pg.ddx.io pgsql-interfaces@postgresql.org mailing list archive
help / color / mirror / Atom feedPERL5 interface for POSTGRESQL
2+ messages / 2 participants
[nested] [flat]
* PERL5 interface for POSTGRESQL
@ 2000-12-27 18:28 James Merhaut <jhmerhau@dt1s78.ra.intel.com>
0 siblings, 1 reply; 2+ messages in thread
From: James Merhaut @ 2000-12-27 18:28 UTC (permalink / raw)
To: pgsql-interfaces; +Cc: brian.c.hintzman@intel.com; nandan.gangolli@intel.com
Hi
I have been trying to build the PERL5 interface standalone. I have
had success in compiling and linking. Where I am experiencing
difficulty is with "make test." I get the following diagnostic:
> make test
PERL_DL_NONLAZY=1 /usr/intel/bin/perl -I./blib/arch -I./blib/lib
-I/usr/intel/96r2/lib/perl5/sun4x_55/5.003 -I/usr/intel/96r2/lib/perl5 test.pl
Can't load './blib/arch/auto/Pg/Pg.so' for module Pg: ld.so.1: /usr/intel/bin/perl:
fatal: relocation error: file ./blib/arch/auto/Pg/Pg.so: symbol lo_export: referenced
symbol not found at /usr/intel/96r2/lib/perl5/DynaLoader.pm line 140.
at blib/lib/Pg.pm line 125
BEGIN failed--compilation aborted at test.pl line 12.
test failed
*** Error code 2
make: Fatal error: Command failed for target `test_dynamic'
Any ideas on how this can be resolved?
SOME OTHER BACKGROUND INFO
--------------------------
I built the PERL5 interface using gcc. I changed the switch "-Kpic" to "-fpic."
Compiling and linking went just fine. This was done because we don't have ucbcc.
I have attached the Makefile.
PostgreSQL Version -> V7.0.3
Perl5 Interface Version -> V1.8.0 I found this version number in the Changes file.
SYSTEM INFO:
------------
> uname -a
SunOS dt1s74 5.5.1 Generic_103640-20 sun4u sparc SUNW,Ultra-5_10
PERL INFO:
----------
> /usr/local/bin/perl -v
This is perl, version 5.005_02 built for sun4-solaris
Copyright 1987-1998, Larry Wall
Perl may be copied only under the terms of either the Artistic License or the
GNU General Public License, which may be found in the Perl 5.0 source kit.
Complete documentation for Perl, including FAQ lists, should be found on
this system using `man perl' or `perldoc perl'. If you have access to the
Internet, point your browser at http://www.perl.com/, the Perl Home Page.
> /usr/local/bin/perl -V
Summary of my perl5 (5.0 patchlevel 5 subversion 2) configuration:
Platform:
osname=solaris, osvers=2.5.1, archname=sun4-solaris
uname='sunos dt1s31 5.5.1 generic_103640-20 sun4m sparc sunw,sparcstation-20 '
hint=recommended, useposix=true, d_sigaction=define
usethreads=undef useperlio=undef d_sfio=undef
Compiler:
cc='gcc -B/usr/ccs/bin/', optimize='-O', gccversion=cygnus-2.7-96q4
cppflags='-I/usr/local/include'
ccflags ='-I/usr/local/include'
stdchar='unsigned char', d_stdstdio=define, usevfork=false
intsize=4, longsize=4, ptrsize=4, doublesize=8
d_longlong=define, longlongsize=8, d_longdbl=define, longdblsize=16
alignbytes=8, usemymalloc=y, prototype=define
Linker and Libraries:
ld='gcc -B/usr/ccs/bin/', ldflags =' -L/usr/local/lib'
libpth=/usr/local/lib /lib /usr/lib /usr/ccs/lib
libs=-lsocket -lnsl -lgdbm -ldl -lm -lc -lcrypt
libc=/lib/libc.so, so=so, useshrplib=false, libperl=libperl.a
Dynamic Linking:
dlsrc=dl_dlopen.xs, dlext=so, d_dlsymun=undef, ccdlflags=' '
cccdlflags='-fPIC', lddlflags='-G -L/usr/local/lib'
Characteristics of this binary (from libperl):
Built under solaris
Compiled at Oct 20 1999 12:08:19
@INC:
/usr/local/lib/perl5/5.00502/sun4-solaris
/usr/local/lib/perl5/5.00502
/usr/local/lib/perl5/site_perl/5.005/sun4-solaris
/usr/local/lib/perl5/site_perl/5.005
Attachments:
Makefile (text/plain, 20.6K) download
# This Makefile is for the Pg extension to perl.
#
# It was generated automatically by MakeMaker version
# 5.34 (Revision: 1.202) from the contents of
# Makefile.PL. Don't edit this file, edit Makefile.PL instead.
#
# ANY CHANGES MADE HERE WILL BE LOST!
#
# MakeMaker Parameters:
# INC => q[-I/intel/tua40/eng/sort_class/user_dir/jhmerhau/db/bin/pgsql/bin/include]
# LIBS => [q[-L/intel/tua40/eng/sort_class/user_dir/jhmerhau/db/bin/pgsql/bin/lib -lpq]]
# NAME => q[Pg]
# OBJECT => q[Pg$(OBJ_EXT)]
# VERSION_FROM => q[Pg.pm]
# --- MakeMaker post_initialize section:
# --- MakeMaker const_config section:
# These definitions are from config.sh (via /usr/intel/96r2/lib/perl5/sun4x_55/5.003/Config.pm)
# They may have been overridden via Makefile.PL or on the command line
AR = ar
CC = /usr/intel/bin/gcc
CCCDLFLAGS = -fpic
CCDLFLAGS =
DLEXT = so
DLSRC = dl_dlopen.xs
LD = /usr/intel/bin/gcc
LDDLFLAGS = -G -L/usr/intel/96r2/lib
LDFLAGS = -L/usr/intel/96r2/lib
LIBC = /lib/libc.so
LIB_EXT = .a
OBJ_EXT = .o
RANLIB = :
SO = so
# --- MakeMaker constants section:
AR_STATIC_ARGS = cr
NAME = Pg
DISTNAME = Pg
NAME_SYM = Pg
VERSION = 1.8.0
VERSION_SYM = 1_8_0
XS_VERSION = 1.8.0
INST_BIN = ./blib/bin
INST_EXE = ./blib/script
INST_LIB = ./blib/lib
INST_ARCHLIB = ./blib/arch
INST_SCRIPT = ./blib/script
PREFIX = /usr/intel/96r2
INSTALLDIRS = site
INSTALLPRIVLIB = /afs/.pdx.intel.com/itools/sun4x_55/96r2/lib/perl5
INSTALLARCHLIB = /afs/.pdx.intel.com/itools/sun4x_55/96r2/lib/perl5/sun4x_55/5.003
INSTALLSITELIB = /afs/.pdx.intel.com/itools/sun4x_55/96r2/lib/perl5/site_perl
INSTALLSITEARCH = /afs/.pdx.intel.com/itools/sun4x_55/96r2/lib/perl5/site_perl/sun4x_55
INSTALLBIN = /afs/.pdx.intel.com/itools/sun4x_55/96r2/bin
INSTALLSCRIPT = /afs/.pdx.intel.com/itools/sun4x_55/96r2/bin
PERL_LIB = /usr/intel/96r2/lib/perl5
PERL_ARCHLIB = /usr/intel/96r2/lib/perl5/sun4x_55/5.003
SITELIBEXP = /usr/intel/96r2/lib/perl5/site_perl
SITEARCHEXP = /usr/intel/96r2/lib/perl5/site_perl/sun4x_55
LIBPERL_A = libperl.a
FIRST_MAKEFILE = Makefile
MAKE_APERL_FILE = Makefile.aperl
PERLMAINCC = $(CC)
PERL_INC = /usr/intel/96r2/lib/perl5/sun4x_55/5.003/CORE
PERL = /usr/intel/bin/perl
FULLPERL = /usr/intel/bin/perl
VERSION_MACRO = VERSION
DEFINE_VERSION = -D$(VERSION_MACRO)=\"$(VERSION)\"
XS_VERSION_MACRO = XS_VERSION
XS_DEFINE_VERSION = -D$(XS_VERSION_MACRO)=\"$(XS_VERSION)\"
MAKEMAKER = /usr/intel/96r2/lib/perl5/ExtUtils/MakeMaker.pm
MM_VERSION = 5.34
# FULLEXT = Pathname for extension directory (eg Foo/Bar/Oracle).
# BASEEXT = Basename part of FULLEXT. May be just equal FULLEXT. (eg Oracle)
# ROOTEXT = Directory part of FULLEXT with leading slash (eg /DBD) !!! Deprecated from MM 5.32 !!!
# PARENT_NAME = NAME without BASEEXT and no trailing :: (eg Foo::Bar)
# DLBASE = Basename part of dynamic library. May be just equal BASEEXT.
FULLEXT = Pg
BASEEXT = Pg
DLBASE = $(BASEEXT)
VERSION_FROM = Pg.pm
INC = -I/intel/tua40/eng/sort_class/user_dir/jhmerhau/db/bin/pgsql/bin/include
OBJECT = Pg$(OBJ_EXT)
LDFROM = $(OBJECT)
LINKTYPE = dynamic
# Handy lists of source code files:
XS_FILES= Pg.xs
C_FILES = Pg.c
O_FILES = Pg.o
H_FILES =
MAN1PODS =
MAN3PODS = Pg.pm
INST_MAN1DIR = ./blib/man1
INSTALLMAN1DIR = /afs/.pdx.intel.com/itools/sun4x_55/96r2/man/man1
MAN1EXT = 1
INST_MAN3DIR = ./blib/man3
INSTALLMAN3DIR = /afs/.pdx.intel.com/itools/sun4x_55/96r2/lib/perl5/man/man3
MAN3EXT = 3
# work around a famous dec-osf make(1) feature(?):
makemakerdflt: all
.SUFFIXES: .xs .c .C .cpp .cxx .cc $(OBJ_EXT)
# Nick wanted to get rid of .PRECIOUS. I don't remember why. I seem to recall, that
# some make implementations will delete the Makefile when we rebuild it. Because
# we call false(1) when we rebuild it. So make(1) is not completely wrong when it
# does so. Our milage may vary.
# .PRECIOUS: Makefile # seems to be not necessary anymore
.PHONY: all config static dynamic test linkext manifest
# Where is the Config information that we are using/depend on
CONFIGDEP = $(PERL_ARCHLIB)/Config.pm $(PERL_INC)/config.h
# Where to put things:
INST_LIBDIR = $(INST_LIB)
INST_ARCHLIBDIR = $(INST_ARCHLIB)
INST_AUTODIR = $(INST_LIB)/auto/$(FULLEXT)
INST_ARCHAUTODIR = $(INST_ARCHLIB)/auto/$(FULLEXT)
INST_STATIC = $(INST_ARCHAUTODIR)/$(BASEEXT)$(LIB_EXT)
INST_DYNAMIC = $(INST_ARCHAUTODIR)/$(DLBASE).$(DLEXT)
INST_BOOT = $(INST_ARCHAUTODIR)/$(BASEEXT).bs
EXPORT_LIST =
PERL_ARCHIVE =
TO_INST_PM = Pg.pm
PM_TO_BLIB = Pg.pm \
$(INST_LIBDIR)/Pg.pm
# --- MakeMaker tool_autosplit section:
# Usage: $(AUTOSPLITFILE) FileToSplit AutoDirToSplitInto
AUTOSPLITFILE = $(PERL) "-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" -e 'use AutoSplit;autosplit($$ARGV[0], $$ARGV[1], 0, 1, 1) ;'
# --- MakeMaker tool_xsubpp section:
XSUBPPDIR = /usr/intel/96r2/lib/perl5/ExtUtils
XSUBPP = $(XSUBPPDIR)/xsubpp
XSPROTOARG =
XSUBPPDEPS = $(XSUBPPDIR)/typemap typemap
XSUBPPARGS = -typemap $(XSUBPPDIR)/typemap -typemap typemap
# --- MakeMaker tools_other section:
SHELL = /bin/sh
CHMOD = chmod
CP = cp
LD = /usr/intel/bin/gcc
MV = mv
NOOP = sh -c true
RM_F = rm -f
RM_RF = rm -rf
TOUCH = touch
UMASK_NULL = umask 0
# The following is a portable way to say mkdir -p
# To see which directories are created, change the if 0 to if 1
MKPATH = $(PERL) -wle '$$"="/"; foreach $$p (@ARGV){' \
-e 'next if -d $$p; my(@p); foreach(split(/\//,$$p)){' \
-e 'push(@p,$$_); next if -d "@p/"; print "mkdir @p" if 0;' \
-e 'mkdir("@p",0777)||die $$! } } exit 0;'
# This helps us to minimize the effect of the .exists files A yet
# better solution would be to have a stable file in the perl
# distribution with a timestamp of zero. But this solution doesn't
# need any changes to the core distribution and works with older perls
EQUALIZE_TIMESTAMP = $(PERL) -we 'open F, ">$$ARGV[1]"; close F;' \
-e 'utime ((stat("$$ARGV[0]"))[8,9], $$ARGV[1])'
# Here we warn users that an old packlist file was found somewhere,
# and that they should call some uninstall routine
WARN_IF_OLD_PACKLIST = $(PERL) -we 'exit unless -f $$ARGV[0];' \
-e 'print "WARNING: I have found an old package in\n";' \
-e 'print "\t$$ARGV[0].\n";' \
-e 'print "Please make sure the two installations are not conflicting\n";'
UNINST=0
VERBINST=1
MOD_INSTALL = $(PERL) -I$(INST_LIB) -I$(PERL_LIB) -MExtUtils::Install \
-e 'install({@ARGV},"$(VERBINST)",0,"$(UNINST)");'
DOC_INSTALL = $(PERL) -e '$$\="\n\n";print "=head3 ", scalar(localtime), ": C<", shift, ">";' \
-e 'print "=over 4";' \
-e 'while (defined($$key = shift) and defined($$val = shift)){print "=item *";print "C<$$key: $$val>";}' \
-e 'print "=back";'
UNINSTALL = $(PERL) -MExtUtils::Install \
-e 'uninstall($$ARGV[0],1);'
# --- MakeMaker dist section:
DISTVNAME = $(DISTNAME)-$(VERSION)
TAR = tar
TARFLAGS = cvf
ZIP = zip
ZIPFLAGS = -r
COMPRESS = compress
SUFFIX = .Z
SHAR = shar
PREOP = @$(NOOP)
POSTOP = @$(NOOP)
TO_UNIX = @$(NOOP)
CI = ci -u
RCS_LABEL = rcs -Nv$(VERSION_SYM): -q
DIST_CP = best
DIST_DEFAULT = tardist
# --- MakeMaker macro section:
# --- MakeMaker depend section:
# --- MakeMaker cflags section:
CCFLAGS = -I/usr/intel/96r2/include \
-I/intel/tua40/eng/sort_class/user_dir/jhmerhau/db/src/postgresql-7.0.3/src/interfaces/libpq \
-I/intel/tua40/eng/sort_class/user_dir/jhmerhau/db/src/postgresql-7.0.3/src/include
OPTIMIZE = -O
PERLTYPE =
LARGE =
SPLIT =
# --- MakeMaker const_loadlibs section:
# Pg might depend on some other libraries:
# See ExtUtils::Liblist for details
#
LD_RUN_PATH =
# --- MakeMaker const_cccmd section:
CCCMD = $(CC) -c $(INC) $(CCFLAGS) $(OPTIMIZE) \
$(PERLTYPE) $(LARGE) $(SPLIT) $(DEFINE_VERSION) \
$(XS_DEFINE_VERSION)
# --- MakeMaker post_constants section:
# --- MakeMaker pasthru section:
PASTHRU = LIBPERL_A="$(LIBPERL_A)"\
LINKTYPE="$(LINKTYPE)"\
PREFIX="$(PREFIX)"\
OPTIMIZE="$(OPTIMIZE)"
# --- MakeMaker c_o section:
.c$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.c
.C$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.C
.cpp$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.cpp
.cxx$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.cxx
.cc$(OBJ_EXT):
$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.cc
# --- MakeMaker xs_c section:
.xs.c:
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) $(XSUBPP) $(XSPROTOARG) $(XSUBPPARGS) $*.xs >$*.tc && mv $*.tc $@
# --- MakeMaker xs_o section:
.xs$(OBJ_EXT):
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) $(XSUBPP) $(XSPROTOARG) $(XSUBPPARGS) $*.xs >xstmp.c && mv xstmp.c $*.c
$(CCCMD) $(CCCDLFLAGS) -I$(PERL_INC) $(DEFINE) $*.c
# --- MakeMaker top_targets section:
#all :: config $(INST_PM) subdirs linkext manifypods
all :: pure_all manifypods
@$(NOOP)
pure_all :: config pm_to_blib subdirs linkext
@$(NOOP)
subdirs :: $(MYEXTLIB)
@$(NOOP)
config :: Makefile $(INST_LIBDIR)/.exists
@$(NOOP)
config :: $(INST_ARCHAUTODIR)/.exists
@$(NOOP)
config :: $(INST_AUTODIR)/.exists
@$(NOOP)
config :: Version_check
@$(NOOP)
$(INST_AUTODIR)/.exists :: /usr/intel/96r2/lib/perl5/sun4x_55/5.003/CORE/perl.h
@$(MKPATH) $(INST_AUTODIR)
@$(EQUALIZE_TIMESTAMP) /usr/intel/96r2/lib/perl5/sun4x_55/5.003/CORE/perl.h $(INST_AUTODIR)/.exists
-@$(CHMOD) 755 $(INST_AUTODIR)
$(INST_LIBDIR)/.exists :: /usr/intel/96r2/lib/perl5/sun4x_55/5.003/CORE/perl.h
@$(MKPATH) $(INST_LIBDIR)
@$(EQUALIZE_TIMESTAMP) /usr/intel/96r2/lib/perl5/sun4x_55/5.003/CORE/perl.h $(INST_LIBDIR)/.exists
-@$(CHMOD) 755 $(INST_LIBDIR)
$(INST_ARCHAUTODIR)/.exists :: /usr/intel/96r2/lib/perl5/sun4x_55/5.003/CORE/perl.h
@$(MKPATH) $(INST_ARCHAUTODIR)
@$(EQUALIZE_TIMESTAMP) /usr/intel/96r2/lib/perl5/sun4x_55/5.003/CORE/perl.h $(INST_ARCHAUTODIR)/.exists
-@$(CHMOD) 755 $(INST_ARCHAUTODIR)
config :: $(INST_MAN3DIR)/.exists
@$(NOOP)
$(INST_MAN3DIR)/.exists :: /usr/intel/96r2/lib/perl5/sun4x_55/5.003/CORE/perl.h
@$(MKPATH) $(INST_MAN3DIR)
@$(EQUALIZE_TIMESTAMP) /usr/intel/96r2/lib/perl5/sun4x_55/5.003/CORE/perl.h $(INST_MAN3DIR)/.exists
-@$(CHMOD) 755 $(INST_MAN3DIR)
help:
perldoc ExtUtils::MakeMaker
Version_check:
@$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) \
-MExtUtils::MakeMaker=Version_check \
-e 'Version_check("$(MM_VERSION)")'
# --- MakeMaker linkext section:
linkext :: $(LINKTYPE)
@$(NOOP)
# --- MakeMaker dlsyms section:
# --- MakeMaker dynamic section:
## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make dynamic"
#dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT) $(INST_PM)
dynamic :: Makefile $(INST_DYNAMIC) $(INST_BOOT)
@$(NOOP)
# --- MakeMaker dynamic_bs section:
BOOTSTRAP = Pg.bs
# As Mkbootstrap might not write a file (if none is required)
# we use touch to prevent make continually trying to remake it.
# The DynaLoader only reads a non-empty file.
$(BOOTSTRAP): Makefile $(INST_ARCHAUTODIR)/.exists
@echo "Running Mkbootstrap for $(NAME) ($(BSLOADLIBS))"
@$(PERL) "-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" \
-e 'use ExtUtils::Mkbootstrap;' \
-e 'Mkbootstrap("$(BASEEXT)","$(BSLOADLIBS)");'
@$(TOUCH) $(BOOTSTRAP)
$(CHMOD) 644 $@
$(INST_BOOT): $(BOOTSTRAP) $(INST_ARCHAUTODIR)/.exists
@rm -rf $(INST_BOOT)
-cp $(BOOTSTRAP) $(INST_BOOT)
$(CHMOD) 644 $@
# --- MakeMaker dynamic_lib section:
# This section creates the dynamically loadable $(INST_DYNAMIC)
# from $(OBJECT) and possibly $(MYEXTLIB).
ARMAYBE = :
OTHERLDFLAGS =
INST_DYNAMIC_DEP =
$(INST_DYNAMIC): $(OBJECT) $(MYEXTLIB) $(BOOTSTRAP) $(INST_ARCHAUTODIR)/.exists $(EXPORT_LIST) $(PERL_ARCHIVE) $(INST_DYNAMIC_DEP)
LD_RUN_PATH="$(LD_RUN_PATH)" $(LD) -o $@ $(LDDLFLAGS) $(LDFROM) $(OTHERLDFLAGS) $(MYEXTLIB) $(PERL_ARCHIVE) $(LDLOADLIBS) $(EXPORT_LIST)
$(CHMOD) 755 $@
# --- MakeMaker static section:
## $(INST_PM) has been moved to the all: target.
## It remains here for awhile to allow for old usage: "make static"
#static :: Makefile $(INST_STATIC) $(INST_PM)
static :: Makefile $(INST_STATIC)
@$(NOOP)
# --- MakeMaker static_lib section:
$(INST_STATIC): $(OBJECT) $(MYEXTLIB) $(INST_ARCHAUTODIR)/.exists
$(RM_RF) $@
$(AR) $(AR_STATIC_ARGS) $@ $(OBJECT) && $(RANLIB) $@
@echo "$(EXTRALIBS)" > $(INST_ARCHAUTODIR)/extralibs.ld
$(CHMOD) 755 $@
# --- MakeMaker manifypods section:
POD2MAN_EXE = /usr/intel/96r2/bin/pod2man
POD2MAN = $(PERL) -we '%m=@ARGV;for (keys %m){' \
-e 'next if -e $$m{$$_} && -M $$m{$$_} < -M $$_ && -M $$m{$$_} < -M "Makefile";' \
-e 'print "Manifying $$m{$$_}\n";' \
-e 'system(qq[$$^X ].q["-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" $(POD2MAN_EXE) ].qq[$$_>$$m{$$_}])==0 or warn "Couldn\047t install $$m{$$_}\n";' \
-e 'chmod 0644, $$m{$$_} or warn "chmod 644 $$m{$$_}: $$!\n";}'
manifypods : Pg.pm
@$(POD2MAN) \
Pg.pm \
$(INST_MAN3DIR)/Pg.$(MAN3EXT)
# --- MakeMaker processPL section:
# --- MakeMaker installbin section:
# Create a target that interfaces/Makefile can use to
# determine the Perl install directory.
echo-installdir:
@echo $(INSTALLSITELIB)
# --- MakeMaker subdirs section:
# none
# --- MakeMaker clean section:
# Delete temporary files but do not touch installed files. We don't delete
# the Makefile here so a later make realclean still has a makefile to use.
clean ::
-rm -rf Pg.c ./blib $(MAKE_APERL_FILE) $(INST_ARCHAUTODIR)/extralibs.all perlmain.c mon.out core so_locations pm_to_blib *~ */*~ */*/*~ *$(OBJ_EXT) *$(LIB_EXT) perl.exe $(BOOTSTRAP) $(BASEEXT).bso $(BASEEXT).def $(BASEEXT).exp
-mv Makefile Makefile.old 2>/dev/null
# --- MakeMaker realclean section:
# Delete temporary files (via clean) and also delete installed files
realclean purge :: clean
rm -rf $(INST_AUTODIR) $(INST_ARCHAUTODIR)
rm -f $(INST_DYNAMIC) $(INST_BOOT)
rm -f $(INST_STATIC)
rm -f $(INST_LIBDIR)/Pg.pm
rm -rf Makefile Makefile.old
# --- MakeMaker dist_basics section:
distclean :: realclean distcheck
distcheck :
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -e 'use ExtUtils::Manifest "&fullcheck";' \
-e 'fullcheck();'
skipcheck :
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -e 'use ExtUtils::Manifest "&skipcheck";' \
-e 'skipcheck();'
manifest :
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -e 'use ExtUtils::Manifest "&mkmanifest";' \
-e 'mkmanifest();'
# --- MakeMaker dist_core section:
dist : $(DIST_DEFAULT)
@$(PERL) -le 'print "Warning: Makefile possibly out of date with $$vf" if ' \
-e '-e ($$vf="$(VERSION_FROM)") and -M $$vf < -M "Makefile";'
tardist : $(DISTVNAME).tar$(SUFFIX)
zipdist : $(DISTVNAME).zip
$(DISTVNAME).tar$(SUFFIX) : distdir
$(PREOP)
$(TO_UNIX)
$(TAR) $(TARFLAGS) $(DISTVNAME).tar $(DISTVNAME)
$(RM_RF) $(DISTVNAME)
$(COMPRESS) $(DISTVNAME).tar
$(POSTOP)
$(DISTVNAME).zip : distdir
$(PREOP)
$(ZIP) $(ZIPFLAGS) $(DISTVNAME).zip $(DISTVNAME)
$(RM_RF) $(DISTVNAME)
$(POSTOP)
uutardist : $(DISTVNAME).tar$(SUFFIX)
uuencode $(DISTVNAME).tar$(SUFFIX) \
$(DISTVNAME).tar$(SUFFIX) > \
$(DISTVNAME).tar$(SUFFIX)_uu
shdist : distdir
$(PREOP)
$(SHAR) $(DISTVNAME) > $(DISTVNAME).shar
$(RM_RF) $(DISTVNAME)
$(POSTOP)
# --- MakeMaker dist_dir section:
distdir :
$(RM_RF) $(DISTVNAME)
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -MExtUtils::Manifest=manicopy,maniread \
-e 'manicopy(maniread(),"$(DISTVNAME)", "$(DIST_CP)");'
# --- MakeMaker dist_test section:
disttest : distdir
cd $(DISTVNAME) && $(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) Makefile.PL
cd $(DISTVNAME) && $(MAKE)
cd $(DISTVNAME) && $(MAKE) test
# --- MakeMaker dist_ci section:
ci :
$(PERL) -I$(PERL_ARCHLIB) -I$(PERL_LIB) -e 'use ExtUtils::Manifest "&maniread";' \
-e '@all = keys %{ maniread() };' \
-e 'print("Executing $(CI) @all\n"); system("$(CI) @all");' \
-e 'print("Executing $(RCS_LABEL) ...\n"); system("$(RCS_LABEL) @all");'
# --- MakeMaker install section:
install :: all pure_install doc_install
install_perl :: all pure_perl_install doc_perl_install
install_site :: all pure_site_install doc_site_install
install_ :: install_site
@echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
pure_install :: pure_$(INSTALLDIRS)_install
doc_install :: doc_$(INSTALLDIRS)_install
@echo Appending installation info to $(INSTALLARCHLIB)/perllocal.pod
pure__install : pure_site_install
@echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
doc__install : doc_site_install
@echo INSTALLDIRS not defined, defaulting to INSTALLDIRS=site
pure_perl_install ::
@$(MOD_INSTALL) \
read $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist \
write $(INSTALLARCHLIB)/auto/$(FULLEXT)/.packlist \
$(INST_LIB) $(INSTALLPRIVLIB) \
$(INST_ARCHLIB) $(INSTALLARCHLIB) \
$(INST_BIN) $(INSTALLBIN) \
$(INST_SCRIPT) $(INSTALLSCRIPT) \
$(INST_MAN1DIR) $(INSTALLMAN1DIR) \
$(INST_MAN3DIR) $(INSTALLMAN3DIR)
@$(WARN_IF_OLD_PACKLIST) \
$(SITEARCHEXP)/auto/$(FULLEXT)
pure_site_install ::
@$(MOD_INSTALL) \
read $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist \
write $(INSTALLSITEARCH)/auto/$(FULLEXT)/.packlist \
$(INST_LIB) $(INSTALLSITELIB) \
$(INST_ARCHLIB) $(INSTALLSITEARCH) \
$(INST_BIN) $(INSTALLBIN) \
$(INST_SCRIPT) $(INSTALLSCRIPT) \
$(INST_MAN1DIR) $(INSTALLMAN1DIR) \
$(INST_MAN3DIR) $(INSTALLMAN3DIR)
@$(WARN_IF_OLD_PACKLIST) \
$(PERL_ARCHLIB)/auto/$(FULLEXT)
doc_perl_install ::
@$(DOC_INSTALL) \
"$(NAME)" \
"installed into" "$(INSTALLPRIVLIB)" \
LINKTYPE "$(LINKTYPE)" \
VERSION "$(VERSION)" \
EXE_FILES "$(EXE_FILES)" \
>> $(INSTALLARCHLIB)/perllocal.pod
doc_site_install ::
@$(DOC_INSTALL) \
"Module $(NAME)" \
"installed into" "$(INSTALLSITELIB)" \
LINKTYPE "$(LINKTYPE)" \
VERSION "$(VERSION)" \
EXE_FILES "$(EXE_FILES)" \
>> $(INSTALLARCHLIB)/perllocal.pod
uninstall :: uninstall_from_$(INSTALLDIRS)dirs
uninstall_from_perldirs ::
@$(UNINSTALL) $(PERL_ARCHLIB)/auto/$(FULLEXT)/.packlist
uninstall_from_sitedirs ::
@$(UNINSTALL) $(SITEARCHEXP)/auto/$(FULLEXT)/.packlist
# --- MakeMaker force section:
# Phony target to force checking subdirectories.
FORCE:
# --- MakeMaker perldepend section:
PERL_HDRS = \
$(PERL_INC)/EXTERN.h $(PERL_INC)/gv.h $(PERL_INC)/pp.h \
$(PERL_INC)/INTERN.h $(PERL_INC)/handy.h $(PERL_INC)/proto.h \
$(PERL_INC)/XSUB.h $(PERL_INC)/hv.h $(PERL_INC)/regcomp.h \
$(PERL_INC)/av.h $(PERL_INC)/keywords.h $(PERL_INC)/regexp.h \
$(PERL_INC)/config.h $(PERL_INC)/mg.h $(PERL_INC)/scope.h \
$(PERL_INC)/cop.h $(PERL_INC)/op.h $(PERL_INC)/sv.h \
$(PERL_INC)/cv.h $(PERL_INC)/opcode.h $(PERL_INC)/unixish.h \
$(PERL_INC)/dosish.h $(PERL_INC)/patchlevel.h $(PERL_INC)/util.h \
$(PERL_INC)/embed.h $(PERL_INC)/perl.h \
$(PERL_INC)/form.h $(PERL_INC)/perly.h
$(OBJECT) : $(PERL_HDRS)
Pg.c : $(XSUBPPDEPS)
# --- MakeMaker makefile section:
$(OBJECT) : $(FIRST_MAKEFILE)
# We take a very conservative approach here, but it\'s worth it.
# We move Makefile to Makefile.old here to avoid gnu make looping.
Makefile : Makefile.PL $(CONFIGDEP)
@echo "Makefile out-of-date with respect to $?"
@echo "Cleaning current config before rebuilding Makefile..."
-@mv Makefile Makefile.old
-$(MAKE) -f Makefile.old clean >/dev/null 2>&1 || true
$(PERL) "-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" Makefile.PL
@echo ">>> Your Makefile has been rebuilt. <<<"
@echo ">>> Please rerun the make command. <<<"; false
# To change behavior to :: would be nice, but would break Tk b9.02
# so you find such a warning below the dist target.
#Makefile :: $(VERSION_FROM)
# @echo "Warning: Makefile possibly out of date with $(VERSION_FROM)"
# --- MakeMaker staticmake section:
# --- MakeMaker makeaperl section ---
MAP_TARGET = perl
FULLPERL = /usr/intel/bin/perl
$(MAP_TARGET) :: static $(MAKE_APERL_FILE)
$(MAKE) -f $(MAKE_APERL_FILE) $@
$(MAKE_APERL_FILE) : $(FIRST_MAKEFILE)
@echo Writing \"$(MAKE_APERL_FILE)\" for this $(MAP_TARGET)
@$(PERL) -I$(INST_ARCHLIB) -I$(INST_LIB) -I$(PERL_ARCHLIB) -I$(PERL_LIB) \
Makefile.PL DIR= \
MAKEFILE=$(MAKE_APERL_FILE) LINKTYPE=static \
MAKEAPERL=1 NORECURS=1 CCCDLFLAGS=
# --- MakeMaker test section:
TEST_VERBOSE=0
TEST_TYPE=test_$(LINKTYPE)
TEST_FILE = test.pl
TESTDB_SW = -d
testdb :: testdb_$(LINKTYPE)
test :: $(TEST_TYPE)
test_dynamic :: pure_all
PERL_DL_NONLAZY=1 $(FULLPERL) -I$(INST_ARCHLIB) -I$(INST_LIB) -I$(PERL_ARCHLIB) -I$(PERL_LIB) test.pl
testdb_dynamic :: pure_all
PERL_DL_NONLAZY=1 $(FULLPERL) $(TESTDB_SW) -I$(INST_ARCHLIB) -I$(INST_LIB) -I$(PERL_ARCHLIB) -I$(PERL_LIB) $(TEST_FILE)
test_ : test_dynamic
test_static :: pure_all $(MAP_TARGET)
PERL_DL_NONLAZY=1 ./$(MAP_TARGET) -I$(INST_ARCHLIB) -I$(INST_LIB) -I$(PERL_ARCHLIB) -I$(PERL_LIB) test.pl
testdb_static :: pure_all $(MAP_TARGET)
PERL_DL_NONLAZY=1 ./$(MAP_TARGET) $(TESTDB_SW) -I$(INST_ARCHLIB) -I$(INST_LIB) -I$(PERL_ARCHLIB) -I$(PERL_LIB) $(TEST_FILE)
# --- MakeMaker pm_to_blib section:
pm_to_blib: $(TO_INST_PM)
@$(PERL) "-I$(INST_ARCHLIB)" "-I$(INST_LIB)" \
"-I$(PERL_ARCHLIB)" "-I$(PERL_LIB)" -MExtUtils::Install \
-e 'pm_to_blib({qw{$(PM_TO_BLIB)}},"$(INST_LIB)/auto")'
@$(TOUCH) $@
# --- MakeMaker selfdocument section:
# --- MakeMaker postamble section:
# End.
* Re: PERL5 interface for POSTGRESQL
@ 2000-12-30 03:57 Tom Lane <tgl@sss.pgh.pa.us>
parent: James Merhaut <jhmerhau@dt1s78.ra.intel.com>
0 siblings, 0 replies; 2+ messages in thread
From: Tom Lane @ 2000-12-30 03:57 UTC (permalink / raw)
To: James Merhaut <jhmerhau@dt1s78.ra.intel.com>; +Cc: pgsql-interfaces
James Merhaut <jhmerhau@dt1s78.ra.intel.com> writes:
> > make test
> PERL_DL_NONLAZY=1 /usr/intel/bin/perl -I./blib/arch -I./blib/lib
> -I/usr/intel/96r2/lib/perl5/sun4x_55/5.003 -I/usr/intel/96r2/lib/perl5 test.pl
> Can't load './blib/arch/auto/Pg/Pg.so' for module Pg: ld.so.1: /usr/intel/bin/perl:
> fatal: relocation error: file ./blib/arch/auto/Pg/Pg.so: symbol lo_export: referenced
> symbol not found at /usr/intel/96r2/lib/perl5/DynaLoader.pm line 140.
Hm. Most likely, the dynamic loader isn't finding libpq.so at all.
Check your LD_LIBRARY_PATH or local equivalent.
regards, tom lane
^ permalink raw reply [nested|flat] 2+ messages in thread
end of thread, other threads:[~2000-12-30 03:57 UTC | newest]
Thread overview: 2+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2000-12-27 18:28 PERL5 interface for POSTGRESQL James Merhaut <jhmerhau@dt1s78.ra.intel.com>
2000-12-30 03:57 ` Tom Lane <tgl@sss.pgh.pa.us>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox