pg.ddx.io pgsql-performance@postgresql.org mailing list archive
help / color / mirror / Atom feedLarge time difference between explain analyze and normal run
5+ messages / 3 participants
[nested] [flat]
* Large time difference between explain analyze and normal run
@ 2005-02-10 18:34 Chris Kratz <chris.kratz@vistashare.com>
0 siblings, 1 reply; 5+ messages in thread
From: Chris Kratz @ 2005-02-10 18:34 UTC (permalink / raw)
To: pgsql-performance
Does anyone have any idea why there be over a 4s difference between running
the statement directly and using explain analyze? Multiple runs give the
same result and I've tested on several servers.
db=# \timing
Timing is on.
db=# select count(*) from answer;
count
--------
530576
(1 row)
Time: 358.805 ms
db=# explain analyze select count(*) from answer;
QUERY PLAN
----------------------------------------------------------------------------------------------------------------------
Aggregate (cost=9848.12..9848.12 rows=1 width=0) (actual
time=4841.231..4841.235 rows=1 loops=1)
-> Seq Scan on answer (cost=0.00..8561.29 rows=514729 width=0) (actual
time=0.011..2347.762 rows=530576 loops=1)
Total runtime: 4841.412 ms
(3 rows)
Time: 4855.712 ms
---
Postgresql 7.4.5 running on Linux 2.6.8.1
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Large time difference between explain analyze and normal run
@ 2005-02-10 18:58 Tom Lane <tgl@sss.pgh.pa.us>
parent: Chris Kratz <chris.kratz@vistashare.com>
0 siblings, 2 replies; 5+ messages in thread
From: Tom Lane @ 2005-02-10 18:58 UTC (permalink / raw)
To: Chris Kratz <chris.kratz@vistashare.com>; +Cc: pgsql-performance
Chris Kratz <chris.kratz@vistashare.com> writes:
> Does anyone have any idea why there be over a 4s difference between running
> the statement directly and using explain analyze?
> Aggregate (cost=9848.12..9848.12 rows=1 width=0) (actual
> time=4841.231..4841.235 rows=1 loops=1)
> -> Seq Scan on answer (cost=0.00..8561.29 rows=514729 width=0) (actual
> time=0.011..2347.762 rows=530576 loops=1)
> Total runtime: 4841.412 ms
EXPLAIN ANALYZE's principal overhead is two gettimeofday() kernel calls
per plan node execution, so 1061154 such calls here. I infer that
gettimeofday takes about 4 microseconds on your hardware ... which seems
a bit slow for modern machines. What sort of box is it?
regards, tom lane
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Large time difference between explain analyze and normal run
@ 2005-02-10 19:05 Chris Kratz <chris.kratz@vistashare.com>
parent: Tom Lane <tgl@sss.pgh.pa.us>
1 sibling, 0 replies; 5+ messages in thread
From: Chris Kratz @ 2005-02-10 19:05 UTC (permalink / raw)
To: pgsql-performance
On Thursday 10 February 2005 01:58 pm, Tom Lane wrote:
> Chris Kratz <chris.kratz@vistashare.com> writes:
> > Does anyone have any idea why there be over a 4s difference between
> > running the statement directly and using explain analyze?
> >
> > Aggregate (cost=9848.12..9848.12 rows=1 width=0) (actual
> > time=4841.231..4841.235 rows=1 loops=1)
> > -> Seq Scan on answer (cost=0.00..8561.29 rows=514729 width=0)
> > (actual time=0.011..2347.762 rows=530576 loops=1)
> > Total runtime: 4841.412 ms
>
> EXPLAIN ANALYZE's principal overhead is two gettimeofday() kernel calls
> per plan node execution, so 1061154 such calls here. I infer that
> gettimeofday takes about 4 microseconds on your hardware ... which seems
> a bit slow for modern machines. What sort of box is it?
>
> regards, tom lane
OK, that makes sense.
Athlon XP 3000+
1.5G Mem
Is there a way to test the gettimeofday() directly?
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Large time difference between explain analyze and normal run
@ 2005-02-10 20:09 Darcy Buskermolen <darcy@wavefire.com>
parent: Tom Lane <tgl@sss.pgh.pa.us>
1 sibling, 1 reply; 5+ messages in thread
From: Darcy Buskermolen @ 2005-02-10 20:09 UTC (permalink / raw)
To: Tom Lane <tgl@sss.pgh.pa.us>; +Cc: Chris Kratz <chris.kratz@vistashare.com>; pgsql-performance
On February 10, 2005 10:58 am, Tom Lane wrote:
> Chris Kratz <chris.kratz@vistashare.com> writes:
> > Does anyone have any idea why there be over a 4s difference between
> > running the statement directly and using explain analyze?
> >
> > Aggregate (cost=9848.12..9848.12 rows=1 width=0) (actual
> > time=4841.231..4841.235 rows=1 loops=1)
> > -> Seq Scan on answer (cost=0.00..8561.29 rows=514729 width=0)
> > (actual time=0.011..2347.762 rows=530576 loops=1)
> > Total runtime: 4841.412 ms
>
> EXPLAIN ANALYZE's principal overhead is two gettimeofday() kernel calls
> per plan node execution, so 1061154 such calls here. I infer that
> gettimeofday takes about 4 microseconds on your hardware ... which seems
> a bit slow for modern machines. What sort of box is it?
dvl reported the same thing on #postgresql some months back, and neilc
was/is/did looking into it. I belive he came up with a way to move the
function call outside of the loop with no ill effects to the rest of the
expected behavior.
>
> regards, tom lane
>
> ---------------------------(end of broadcast)---------------------------
> TIP 4: Don't 'kill -9' the postmaster
--
Darcy Buskermolen
Wavefire Technologies Corp.
ph: 250.717.0200
fx: 250.763.1759
http://www.wavefire.com
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Large time difference between explain analyze and normal run
@ 2005-02-10 20:25 Chris Kratz <chris.kratz@vistashare.com>
parent: Darcy Buskermolen <darcy@wavefire.com>
0 siblings, 0 replies; 5+ messages in thread
From: Chris Kratz @ 2005-02-10 20:25 UTC (permalink / raw)
To: Darcy Buskermolen <darcy@wavefire.com>; +Cc: Tom Lane <tgl@sss.pgh.pa.us>; pgsql-performance
On Thursday 10 February 2005 03:09 pm, Darcy Buskermolen wrote:
> On February 10, 2005 10:58 am, Tom Lane wrote:
> > Chris Kratz <chris.kratz@vistashare.com> writes:
> > > Does anyone have any idea why there be over a 4s difference between
> > > running the statement directly and using explain analyze?
> > >
> > > Aggregate (cost=9848.12..9848.12 rows=1 width=0) (actual
> > > time=4841.231..4841.235 rows=1 loops=1)
> > > -> Seq Scan on answer (cost=0.00..8561.29 rows=514729 width=0)
> > > (actual time=0.011..2347.762 rows=530576 loops=1)
> > > Total runtime: 4841.412 ms
> >
> > EXPLAIN ANALYZE's principal overhead is two gettimeofday() kernel calls
> > per plan node execution, so 1061154 such calls here. I infer that
> > gettimeofday takes about 4 microseconds on your hardware ... which seems
> > a bit slow for modern machines. What sort of box is it?
>
> dvl reported the same thing on #postgresql some months back, and neilc
> was/is/did looking into it. I belive he came up with a way to move the
> function call outside of the loop with no ill effects to the rest of the
> expected behavior.
That's interesting to know. It's not a big deal, we were just curious as to
why the difference. Tom's explanation makes good sense. We run into the
same situation with using a profiler on an application, ie measuring incurs
overhead.
-Chris
^ permalink raw reply [nested|flat] 5+ messages in thread
end of thread, other threads:[~2005-02-10 20:25 UTC | newest]
Thread overview: 5+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2005-02-10 18:34 Large time difference between explain analyze and normal run Chris Kratz <chris.kratz@vistashare.com>
2005-02-10 18:58 ` Tom Lane <tgl@sss.pgh.pa.us>
2005-02-10 19:05 ` Chris Kratz <chris.kratz@vistashare.com>
2005-02-10 20:09 ` Darcy Buskermolen <darcy@wavefire.com>
2005-02-10 20:25 ` Chris Kratz <chris.kratz@vistashare.com>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox