pg.ddx.io pgsql-interfaces@postgresql.org mailing list archive
help / color / mirror / Atom feedbcc32 libpq compile problem
8+ messages / 3 participants
[nested] [flat]
* bcc32 libpq compile problem
@ 2005-04-27 11:53 f.guidi@libero.it <f.guidi@libero.it>
0 siblings, 1 reply; 8+ messages in thread
From: f.guidi@libero.it @ 2005-04-27 11:53 UTC (permalink / raw)
To: pgsql-interfaces
hello, i need to compile a c program with borland bcc 5.5.
I try to link the lib included with the windows package but the compiler give me an error message .
I think i need to rebuild the libpq lib from the source with the borland bcc 5.5.
I try to do this launching this command: make -f bcc32.mak but i receive a series of message like <filename.obj> not found.
I changed the compiler path.
What else i can do to try ?
thanks in advance
Fabio
____________________________________________________________
Navighi a 4 MEGA e i primi 3 mesi sono GRATIS.
Scegli Libero Adsl Flat senza limiti su http://www.libero.it
^ permalink raw reply [nested|flat] 8+ messages in thread
* Re: bcc32 libpq compile problem
@ 2005-04-27 19:53 Bruce Momjian <pgman@candle.pha.pa.us>
parent: f.guidi@libero.it <f.guidi@libero.it>
0 siblings, 0 replies; 8+ messages in thread
From: Bruce Momjian @ 2005-04-27 19:53 UTC (permalink / raw)
To: f.guidi@libero.it <f.guidi@libero.it>; +Cc: pgsql-interfaces
f.guidi@libero.it wrote:
> hello, i need to compile a c program with borland bcc 5.5.
> I try to link the lib included with the windows package but the compiler give me an error message .
> I think i need to rebuild the libpq lib from the source with the borland bcc 5.5.
>
> I try to do this launching this command: make -f bcc32.mak but i receive a series of message like <filename.obj> not found.
>
> I changed the compiler path.
>
> What else i can do to try ?
>
First, use PostgreSQL 8.0.2, and then send us the exact error messages.
--
Bruce Momjian | http://candle.pha.pa.us
pgman@candle.pha.pa.us | (610) 359-1001
+ If your life is a hard drive, | 13 Roberts Road
+ Christ can be your backup. | Newtown Square, Pennsylvania 19073
^ permalink raw reply [nested|flat] 8+ messages in thread
* Re: bcc32 libpq compile problem
@ 2005-04-28 06:48 f.guidi@libero.it <f.guidi@libero.it>
0 siblings, 1 reply; 8+ messages in thread
From: f.guidi@libero.it @ 2005-04-28 06:48 UTC (permalink / raw)
To: pgman <pgman@candle.pha.pa.us>; +Cc: pgsql-interfaces
I done this
1) download the 8.0.2 source
2) unzipping all the tar.gz files in a directory
3) installing the borland c++ 5.5.1 freeware edition
4) in the directory interface libpq i changes the file bcc32.mak with the path of the compiler
5) launch the command make -f bcc32.mak
6) the result is that the directory result is not created and the message is simply that FILE NOT FOUND repeated about 20 times
7) if i create the directory result manually the message change with add the name of files that he don't find xxxx.obj
one question, can i compile directly the libpq or first i need to compile other packages ?
thanks in advance
fabio
> f.guidi@libero.it wrote:
> > hello, i need to compile a c program with borland bcc 5.5.
> > I try to link the lib included with the windows package but the compiler give me an error message .
> > I think i need to rebuild the libpq lib from the source with the borland bcc 5.5.
> >
> > I try to do this launching this command: make -f bcc32.mak but i receive a series of message like <filename.obj> not found.
> >
> > I changed the compiler path.
> >
> > What else i can do to try ?
> >
>
> First, use PostgreSQL 8.0.2, and then send us the exact error messages.
>
> --
> Bruce Momjian | http://candle.pha.pa.us
> pgman@candle.pha.pa.us | (610) 359-1001
> + If your life is a hard drive, | 13 Roberts Road
> + Christ can be your backup. | Newtown Square, Pennsylvania 19073
>
____________________________________________________________
6X velocizzare la tua navigazione a 56k? 6X Web Accelerator di Libero!
Scaricalo su INTERNET GRATIS 6X http://www.libero.it
^ permalink raw reply [nested|flat] 8+ messages in thread
* Re: bcc32 libpq compile problem
@ 2005-04-28 12:11 Bruce Momjian <pgman@candle.pha.pa.us>
parent: f.guidi@libero.it <f.guidi@libero.it>
0 siblings, 0 replies; 8+ messages in thread
From: Bruce Momjian @ 2005-04-28 12:11 UTC (permalink / raw)
To: f.guidi@libero.it <f.guidi@libero.it>; +Cc: pgsql-interfaces
f.guidi@libero.it wrote:
> I done this
> 1) download the 8.0.2 source
> 2) unzipping all the tar.gz files in a directory
> 3) installing the borland c++ 5.5.1 freeware edition
> 4) in the directory interface libpq i changes the file bcc32.mak with the path of the compiler
> 5) launch the command make -f bcc32.mak
> 6) the result is that the directory result is not created and the message is simply that FILE NOT FOUND repeated about 20 times
> 7) if i create the directory result manually the message change with add the name of files that he don't find xxxx.obj
>
> one question, can i compile directly the libpq or first i need to compile other packages ?
You can just compile libpq without other stuff. Please copy/paste the
message into an email.
--
Bruce Momjian | http://candle.pha.pa.us
pgman@candle.pha.pa.us | (610) 359-1001
+ If your life is a hard drive, | 13 Roberts Road
+ Christ can be your backup. | Newtown Square, Pennsylvania 19073
^ permalink raw reply [nested|flat] 8+ messages in thread
* Re: bcc32 libpq compile problem
@ 2005-04-28 13:51 f.guidi@libero.it <f.guidi@libero.it>
0 siblings, 1 reply; 8+ messages in thread
From: f.guidi@libero.it @ 2005-04-28 13:51 UTC (permalink / raw)
To: pgman <pgman@candle.pha.pa.us>; +Cc: pgsql-interfaces
C:\POSTGR~1\POSTGR~1.2\src\INTERF~1\libpq>make -f bcc32.mak
MAKE Version 5.2 Copyright (c) 1987, 2000 Borland
Building the Win32 DLL and Static Library...
No configuration specified. Defaulting to Release.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
The system cannot find the file specified.
C:\POSTGR~1\POSTGR~1.2\src\INTERF~1\libpq>
> f.guidi@libero.it wrote:
> > I done this
> > 1) download the 8.0.2 source
> > 2) unzipping all the tar.gz files in a directory
> > 3) installing the borland c++ 5.5.1 freeware edition
> > 4) in the directory interface libpq i changes the file bcc32.mak with the path of the compiler
> > 5) launch the command make -f bcc32.mak
> > 6) the result is that the directory result is not created and the message is simply that FILE NOT FOUND repeated about 20 times
> > 7) if i create the directory result manually the message change with add the name of files that he don't find xxxx.obj
> >
> > one question, can i compile directly the libpq or first i need to compile other packages ?
>
> You can just compile libpq without other stuff. Please copy/paste the
> message into an email.
> --
> Bruce Momjian | http://candle.pha.pa.us
> pgman@candle.pha.pa.us | (610) 359-1001
> + If your life is a hard drive, | 13 Roberts Road
> + Christ can be your backup. | Newtown Square, Pennsylvania 19073
>
> ---------------------------(end of broadcast)---------------------------
> TIP 4: Don't 'kill -9' the postmaster
>
____________________________________________________________
6X velocizzare la tua navigazione a 56k? 6X Web Accelerator di Libero!
Scaricalo su INTERNET GRATIS 6X http://www.libero.it
^ permalink raw reply [nested|flat] 8+ messages in thread
* Re: bcc32 libpq compile problem
@ 2005-04-28 15:47 Bruce Momjian <pgman@candle.pha.pa.us>
parent: f.guidi@libero.it <f.guidi@libero.it>
0 siblings, 1 reply; 8+ messages in thread
From: Bruce Momjian @ 2005-04-28 15:47 UTC (permalink / raw)
To: f.guidi@libero.it <f.guidi@libero.it>; +Cc: pgsql-interfaces
I downloaded the Borland compiler and am running build tests now.
---------------------------------------------------------------------------
f.guidi@libero.it wrote:
> C:\POSTGR~1\POSTGR~1.2\src\INTERF~1\libpq>make -f bcc32.mak
>
> MAKE Version 5.2 Copyright (c) 1987, 2000 Borland
>
> Building the Win32 DLL and Static Library...
>
>
>
> No configuration specified. Defaulting to Release.
>
>
>
> The system cannot find the file specified.
>
--
Bruce Momjian | http://candle.pha.pa.us
pgman@candle.pha.pa.us | (610) 359-1001
+ If your life is a hard drive, | 13 Roberts Road
+ Christ can be your backup. | Newtown Square, Pennsylvania 19073
^ permalink raw reply [nested|flat] 8+ messages in thread
* Re: bcc32 libpq compile problem
@ 2005-04-28 21:02 Fabio Guidi <f.guidi@libero.it>
parent: Bruce Momjian <pgman@candle.pha.pa.us>
0 siblings, 1 reply; 8+ messages in thread
From: Fabio Guidi @ 2005-04-28 21:02 UTC (permalink / raw)
To: Bruce Momjian <pgman@candle.pha.pa.us>; +Cc: pgsql-interfaces
the compiler build correctly the package without error message ?
Bruce Momjian ha scritto:
>I downloaded the Borland compiler and am running build tests now.
>
>---------------------------------------------------------------------------
>
>f.guidi@libero.it wrote:
>
>
>>C:\POSTGR~1\POSTGR~1.2\src\INTERF~1\libpq>make -f bcc32.mak
>>
>>MAKE Version 5.2 Copyright (c) 1987, 2000 Borland
>>
>>Building the Win32 DLL and Static Library...
>>
>>
>>
>>No configuration specified. Defaulting to Release.
>>
>>
>>
>>The system cannot find the file specified.
>>
>>
>>
>
>
>
^ permalink raw reply [nested|flat] 8+ messages in thread
* Re: [INTERFACES] bcc32 libpq compile problem
@ 2005-04-29 04:22 Bruce Momjian <pgman@candle.pha.pa.us>
parent: Fabio Guidi <f.guidi@libero.it>
0 siblings, 0 replies; 8+ messages in thread
From: Bruce Momjian @ 2005-04-29 04:22 UTC (permalink / raw)
To: Fabio Guidi <f.guidi@libero.it>; +Cc: PostgreSQL-patches <pgsql-patches@postgresql.org>
Fabio Guidi wrote:
> the compiler build correctly the package without error message ?
>
> Bruce Momjian ha scritto:
>
> >I downloaded the Borland compiler and am running build tests now.
I finally got it working. I had to make major changes to the build
file. The new attached bcc32.mak should build on your 8.0.X system, and
this file will be in 8.0.3.
--
Bruce Momjian | http://candle.pha.pa.us
pgman@candle.pha.pa.us | (610) 359-1001
+ If your life is a hard drive, | 13 Roberts Road
+ Christ can be your backup. | Newtown Square, Pennsylvania 19073
# Makefile for Borland C++ 5.5
# Will build a Win32 static library libpq.lib
# and a Win32 dynamic library libpq.dll with import library libpqdll.lib
# Borland C++ base install directory goes here
# BCB=c:\Borland\Bcc55
!IF "$(BCB)" == ""
!MESSAGE You must edit bcc32.mak and define BCB at the top
!ERROR misssing BCB
!ENDIF
!IF "$(__NMAKE__)" == ""
!MESSAGE You must use the -N compatibility flag, e.g. make -N -f bcc32.make
!ERROR missing -N
!ENDIF
!MESSAGE Building the Win32 DLL and Static Library...
!MESSAGE
!IF "$(CFG)" == ""
CFG=Release
!MESSAGE No configuration specified. Defaulting to Release.
!MESSAGE
!ELSE
!MESSAGE Configuration "$(CFG)"
!MESSAGE
!ENDIF
!IF "$(CFG)" != "Release" && "$(CFG)" != "Debug"
!MESSAGE Invalid configuration "$(CFG)" specified.
!MESSAGE You can specify a configuration when running MAKE
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE
!MESSAGE make -N -DCFG=[Release | Debug] -f bcc32.mak
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "Release" (Win32 Release DLL and Static Library)
!MESSAGE "Debug" (Win32 Debug DLL and Static Library)
!MESSAGE
!ERROR An invalid configuration was specified.
!ENDIF
!IF "$(OS)" == "Windows_NT"
NULL=
!ELSE
NULL=nul
!ENDIF
!IF "$(CFG)" == "Debug"
DEBUG=1
OUTDIR=.\Debug
INTDIR=.\Debug
!ELSE
OUTDIR=.\Release
INTDIR=.\Release
!ENDIF
OUTFILENAME=blibpq
USERDEFINES=FRONTEND;NDEBUG;WIN32;_WINDOWS;HAVE_VSNPRINTF;HAVE_STRDUP;
CPP=bcc32.exe
CPP_PROJ = -I$(BCB)\include;..\..\include -n"$(INTDIR)" -WD -c -D$(USERDEFINES) -tWM \
-a8 -X -w-use -w-par -w-pia -w-csu -w-aus -w-ccc
!IFDEF DEBUG
CPP_PROJ = $(CPP_PROJ) -Od -r- -k -v -y -vi- -D_DEBUG
!else
CPP_PROJ = $(CPP_PROJ) -O -Oi -OS -DNDEBUG
!endif
ALL : config "$(OUTDIR)" "$(OUTDIR)\blibpq.dll" "$(OUTDIR)\blibpq.lib"
CLEAN :
-@erase "$(INTDIR)\getaddrinfo.obj"
-@erase "$(INTDIR)\pgstrcasecmp.obj"
-@erase "$(INTDIR)\thread.obj"
-@erase "$(INTDIR)\inet_aton.obj"
-@erase "$(INTDIR)\crypt.obj"
-@erase "$(INTDIR)\noblock.obj"
-@erase "$(INTDIR)\md5.obj"
-@erase "$(INTDIR)\ip.obj"
-@erase "$(INTDIR)\fe-auth.obj"
-@erase "$(INTDIR)\fe-protocol2.obj"
-@erase "$(INTDIR)\fe-protocol3.obj"
-@erase "$(INTDIR)\fe-connect.obj"
-@erase "$(INTDIR)\fe-exec.obj"
-@erase "$(INTDIR)\fe-lobj.obj"
-@erase "$(INTDIR)\fe-misc.obj"
-@erase "$(INTDIR)\fe-print.obj"
-@erase "$(INTDIR)\fe-secure.obj"
-@erase "$(INTDIR)\pqexpbuffer.obj"
-@erase "$(INTDIR)\pqsignal.obj"
-@erase "$(OUTDIR)\libpqdll.obj"
-@erase "$(OUTDIR)\win32.obj"
-@erase "$(INTDIR)\wchar.obj"
-@erase "$(INTDIR)\encnames.obj"
-@erase "$(INTDIR)\pthread-win32.obj"
-@erase "$(OUTDIR)\$(OUTFILENAME).lib"
-@erase "$(OUTDIR)\$(OUTFILENAME)dll.lib"
-@erase "$(OUTDIR)\libpq.res"
-@erase "$(OUTDIR)\$(OUTFILENAME).dll"
-@erase "$(OUTDIR)\$(OUTFILENAME).tds"
-@erase "$(INTDIR)\pg_config_paths.h"
LIB32=tlib.exe
LIB32_FLAGS=
LIB32_OBJS= \
"$(INTDIR)\win32.obj" \
"$(INTDIR)\getaddrinfo.obj" \
"$(INTDIR)\pgstrcasecmp.obj" \
"$(INTDIR)\thread.obj" \
"$(INTDIR)\inet_aton.obj" \
"$(INTDIR)\crypt.obj" \
"$(INTDIR)\noblock.obj" \
"$(INTDIR)\md5.obj" \
"$(INTDIR)\ip.obj" \
"$(INTDIR)\fe-auth.obj" \
"$(INTDIR)\fe-protocol2.obj" \
"$(INTDIR)\fe-protocol3.obj" \
"$(INTDIR)\fe-connect.obj" \
"$(INTDIR)\fe-exec.obj" \
"$(INTDIR)\fe-lobj.obj" \
"$(INTDIR)\fe-misc.obj" \
"$(INTDIR)\fe-print.obj" \
"$(INTDIR)\fe-secure.obj" \
"$(INTDIR)\pqexpbuffer.obj" \
"$(INTDIR)\pqsignal.obj" \
"$(INTDIR)\wchar.obj" \
"$(INTDIR)\encnames.obj" \
"$(INTDIR)\pthread-win32.obj"
config: ..\..\include\pg_config.h pthread.h pg_config_paths.h
..\..\include\pg_config.h: ..\..\include\pg_config.h.win32
copy ..\..\include\pg_config.h.win32 ..\..\include\pg_config.h
pthread.h: pthread.h.win32
copy pthread.h.win32 pthread.h
pg_config_paths.h: bcc32.mak
echo \#define SYSCONFDIR "" > pg_config_paths.h
"$(OUTDIR)" :
@if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
RSC=brcc32.exe
RSC_PROJ=-l 0x409 -i$(BCB)\include -fo"$(INTDIR)\libpq.res"
LINK32=ilink32.exe
LINK32_FLAGS = -Gn -L$(BCB)\lib;$(INTDIR); -x -Tpd -v
LINK32_OBJS= "$(INTDIR)\libpqdll.obj"
# @<< is a Response file, http://www.opussoftware.com/tutorial/TutMakefile.htm
"$(OUTDIR)\blibpq.dll": "$(OUTDIR)\blibpq.lib" $(LINK32_OBJS) "$(INTDIR)\libpq.res" blibpqdll.def
$(LINK32) @<<
$(LINK32_FLAGS) +
c0d32.obj $(LINK32_OBJS), +
$@,, +
"$(OUTDIR)\blibpq.lib" import32.lib cw32mti.lib, +
blibpqdll.def,"$(INTDIR)\libpq.res"
<<
implib -w "$(OUTDIR)\blibpqdll.lib" blibpqdll.def $@
"$(INTDIR)\libpq.res" : "$(INTDIR)" libpq.rc
$(RSC) $(RSC_PROJ) libpq.rc
"$(OUTDIR)\blibpq.lib": $(LIB32_OBJS)
$(LIB32) $@ @<<
+-"$(**: =" &^
+-")"
<<
"$(INTDIR)\getaddrinfo.obj" : ..\..\port\getaddrinfo.c
$(CPP) @<<
$(CPP_PROJ) ..\..\port\getaddrinfo.c
<<
"$(INTDIR)\pgstrcasecmp.obj" : ..\..\port\pgstrcasecmp.c
$(CPP) @<<
$(CPP_PROJ) ..\..\port\pgstrcasecmp.c
<<
"$(INTDIR)\thread.obj" : ..\..\port\thread.c
$(CPP) @<<
$(CPP_PROJ) ..\..\port\thread.c
<<
"$(INTDIR)\inet_aton.obj" : ..\..\port\inet_aton.c
$(CPP) @<<
$(CPP_PROJ) ..\..\port\inet_aton.c
<<
"$(INTDIR)\crypt.obj" : ..\..\port\crypt.c
$(CPP) @<<
$(CPP_PROJ) ..\..\port\crypt.c
<<
"$(INTDIR)\noblock.obj" : ..\..\port\noblock.c
$(CPP) @<<
$(CPP_PROJ) ..\..\port\noblock.c
<<
"$(INTDIR)\md5.obj" : ..\..\backend\libpq\md5.c
$(CPP) @<<
$(CPP_PROJ) ..\..\backend\libpq\md5.c
<<
"$(INTDIR)\ip.obj" : ..\..\backend\libpq\ip.c
$(CPP) @<<
$(CPP_PROJ) ..\..\backend\libpq\ip.c
<<
"$(INTDIR)\wchar.obj" : ..\..\backend\utils\mb\wchar.c
$(CPP) @<<
$(CPP_PROJ) /I"." ..\..\backend\utils\mb\wchar.c
<<
"$(INTDIR)\encnames.obj" : ..\..\backend\utils\mb\encnames.c
$(CPP) @<<
$(CPP_PROJ) /I"." ..\..\backend\utils\mb\encnames.c
<<
.c.obj:
$(CPP) $(CPP_PROJ) $<
Attachments:
[text/plain] /pgrel/interfaces/libpq/bcc32.mak (5.7K, ../../200504290422.j3T4MxS23009@candle.pha.pa.us/2-%2Fpgrel%2Finterfaces%2Flibpq%2Fbcc32.mak)
download | inline:
# Makefile for Borland C++ 5.5
# Will build a Win32 static library libpq.lib
# and a Win32 dynamic library libpq.dll with import library libpqdll.lib
# Borland C++ base install directory goes here
# BCB=c:\Borland\Bcc55
!IF "$(BCB)" == ""
!MESSAGE You must edit bcc32.mak and define BCB at the top
!ERROR misssing BCB
!ENDIF
!IF "$(__NMAKE__)" == ""
!MESSAGE You must use the -N compatibility flag, e.g. make -N -f bcc32.make
!ERROR missing -N
!ENDIF
!MESSAGE Building the Win32 DLL and Static Library...
!MESSAGE
!IF "$(CFG)" == ""
CFG=Release
!MESSAGE No configuration specified. Defaulting to Release.
!MESSAGE
!ELSE
!MESSAGE Configuration "$(CFG)"
!MESSAGE
!ENDIF
!IF "$(CFG)" != "Release" && "$(CFG)" != "Debug"
!MESSAGE Invalid configuration "$(CFG)" specified.
!MESSAGE You can specify a configuration when running MAKE
!MESSAGE by defining the macro CFG on the command line. For example:
!MESSAGE
!MESSAGE make -N -DCFG=[Release | Debug] -f bcc32.mak
!MESSAGE
!MESSAGE Possible choices for configuration are:
!MESSAGE
!MESSAGE "Release" (Win32 Release DLL and Static Library)
!MESSAGE "Debug" (Win32 Debug DLL and Static Library)
!MESSAGE
!ERROR An invalid configuration was specified.
!ENDIF
!IF "$(OS)" == "Windows_NT"
NULL=
!ELSE
NULL=nul
!ENDIF
!IF "$(CFG)" == "Debug"
DEBUG=1
OUTDIR=.\Debug
INTDIR=.\Debug
!ELSE
OUTDIR=.\Release
INTDIR=.\Release
!ENDIF
OUTFILENAME=blibpq
USERDEFINES=FRONTEND;NDEBUG;WIN32;_WINDOWS;HAVE_VSNPRINTF;HAVE_STRDUP;
CPP=bcc32.exe
CPP_PROJ = -I$(BCB)\include;..\..\include -n"$(INTDIR)" -WD -c -D$(USERDEFINES) -tWM \
-a8 -X -w-use -w-par -w-pia -w-csu -w-aus -w-ccc
!IFDEF DEBUG
CPP_PROJ = $(CPP_PROJ) -Od -r- -k -v -y -vi- -D_DEBUG
!else
CPP_PROJ = $(CPP_PROJ) -O -Oi -OS -DNDEBUG
!endif
ALL : config "$(OUTDIR)" "$(OUTDIR)\blibpq.dll" "$(OUTDIR)\blibpq.lib"
CLEAN :
-@erase "$(INTDIR)\getaddrinfo.obj"
-@erase "$(INTDIR)\pgstrcasecmp.obj"
-@erase "$(INTDIR)\thread.obj"
-@erase "$(INTDIR)\inet_aton.obj"
-@erase "$(INTDIR)\crypt.obj"
-@erase "$(INTDIR)\noblock.obj"
-@erase "$(INTDIR)\md5.obj"
-@erase "$(INTDIR)\ip.obj"
-@erase "$(INTDIR)\fe-auth.obj"
-@erase "$(INTDIR)\fe-protocol2.obj"
-@erase "$(INTDIR)\fe-protocol3.obj"
-@erase "$(INTDIR)\fe-connect.obj"
-@erase "$(INTDIR)\fe-exec.obj"
-@erase "$(INTDIR)\fe-lobj.obj"
-@erase "$(INTDIR)\fe-misc.obj"
-@erase "$(INTDIR)\fe-print.obj"
-@erase "$(INTDIR)\fe-secure.obj"
-@erase "$(INTDIR)\pqexpbuffer.obj"
-@erase "$(INTDIR)\pqsignal.obj"
-@erase "$(OUTDIR)\libpqdll.obj"
-@erase "$(OUTDIR)\win32.obj"
-@erase "$(INTDIR)\wchar.obj"
-@erase "$(INTDIR)\encnames.obj"
-@erase "$(INTDIR)\pthread-win32.obj"
-@erase "$(OUTDIR)\$(OUTFILENAME).lib"
-@erase "$(OUTDIR)\$(OUTFILENAME)dll.lib"
-@erase "$(OUTDIR)\libpq.res"
-@erase "$(OUTDIR)\$(OUTFILENAME).dll"
-@erase "$(OUTDIR)\$(OUTFILENAME).tds"
-@erase "$(INTDIR)\pg_config_paths.h"
LIB32=tlib.exe
LIB32_FLAGS=
LIB32_OBJS= \
"$(INTDIR)\win32.obj" \
"$(INTDIR)\getaddrinfo.obj" \
"$(INTDIR)\pgstrcasecmp.obj" \
"$(INTDIR)\thread.obj" \
"$(INTDIR)\inet_aton.obj" \
"$(INTDIR)\crypt.obj" \
"$(INTDIR)\noblock.obj" \
"$(INTDIR)\md5.obj" \
"$(INTDIR)\ip.obj" \
"$(INTDIR)\fe-auth.obj" \
"$(INTDIR)\fe-protocol2.obj" \
"$(INTDIR)\fe-protocol3.obj" \
"$(INTDIR)\fe-connect.obj" \
"$(INTDIR)\fe-exec.obj" \
"$(INTDIR)\fe-lobj.obj" \
"$(INTDIR)\fe-misc.obj" \
"$(INTDIR)\fe-print.obj" \
"$(INTDIR)\fe-secure.obj" \
"$(INTDIR)\pqexpbuffer.obj" \
"$(INTDIR)\pqsignal.obj" \
"$(INTDIR)\wchar.obj" \
"$(INTDIR)\encnames.obj" \
"$(INTDIR)\pthread-win32.obj"
config: ..\..\include\pg_config.h pthread.h pg_config_paths.h
..\..\include\pg_config.h: ..\..\include\pg_config.h.win32
copy ..\..\include\pg_config.h.win32 ..\..\include\pg_config.h
pthread.h: pthread.h.win32
copy pthread.h.win32 pthread.h
pg_config_paths.h: bcc32.mak
echo \#define SYSCONFDIR "" > pg_config_paths.h
"$(OUTDIR)" :
@if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)"
RSC=brcc32.exe
RSC_PROJ=-l 0x409 -i$(BCB)\include -fo"$(INTDIR)\libpq.res"
LINK32=ilink32.exe
LINK32_FLAGS = -Gn -L$(BCB)\lib;$(INTDIR); -x -Tpd -v
LINK32_OBJS= "$(INTDIR)\libpqdll.obj"
# @<< is a Response file, http://www.opussoftware.com/tutorial/TutMakefile.htm
"$(OUTDIR)\blibpq.dll": "$(OUTDIR)\blibpq.lib" $(LINK32_OBJS) "$(INTDIR)\libpq.res" blibpqdll.def
$(LINK32) @<<
$(LINK32_FLAGS) +
c0d32.obj $(LINK32_OBJS), +
$@,, +
"$(OUTDIR)\blibpq.lib" import32.lib cw32mti.lib, +
blibpqdll.def,"$(INTDIR)\libpq.res"
<<
implib -w "$(OUTDIR)\blibpqdll.lib" blibpqdll.def $@
"$(INTDIR)\libpq.res" : "$(INTDIR)" libpq.rc
$(RSC) $(RSC_PROJ) libpq.rc
"$(OUTDIR)\blibpq.lib": $(LIB32_OBJS)
$(LIB32) $@ @<<
+-"$(**: =" &^
+-")"
<<
"$(INTDIR)\getaddrinfo.obj" : ..\..\port\getaddrinfo.c
$(CPP) @<<
$(CPP_PROJ) ..\..\port\getaddrinfo.c
<<
"$(INTDIR)\pgstrcasecmp.obj" : ..\..\port\pgstrcasecmp.c
$(CPP) @<<
$(CPP_PROJ) ..\..\port\pgstrcasecmp.c
<<
"$(INTDIR)\thread.obj" : ..\..\port\thread.c
$(CPP) @<<
$(CPP_PROJ) ..\..\port\thread.c
<<
"$(INTDIR)\inet_aton.obj" : ..\..\port\inet_aton.c
$(CPP) @<<
$(CPP_PROJ) ..\..\port\inet_aton.c
<<
"$(INTDIR)\crypt.obj" : ..\..\port\crypt.c
$(CPP) @<<
$(CPP_PROJ) ..\..\port\crypt.c
<<
"$(INTDIR)\noblock.obj" : ..\..\port\noblock.c
$(CPP) @<<
$(CPP_PROJ) ..\..\port\noblock.c
<<
"$(INTDIR)\md5.obj" : ..\..\backend\libpq\md5.c
$(CPP) @<<
$(CPP_PROJ) ..\..\backend\libpq\md5.c
<<
"$(INTDIR)\ip.obj" : ..\..\backend\libpq\ip.c
$(CPP) @<<
$(CPP_PROJ) ..\..\backend\libpq\ip.c
<<
"$(INTDIR)\wchar.obj" : ..\..\backend\utils\mb\wchar.c
$(CPP) @<<
$(CPP_PROJ) /I"." ..\..\backend\utils\mb\wchar.c
<<
"$(INTDIR)\encnames.obj" : ..\..\backend\utils\mb\encnames.c
$(CPP) @<<
$(CPP_PROJ) /I"." ..\..\backend\utils\mb\encnames.c
<<
.c.obj:
$(CPP) $(CPP_PROJ) $<
^ permalink raw reply [nested|flat] 8+ messages in thread
end of thread, other threads:[~2005-04-29 04:22 UTC | newest]
Thread overview: 8+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2005-04-27 11:53 bcc32 libpq compile problem f.guidi@libero.it <f.guidi@libero.it>
2005-04-27 19:53 ` Bruce Momjian <pgman@candle.pha.pa.us>
2005-04-28 06:48 Re: bcc32 libpq compile problem f.guidi@libero.it <f.guidi@libero.it>
2005-04-28 12:11 ` Bruce Momjian <pgman@candle.pha.pa.us>
2005-04-28 13:51 Re: bcc32 libpq compile problem f.guidi@libero.it <f.guidi@libero.it>
2005-04-28 15:47 ` Bruce Momjian <pgman@candle.pha.pa.us>
2005-04-28 21:02 ` Fabio Guidi <f.guidi@libero.it>
2005-04-29 04:22 ` Bruce Momjian <pgman@candle.pha.pa.us>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox