pg.ddx.io pgsql-interfaces@postgresql.org mailing list archive
help / color / mirror / Atom feedpgadmin question
10+ messages / 3 participants
[nested] [flat]
* pgadmin question
@ 1999-12-22 14:46 Michael Meskes <meskes@postgresql.org>
0 siblings, 1 reply; 10+ messages in thread
From: Michael Meskes @ 1999-12-22 14:46 UTC (permalink / raw)
To: pgsql-interfaces
I just installed pgadmin 6.5.4. When I start it it asks for a Datasource
where I choose the postgresql ODBC driver. I also enter my postgres user as
user. With M$ Access this setup works. However, pgadmin gives me error 430,
i.e. "Class does not support Automation or does not support expected
interface".
Any idea what went wrong?
Michael
--
Michael Meskes | Go SF 49ers!
Th.-Heuss-Str. 61, D-41812 Erkelenz | Go Rhein Fire!
Tel.: (+49) 2431/72651 | Use Debian GNU/Linux!
Email: Michael@Fam-Meskes.De | Use PostgreSQL!
^ permalink raw reply [nested|flat] 10+ messages in thread
* Re: [INTERFACES] pgadmin question
@ 1999-12-22 15:07 Ken J. Wright <ken@ori-ind.com>
parent: Michael Meskes <meskes@postgresql.org>
0 siblings, 0 replies; 10+ messages in thread
From: Ken J. Wright @ 1999-12-22 15:07 UTC (permalink / raw)
To: pgsql-interfaces
I also just installed. The Datasource pulldown does not fill with any
entries, so I have nothing to choose from, therefore no connection is
possible. nt4 sp4.
Ken
At 15:46 12/22/1999 +0100, Michael Meskes wrote:
>I just installed pgadmin 6.5.4. When I start it it asks for a Datasource
>where I choose the postgresql ODBC driver. I also enter my postgres user as
>user. With M$ Access this setup works. However, pgadmin gives me error 430,
>i.e. "Class does not support Automation or does not support expected
>interface".
>
>Any idea what went wrong?
>
>Michael
^ permalink raw reply [nested|flat] 10+ messages in thread
* RE: [INTERFACES] pgadmin question
@ 1999-12-22 15:41 Dave Page <dpage@vale-housing.co.uk>
0 siblings, 1 reply; 10+ messages in thread
From: Dave Page @ 1999-12-22 15:41 UTC (permalink / raw)
To: pgsql-interfaces
This problem has been reported a couple of times in the past and has always
been cured by applying the latest versions of Microsoft's DCOM and MDAC
(http://www.microsoft.com/com/tech/dcom.asp &
http://www.microsoft.com/data/mdac2.htm).
Regards,
Dave.
--
Network & Systems Manager, The Vale Housing Association.
http://www.vale-housing.co.uk (Work)
http://www.pgadmin.freeserve.co.uk (Home of pgAdmin)
Beer can be a permanent solution, but only if you have enough of it!
> -----Original Message-----
> From: Michael Meskes [mailto:meskes@postgreSQL.org]
> Sent: 22 December 1999 14:47
> To: PostgreSQL Interfaces
> Subject: [INTERFACES] pgadmin question
>
>
> I just installed pgadmin 6.5.4. When I start it it asks for a
> Datasource
> where I choose the postgresql ODBC driver. I also enter my
> postgres user as
> user. With M$ Access this setup works. However, pgadmin gives
> me error 430,
> i.e. "Class does not support Automation or does not support expected
> interface".
>
> Any idea what went wrong?
>
> Michael
>
> --
> Michael Meskes | Go SF 49ers!
> Th.-Heuss-Str. 61, D-41812 Erkelenz | Go Rhein Fire!
> Tel.: (+49) 2431/72651 | Use Debian GNU/Linux!
> Email: Michael@Fam-Meskes.De | Use PostgreSQL!
>
> ************
>
^ permalink raw reply [nested|flat] 10+ messages in thread
* RE: [INTERFACES] pgadmin question
@ 1999-12-22 16:06 Dave Page <dpage@vale-housing.co.uk>
0 siblings, 0 replies; 10+ messages in thread
From: Dave Page @ 1999-12-22 16:06 UTC (permalink / raw)
To: pgsql-interfaces
This seems to be an NT problem which I am looking at now. Sorry for any
inconvenience this may cause NT users - I'll post a patched .exe or whatever
to our site when I've found the problem...
Regards,
Dave.
--
Network & Systems Manager, The Vale Housing Association.
http://www.vale-housing.co.uk (Work)
http://www.pgadmin.freeserve.co.uk (Home of pgAdmin)
Beer can be a permanent solution, but only if you have enough of it!
> -----Original Message-----
> From: Ken J. Wright [mailto:ken@ori-ind.com]
> Sent: 22 December 1999 15:07
> To: PostgreSQL Interfaces
> Subject: Re: [INTERFACES] pgadmin question
>
>
> I also just installed. The Datasource pulldown does not fill with any
> entries, so I have nothing to choose from, therefore no connection is
> possible. nt4 sp4.
>
> Ken
>
> At 15:46 12/22/1999 +0100, Michael Meskes wrote:
> >I just installed pgadmin 6.5.4. When I start it it asks for
> a Datasource
> >where I choose the postgresql ODBC driver. I also enter my
> postgres user as
> >user. With M$ Access this setup works. However, pgadmin
> gives me error 430,
> >i.e. "Class does not support Automation or does not support expected
> >interface".
> >
> >Any idea what went wrong?
> >
> >Michael
>
>
> ************
>
^ permalink raw reply [nested|flat] 10+ messages in thread
* RE: [INTERFACES] pgadmin question
@ 1999-12-22 16:49 Dave Page <dpage@vale-housing.co.uk>
0 siblings, 1 reply; 10+ messages in thread
From: Dave Page @ 1999-12-22 16:49 UTC (permalink / raw)
To: pgsql-interfaces
> -----Original Message-----
> From: Dave Page
> Sent: 22 December 1999 16:06
> To: 'pgsql-interfaces@postgresql.org'
> Subject: RE: [INTERFACES] pgadmin question
>
>
> This seems to be an NT problem which I am looking at now.
> Sorry for any inconvenience this may cause NT users - I'll
> post a patched .exe or whatever to our site when I've found
> the problem...
>
An updated .exe (with the original logon code in it) can be found in:
http://www.pgadmin.freeserve.co.uk/pgadmin-exe.zip
Just extract it over the existing .exe in C:\Program Files\Vale
Software\pgAdmin
The distribution of v6.5.4 has temporarily been removed from our site. It
will be replaced with a new one shortly that will contain the updated .exe
and also a new installation program which makes the distribution slightly
smaller.
Regards,
Dave.
--
Network & Systems Manager, The Vale Housing Association.
http://www.vale-housing.co.uk (Work)
http://www.pgadmin.freeserve.co.uk (Home of pgAdmin)
Beer can be a permanent solution, but only if you have enough of it!
^ permalink raw reply [nested|flat] 10+ messages in thread
* Re: [INTERFACES] pgadmin question
@ 1999-12-22 19:31 Michael Meskes <meskes@postgresql.org>
parent: Dave Page <dpage@vale-housing.co.uk>
0 siblings, 0 replies; 10+ messages in thread
From: Michael Meskes @ 1999-12-22 19:31 UTC (permalink / raw)
To: pgsql-interfaces
On Wed, Dec 22, 1999 at 03:41:27PM -0000, Dave Page wrote:
> This problem has been reported a couple of times in the past and has always
> been cured by applying the latest versions of Microsoft's DCOM and MDAC
> (http://www.microsoft.com/com/tech/dcom.asp &
I got this at the same time I got pgadmin.
> http://www.microsoft.com/data/mdac2.htm).
Will get this too. Hopefully it is not too big.
Michael
--
Michael Meskes | Go SF 49ers!
Th.-Heuss-Str. 61, D-41812 Erkelenz | Go Rhein Fire!
Tel.: (+49) 2431/72651 | Use Debian GNU/Linux!
Email: Michael@Fam-Meskes.De | Use PostgreSQL!
^ permalink raw reply [nested|flat] 10+ messages in thread
* Re: [INTERFACES] pgadmin question
@ 1999-12-22 19:32 Michael Meskes <meskes@postgresql.org>
parent: Dave Page <dpage@vale-housing.co.uk>
0 siblings, 0 replies; 10+ messages in thread
From: Michael Meskes @ 1999-12-22 19:32 UTC (permalink / raw)
To: pgsql-interfaces
On Wed, Dec 22, 1999 at 04:49:51PM -0000, Dave Page wrote:
> An updated .exe (with the original logon code in it) can be found in:
>
> http://www.pgadmin.freeserve.co.uk/pgadmin-exe.zip
Will this work around my problem too?
Michael
--
Michael Meskes | Go SF 49ers!
Th.-Heuss-Str. 61, D-41812 Erkelenz | Go Rhein Fire!
Tel.: (+49) 2431/72651 | Use Debian GNU/Linux!
Email: Michael@Fam-Meskes.De | Use PostgreSQL!
^ permalink raw reply [nested|flat] 10+ messages in thread
* RE: [INTERFACES] pgadmin question
@ 1999-12-22 20:03 Dave Page <dpage@vale-housing.co.uk>
0 siblings, 0 replies; 10+ messages in thread
From: Dave Page @ 1999-12-22 20:03 UTC (permalink / raw)
To: pgsql-interfaces
This is now fixed (I'm having a *seriously* bad day...).
> -----Original Message-----
> From: Ken J. Wright [mailto:ken@ori-ind.com]
> Sent: 22 December 1999 17:27
> To: Dave Page
> Subject: RE: [INTERFACES] pgadmin question
>
>
> >An updated .exe (with the original logon code in it) can be found in:
> >
> >http://www.pgadmin.freeserve.co.uk/pgadmin-exe.zip
>
> Dave, the url doesn't work, i.e. "Not Found"
>
> Ken
>
^ permalink raw reply [nested|flat] 10+ messages in thread
* RE: [INTERFACES] pgadmin question
@ 1999-12-22 20:31 Ken J. Wright <ken@ori-ind.com>
0 siblings, 0 replies; 10+ messages in thread
From: Ken J. Wright @ 1999-12-22 20:31 UTC (permalink / raw)
To: Dave Page <dpage@vale-housing.co.uk>; pgsql-interfaces
Works great Dave. Love the table edit feature!
Ken
At 20:03 12/22/1999 -0000, Dave Page wrote:
>
>This is now fixed (I'm having a *seriously* bad day...).
>
>
>> -----Original Message-----
>> From: Ken J. Wright [mailto:ken@ori-ind.com]
>> Sent: 22 December 1999 17:27
>> To: Dave Page
>> Subject: RE: [INTERFACES] pgadmin question
>>
>>
>> >An updated .exe (with the original logon code in it) can be found in:
>> >
>> >http://www.pgadmin.freeserve.co.uk/pgadmin-exe.zip
>>
>> Dave, the url doesn't work, i.e. "Not Found"
>>
>> Ken
>>
>
>************
>
^ permalink raw reply [nested|flat] 10+ messages in thread
* RE: [INTERFACES] pgadmin question
@ 1999-12-23 08:17 Dave Page <dpage@vale-housing.co.uk>
0 siblings, 0 replies; 10+ messages in thread
From: Dave Page @ 1999-12-23 08:17 UTC (permalink / raw)
To: pgsql-interfaces; +Cc: 'ken@ori-ind.com' <ken@ori-ind.com>
(Re-sent as the list server seems to dislike me today!)
This is now fixed (I'm having a *seriously* bad day...).
> -----Original Message-----
> From: Ken J. Wright [mailto:ken@ori-ind.com]
> Sent: 22 December 1999 17:27
> To: Dave Page
> Subject: RE: [INTERFACES] pgadmin question
>
>
> >An updated .exe (with the original logon code in it) can be found in:
> >
> >http://www.pgadmin.freeserve.co.uk/pgadmin-exe.zip
>
> Dave, the url doesn't work, i.e. "Not Found"
>
> Ken
>
^ permalink raw reply [nested|flat] 10+ messages in thread
end of thread, other threads:[~1999-12-23 08:17 UTC | newest]
Thread overview: 10+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
1999-12-22 14:46 pgadmin question Michael Meskes <meskes@postgresql.org>
1999-12-22 15:07 ` Ken J. Wright <ken@ori-ind.com>
1999-12-22 15:41 RE: [INTERFACES] pgadmin question Dave Page <dpage@vale-housing.co.uk>
1999-12-22 19:31 ` Michael Meskes <meskes@postgresql.org>
1999-12-22 16:06 RE: [INTERFACES] pgadmin question Dave Page <dpage@vale-housing.co.uk>
1999-12-22 16:49 RE: [INTERFACES] pgadmin question Dave Page <dpage@vale-housing.co.uk>
1999-12-22 19:32 ` Michael Meskes <meskes@postgresql.org>
1999-12-22 20:03 RE: [INTERFACES] pgadmin question Dave Page <dpage@vale-housing.co.uk>
1999-12-22 20:31 RE: [INTERFACES] pgadmin question Ken J. Wright <ken@ori-ind.com>
1999-12-23 08:17 RE: [INTERFACES] pgadmin question Dave Page <dpage@vale-housing.co.uk>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox