pg.ddx.io pgsql-interfaces@postgresql.org mailing list archive
help / color / mirror / Atom feedbcc32.mak for libpq broken? (distro 8.0.0)
5+ messages / 3 participants
[nested] [flat]
* bcc32.mak for libpq broken? (distro 8.0.0)
@ 2005-02-20 17:09 =?ISO-8859-2?Q?Ber=E9nyi_G=E1bor?= <ber_@freemail.hu>
0 siblings, 0 replies; 5+ messages in thread
From: Berényi Gábor @ 2005-02-20 17:09 UTC (permalink / raw)
To: pgsql-interfaces
Dear libpq programmers,
src\interfaces\libpq> make -f bcc32.mak
fails with the message
'".\Release\win32.obj"' does not exist - don't know how to make it
Please, help.
With love, Gabor
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: [INTERFACES] bcc32.mak for libpq broken? (distro 8.0.0)
@ 2005-03-07 21:21 Bruce Momjian <pgman@candle.pha.pa.us>
0 siblings, 0 replies; 5+ messages in thread
From: Bruce Momjian @ 2005-03-07 21:21 UTC (permalink / raw)
To: Berényi Gábor <ber_@freemail.hu>; +Cc: PostgreSQL-patches <pgsql-patches@postgresql.org>
Berényi Gábor wrote:
> The problem is something else.
> Gives the same message.
>
> Bruce Momjian <pgman@candle.pha.pa.us> ?rta:
>
> > Ber?nyi G?bor wrote:
> > > Dear Bruce,
> > > Didn't work:
> > > Fatal bcc32.mak 169: No terminator specified for in-line file
> operator
> > > Look forward to hear of you again, Gabor
> >
> > OK, new bcc32.mak attached. It turns out the actions were
> indented with
> > spaces instead of tabs.
OK, I think I figured it out. "Resource files" are done differently in
MS make and bcc make. I have attached a new file. Please test and let
me know. If you can keep testing, we will eventually get this working.
Thanks.
--
Bruce Momjian | http://candle.pha.pa.us
pgman@candle.pha.pa.us | (610) 359-1001
+ If your life is a hard drive, | 13 Roberts Road
+ Christ can be your backup. | Newtown Square, Pennsylvania 19073
# Makefile for Borland C++ 5.5
# Will build a Win32 static library libpq.lib
# and a Win32 dynamic library libpq.dll with import library libpqdll.lib
# Borland C++ base install directory goes here
# BCB=d:\Borland\Bcc55
!MESSAGE Building the Win32 DLL and Static Library...
!MESSAGE
!IF "$(CFG)" == ""
CFG=Release
!MESSAGE No configuration specified. Defaulting to Release.
!MESSAGE
!ELSE
!MESSAGE Configuration "$(CFG)"
!MESSAGE
!ENDIF
!IF "$(CFG)" != "Release" && "$(CFG)" != "Debug"
!MESSAGE Invalid configuration "$(CFG)" specified.
!MESSAGE You can specify a configuration when running MAKE
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE
!MESSAGE make -DCFG=[Release | Debug] /f bcc32.mak
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "Release" (Win32 Release DLL and Static Library)
!MESSAGE "Debug" (Win32 Debug DLL and Static Library)
!MESSAGE
!ERROR An invalid configuration was specified.
!ENDIF
!IF "$(OS)" == "Windows_NT"
NULL=
!ELSE
NULL=nul
!ENDIF
!IF "$(CFG)" == "Debug"
DEBUG=1
OUTDIR=.\Debug
INTDIR=.\Debug
!ELSE
OUTDIR=.\Release
INTDIR=.\Release
!ENDIF
OUTFILENAME=blibpq
USERDEFINES=FRONTEND;NDEBUG;WIN32;_WINDOWS;HAVE_VSNPRINTF;HAVE_STRDUP;
CPP=bcc32.exe
CPP_PROJ = -I$(BCB)\include;..\..\include -WD -c -D$(USERDEFINES) -tWM \
-a8 -X -w-use -w-par -w-pia -w-csu -w-aus -w-ccc
!IFDEF DEBUG
CPP_PROJ = $(CPP_PROJ) -Od -r- -k -v -y -vi- -D_DEBUG
!else
CPP_PROJ = $(CPP_PROJ) -O -Oi -OS -DNDEBUG
!endif
CLEAN :
-@erase "$(INTDIR)\getaddrinfo.obj"
-@erase "$(INTDIR)\pgstrcasecmp.obj"
-@erase "$(INTDIR)\thread.obj"
-@erase "$(INTDIR)\inet_aton.obj"
-@erase "$(INTDIR)\crypt.obj"
-@erase "$(INTDIR)\noblock.obj"
-@erase "$(INTDIR)\md5.obj"
-@erase "$(INTDIR)\ip.obj"
-@erase "$(INTDIR)\fe-auth.obj"
-@erase "$(INTDIR)\fe-protocol2.obj"
-@erase "$(INTDIR)\fe-protocol3.obj"
-@erase "$(INTDIR)\fe-connect.obj"
-@erase "$(INTDIR)\fe-exec.obj"
-@erase "$(INTDIR)\fe-lobj.obj"
-@erase "$(INTDIR)\fe-misc.obj"
-@erase "$(INTDIR)\fe-print.obj"
-@erase "$(INTDIR)\fe-secure.obj"
-@erase "$(INTDIR)\pqexpbuffer.obj"
-@erase "$(INTDIR)\pqsignal.obj"
-@erase "$(OUTDIR)\libpqdll.obj"
-@erase "$(OUTDIR)\win32.obj"
-@erase "$(INTDIR)\wchar.obj"
-@erase "$(INTDIR)\encnames.obj"
-@erase "$(INTDIR)\pthread-win32.obj"
-@erase "$(OUTDIR)\$(OUTFILENAME).lib"
-@erase "$(OUTDIR)\$(OUTFILENAME)dll.lib"
-@erase "$(OUTDIR)\libpq.res"
-@erase "$(OUTDIR)\$(OUTFILENAME).dll"
-@erase "$(OUTDIR)\$(OUTFILENAME).tds"
-@erase "$(INTDIR)\pg_config_paths.h"
LIB32=tlib.exe
LIB32_FLAGS=
LIB32_OBJS= \
"$(INTDIR)\win32.obj" \
"$(INTDIR)\getaddrinfo.obj" \
"$(INTDIR)\pgstrcasecmp.obj" \
"$(INTDIR)\thread.obj" \
"$(INTDIR)\inet_aton.obj" \
"$(INTDIR)\crypt.obj" \
"$(INTDIR)\noblock.obj" \
"$(INTDIR)\md5.obj" \
"$(INTDIR)\ip.obj" \
"$(INTDIR)\fe-auth.obj" \
"$(INTDIR)\fe-protocol2.obj" \
"$(INTDIR)\fe-protocol3.obj" \
"$(INTDIR)\fe-connect.obj" \
"$(INTDIR)\fe-exec.obj" \
"$(INTDIR)\fe-lobj.obj" \
"$(INTDIR)\fe-misc.obj" \
"$(INTDIR)\fe-print.obj" \
"$(INTDIR)\fe-secure.obj" \
"$(INTDIR)\pqexpbuffer.obj" \
"$(INTDIR)\pqsignal.obj" \
"$(INTDIR)\wchar.obj" \
"$(INTDIR)\encnames.obj" \
"$(INTDIR)\pthread-win32.obj"
RSC=brcc32.exe
RSC_PROJ=-l 0x409 -i$(BCB)\include -fo"$(INTDIR)\libpq.res"
LINK32=ilink32.exe
LINK32_FLAGS = -Gn -L$(BCB)\lib;$(INTDIR); -x -Tpd -v
LINK32_OBJS= "$(INTDIR)\libpqdll.obj"
ALL: config "$(OUTDIR)" "$(OUTDIR)\blibpq.dll" "$(OUTDIR)\blibpq.lib"
config: ..\..\include\pg_config.h pthread.h pg_config_paths.h
..\..\include\pg_config.h: ..\..\include\pg_config.h.win32
copy ..\..\include\pg_config.h.win32 ..\..\include\pg_config.h
pthread.h: pthread.h.win32
copy pthread.h.win32 pthread.h
pg_config_paths.h: win32.mak
echo #define SYSCONFDIR "" > pg_config_paths.h
"$(OUTDIR)" :
@if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
/* @&&! is a Response file, http://users.deltacomm.com/edmulroy/howto8.htm */
"$(OUTDIR)\blibpq.dll": "$(OUTDIR)\blibpq.lib" $(LINK32_OBJS) "$(INTDIR)\libpq.res" blibpqdll.def
$(LINK32) @&&!
$(LINK32_FLAGS) +
c0d32.obj $(LINK32_OBJS), +
$@,, +
"$(OUTDIR)\blibpq.lib" import32.lib cw32mti.lib, +
blibpqdll.def,"$(INTDIR)\libpq.res"
!
implib -w "$(OUTDIR)\blibpqdll.lib" blibpqdll.def $@
"$(INTDIR)\libpq.res" : "$(INTDIR)" libpq.rc
$(RSC) $(RSC_PROJ) libpq.rc
"$(OUTDIR)\blibpq.lib": $(LIB32_OBJS)
$(LIB32) $@ @&&!
+-"$(**: =" &^
+-")"
!
"$(INTDIR)\getaddrinfo.obj" : ..\..\port\getaddrinfo.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\port\getaddrinfo.c
!
"$(INTDIR)\pgstrcasecmp.obj" : ..\..\port\pgstrcasecmp.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\port\pgstrcasecmp.c
!
"$(INTDIR)\thread.obj" : ..\..\port\thread.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\port\thread.c
!
"$(INTDIR)\inet_aton.obj" : ..\..\port\inet_aton.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\port\inet_aton.c
!
"$(INTDIR)\crypt.obj" : ..\..\port\crypt.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\port\crypt.c
!
"$(INTDIR)\noblock.obj" : ..\..\port\noblock.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\port\noblock.c
!
"$(INTDIR)\md5.obj" : ..\..\backend\libpq\md5.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\backend\libpq\md5.c
!
"$(INTDIR)\ip.obj" : ..\..\backend\libpq\ip.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\backend\libpq\ip.c
!
"$(INTDIR)\wchar.obj" : ..\..\backend\utils\mb\wchar.c
$(CPP) @&&!
$(CPP_PROJ) /I "." ..\..\backend\utils\mb\wchar.c
!
"$(INTDIR)\encnames.obj" : ..\..\backend\utils\mb\encnames.c
$(CPP) @&&!
$(CPP_PROJ) /I "." ..\..\backend\utils\mb\encnames.c
!
.c.obj:
$(CPP) -o"$(INTDIR)\$&" $(CPP_PROJ) $<
Attachments:
[text/plain] /pg/interfaces/libpq/bcc32.mak (5.4K, ../../200503072121.j27LLnD17741@candle.pha.pa.us/2-%2Fpg%2Finterfaces%2Flibpq%2Fbcc32.mak)
download | inline:
# Makefile for Borland C++ 5.5
# Will build a Win32 static library libpq.lib
# and a Win32 dynamic library libpq.dll with import library libpqdll.lib
# Borland C++ base install directory goes here
# BCB=d:\Borland\Bcc55
!MESSAGE Building the Win32 DLL and Static Library...
!MESSAGE
!IF "$(CFG)" == ""
CFG=Release
!MESSAGE No configuration specified. Defaulting to Release.
!MESSAGE
!ELSE
!MESSAGE Configuration "$(CFG)"
!MESSAGE
!ENDIF
!IF "$(CFG)" != "Release" && "$(CFG)" != "Debug"
!MESSAGE Invalid configuration "$(CFG)" specified.
!MESSAGE You can specify a configuration when running MAKE
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE
!MESSAGE make -DCFG=[Release | Debug] /f bcc32.mak
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "Release" (Win32 Release DLL and Static Library)
!MESSAGE "Debug" (Win32 Debug DLL and Static Library)
!MESSAGE
!ERROR An invalid configuration was specified.
!ENDIF
!IF "$(OS)" == "Windows_NT"
NULL=
!ELSE
NULL=nul
!ENDIF
!IF "$(CFG)" == "Debug"
DEBUG=1
OUTDIR=.\Debug
INTDIR=.\Debug
!ELSE
OUTDIR=.\Release
INTDIR=.\Release
!ENDIF
OUTFILENAME=blibpq
USERDEFINES=FRONTEND;NDEBUG;WIN32;_WINDOWS;HAVE_VSNPRINTF;HAVE_STRDUP;
CPP=bcc32.exe
CPP_PROJ = -I$(BCB)\include;..\..\include -WD -c -D$(USERDEFINES) -tWM \
-a8 -X -w-use -w-par -w-pia -w-csu -w-aus -w-ccc
!IFDEF DEBUG
CPP_PROJ = $(CPP_PROJ) -Od -r- -k -v -y -vi- -D_DEBUG
!else
CPP_PROJ = $(CPP_PROJ) -O -Oi -OS -DNDEBUG
!endif
CLEAN :
-@erase "$(INTDIR)\getaddrinfo.obj"
-@erase "$(INTDIR)\pgstrcasecmp.obj"
-@erase "$(INTDIR)\thread.obj"
-@erase "$(INTDIR)\inet_aton.obj"
-@erase "$(INTDIR)\crypt.obj"
-@erase "$(INTDIR)\noblock.obj"
-@erase "$(INTDIR)\md5.obj"
-@erase "$(INTDIR)\ip.obj"
-@erase "$(INTDIR)\fe-auth.obj"
-@erase "$(INTDIR)\fe-protocol2.obj"
-@erase "$(INTDIR)\fe-protocol3.obj"
-@erase "$(INTDIR)\fe-connect.obj"
-@erase "$(INTDIR)\fe-exec.obj"
-@erase "$(INTDIR)\fe-lobj.obj"
-@erase "$(INTDIR)\fe-misc.obj"
-@erase "$(INTDIR)\fe-print.obj"
-@erase "$(INTDIR)\fe-secure.obj"
-@erase "$(INTDIR)\pqexpbuffer.obj"
-@erase "$(INTDIR)\pqsignal.obj"
-@erase "$(OUTDIR)\libpqdll.obj"
-@erase "$(OUTDIR)\win32.obj"
-@erase "$(INTDIR)\wchar.obj"
-@erase "$(INTDIR)\encnames.obj"
-@erase "$(INTDIR)\pthread-win32.obj"
-@erase "$(OUTDIR)\$(OUTFILENAME).lib"
-@erase "$(OUTDIR)\$(OUTFILENAME)dll.lib"
-@erase "$(OUTDIR)\libpq.res"
-@erase "$(OUTDIR)\$(OUTFILENAME).dll"
-@erase "$(OUTDIR)\$(OUTFILENAME).tds"
-@erase "$(INTDIR)\pg_config_paths.h"
LIB32=tlib.exe
LIB32_FLAGS=
LIB32_OBJS= \
"$(INTDIR)\win32.obj" \
"$(INTDIR)\getaddrinfo.obj" \
"$(INTDIR)\pgstrcasecmp.obj" \
"$(INTDIR)\thread.obj" \
"$(INTDIR)\inet_aton.obj" \
"$(INTDIR)\crypt.obj" \
"$(INTDIR)\noblock.obj" \
"$(INTDIR)\md5.obj" \
"$(INTDIR)\ip.obj" \
"$(INTDIR)\fe-auth.obj" \
"$(INTDIR)\fe-protocol2.obj" \
"$(INTDIR)\fe-protocol3.obj" \
"$(INTDIR)\fe-connect.obj" \
"$(INTDIR)\fe-exec.obj" \
"$(INTDIR)\fe-lobj.obj" \
"$(INTDIR)\fe-misc.obj" \
"$(INTDIR)\fe-print.obj" \
"$(INTDIR)\fe-secure.obj" \
"$(INTDIR)\pqexpbuffer.obj" \
"$(INTDIR)\pqsignal.obj" \
"$(INTDIR)\wchar.obj" \
"$(INTDIR)\encnames.obj" \
"$(INTDIR)\pthread-win32.obj"
RSC=brcc32.exe
RSC_PROJ=-l 0x409 -i$(BCB)\include -fo"$(INTDIR)\libpq.res"
LINK32=ilink32.exe
LINK32_FLAGS = -Gn -L$(BCB)\lib;$(INTDIR); -x -Tpd -v
LINK32_OBJS= "$(INTDIR)\libpqdll.obj"
ALL: config "$(OUTDIR)" "$(OUTDIR)\blibpq.dll" "$(OUTDIR)\blibpq.lib"
config: ..\..\include\pg_config.h pthread.h pg_config_paths.h
..\..\include\pg_config.h: ..\..\include\pg_config.h.win32
copy ..\..\include\pg_config.h.win32 ..\..\include\pg_config.h
pthread.h: pthread.h.win32
copy pthread.h.win32 pthread.h
pg_config_paths.h: win32.mak
echo #define SYSCONFDIR "" > pg_config_paths.h
"$(OUTDIR)" :
@if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
/* @&&! is a Response file, http://users.deltacomm.com/edmulroy/howto8.htm */
"$(OUTDIR)\blibpq.dll": "$(OUTDIR)\blibpq.lib" $(LINK32_OBJS) "$(INTDIR)\libpq.res" blibpqdll.def
$(LINK32) @&&!
$(LINK32_FLAGS) +
c0d32.obj $(LINK32_OBJS), +
$@,, +
"$(OUTDIR)\blibpq.lib" import32.lib cw32mti.lib, +
blibpqdll.def,"$(INTDIR)\libpq.res"
!
implib -w "$(OUTDIR)\blibpqdll.lib" blibpqdll.def $@
"$(INTDIR)\libpq.res" : "$(INTDIR)" libpq.rc
$(RSC) $(RSC_PROJ) libpq.rc
"$(OUTDIR)\blibpq.lib": $(LIB32_OBJS)
$(LIB32) $@ @&&!
+-"$(**: =" &^
+-")"
!
"$(INTDIR)\getaddrinfo.obj" : ..\..\port\getaddrinfo.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\port\getaddrinfo.c
!
"$(INTDIR)\pgstrcasecmp.obj" : ..\..\port\pgstrcasecmp.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\port\pgstrcasecmp.c
!
"$(INTDIR)\thread.obj" : ..\..\port\thread.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\port\thread.c
!
"$(INTDIR)\inet_aton.obj" : ..\..\port\inet_aton.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\port\inet_aton.c
!
"$(INTDIR)\crypt.obj" : ..\..\port\crypt.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\port\crypt.c
!
"$(INTDIR)\noblock.obj" : ..\..\port\noblock.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\port\noblock.c
!
"$(INTDIR)\md5.obj" : ..\..\backend\libpq\md5.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\backend\libpq\md5.c
!
"$(INTDIR)\ip.obj" : ..\..\backend\libpq\ip.c
$(CPP) @&&!
$(CPP_PROJ) ..\..\backend\libpq\ip.c
!
"$(INTDIR)\wchar.obj" : ..\..\backend\utils\mb\wchar.c
$(CPP) @&&!
$(CPP_PROJ) /I "." ..\..\backend\utils\mb\wchar.c
!
"$(INTDIR)\encnames.obj" : ..\..\backend\utils\mb\encnames.c
$(CPP) @&&!
$(CPP_PROJ) /I "." ..\..\backend\utils\mb\encnames.c
!
.c.obj:
$(CPP) -o"$(INTDIR)\$&" $(CPP_PROJ) $<
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: [INTERFACES] bcc32.mak for libpq broken? (distro 8.0.0)
@ 2005-03-12 06:32 Bruce Momjian <pgman@candle.pha.pa.us>
0 siblings, 0 replies; 5+ messages in thread
From: Bruce Momjian @ 2005-03-12 06:32 UTC (permalink / raw)
To: Berényi Gábor <ber_@freemail.hu>; +Cc: PostgreSQL-patches <pgsql-patches@postgresql.org>
Berényi Gábor wrote:
> Hello Bruce,
> The output: 29 rows, each consists of the single message "file not
> found".
> Should I send you a bcc makefile that works? have one for my project
> that the IDE created automatically - if you think it helps to understand
> the syntax.
Great, sure, send it over.
--
Bruce Momjian | http://candle.pha.pa.us
pgman@candle.pha.pa.us | (610) 359-1001
+ If your life is a hard drive, | 13 Roberts Road
+ Christ can be your backup. | Newtown Square, Pennsylvania 19073
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: bcc32.mak for libpq broken? (distro 8.0.0)
@ 2005-05-12 10:51 Pavel Golub <pavel@microolap.com>
2005-05-13 18:23 ` Re: bcc32.mak for libpq broken? (distro 8.0.0) Bruce Momjian <pgman@candle.pha.pa.us>
0 siblings, 1 reply; 5+ messages in thread
From: Pavel Golub @ 2005-05-12 10:51 UTC (permalink / raw)
To: pgsql-interfaces; +Cc: ber_@freemail.hu; pgman@candle.pha.pa.us
Hello.
Guys, sorry that use your private mails.
It seems that I found error about bcc32.mak
The thing is that libpq\bcc32.mak and \psql\bcc32.mak waits that make
will be executed with -N option, but it is not. Why not? For this we
must look at \src\bcc32.mak
>>===============
...
ALL:
cd include
if not exist pg_config.h copy pg_config.h.win32 pg_config.h
cd ..
cd interfaces\libpq
make -DCFG=$(CFG) /f bcc32.mak # This line executes make without -N option
cd ..\..\bin\psql
make -DCFG=$(CFG) /f bcc32.mak #This one too
cd ..\..
echo All Win32 parts have been built!
...
>>===============
I changed these lines to such view and all seems OK:
make -DCFG=$(CFG) -N /f bcc32.mak
Please, tell me if I wrong cause I'm not so familiar with C. I am
Pascal developer.
And one more question. make executes and then I have sush error
message:
>>===============
...
bcc32.exe -IE:\Bcc55\include;..\..\include -n".\Release" -WD -c -DFRONTE
ND;NDEBUG;WIN32;_WINDOWS;HAVE_VSNPRINTF;HAVE_STRDUP; -tWM -a8 -X -w-use -w-par
-w-pia -w-csu -w-aus -w-ccc -O -Oi -OS -DNDEBUG libpqdll.c
Borland C++ 5.5.1 for Win32 Copyright (c) 1993, 2000 Borland
libpqdll.c:
Fatal: 'libpq.rc' does not exist - don't know how to make it
** error 1 ** deleting ALL
>>===============
Where or how can I get it? Thanks in advance
--
With best wishes,
Pavel mailto:pavel@microolap.com
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: bcc32.mak for libpq broken? (distro 8.0.0)
2005-05-12 10:51 Re: bcc32.mak for libpq broken? (distro 8.0.0) Pavel Golub <pavel@microolap.com>
@ 2005-05-13 18:23 ` Bruce Momjian <pgman@candle.pha.pa.us>
0 siblings, 0 replies; 5+ messages in thread
From: Bruce Momjian @ 2005-05-13 18:23 UTC (permalink / raw)
To: Pavel Golub <pavel@microolap.com>; +Cc: pgsql-interfaces; ber_@freemail.hu
Pavel Golub wrote:
> Hello.
>
> Guys, sorry that use your private mails.
>
> It seems that I found error about bcc32.mak
>
> The thing is that libpq\bcc32.mak and \psql\bcc32.mak waits that make
> will be executed with -N option, but it is not. Why not? For this we
> must look at \src\bcc32.mak
>
> >>===============
> ...
> ALL:
> cd include
> if not exist pg_config.h copy pg_config.h.win32 pg_config.h
> cd ..
> cd interfaces\libpq
> make -DCFG=$(CFG) /f bcc32.mak # This line executes make without -N option
> cd ..\..\bin\psql
> make -DCFG=$(CFG) /f bcc32.mak #This one too
> cd ..\..
> echo All Win32 parts have been built!
> ...
> >>===============
>
> I changed these lines to such view and all seems OK:
>
> make -DCFG=$(CFG) -N /f bcc32.mak
Yep, I just added -N to that file. I had forgotten it was there at the
top level. The fix will be in 8.0.X. Add them to all the 'make' lines,
including the 'clean' ones.
> Please, tell me if I wrong cause I'm not so familiar with C. I am
> Pascal developer.
>
> And one more question. make executes and then I have sush error
> message:
>
> >>===============
> ...
>
> bcc32.exe -IE:\Bcc55\include;..\..\include -n".\Release" -WD -c -DFRONTE
> ND;NDEBUG;WIN32;_WINDOWS;HAVE_VSNPRINTF;HAVE_STRDUP; -tWM -a8 -X -w-use -w-par
> -w-pia -w-csu -w-aus -w-ccc -O -Oi -OS -DNDEBUG libpqdll.c
> Borland C++ 5.5.1 for Win32 Copyright (c) 1993, 2000 Borland
> libpqdll.c:
> Fatal: 'libpq.rc' does not exist - don't know how to make it
>
> ** error 1 ** deleting ALL
> >>===============
>
> Where or how can I get it? Thanks in advance
Now that seems strange. Don't you have libpq.rc in your
src/interfaces/libpq directory? I do, and the make build works fine.
Have you tried running the bcc32.mak directly from the interfaces/libpq
directory? Maybe that would help.
--
Bruce Momjian | http://candle.pha.pa.us
pgman@candle.pha.pa.us | (610) 359-1001
+ If your life is a hard drive, | 13 Roberts Road
+ Christ can be your backup. | Newtown Square, Pennsylvania 19073
^ permalink raw reply [nested|flat] 5+ messages in thread
end of thread, other threads:[~2005-05-13 18:23 UTC | newest]
Thread overview: 5+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2005-02-20 17:09 bcc32.mak for libpq broken? (distro 8.0.0) =?ISO-8859-2?Q?Ber=E9nyi_G=E1bor?= <ber_@freemail.hu>
2005-03-07 21:21 Re: [INTERFACES] bcc32.mak for libpq broken? (distro 8.0.0) Bruce Momjian <pgman@candle.pha.pa.us>
2005-03-12 06:32 Re: [INTERFACES] bcc32.mak for libpq broken? (distro 8.0.0) Bruce Momjian <pgman@candle.pha.pa.us>
2005-05-12 10:51 Re: bcc32.mak for libpq broken? (distro 8.0.0) Pavel Golub <pavel@microolap.com>
2005-05-13 18:23 ` Bruce Momjian <pgman@candle.pha.pa.us>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox