pg.ddx.io pgsql-interfaces@postgresql.org mailing list archive
help / color / mirror / Atom feedPerl
7+ messages / 6 participants
[nested] [flat]
* Perl
@ 1999-09-12 21:47 Dan <gelles@inter.net.il>
0 siblings, 0 replies; 7+ messages in thread
From: Dan @ 1999-09-12 21:47 UTC (permalink / raw)
To: pgsql-interfaces
Hello all.
1. Where can i find documntetion and examples for using postgresql from Perl?
Regards,
Dan
^ permalink raw reply [nested|flat] 7+ messages in thread
* PERL
@ 1999-09-19 11:17 Jason Doller <jason@intekom.co.za>
0 siblings, 1 reply; 7+ messages in thread
From: Jason Doller @ 1999-09-19 11:17 UTC (permalink / raw)
To: pgsql-interfaces; hackers@postgresql.org
Hi All
I'm a bit lost! Where can I find documentation on accessing postgres
from inside PERL (5)?
Any help will be appreciated. (The thing is, I'm sure I've seen the info
somewhere, but for the life of me I can't remember where...)
Thanks
Jason Doller
^ permalink raw reply [nested|flat] 7+ messages in thread
* Re: [INTERFACES] PERL
@ 1999-09-19 14:57 Brett W. McCoy <bmccoy@lan2wan.com>
parent: Jason Doller <jason@intekom.co.za>
0 siblings, 0 replies; 7+ messages in thread
From: Brett W. McCoy @ 1999-09-19 14:57 UTC (permalink / raw)
To: rjd@intekom.co.za; +Cc: pgsql-interfaces; hackers@postgresql.org
On Sun, 19 Sep 1999, Jason Doller wrote:
> I'm a bit lost! Where can I find documentation on accessing postgres
> from inside PERL (5)?
>
> Any help will be appreciated. (The thing is, I'm sure I've seen the info
> somewhere, but for the life of me I can't remember where...)
Under the source tree, go to the interfaces directory, and there is a
directory for the perl interface (Pg.pm). You have to enable the Perl
option when you run configure, and you will also have to install the
module as root, since it gets installed under the module hierarchy
wherever you have Perl installed. Then you only need to do a 'perldoc Pg'
to see the documentation on it. See the build instructions for more
information on the how to install the Perl module.
Brett W. McCoy
http://www.lan2wan.com/~bmccoy/
-----------------------------------------------------------------------
Don't let your mind wander -- it's too little to be let out alone.
^ permalink raw reply [nested|flat] 7+ messages in thread
* Perl
@ 2003-06-26 09:20 Giorgio Ponza <giorgio@opla.it>
0 siblings, 1 reply; 7+ messages in thread
From: Giorgio Ponza @ 2003-06-26 09:20 UTC (permalink / raw)
To: pgsql-interfaces
Sorry if i ask you, but reading the past messages didn't help me
I'm trying to configure dbmirror for my PostgreSQL 7.3.3 installation, but
when i try to execute the DBMirror.sql, i get the error:
Can't locate Pg.pm in @INC (@INC contains:
/usr/local/lib/perl5/5.8.0/i686-linux
/usr/local/lib/perl5/5.8.0 /usr/local/lib/perl5/site_perl/5.8.0/i686-linux
/usr
/local/lib/perl5/site_perl/5.8.0 /usr/local/lib/perl5/site_perl .) at
./DBMirror
.pl line 76.
BEGIN failed--compilation aborted at ./DBMirror.pl line 76.
I installed PostgreSQL 7.3.3 with the --with-perl (also --with-tcl)
The dbmirror README says to see in src/interfaces/perl5 but i don't have
that dir.
I also see in /usr/local/pgsql/lib and there is the plperl.so file
Can anyone help me?
tx
Giorgio Ponza
^ permalink raw reply [nested|flat] 7+ messages in thread
* Re: Perl
@ 2003-06-26 14:00 greg@turnstep.com
parent: Giorgio Ponza <giorgio@opla.it>
0 siblings, 2 replies; 7+ messages in thread
From: greg@turnstep.com @ 2003-06-26 14:00 UTC (permalink / raw)
To: pgsql-interfaces
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
> Sorry if i ask you, but reading the past messages didn't help me
> I'm trying to configure dbmirror for my PostgreSQL 7.3.3 installation, but
> when i try to execute the DBMirror.sql, i get the error:
>
> Can't locate Pg.pm in @INC (@INC contains:
Pg.pm is the PostgreSQL version of the DBI driver for Perl. You can install
it from here:
http://theoryx5.uwinnipeg.ca/mod_perl/cpan-search?site=ftp.funet.fi;modinfo=4348
Once installed, you should no longer see the error above. If you have any
problems, feel free to email the list.
- --
Greg Sabino Mullane greg@turnstep.com
PGP Key: 0x14964AC8 200306260955
-----BEGIN PGP SIGNATURE-----
Comment: http://www.turnstep.com/pgp.html
iD8DBQE++vwwvJuQZxSWSsgRAgdPAJoDjwB0DgyGfWh903rC4H7Hyx4H1QCg87tZ
qf2SmFqvDACyua1hG1/VEqc=
=0xrA
-----END PGP SIGNATURE-----
^ permalink raw reply [nested|flat] 7+ messages in thread
* Re: Perl
@ 2003-06-26 15:01 Giorgio Ponza <giorgio@opla.it>
parent: greg@turnstep.com
1 sibling, 0 replies; 7+ messages in thread
From: Giorgio Ponza @ 2003-06-26 15:01 UTC (permalink / raw)
To: pgsql-interfaces
Tx for the answer, i found also this link
http://gborg.postgresql.org/project/pgperl/projdisplay.php
i installed and now it works (not yet dbmirror, but i am trying)
I will try all the two
Tx again
Giorgio Ponza
You wrote:
> Pg.pm is the PostgreSQL version of the DBI driver for Perl. You can
install
> it from here:
>
>
http://theoryx5.uwinnipeg.ca/mod_perl/cpan-search?site=ftp.funet.fi;modinfo=
4348
>
>
> Once installed, you should no longer see the error above. If you have any
> problems, feel free to email the list.
^ permalink raw reply [nested|flat] 7+ messages in thread
* Re: Perl
@ 2003-06-26 15:02 Keith Keller <kkeller-postgres@wombat.san-francisco.ca.us>
parent: greg@turnstep.com
1 sibling, 0 replies; 7+ messages in thread
From: Keith Keller @ 2003-06-26 15:02 UTC (permalink / raw)
To: pgsql-interfaces
On Thu, Jun 26, 2003 at 02:00:32PM -0000, greg@turnstep.com wrote:
>
> > Sorry if i ask you, but reading the past messages didn't help me
> > I'm trying to configure dbmirror for my PostgreSQL 7.3.3 installation, but
> > when i try to execute the DBMirror.sql, i get the error:
> >
> > Can't locate Pg.pm in @INC (@INC contains:
>
> Pg.pm is the PostgreSQL version of the DBI driver for Perl.
Actually, Pg.pm is also a non-DBI interface to PostgreSQL:
http://theoryx5.uwinnipeg.ca/mod_perl/cpan-search?site=ftp.funet.fi;modinfo=14303
If the script has "use Pg;", then this is the module you need. If it
says "use DBI;", then you need the first module Greg mentioned.
--keith
--
kkeller@speakeasy.net
alt.os.linux.slackware FAQ: http://wombat.san-francisco.ca.us/cgi-bin/fom
^ permalink raw reply [nested|flat] 7+ messages in thread
end of thread, other threads:[~2003-06-26 15:02 UTC | newest]
Thread overview: 7+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
1999-09-12 21:47 Perl Dan <gelles@inter.net.il>
1999-09-19 11:17 PERL Jason Doller <jason@intekom.co.za>
1999-09-19 14:57 ` Re: [INTERFACES] PERL Brett W. McCoy <bmccoy@lan2wan.com>
2003-06-26 09:20 Perl Giorgio Ponza <giorgio@opla.it>
2003-06-26 14:00 ` greg@turnstep.com
2003-06-26 15:01 ` Giorgio Ponza <giorgio@opla.it>
2003-06-26 15:02 ` Keith Keller <kkeller-postgres@wombat.san-francisco.ca.us>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox