR, "foreign server returned %d rows when no row was affected", + n_rows_returned); + + /* ERROR if more than one row was updated on the remote end */ + if (n_rows_affected > 1) + ereport(ERROR, + (errcode (ERRCODE_FDW_ERROR), /* XXX */ + errmsg ("foreign server affected %d rows when only one was expected", + n_rows_affected))); + } + + *numSlots = n_rows_returned; /* * Return NULL if nothing was inserted/updated/deleted on the remote end */ - return (n_rows > 0) ? slots : NULL; + return (n_rows_affected > 0) ? slots : NULL; } /* -- 2.50.0 --MP_/4ZRYdF7Ah.pt5w65PuZdaPz-- ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 0 siblings, 0 replies; 324+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 324+ messages in thread
end of thread, other threads:[~2026-07-01 10:31 UTC | newest] Thread overview: 324+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2025-07-18 14:52 [PATCH v3 2/2] Error out if one iteration of non-direct DML affects more than one row on the foreign server Jehan-Guillaume de Rorthais <jgdr@dalibo.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <jonathan.abdiel@gmail.com>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox