pg.ddx.io pgsql-performance@postgresql.org mailing list archive
help / color / mirror / Atom feedPostgreSQL as a local in-memory cache
73+ messages / 26 participants
[nested] [flat]
* PostgreSQL as a local in-memory cache
@ 2010-06-15 02:14 jgardner@jonathangardner.net <jgardner@jonathangardner.net>
0 siblings, 3 replies; 73+ messages in thread
From: jgardner@jonathangardner.net @ 2010-06-15 02:14 UTC (permalink / raw)
To: pgsql-performance
We have a fairly unique need for a local, in-memory cache. This will
store data aggregated from other sources. Generating the data only
takes a few minutes, and it is updated often. There will be some
fairly expensive queries of arbitrary complexity run at a fairly high
rate. We're looking for high concurrency and reasonable performance
throughout.
The entire data set is roughly 20 MB in size. We've tried Carbonado in
front of SleepycatJE only to discover that it chokes at a fairly low
concurrency and that Carbonado's rule-based optimizer is wholly
insufficient for our needs. We've also tried Carbonado's Map
Repository which suffers the same problems.
I've since moved the backend database to a local PostgreSQL instance
hoping to take advantage of PostgreSQL's superior performance at high
concurrency. Of course, at the default settings, it performs quite
poorly compares to the Map Repository and Sleepycat JE.
My question is how can I configure the database to run as quickly as
possible if I don't care about data consistency or durability? That
is, the data is updated so often and it can be reproduced fairly
rapidly so that if there is a server crash or random particles from
space mess up memory we'd just restart the machine and move on.
I've never configured PostgreSQL to work like this and I thought maybe
someone here had some ideas on a good approach to this.
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-15 15:47 Chris Browne <cbbrowne@acm.org>
parent: jgardner@jonathangardner.net <jgardner@jonathangardner.net>
2 siblings, 2 replies; 73+ messages in thread
From: Chris Browne @ 2010-06-15 15:47 UTC (permalink / raw)
To: pgsql-performance
"jgardner@jonathangardner.net" <jgardner@jonathangardner.net> writes:
> My question is how can I configure the database to run as quickly as
> possible if I don't care about data consistency or durability? That
> is, the data is updated so often and it can be reproduced fairly
> rapidly so that if there is a server crash or random particles from
> space mess up memory we'd just restart the machine and move on.
For such a scenario, I'd suggest you:
- Set up a filesystem that is memory-backed. On Linux, RamFS or TmpFS
are reasonable options for this.
- The complication would be that your "restart the machine and move
on" needs to consist of quite a few steps:
- recreating the filesystem
- fixing permissions as needed
- running initdb to set up new PG instance
- automating any needful fiddling with postgresql.conf, pg_hba.conf
- starting up that PG instance
- creating users, databases, schemas, ...
When my desktop machine's not dead [as it is now :-(], I frequently
use this very kind of configuration to host databases where I'm doing
functionality testing on continually-freshly-created DBs and therefore
don't actually care if they get thrown away.
I have set up an "init.d"-style script which has an extra target to do
the database "init" in order to make the last few steps mentioned as
quick as possible.
~/dbs/pgsql-head.sh init
goes an extra mile, using sed to rewrite postgresql.conf to change
defaults.
I expect that, if running on a ramdisk, you'd want to fiddle some of
the disk performance parameters in postgresql.conf.
It's certainly worth trying out the ramdisk to see if it helps with
this case. Note that all you'll lose is durability under conditions
of hardware outage - PostgreSQL will still care as much as always
about data consistency.
[Thinking about wilder possibilities...]
I wonder if this kind of installation "comes into its own" for more
realistic scenarios in the presence of streaming replication. If you
know the WAL files have gotten to disk on another server, that's a
pretty good guarantee :-).
--
select 'cbbrowne' || '@' || 'cbbrowne.com';
http://cbbrowne.com/info/internet.html
"MS apparently now has a team dedicated to tracking problems with
Linux and publicizing them. I guess eventually they'll figure out
this back fires... ;)" -- William Burrow <aa126@DELETE.fan.nb.ca>
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-15 16:02 Steve Wampler <swampler@noao.edu>
parent: Chris Browne <cbbrowne@acm.org>
1 sibling, 2 replies; 73+ messages in thread
From: Steve Wampler @ 2010-06-15 16:02 UTC (permalink / raw)
To: pgsql-performance
Chris Browne wrote:
> "jgardner@jonathangardner.net" <jgardner@jonathangardner.net> writes:
>> My question is how can I configure the database to run as quickly as
>> possible if I don't care about data consistency or durability? That
>> is, the data is updated so often and it can be reproduced fairly
>> rapidly so that if there is a server crash or random particles from
>> space mess up memory we'd just restart the machine and move on.
>
> For such a scenario, I'd suggest you:
>
> - Set up a filesystem that is memory-backed. On Linux, RamFS or TmpFS
> are reasonable options for this.
>
> - The complication would be that your "restart the machine and move
> on" needs to consist of quite a few steps:
>
> - recreating the filesystem
> - fixing permissions as needed
> - running initdb to set up new PG instance
> - automating any needful fiddling with postgresql.conf, pg_hba.conf
> - starting up that PG instance
> - creating users, databases, schemas, ...
Doesn't PG now support putting both WAL and user table files onto
file systems other than the one holding the PG config files and PG
'admin' tables? Wouldn't doing so simplify the above considertably
by allowing just the WAL and user tables on the memory-backed file
systems? I wouldn't think the performance impact of leaving
the rest of the stuff on disk would be that large.
Or does losing WAL files mandate a new initdb?
--
Steve Wampler -- swampler@noao.edu
The gods that smiled on your birth are now laughing out loud.
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-15 16:49 jgardner@jonathangardner.net <jgardner@jonathangardner.net>
parent: Chris Browne <cbbrowne@acm.org>
1 sibling, 0 replies; 73+ messages in thread
From: jgardner@jonathangardner.net @ 2010-06-15 16:49 UTC (permalink / raw)
To: pgsql-performance
On Jun 15, 8:47 am, Chris Browne <cbbro...@acm.org> wrote:
> "jgard...@jonathangardner.net" <jgard...@jonathangardner.net> writes:
> > My question is how can I configure the database to run as quickly as
> > possible if I don't care about data consistency or durability? That
> > is, the data is updated so often and it can be reproduced fairly
> > rapidly so that if there is a server crash or random particles from
> > space mess up memory we'd just restart the machine and move on.
>
> For such a scenario, I'd suggest you:
>
> - Set up a filesystem that is memory-backed. On Linux, RamFS or TmpFS
> are reasonable options for this.
>
I had forgotten about this. I will try this out.
> - The complication would be that your "restart the machine and move
> on" needs to consist of quite a few steps:
>
> - recreating the filesystem
> - fixing permissions as needed
> - running initdb to set up new PG instance
> - automating any needful fiddling with postgresql.conf, pg_hba.conf
> - starting up that PG instance
> - creating users, databases, schemas, ...
>
I'm going to have a system in place to create these databases when I
restart the service.
> ...
>
> I wonder if this kind of installation "comes into its own" for more
> realistic scenarios in the presence of streaming replication. If you
> know the WAL files have gotten to disk on another server, that's a
> pretty good guarantee :-).
>
I have found that pre-computing and storing values in a general
relational-type database without durability is an ideal use case to
help improve services that need to return calculated results quickly.
A simple hash lookup is no longer sufficient. Perhaps PostgreSQL
running in this mode will be the ideal solution.
Nowadays, no one is really surprised that it takes 30 seconds or so to
replicate your data everywhere, but they do detest not getting answers
to their complicated queries immediately.
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-15 17:12 Craig James <craig_james@emolecules.com>
parent: Steve Wampler <swampler@noao.edu>
1 sibling, 0 replies; 73+ messages in thread
From: Craig James @ 2010-06-15 17:12 UTC (permalink / raw)
To: Steve Wampler <swampler@noao.edu>; pgsql-performance
[oops, didn't hit "reply to list" first time, resending...]
On 6/15/10 9:02 AM, Steve Wampler wrote:
> Chris Browne wrote:
>> "jgardner@jonathangardner.net" <jgardner@jonathangardner.net> writes:
>>> My question is how can I configure the database to run as quickly as
>>> possible if I don't care about data consistency or durability? That
>>> is, the data is updated so often and it can be reproduced fairly
>>> rapidly so that if there is a server crash or random particles from
>>> space mess up memory we'd just restart the machine and move on.
>>
>> For such a scenario, I'd suggest you:
>>
>> - Set up a filesystem that is memory-backed. On Linux, RamFS or TmpFS
>> are reasonable options for this.
>>
>> - The complication would be that your "restart the machine and move
>> on" needs to consist of quite a few steps:
>>
>> - recreating the filesystem
>> - fixing permissions as needed
>> - running initdb to set up new PG instance
>> - automating any needful fiddling with postgresql.conf, pg_hba.conf
>> - starting up that PG instance
>> - creating users, databases, schemas, ...
How about this: Set up a database entirely on a RAM disk, then install a WAL-logging warm standby. If the production computer goes down, you bring the warm standby online, shut it down, and use tar(1) to recreate the database on the production server when you bring it back online. You have speed and you have near-100% backup.
Craig
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-15 17:37 Chris Browne <cbbrowne@acm.org>
parent: Steve Wampler <swampler@noao.edu>
1 sibling, 2 replies; 73+ messages in thread
From: Chris Browne @ 2010-06-15 17:37 UTC (permalink / raw)
To: pgsql-performance
swampler@noao.edu (Steve Wampler) writes:
> Or does losing WAL files mandate a new initdb?
Losing WAL would mandate initdb, so I'd think this all fits into the
set of stuff worth putting onto ramfs/tmpfs. Certainly it'll all be
significant to the performance focus.
--
select 'cbbrowne' || '@' || 'cbbrowne.com';
http://cbbrowne.com/info/internet.html
"MS apparently now has a team dedicated to tracking problems with
Linux and publicizing them. I guess eventually they'll figure out
this back fires... ;)" -- William Burrow <aa126@DELETE.fan.nb.ca>
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-15 23:09 Jaime Casanova <jaime@2ndquadrant.com>
parent: Chris Browne <cbbrowne@acm.org>
1 sibling, 0 replies; 73+ messages in thread
From: Jaime Casanova @ 2010-06-15 23:09 UTC (permalink / raw)
To: Chris Browne <cbbrowne@acm.org>; +Cc: pgsql-performance
On Tue, Jun 15, 2010 at 12:37 PM, Chris Browne <cbbrowne@acm.org> wrote:
> swampler@noao.edu (Steve Wampler) writes:
>> Or does losing WAL files mandate a new initdb?
>
> Losing WAL would mandate initdb, so I'd think this all fits into the
> set of stuff worth putting onto ramfs/tmpfs. Certainly it'll all be
> significant to the performance focus.
why is that? isn't simply execute pg_resetxlog enough? specially
'cause OP doesn't care about loosing some transactions
--
Jaime Casanova www.2ndQuadrant.com
Soporte y capacitación de PostgreSQL
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-15 23:18 Josh Berkus <josh@agliodbs.com>
parent: Chris Browne <cbbrowne@acm.org>
1 sibling, 1 reply; 73+ messages in thread
From: Josh Berkus @ 2010-06-15 23:18 UTC (permalink / raw)
To: pgsql-performance
On 6/15/10 10:37 AM, Chris Browne wrote:
> swampler@noao.edu (Steve Wampler) writes:
>> Or does losing WAL files mandate a new initdb?
>
> Losing WAL would mandate initdb, so I'd think this all fits into the
> set of stuff worth putting onto ramfs/tmpfs. Certainly it'll all be
> significant to the performance focus.
I'd like to see some figures about WAL on RAMfs vs. simply turning off
fsync and full_page_writes. Per Gavin's tests, PostgreSQL is already
close to TokyoCabinet/MongoDB performance just with those turned off; I
wonder if actually having the WAL on a memory partition would make any
real difference in throughput.
I've seen a lot of call for this recently, especially since PostgreSQL
seems to be increasingly in use as a reporting server for Hadoop. Might
be worth experimenting with just making wal writing a no-op. We'd also
want to disable checkpointing, of course.
--
-- Josh Berkus
PostgreSQL Experts Inc.
http://www.pgexperts.com
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 06:30 jgardner@jonathangardner.net <jgardner@jonathangardner.net>
parent: Josh Berkus <josh@agliodbs.com>
0 siblings, 6 replies; 73+ messages in thread
From: jgardner@jonathangardner.net @ 2010-06-16 06:30 UTC (permalink / raw)
To: pgsql-performance
On Jun 15, 4:18 pm, j...@agliodbs.com (Josh Berkus) wrote:
> On 6/15/10 10:37 AM, Chris Browne wrote:
>
> I'd like to see some figures about WAL on RAMfs vs. simply turning off
> fsync and full_page_writes. Per Gavin's tests, PostgreSQL is already
> close to TokyoCabinet/MongoDB performance just with those turned off; I
> wonder if actually having the WAL on a memory partition would make any
> real difference in throughput.
>
> I've seen a lot of call for this recently, especially since PostgreSQL
> seems to be increasingly in use as a reporting server for Hadoop. Might
> be worth experimenting with just making wal writing a no-op. We'd also
> want to disable checkpointing, of course.
>
My back-of-the-envelope experiment: Inserting single integers into a
table without indexes using a prepared query via psycopg2.
Python Script:
import psycopg2
from time import time
conn = psycopg2.connect(database='jgardner')
cursor = conn.cursor()
cursor.execute("CREATE TABLE test (data int not null)")
conn.commit()
cursor.execute("PREPARE ins AS INSERT INTO test VALUES ($1)")
conn.commit()
start = time()
tx = 0
while time() - start < 1.0:
cursor.execute("EXECUTE ins(%s)", (tx,));
conn.commit()
tx += 1
print tx
cursor.execute("DROP TABLE test");
conn.commit();
Local disk, WAL on same FS:
* Default config => 90
* full_page_writes=off => 90
* synchronous_commit=off => 4,500
* fsync=off => 5,100
* fsync=off and synchronous_commit=off => 5,500
* fsync=off and full_page_writes=off => 5,150
* fsync=off, synchronous_commit=off and full_page_writes=off => 5,500
tmpfs, WAL on same tmpfs:
* Default config: 5,200
* full_page_writes=off => 5,200
* fsync=off => 5,250
* synchronous_commit=off => 5,200
* fsync=off and synchronous_commit=off => 5,450
* fsync=off and full_page_writes=off => 5,250
* fsync=off, synchronous_commit=off and full_page_writes=off => 5,500
NOTE: If I do one giant commit instead of lots of littler ones, I get
much better speeds for the slower cases, but I never exceed 5,500
which appears to be some kind of wall I can't break through.
If there's anything else I should tinker with, I'm all ears.
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 07:48 Mark Kirkwood <mark.kirkwood@catalyst.net.nz>
parent: jgardner@jonathangardner.net <jgardner@jonathangardner.net>
5 siblings, 0 replies; 73+ messages in thread
From: Mark Kirkwood @ 2010-06-16 07:48 UTC (permalink / raw)
To: pgsql-performance
On 16/06/10 18:30, jgardner@jonathangardner.net wrote:
> On Jun 15, 4:18 pm, j...@agliodbs.com (Josh Berkus) wrote:
>
>> On 6/15/10 10:37 AM, Chris Browne wrote:
>>
>> I'd like to see some figures about WAL on RAMfs vs. simply turning off
>> fsync and full_page_writes. Per Gavin's tests, PostgreSQL is already
>> close to TokyoCabinet/MongoDB performance just with those turned off; I
>> wonder if actually having the WAL on a memory partition would make any
>> real difference in throughput.
>>
>> I've seen a lot of call for this recently, especially since PostgreSQL
>> seems to be increasingly in use as a reporting server for Hadoop. Might
>> be worth experimenting with just making wal writing a no-op. We'd also
>> want to disable checkpointing, of course.
>>
>>
> My back-of-the-envelope experiment: Inserting single integers into a
> table without indexes using a prepared query via psycopg2.
>
> Python Script:
> import psycopg2
> from time import time
> conn = psycopg2.connect(database='jgardner')
> cursor = conn.cursor()
> cursor.execute("CREATE TABLE test (data int not null)")
> conn.commit()
> cursor.execute("PREPARE ins AS INSERT INTO test VALUES ($1)")
> conn.commit()
> start = time()
> tx = 0
> while time() - start< 1.0:
> cursor.execute("EXECUTE ins(%s)", (tx,));
> conn.commit()
> tx += 1
> print tx
> cursor.execute("DROP TABLE test");
> conn.commit();
>
> Local disk, WAL on same FS:
> * Default config => 90
> * full_page_writes=off => 90
> * synchronous_commit=off => 4,500
> * fsync=off => 5,100
> * fsync=off and synchronous_commit=off => 5,500
> * fsync=off and full_page_writes=off => 5,150
> * fsync=off, synchronous_commit=off and full_page_writes=off => 5,500
>
> tmpfs, WAL on same tmpfs:
> * Default config: 5,200
> * full_page_writes=off => 5,200
> * fsync=off => 5,250
> * synchronous_commit=off => 5,200
> * fsync=off and synchronous_commit=off => 5,450
> * fsync=off and full_page_writes=off => 5,250
> * fsync=off, synchronous_commit=off and full_page_writes=off => 5,500
>
> NOTE: If I do one giant commit instead of lots of littler ones, I get
> much better speeds for the slower cases, but I never exceed 5,500
> which appears to be some kind of wall I can't break through.
>
> If there's anything else I should tinker with, I'm all ears.
>
>
Seeing some profiler output (e.g oprofile) for the fastest case (and
maybe 'em all later) might be informative about what limit is being hit
here.
regards
Mark
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 07:51 Pierre C <lists@peufeu.com>
parent: jgardner@jonathangardner.net <jgardner@jonathangardner.net>
5 siblings, 1 reply; 73+ messages in thread
From: Pierre C @ 2010-06-16 07:51 UTC (permalink / raw)
To: jgardner@jonathangardner.net <jgardner@jonathangardner.net>; pgsql-performance
Have you tried connecting using a UNIX socket instead of a TCP socket on
localhost ? On such very short queries, the TCP overhead is significant.
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 07:53 Pierre C <lists@peufeu.com>
parent: jgardner@jonathangardner.net <jgardner@jonathangardner.net>
5 siblings, 0 replies; 73+ messages in thread
From: Pierre C @ 2010-06-16 07:53 UTC (permalink / raw)
To: jgardner@jonathangardner.net <jgardner@jonathangardner.net>; pgsql-performance
> Have you tried connecting using a UNIX socket instead of a TCP socket on
> localhost ? On such very short queries, the TCP overhead is significant.
Actually UNIX sockets are the default for psycopg2, had forgotten that.
I get 7400 using UNIX sockets and 3000 using TCP (host="localhost")
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 08:27 Greg Smith <greg@2ndquadrant.com>
parent: jgardner@jonathangardner.net <jgardner@jonathangardner.net>
5 siblings, 2 replies; 73+ messages in thread
From: Greg Smith @ 2010-06-16 08:27 UTC (permalink / raw)
To: jgardner@jonathangardner.net <jgardner@jonathangardner.net>; +Cc: pgsql-performance
jgardner@jonathangardner.net wrote:
> NOTE: If I do one giant commit instead of lots of littler ones, I get
> much better speeds for the slower cases, but I never exceed 5,500
> which appears to be some kind of wall I can't break through.
>
That's usually about where I run into the upper limit on how many
statements Python can execute against the database per second. Between
that and the GIL preventing better multi-core use, once you pull the
disk out and get CPU bound it's hard to use Python for load testing of
small statements and bottleneck anywhere except in Python itself.
I normally just write little performance test cases in the pgbench
scripting language, then I get multiple clients and (in 9.0) multiple
driver threads all for free.
--
Greg Smith 2ndQuadrant US Baltimore, MD
PostgreSQL Training, Services and Support
greg@2ndQuadrant.com www.2ndQuadrant.us
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 11:22 Pierre C <lists@peufeu.com>
parent: Greg Smith <greg@2ndquadrant.com>
1 sibling, 1 reply; 73+ messages in thread
From: Pierre C @ 2010-06-16 11:22 UTC (permalink / raw)
To: Greg Smith <greg@2ndquadrant.com>; jgardner@jonathangardner.net <jgardner@jonathangardner.net>; +Cc: pgsql-performance
FYI I've tweaked this program a bit :
import psycopg2
from time import time
conn = psycopg2.connect(database='peufeu')
cursor = conn.cursor()
cursor.execute("CREATE TEMPORARY TABLE test (data int not null)")
conn.commit()
cursor.execute("PREPARE ins AS INSERT INTO test VALUES ($1)")
cursor.execute("PREPARE sel AS SELECT 1")
conn.commit()
start = time()
tx = 0
N = 100
d = 0
while d < 10:
for n in xrange( N ):
cursor.execute("EXECUTE ins(%s)", (tx,));
#~ conn.commit()
#~ cursor.execute("EXECUTE sel" );
conn.commit()
d = time() - start
tx += N
print "result : %d tps" % (tx / d)
cursor.execute("DROP TABLE test");
conn.commit();
Results (Core 2 quad, ubuntu 10.04 64 bits) :
SELECT 1 : 21000 queries/s (I'd say 50 us per query isn't bad !)
INSERT with commit every 100 inserts : 17800 insets/s
INSERT with commit every INSERT : 7650 tps
fsync is on but not synchronous_commit.
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 17:37 Alvaro Herrera <alvherre@commandprompt.com>
parent: jgardner@jonathangardner.net <jgardner@jonathangardner.net>
5 siblings, 0 replies; 73+ messages in thread
From: Alvaro Herrera @ 2010-06-16 17:37 UTC (permalink / raw)
To: jgardner@jonathangardner.net <jgardner@jonathangardner.net>; +Cc: pgsql-performance
Excerpts from jgardner@jonathangardner.net's message of mié jun 16 02:30:30 -0400 2010:
> NOTE: If I do one giant commit instead of lots of littler ones, I get
> much better speeds for the slower cases, but I never exceed 5,500
> which appears to be some kind of wall I can't break through.
>
> If there's anything else I should tinker with, I'm all ears.
increase wal_buffers?
--
Álvaro Herrera <alvherre@commandprompt.com>
The PostgreSQL Company - Command Prompt, Inc.
PostgreSQL Replication, Consulting, Custom Development, 24x7 support
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 19:00 Josh Berkus <josh@agliodbs.com>
parent: jgardner@jonathangardner.net <jgardner@jonathangardner.net>
5 siblings, 2 replies; 73+ messages in thread
From: Josh Berkus @ 2010-06-16 19:00 UTC (permalink / raw)
To: pgsql-performance
> * fsync=off => 5,100
> * fsync=off and synchronous_commit=off => 5,500
Now, this *is* interesting ... why should synch_commit make a difference
if fsync is off?
Anyone have any ideas?
> tmpfs, WAL on same tmpfs:
> * Default config: 5,200
> * full_page_writes=off => 5,200
> * fsync=off => 5,250
> * synchronous_commit=off => 5,200
> * fsync=off and synchronous_commit=off => 5,450
> * fsync=off and full_page_writes=off => 5,250
> * fsync=off, synchronous_commit=off and full_page_writes=off => 5,500
So, in this test, it seems like having WAL on tmpfs doesn't make a
significant difference for everything == off.
I'll try running some tests on Amazon when I have a chance. It would be
worthwhile to get figures without Python's "ceiling".
--
-- Josh Berkus
PostgreSQL Experts Inc.
http://www.pgexperts.com
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 19:11 Jonathan Gardner <jgardner@jonathangardner.net>
parent: Pierre C <lists@peufeu.com>
0 siblings, 0 replies; 73+ messages in thread
From: Jonathan Gardner @ 2010-06-16 19:11 UTC (permalink / raw)
To: Pierre C <lists@peufeu.com>; +Cc: pgsql-performance
On Wed, Jun 16, 2010 at 12:51 AM, Pierre C <lists@peufeu.com> wrote:
>
> Have you tried connecting using a UNIX socket instead of a TCP socket on
> localhost ? On such very short queries, the TCP overhead is significant.
>
Unfortunately, this isn't an option for my use case. Carbonado only
supports TCP connections.
--
Jonathan Gardner
jgardner@jonathangardner.net
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 19:17 Jonathan Gardner <jgardner@jonathangardner.net>
parent: Pierre C <lists@peufeu.com>
0 siblings, 1 reply; 73+ messages in thread
From: Jonathan Gardner @ 2010-06-16 19:17 UTC (permalink / raw)
To: Pierre C <lists@peufeu.com>; +Cc: Greg Smith <greg@2ndquadrant.com>; pgsql-performance
On Wed, Jun 16, 2010 at 4:22 AM, Pierre C <lists@peufeu.com> wrote:
>
> import psycopg2
> from time import time
> conn = psycopg2.connect(database='peufeu')
> cursor = conn.cursor()
> cursor.execute("CREATE TEMPORARY TABLE test (data int not null)")
> conn.commit()
> cursor.execute("PREPARE ins AS INSERT INTO test VALUES ($1)")
> cursor.execute("PREPARE sel AS SELECT 1")
> conn.commit()
> start = time()
> tx = 0
> N = 100
> d = 0
> while d < 10:
> for n in xrange( N ):
> cursor.execute("EXECUTE ins(%s)", (tx,));
> #~ conn.commit()
> #~ cursor.execute("EXECUTE sel" );
> conn.commit()
> d = time() - start
> tx += N
> print "result : %d tps" % (tx / d)
> cursor.execute("DROP TABLE test");
> conn.commit();
>
I'm not surprised that Python add is so slow, but I am surprised that
I didn't remember it was... ;-)
--
Jonathan Gardner
jgardner@jonathangardner.net
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 19:19 Jonathan Gardner <jgardner@jonathangardner.net>
parent: Josh Berkus <josh@agliodbs.com>
1 sibling, 1 reply; 73+ messages in thread
From: Jonathan Gardner @ 2010-06-16 19:19 UTC (permalink / raw)
To: Josh Berkus <josh@agliodbs.com>; +Cc: pgsql-performance
On Wed, Jun 16, 2010 at 12:00 PM, Josh Berkus <josh@agliodbs.com> wrote:
>
>> * fsync=off => 5,100
>> * fsync=off and synchronous_commit=off => 5,500
>
> Now, this *is* interesting ... why should synch_commit make a difference
> if fsync is off?
>
> Anyone have any ideas?
>
I may have stumbled upon this by my ignorance, but I thought I read
that synchronous_commit controlled whether it tries to line up commits
or has a more free-for-all that may cause some intermediate weirdness.
--
Jonathan Gardner
jgardner@jonathangardner.net
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 19:22 Jonathan Gardner <jgardner@jonathangardner.net>
parent: Greg Smith <greg@2ndquadrant.com>
1 sibling, 0 replies; 73+ messages in thread
From: Jonathan Gardner @ 2010-06-16 19:22 UTC (permalink / raw)
To: Greg Smith <greg@2ndquadrant.com>; +Cc: pgsql-performance
On Wed, Jun 16, 2010 at 1:27 AM, Greg Smith <greg@2ndquadrant.com> wrote:
>
> I normally just write little performance test cases in the pgbench scripting
> language, then I get multiple clients and (in 9.0) multiple driver threads
> all for free.
>
See, this is why I love these mailing lists. I totally forgot about
pgbench. I'm going to dump my cheesy python script and play with that
for a while.
--
Jonathan Gardner
jgardner@jonathangardner.net
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 19:33 Balkrishna Sharma <b_ki@hotmail.com>
parent: Jonathan Gardner <jgardner@jonathangardner.net>
0 siblings, 0 replies; 73+ messages in thread
From: Balkrishna Sharma @ 2010-06-16 19:33 UTC (permalink / raw)
To: jgardner@jonathangardner.net; josh@agliodbs.com; +Cc: pgsql-performance
http://www.postgresql.org/docs/current/static/wal-async-commit.html
" the server waits for the transaction's WAL records to be flushed to permanent storage before returning a success indication to the client."
I think with fynch=off, whether WAL gets written to disk or not is still controlled by synchronous_commit parameter. guessing here...
> Date: Wed, 16 Jun 2010 12:19:20 -0700
> Subject: Re: [PERFORM] PostgreSQL as a local in-memory cache
> From: jgardner@jonathangardner.net
> To: josh@agliodbs.com
> CC: pgsql-performance@postgresql.org
>
> On Wed, Jun 16, 2010 at 12:00 PM, Josh Berkus <josh@agliodbs.com> wrote:
> >
> >> * fsync=off => 5,100
> >> * fsync=off and synchronous_commit=off => 5,500
> >
> > Now, this *is* interesting ... why should synch_commit make a difference
> > if fsync is off?
> >
> > Anyone have any ideas?
> >
>
> I may have stumbled upon this by my ignorance, but I thought I read
> that synchronous_commit controlled whether it tries to line up commits
> or has a more free-for-all that may cause some intermediate weirdness.
>
> --
> Jonathan Gardner
> jgardner@jonathangardner.net
>
> --
> Sent via pgsql-performance mailing list (pgsql-performance@postgresql.org)
> To make changes to your subscription:
> http://www.postgresql.org/mailpref/pgsql-performance
_________________________________________________________________
The New Busy is not the old busy. Search, chat and e-mail from your inbox.
http://www.windowslive.com/campaign/thenewbusy?ocid=PID28326::T:WLMTAGL:ON:WL:en-US:WM_HMP:042010_3=
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 19:36 Craig James <craig_james@emolecules.com>
parent: Josh Berkus <josh@agliodbs.com>
1 sibling, 0 replies; 73+ messages in thread
From: Craig James @ 2010-06-16 19:36 UTC (permalink / raw)
To: Josh Berkus <josh@agliodbs.com>; +Cc: pgsql-performance
On 6/16/10 12:00 PM, Josh Berkus wrote:
>
>> * fsync=off => 5,100
>> * fsync=off and synchronous_commit=off => 5,500
>
> Now, this *is* interesting ... why should synch_commit make a difference
> if fsync is off?
>
> Anyone have any ideas?
I found that pgbench has "noise" of about 20% (I posted about this a couple days ago using data from 1000 identical pgbench runs). Unless you make a bunch of runs and average them, a difference of 5,100 to 5,500 appears to be meaningless.
Craig
>
>> tmpfs, WAL on same tmpfs:
>> * Default config: 5,200
>> * full_page_writes=off => 5,200
>> * fsync=off => 5,250
>> * synchronous_commit=off => 5,200
>> * fsync=off and synchronous_commit=off => 5,450
>> * fsync=off and full_page_writes=off => 5,250
>> * fsync=off, synchronous_commit=off and full_page_writes=off => 5,500
>
> So, in this test, it seems like having WAL on tmpfs doesn't make a
> significant difference for everything == off.
>
> I'll try running some tests on Amazon when I have a chance. It would be
> worthwhile to get figures without Python's "ceiling".
>
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-16 20:40 Pierre C <lists@peufeu.com>
parent: Jonathan Gardner <jgardner@jonathangardner.net>
0 siblings, 0 replies; 73+ messages in thread
From: Pierre C @ 2010-06-16 20:40 UTC (permalink / raw)
To: Jonathan Gardner <jgardner@jonathangardner.net>; +Cc: Greg Smith <greg@2ndquadrant.com>; pgsql-performance
> I'm not surprised that Python add is so slow, but I am surprised that
> I didn't remember it was... ;-)
it's not the add(), it's the time.time()...
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-17 02:33 jgardner@jonathangardner.net <jgardner@jonathangardner.net>
parent: jgardner@jonathangardner.net <jgardner@jonathangardner.net>
2 siblings, 1 reply; 73+ messages in thread
From: jgardner@jonathangardner.net @ 2010-06-17 02:33 UTC (permalink / raw)
To: pgsql-performance
On Jun 14, 7:14 pm, "jgard...@jonathangardner.net"
<jgard...@jonathangardner.net> wrote:
> We have a fairly unique need for a local, in-memory cache. This will
> store data aggregated from other sources. Generating the data only
> takes a few minutes, and it is updated often. There will be some
> fairly expensive queries of arbitrary complexity run at a fairly high
> rate. We're looking for high concurrency and reasonable performance
> throughout.
>
> The entire data set is roughly 20 MB in size. We've tried Carbonado in
> front of SleepycatJE only to discover that it chokes at a fairly low
> concurrency and that Carbonado's rule-based optimizer is wholly
> insufficient for our needs. We've also tried Carbonado's Map
> Repository which suffers the same problems.
>
> I've since moved the backend database to a local PostgreSQL instance
> hoping to take advantage of PostgreSQL's superior performance at high
> concurrency. Of course, at the default settings, it performs quite
> poorly compares to the Map Repository and Sleepycat JE.
>
> My question is how can I configure the database to run as quickly as
> possible if I don't care about data consistency or durability? That
> is, the data is updated so often and it can be reproduced fairly
> rapidly so that if there is a server crash or random particles from
> space mess up memory we'd just restart the machine and move on.
>
> I've never configured PostgreSQL to work like this and I thought maybe
> someone here had some ideas on a good approach to this.
Just to summarize what I've been able to accomplish so far. By turning
fsync and synchronize_commit off, and moving the data dir to tmpfs,
I've been able to run the expensive queries much faster than BDB or
the MapRepository that comes with Carbonado. This is because
PostgreSQL's planner is so much faster and better than whatever
Carbonado has. Tweaking indexes has only made things run faster.
Right now I'm wrapping up the project so that we can do some serious
performance benchmarks. I'll let you all know how it goes.
Also, just a note that setting up PostgreSQL for these weird scenarios
turned out to be just a tiny bit harder than setting up SQLite. I
remember several years ago when there was a push to simplify the
configuration and installation of PostgreSQL, and I believe that that
has born fruit.
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-17 17:29 Josh Berkus <josh@agliodbs.com>
parent: jgardner@jonathangardner.net <jgardner@jonathangardner.net>
0 siblings, 4 replies; 73+ messages in thread
From: Josh Berkus @ 2010-06-17 17:29 UTC (permalink / raw)
To: pgsql-performance
All,
So, I've been discussing this because using PostgreSQL on the caching
layer has become more common that I think most people realize. Jonathan
is one of 4 companies I know of who are doing this, and with the growth
of Hadoop and other large-scale data-processing technologies, I think
demand will increase.
Especially as, in repeated tests, PostgreSQL with persistence turned off
is just as fast as the fastest nondurable NoSQL database. And it has a
LOT more features.
Now, while fsync=off and tmpfs for WAL more-or-less eliminate the IO for
durability, they don't eliminate the CPU time. Which means that a
caching version of PostgreSQL could be even faster. To do that, we'd
need to:
a) Eliminate WAL logging entirely
b) Eliminate checkpointing
c) Turn off the background writer
d) Have PostgreSQL refuse to restart after a crash and instead call an
exteral script (for reprovisioning)
Of the three above, (a) is the most difficult codewise. (b)(c) and (d)
should be relatively straightforwards, although I believe that we now
have the bgwriter doing some other essential work besides syncing
buffers. There's also a narrower use-case in eliminating (a), since a
non-fsync'd server which was recording WAL could be used as part of a
replication chain.
This isn't on hackers because I'm not ready to start working on a patch,
but I'd like some feedback on the complexities of doing (b) and (c) as
well as how many people could use a non-persistant, in-memory postgres.
--
-- Josh Berkus
PostgreSQL Experts Inc.
http://www.pgexperts.com
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-17 18:44 Pierre C <lists@peufeu.com>
parent: Josh Berkus <josh@agliodbs.com>
3 siblings, 0 replies; 73+ messages in thread
From: Pierre C @ 2010-06-17 18:44 UTC (permalink / raw)
To: Josh Berkus <josh@agliodbs.com>; pgsql-performance
> Especially as, in repeated tests, PostgreSQL with persistence turned off
> is just as fast as the fastest nondurable NoSQL database. And it has a
> LOT more features.
An option to completely disable WAL for such use cases would make it a lot
faster, especially in the case of heavy concurrent writes.
> Now, while fsync=off and tmpfs for WAL more-or-less eliminate the IO for
> durability, they don't eliminate the CPU time.
Actually the WAL overhead is some CPU and lots of locking.
> Which means that a caching version of PostgreSQL could be even faster.
> To do that, we'd need to:
>
> a) Eliminate WAL logging entirely
> b) Eliminate checkpointing
> c) Turn off the background writer
> d) Have PostgreSQL refuse to restart after a crash and instead call an
> exteral script (for reprovisioning)
>
> Of the three above, (a) is the most difficult codewise.
Actually, it's pretty easy, look in xlog.c
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-17 19:01 Dimitri Fontaine <dfontaine@hi-media.com>
parent: Josh Berkus <josh@agliodbs.com>
3 siblings, 3 replies; 73+ messages in thread
From: Dimitri Fontaine @ 2010-06-17 19:01 UTC (permalink / raw)
To: Josh Berkus <josh@agliodbs.com>; +Cc: pgsql-performance
Hi,
Josh Berkus <josh@agliodbs.com> writes:
> a) Eliminate WAL logging entirely
> b) Eliminate checkpointing
> c) Turn off the background writer
> d) Have PostgreSQL refuse to restart after a crash and instead call an
> exteral script (for reprovisioning)
Well I guess I'd prefer a per-transaction setting, allowing to bypass
WAL logging and checkpointing. Forcing the backend to care itself for
writing the data I'm not sure is a good thing, but if you say so.
Then you could have the GUC set for a whole cluster, only a database
etc. We already have synchronous_commit to trade durability against
performances, we could maybe support protect_data = off too.
The d) point I'm not sure still applies if you have per transaction
setting, which I think makes the most sense. The data you choose not to
protect is missing at restart, just add some way to register a hook
there. We already have one (shared_preload_libraries) but it requires
coding in C.
Calling a user function at the end of recovery and before accepting
connection would be good I think. A user function (per database) is
better than a script because if you want to run it before accepting
connections and still cause changes in the database…
Regards,
--
dim
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-17 19:38 Tom Lane <tgl@sss.pgh.pa.us>
parent: Dimitri Fontaine <dfontaine@hi-media.com>
2 siblings, 2 replies; 73+ messages in thread
From: Tom Lane @ 2010-06-17 19:38 UTC (permalink / raw)
To: Dimitri Fontaine <dfontaine@hi-media.com>; +Cc: Josh Berkus <josh@agliodbs.com>; pgsql-performance
Dimitri Fontaine <dfontaine@hi-media.com> writes:
> Josh Berkus <josh@agliodbs.com> writes:
>> a) Eliminate WAL logging entirely
>> b) Eliminate checkpointing
>> c) Turn off the background writer
>> d) Have PostgreSQL refuse to restart after a crash and instead call an
>> exteral script (for reprovisioning)
> Well I guess I'd prefer a per-transaction setting, allowing to bypass
> WAL logging and checkpointing.
Not going to happen; this is all or nothing.
> Forcing the backend to care itself for
> writing the data I'm not sure is a good thing, but if you say so.
Yeah, I think proposal (c) is likely to be a net loss.
(a) and (d) are probably simple, if by "reprovisioning" you mean
"rm -rf $PGDATA; initdb". Point (b) will be a bit trickier because
there are various housekeeping activities tied into checkpoints.
I think you can't actually remove checkpoints altogether, just
skip the flush-dirty-pages part.
regards, tom lane
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-17 19:59 Greg Smith <greg@2ndquadrant.com>
parent: Josh Berkus <josh@agliodbs.com>
3 siblings, 0 replies; 73+ messages in thread
From: Greg Smith @ 2010-06-17 19:59 UTC (permalink / raw)
To: Josh Berkus <josh@agliodbs.com>; +Cc: pgsql-performance
Josh Berkus wrote:
> a) Eliminate WAL logging entirely
> c) Turn off the background writer
Note that if you turn off full_page_writes and set
bgwriter_lru_maxpages=0, you'd get a substantial move in both these
directions without touching any code. Would help prove those as useful
directions to move toward or not. The difference in WAL writes just
after a checkpoint in particular, due to the full_page_writes behavior,
is a significant portion of total WAL activity on most systems.
--
Greg Smith 2ndQuadrant US Baltimore, MD
PostgreSQL Training, Services and Support
greg@2ndQuadrant.com www.2ndQuadrant.us
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-17 20:12 Pierre C <lists@peufeu.com>
parent: Dimitri Fontaine <dfontaine@hi-media.com>
2 siblings, 1 reply; 73+ messages in thread
From: Pierre C @ 2010-06-17 20:12 UTC (permalink / raw)
To: Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; +Cc: pgsql-performance
> Well I guess I'd prefer a per-transaction setting, allowing to bypass
> WAL logging and checkpointing. Forcing the backend to care itself for
> writing the data I'm not sure is a good thing, but if you say so.
Well if the transaction touches a system catalog it better be WAL-logged...
A per-table (or per-index) setting makes more sense IMHO. For instance "on
recovery, truncate this table" (this was mentioned before).
Another option would be "make the table data safe, but on recovery,
destroy and rebuild this index" : because on a not so large, often updated
table, with often updated indexes, it may not take long to rebuild the
indexes, but all those wal-logged index updates do add some overhead.
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-17 23:01 Josh Berkus <josh@agliodbs.com>
parent: Dimitri Fontaine <dfontaine@hi-media.com>
2 siblings, 1 reply; 73+ messages in thread
From: Josh Berkus @ 2010-06-17 23:01 UTC (permalink / raw)
To: pgsql-performance
> Well I guess I'd prefer a per-transaction setting, allowing to bypass
> WAL logging and checkpointing.
Not even conceiveable. For this to work, we're talking about the whole
database installation. This is only a set of settings for a database
*server* which is considered disposable and replaceable, where if it
shuts down unexpectedly, you throw it away and replace it.
> Forcing the backend to care itself for
> writing the data I'm not sure is a good thing, but if you say so.
Oh, yeah, I guess we'd only be turning off the LRU cache operations of
the background writer. Same with checkpoints. Copying between
shared_buffers and the LRU cache would still happen.
> Calling a user function at the end of recovery and before accepting
> connection would be good I think. A user function (per database) is
> better than a script because if you want to run it before accepting
> connections and still cause changes in the database…
Hmmm, you're not quite following my idea. There is no recovery. If the
database shuts down unexpectedly, it's toast and you replace it from
another copy somewhere else.
> (a) and (d) are probably simple, if by "reprovisioning" you mean
> "rm -rf $PGDATA; initdb".
Exactly. Followed by "scp database_image". Or heck, just replacing the
whole VM.
> Point (b) will be a bit trickier because
> there are various housekeeping activities tied into checkpoints.
> I think you can't actually remove checkpoints altogether, just
> skip the flush-dirty-pages part.
Yes, and we'd want to flush dirty pages on an actual shutdown command.
We do want to be able to shut down the DB on purpose.
> Well if the transaction touches a system catalog it better be
> WAL-logged...
Given the above, why?
--
-- Josh Berkus
PostgreSQL Experts Inc.
http://www.pgexperts.com
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-17 23:25 Tom Lane <tgl@sss.pgh.pa.us>
parent: Josh Berkus <josh@agliodbs.com>
0 siblings, 0 replies; 73+ messages in thread
From: Tom Lane @ 2010-06-17 23:25 UTC (permalink / raw)
To: Josh Berkus <josh@agliodbs.com>; +Cc: pgsql-performance
Josh Berkus <josh@agliodbs.com> writes:
>> (a) and (d) are probably simple, if by "reprovisioning" you mean
>> "rm -rf $PGDATA; initdb".
> Exactly. Followed by "scp database_image". Or heck, just replacing the
> whole VM.
Right, that would work. I don't think you really need to implement that
inside Postgres. I would envision having the startup script do it, ie
rm -rf $PGDATA
cp -pr prepared-database-image $PGDATA
# this loop exits when postmaster exits normally
while ! postmaster ...
do
rm -rf $PGDATA
cp -pr prepared-database-image $PGDATA
done
Then all you need is a tweak to make the postmaster exit(1) after
a crash instead of trying to launch recovery.
regards, tom lane
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-18 09:15 Matthew Wakeling <matthew@flymine.org>
parent: Pierre C <lists@peufeu.com>
0 siblings, 2 replies; 73+ messages in thread
From: Matthew Wakeling @ 2010-06-18 09:15 UTC (permalink / raw)
To: Pierre C <lists@peufeu.com>; +Cc: Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Dimitri Fontaine wrote:
>> Well I guess I'd prefer a per-transaction setting
Not possible, as many others have said. As soon as you make an unsafe
transaction, all the other transactions have nothing to rely on.
On Thu, 17 Jun 2010, Pierre C wrote:
> A per-table (or per-index) setting makes more sense IMHO. For instance "on
> recovery, truncate this table" (this was mentioned before).
That would be much more valuable.
I'd like to point out the costs involved in having a whole separate
"version" of Postgres that has all this safety switched off. Package
managers will not thank anyone for having to distribute another version of
the system, and woe betide the user who installs the wrong version because
"it runs faster". No, this is much better as a configurable option.
Going back to the "on recovery, truncate this table". We already have a
mechanism for skipping the WAL writes on an entire table - we do that for
tables that have been created in the current transaction. It would surely
be a small step to allow this to be configurably permanent on a particular
table.
Moreover, we already have a mechanism for taking a table that has had
non-logged changes, and turning it into a fully logged table - we do that
to the above mentioned tables when the transaction commits. I would
strongly recommend providing an option to ALTER TABLE MAKE SAFE, which may
involve some more acrobatics if the table is currently in use by multiple
transactions, but would be valuable.
This would allow users to create "temporary tables" that can be shared by
several connections. It would also allow bulk loading in parallel of a
single large table.
With these suggestions, we would still need to WAL-log all the metadata
changes, but I think in most circumstances that is not going to be a large
burden on performance.
Matthew
--
Picard: I was just paid a visit from Q.
Riker: Q! Any idea what he's up to?
Picard: No. He said he wanted to be "nice" to me.
Riker: I'll alert the crew.
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-18 09:40 Pierre C <lists@peufeu.com>
parent: Matthew Wakeling <matthew@flymine.org>
1 sibling, 1 reply; 73+ messages in thread
From: Pierre C @ 2010-06-18 09:40 UTC (permalink / raw)
To: Matthew Wakeling <matthew@flymine.org>; +Cc: Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
> I'd like to point out the costs involved in having a whole separate
> "version"
It must be a setting, not a version.
For instance suppose you have a session table for your website and a users
table.
- Having ACID on the users table is of course a must ;
- for the sessions table you can drop the "D"
Server crash would force all users to re-login on your website but if your
server crashes enough that your users complain about that, you have
another problem anyway. Having the sessions table not WAL-logged (ie
faster) would not prevent you from having sessions.user_id REFERENCES
users( user_id ) ... so mixing safe and unsafe tables would be much more
powerful than just having unsafe tables.
And I really like the idea of non-WAL-logged indexes, too, since they can
be rebuilt as needed, the DBA could decide between faster index updates
but rebuild on crash, or normal updates and fast recovery.
Also materialized views etc, you can rebuild them on crash and the added
update speed would be good.
> Moreover, we already have a mechanism for taking a table that has had
> non-logged changes, and turning it into a fully logged table - we do
> that to the above mentioned tables when the transaction commits. I would
> strongly recommend providing an option to ALTER TABLE MAKE SAFE, which
> may involve some more acrobatics if the table is currently in use by
> multiple transactions, but would be valuable.
I believe the old discussions called this ALTER TABLE SET PERSISTENCE.
> This would allow users to create "temporary tables" that can be shared
> by several connections. It would also allow bulk loading in parallel of
> a single large table.
This would need to WAL-log the entire table to send it to the slaves if
replication is enabled, but it's a lot faster than replicating each record.
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-18 20:55 Josh Berkus <josh@agliodbs.com>
parent: Pierre C <lists@peufeu.com>
0 siblings, 1 reply; 73+ messages in thread
From: Josh Berkus @ 2010-06-18 20:55 UTC (permalink / raw)
To: Pierre C <lists@peufeu.com>; +Cc: pgsql-performance
> It must be a setting, not a version.
>
> For instance suppose you have a session table for your website and a
> users table.
>
> - Having ACID on the users table is of course a must ;
> - for the sessions table you can drop the "D"
You're trying to solve a different use-case than the one I am.
Your use-case will be solved by global temporary tables. I suggest that
you give Robert Haas some help & feedback on that.
My use case is people using PostgreSQL as a cache, or relying entirely
on replication for durability.
--
-- Josh Berkus
PostgreSQL Experts Inc.
http://www.pgexperts.com
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-18 20:56 Josh Berkus <josh@agliodbs.com>
parent: Matthew Wakeling <matthew@flymine.org>
1 sibling, 0 replies; 73+ messages in thread
From: Josh Berkus @ 2010-06-18 20:56 UTC (permalink / raw)
To: pgsql-performance
On 6/18/10 2:15 AM, Matthew Wakeling wrote:
> I'd like to point out the costs involved in having a whole separate
> "version" of Postgres that has all this safety switched off. Package
> managers will not thank anyone for having to distribute another version
> of the system, and woe betide the user who installs the wrong version
> because "it runs faster". No, this is much better as a configurable option.
Agreed, although initial alphas of this concept are likely to in fact be
a separate source code tree. Eventually when we have it working well it
could become an initdb-time option.
--
-- Josh Berkus
PostgreSQL Experts Inc.
http://www.pgexperts.com
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-21 22:14 Robert Haas <robertmhaas@gmail.com>
parent: Josh Berkus <josh@agliodbs.com>
3 siblings, 0 replies; 73+ messages in thread
From: Robert Haas @ 2010-06-21 22:14 UTC (permalink / raw)
To: Josh Berkus <josh@agliodbs.com>; +Cc: pgsql-performance
On Thu, Jun 17, 2010 at 1:29 PM, Josh Berkus <josh@agliodbs.com> wrote:
> a) Eliminate WAL logging entirely
In addition to global temporary tables, I am also planning to
implement unlogged tables, which are, precisely, tables for which no
WAL is written. On restart, any such tables will be truncated. That
should give you the ability to do this (by making all your tables
unlogged).
--
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise Postgres Company
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-23 19:37 Bruce Momjian <bruce@momjian.us>
parent: Tom Lane <tgl@sss.pgh.pa.us>
1 sibling, 2 replies; 73+ messages in thread
From: Bruce Momjian @ 2010-06-23 19:37 UTC (permalink / raw)
To: Tom Lane <tgl@sss.pgh.pa.us>; +Cc: Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Tom Lane wrote:
> Dimitri Fontaine <dfontaine@hi-media.com> writes:
> > Josh Berkus <josh@agliodbs.com> writes:
> >> a) Eliminate WAL logging entirely
If we elimiate WAL logging, that means a reinstall is required for even
a postmaster crash, which is a new non-durable behavior.
Also, we just added wal_level = minimal, which might end up being a poor
name choice of we want wal_level = off in PG 9.1. Perhaps we should
have used wal_level = crash_safe in 9.0.
I have added the following TODO:
Consider a non-crash-safe wal_level that eliminates WAL activity
* http://archives.postgresql.org/pgsql-performance/2010-06/msg00300.php
--
Bruce Momjian <bruce@momjian.us> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ None of us is going to be here forever. +
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-23 19:40 Bruce Momjian <bruce@momjian.us>
parent: Tom Lane <tgl@sss.pgh.pa.us>
1 sibling, 1 reply; 73+ messages in thread
From: Bruce Momjian @ 2010-06-23 19:40 UTC (permalink / raw)
To: Tom Lane <tgl@sss.pgh.pa.us>; +Cc: Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Tom Lane wrote:
> Dimitri Fontaine <dfontaine@hi-media.com> writes:
> > Josh Berkus <josh@agliodbs.com> writes:
> >> a) Eliminate WAL logging entirely
> >> b) Eliminate checkpointing
> >> c) Turn off the background writer
> >> d) Have PostgreSQL refuse to restart after a crash and instead call an
> >> exteral script (for reprovisioning)
>
> > Well I guess I'd prefer a per-transaction setting, allowing to bypass
> > WAL logging and checkpointing.
>
> Not going to happen; this is all or nothing.
>
> > Forcing the backend to care itself for
> > writing the data I'm not sure is a good thing, but if you say so.
>
> Yeah, I think proposal (c) is likely to be a net loss.
>
> (a) and (d) are probably simple, if by "reprovisioning" you mean
> "rm -rf $PGDATA; initdb". Point (b) will be a bit trickier because
> there are various housekeeping activities tied into checkpoints.
> I think you can't actually remove checkpoints altogether, just
> skip the flush-dirty-pages part.
Based on this thread, I have developed the following documentation patch
that outlines the performance enhancements possible if durability is not
required. The patch also documents that synchronous_commit = false has
potential committed transaction loss from a database crash (as well as
an OS crash).
--
Bruce Momjian <bruce@momjian.us> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ None of us is going to be here forever. +
Attachments:
/pgpatches/durability (text/x-diff, 4.0K) download
Index: doc/src/sgml/config.sgml
===================================================================
RCS file: /cvsroot/pgsql/doc/src/sgml/config.sgml,v
retrieving revision 1.282
diff -c -c -r1.282 config.sgml
*** doc/src/sgml/config.sgml 22 Jun 2010 02:57:49 -0000 1.282
--- doc/src/sgml/config.sgml 23 Jun 2010 18:53:26 -0000
***************
*** 1463,1469 ****
really guaranteed to be safe against a server crash. (The maximum
delay is three times <xref linkend="guc-wal-writer-delay">.) Unlike
<xref linkend="guc-fsync">, setting this parameter to <literal>off</>
! does not create any risk of database inconsistency: a crash might
result in some recent allegedly-committed transactions being lost, but
the database state will be just the same as if those transactions had
been aborted cleanly. So, turning <varname>synchronous_commit</> off
--- 1463,1470 ----
really guaranteed to be safe against a server crash. (The maximum
delay is three times <xref linkend="guc-wal-writer-delay">.) Unlike
<xref linkend="guc-fsync">, setting this parameter to <literal>off</>
! does not create any risk of database inconsistency: an operating
! system or database crash crash might
result in some recent allegedly-committed transactions being lost, but
the database state will be just the same as if those transactions had
been aborted cleanly. So, turning <varname>synchronous_commit</> off
Index: doc/src/sgml/perform.sgml
===================================================================
RCS file: /cvsroot/pgsql/doc/src/sgml/perform.sgml,v
retrieving revision 1.80
diff -c -c -r1.80 perform.sgml
*** doc/src/sgml/perform.sgml 29 May 2010 21:08:04 -0000 1.80
--- doc/src/sgml/perform.sgml 23 Jun 2010 18:53:26 -0000
***************
*** 1104,1107 ****
--- 1104,1169 ----
</sect2>
</sect1>
+ <sect1 id="non-durability">
+ <title>Non-Durable Settings</title>
+
+ <indexterm zone="non-durability">
+ <primary>non-durable</primary>
+ </indexterm>
+
+ <para>
+ Durability is a database feature that guarantees the recording of
+ committed transactions even if if the server crashes or loses
+ power. However, durability adds significant database overhead,
+ so if your site does not require such a guarantee,
+ <productname>PostgreSQL</productname> can be configured to run
+ much faster. The following are configuration changes you can make
+ to improve performance in such cases; they do not invalidate
+ commit guarantees related to database crashes, only abrupt operating
+ system stoppage, except as mentioned below:
+
+ <itemizedlist>
+ <listitem>
+ <para>
+ Place the database cluster's data directory in a memory-backed
+ file system (i.e. <acronym>RAM</> disk). This eliminates all
+ database disk I/O, but limits data storage to the amount of
+ available memory (and perhaps swap).
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Turn off <xref linkend="guc-fsync">; there is no need to flush
+ data to disk.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Turn off <xref linkend="guc-full-page-writes">; there is no need
+ to guard against partial page writes.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Increase <xref linkend="guc-checkpoint-segments"> and <xref
+ linkend="guc-checkpoint-timeout"> ; this reduces the frequency
+ of checkpoints, but increases the storage requirements of
+ <filename>/pg_xlog</>.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Turn off <xref linkend="guc-synchronous-commit">; there might be no
+ need to write the <acronym>WAL</acronym> to disk on every
+ commit. This does affect database crash transaction durability.
+ </para>
+ </listitem>
+ </itemizedlist>
+ </para>
+ </sect1>
+
</chapter>
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-23 19:51 Pavel Stehule <pavel.stehule@gmail.com>
parent: Bruce Momjian <bruce@momjian.us>
1 sibling, 1 reply; 73+ messages in thread
From: Pavel Stehule @ 2010-06-23 19:51 UTC (permalink / raw)
To: Bruce Momjian <bruce@momjian.us>; +Cc: Tom Lane <tgl@sss.pgh.pa.us>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
2010/6/23 Bruce Momjian <bruce@momjian.us>:
> Tom Lane wrote:
>> Dimitri Fontaine <dfontaine@hi-media.com> writes:
>> > Josh Berkus <josh@agliodbs.com> writes:
>> >> a) Eliminate WAL logging entirely
>
> If we elimiate WAL logging, that means a reinstall is required for even
> a postmaster crash, which is a new non-durable behavior.
>
> Also, we just added wal_level = minimal, which might end up being a poor
> name choice of we want wal_level = off in PG 9.1. Perhaps we should
> have used wal_level = crash_safe in 9.0.
>
> I have added the following TODO:
>
> Consider a non-crash-safe wal_level that eliminates WAL activity
>
> * http://archives.postgresql.org/pgsql-performance/2010-06/msg00300.php
>
> --
isn't fsync to off enought?
Regards
Pavel
> Bruce Momjian <bruce@momjian.us> http://momjian.us
> EnterpriseDB http://enterprisedb.com
>
> + None of us is going to be here forever. +
>
> --
> Sent via pgsql-performance mailing list (pgsql-performance@postgresql.org)
> To make changes to your subscription:
> http://www.postgresql.org/mailpref/pgsql-performance
>
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-23 20:16 Bruce Momjian <bruce@momjian.us>
parent: Pavel Stehule <pavel.stehule@gmail.com>
0 siblings, 0 replies; 73+ messages in thread
From: Bruce Momjian @ 2010-06-23 20:16 UTC (permalink / raw)
To: Pavel Stehule <pavel.stehule@gmail.com>; +Cc: Tom Lane <tgl@sss.pgh.pa.us>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Pavel Stehule wrote:
> 2010/6/23 Bruce Momjian <bruce@momjian.us>:
> > Tom Lane wrote:
> >> Dimitri Fontaine <dfontaine@hi-media.com> writes:
> >> > Josh Berkus <josh@agliodbs.com> writes:
> >> >> a) Eliminate WAL logging entirely
> >
> > If we elimiate WAL logging, that means a reinstall is required for even
> > a postmaster crash, which is a new non-durable behavior.
> >
> > Also, we just added wal_level = minimal, which might end up being a poor
> > name choice of we want wal_level = off in PG 9.1. ?Perhaps we should
> > have used wal_level = crash_safe in 9.0.
> >
> > I have added the following TODO:
> >
> > ? ? ? ?Consider a non-crash-safe wal_level that eliminates WAL activity
> >
> > ? ? ? ? ? ?* http://archives.postgresql.org/pgsql-performance/2010-06/msg00300.php
> >
> > --
>
> isn't fsync to off enought?
Well, testing reported in the thread showed other settings also help,
though the checkpoint lengthening was not tested.
--
Bruce Momjian <bruce@momjian.us> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ None of us is going to be here forever. +
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-23 20:25 Robert Haas <robertmhaas@gmail.com>
parent: Bruce Momjian <bruce@momjian.us>
1 sibling, 2 replies; 73+ messages in thread
From: Robert Haas @ 2010-06-23 20:25 UTC (permalink / raw)
To: Bruce Momjian <bruce@momjian.us>; +Cc: Tom Lane <tgl@sss.pgh.pa.us>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
On Wed, Jun 23, 2010 at 3:37 PM, Bruce Momjian <bruce@momjian.us> wrote:
> Tom Lane wrote:
>> Dimitri Fontaine <dfontaine@hi-media.com> writes:
>> > Josh Berkus <josh@agliodbs.com> writes:
>> >> a) Eliminate WAL logging entirely
>
> If we elimiate WAL logging, that means a reinstall is required for even
> a postmaster crash, which is a new non-durable behavior.
>
> Also, we just added wal_level = minimal, which might end up being a poor
> name choice of we want wal_level = off in PG 9.1. Perhaps we should
> have used wal_level = crash_safe in 9.0.
>
> I have added the following TODO:
>
> Consider a non-crash-safe wal_level that eliminates WAL activity
>
> * http://archives.postgresql.org/pgsql-performance/2010-06/msg00300.php
I don't think we need a system-wide setting for that. I believe that
the unlogged tables I'm working on will handle that case.
--
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise Postgres Company
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-23 20:27 Dave Page <dpage@pgadmin.org>
parent: Robert Haas <robertmhaas@gmail.com>
1 sibling, 1 reply; 73+ messages in thread
From: Dave Page @ 2010-06-23 20:27 UTC (permalink / raw)
To: Robert Haas <robertmhaas@gmail.com>; +Cc: Bruce Momjian <bruce@momjian.us>; Tom Lane <tgl@sss.pgh.pa.us>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
On Wed, Jun 23, 2010 at 9:25 PM, Robert Haas <robertmhaas@gmail.com> wrote:
> On Wed, Jun 23, 2010 at 3:37 PM, Bruce Momjian <bruce@momjian.us> wrote:
>> Tom Lane wrote:
>>> Dimitri Fontaine <dfontaine@hi-media.com> writes:
>>> > Josh Berkus <josh@agliodbs.com> writes:
>>> >> a) Eliminate WAL logging entirely
>>
>> If we elimiate WAL logging, that means a reinstall is required for even
>> a postmaster crash, which is a new non-durable behavior.
>>
>> Also, we just added wal_level = minimal, which might end up being a poor
>> name choice of we want wal_level = off in PG 9.1. Perhaps we should
>> have used wal_level = crash_safe in 9.0.
>>
>> I have added the following TODO:
>>
>> Consider a non-crash-safe wal_level that eliminates WAL activity
>>
>> * http://archives.postgresql.org/pgsql-performance/2010-06/msg00300.php
>
> I don't think we need a system-wide setting for that. I believe that
> the unlogged tables I'm working on will handle that case.
Aren't they going to be truncated at startup? If the entire system is
running without WAL, we would only need to do that in case of an
unclean shutdown wouldn't we?
--
Dave Page
EnterpriseDB UK: http://www.enterprisedb.com
The Enterprise Postgres Company
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-23 20:27 Bruce Momjian <bruce@momjian.us>
parent: Robert Haas <robertmhaas@gmail.com>
1 sibling, 0 replies; 73+ messages in thread
From: Bruce Momjian @ 2010-06-23 20:27 UTC (permalink / raw)
To: Robert Haas <robertmhaas@gmail.com>; +Cc: Tom Lane <tgl@sss.pgh.pa.us>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Robert Haas wrote:
> On Wed, Jun 23, 2010 at 3:37 PM, Bruce Momjian <bruce@momjian.us> wrote:
> > Tom Lane wrote:
> >> Dimitri Fontaine <dfontaine@hi-media.com> writes:
> >> > Josh Berkus <josh@agliodbs.com> writes:
> >> >> a) Eliminate WAL logging entirely
> >
> > If we elimiate WAL logging, that means a reinstall is required for even
> > a postmaster crash, which is a new non-durable behavior.
> >
> > Also, we just added wal_level = minimal, which might end up being a poor
> > name choice of we want wal_level = off in PG 9.1. ?Perhaps we should
> > have used wal_level = crash_safe in 9.0.
> >
> > I have added the following TODO:
> >
> > ? ? ? ?Consider a non-crash-safe wal_level that eliminates WAL activity
> >
> > ? ? ? ? ? ?* http://archives.postgresql.org/pgsql-performance/2010-06/msg00300.php
>
> I don't think we need a system-wide setting for that. I believe that
> the unlogged tables I'm working on will handle that case.
Uh, will we have some global unlogged setting, like for the system
tables and stuff? It seems like an heavy burden to tell people they
have to create ever object as unlogged, and we would still generate log
for things like transaction commits.
--
Bruce Momjian <bruce@momjian.us> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ None of us is going to be here forever. +
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-23 20:43 Tom Lane <tgl@sss.pgh.pa.us>
parent: Dave Page <dpage@pgadmin.org>
0 siblings, 2 replies; 73+ messages in thread
From: Tom Lane @ 2010-06-23 20:43 UTC (permalink / raw)
To: Dave Page <dpage@pgadmin.org>; +Cc: Robert Haas <robertmhaas@gmail.com>; Bruce Momjian <bruce@momjian.us>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Dave Page <dpage@pgadmin.org> writes:
> On Wed, Jun 23, 2010 at 9:25 PM, Robert Haas <robertmhaas@gmail.com> wrote:
>> I don't think we need a system-wide setting for that. I believe that
>> the unlogged tables I'm working on will handle that case.
> Aren't they going to be truncated at startup? If the entire system is
> running without WAL, we would only need to do that in case of an
> unclean shutdown wouldn't we?
The problem with a system-wide no-WAL setting is it means you can't
trust the system catalogs after a crash. Which means you are forced to
use initdb to recover from any crash, in return for not a lot of savings
(for typical usages where there's not really much churn in the
catalogs). I tend to agree with Robert that a way to not log content
updates for individual user tables is likely to be much more useful in
practice.
regards, tom lane
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-23 20:45 Bruce Momjian <bruce@momjian.us>
parent: Tom Lane <tgl@sss.pgh.pa.us>
1 sibling, 0 replies; 73+ messages in thread
From: Bruce Momjian @ 2010-06-23 20:45 UTC (permalink / raw)
To: Tom Lane <tgl@sss.pgh.pa.us>; +Cc: Dave Page <dpage@pgadmin.org>; Robert Haas <robertmhaas@gmail.com>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Tom Lane wrote:
> Dave Page <dpage@pgadmin.org> writes:
> > On Wed, Jun 23, 2010 at 9:25 PM, Robert Haas <robertmhaas@gmail.com> wrote:
> >> I don't think we need a system-wide setting for that. I believe that
> >> the unlogged tables I'm working on will handle that case.
>
> > Aren't they going to be truncated at startup? If the entire system is
> > running without WAL, we would only need to do that in case of an
> > unclean shutdown wouldn't we?
>
> The problem with a system-wide no-WAL setting is it means you can't
> trust the system catalogs after a crash. Which means you are forced to
True, and in fact any postmaster crash could lead to curruption.
> use initdb to recover from any crash, in return for not a lot of savings
> (for typical usages where there's not really much churn in the
> catalogs). I tend to agree with Robert that a way to not log content
> updates for individual user tables is likely to be much more useful in
> practice.
OK, TODO removed.
--
Bruce Momjian <bruce@momjian.us> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ None of us is going to be here forever. +
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-24 08:25 Dimitri Fontaine <dfontaine@hi-media.com>
parent: Tom Lane <tgl@sss.pgh.pa.us>
1 sibling, 0 replies; 73+ messages in thread
From: Dimitri Fontaine @ 2010-06-24 08:25 UTC (permalink / raw)
To: Tom Lane <tgl@sss.pgh.pa.us>; +Cc: Dave Page <dpage@pgadmin.org>; Robert Haas <robertmhaas@gmail.com>; Bruce Momjian <bruce@momjian.us>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Tom Lane <tgl@sss.pgh.pa.us> writes:
> The problem with a system-wide no-WAL setting is it means you can't
> trust the system catalogs after a crash. Which means you are forced to
> use initdb to recover from any crash, in return for not a lot of savings
> (for typical usages where there's not really much churn in the
> catalogs).
What about having a "catalog only" WAL setting, userset ?
I'm not yet clear on the point but it well seems that the per
transaction WAL setting is impossible because of catalogs (meaning
mainly DDL support), but I can see us enforcing durability and crash
safety there.
That would probably mean that setting WAL level this low yet doing any
kind of DDL would need to be either an ERROR, or better yet, a WARNING
telling that the WAL level can not be that low so has been raised by the
system.
Regards,
--
dim
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-24 08:40 Rob Wultsch <wultsch@gmail.com>
parent: Josh Berkus <josh@agliodbs.com>
0 siblings, 1 reply; 73+ messages in thread
From: Rob Wultsch @ 2010-06-24 08:40 UTC (permalink / raw)
To: Josh Berkus <josh@agliodbs.com>; +Cc: Pierre C <lists@peufeu.com>; pgsql-performance
On Fri, Jun 18, 2010 at 1:55 PM, Josh Berkus <josh@agliodbs.com> wrote:
>
>> It must be a setting, not a version.
>>
>> For instance suppose you have a session table for your website and a
>> users table.
>>
>> - Having ACID on the users table is of course a must ;
>> - for the sessions table you can drop the "D"
>
> You're trying to solve a different use-case than the one I am.
>
> Your use-case will be solved by global temporary tables. I suggest that
> you give Robert Haas some help & feedback on that.
>
> My use case is people using PostgreSQL as a cache, or relying entirely
> on replication for durability.
>
> --
> -- Josh Berkus
> PostgreSQL Experts Inc.
> http://www.pgexperts.com
>
Is he? Wouldn't a global temporary table have content that is not
visible between db connections? A db session many not be the same as a
user session.
--
Rob Wultsch
wultsch@gmail.com
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-24 11:35 Robert Haas <robertmhaas@gmail.com>
parent: Rob Wultsch <wultsch@gmail.com>
0 siblings, 1 reply; 73+ messages in thread
From: Robert Haas @ 2010-06-24 11:35 UTC (permalink / raw)
To: Rob Wultsch <wultsch@gmail.com>; +Cc: Josh Berkus <josh@agliodbs.com>; Pierre C <lists@peufeu.com>; pgsql-performance
On Thu, Jun 24, 2010 at 4:40 AM, Rob Wultsch <wultsch@gmail.com> wrote:
> On Fri, Jun 18, 2010 at 1:55 PM, Josh Berkus <josh@agliodbs.com> wrote:
>>
>>> It must be a setting, not a version.
>>>
>>> For instance suppose you have a session table for your website and a
>>> users table.
>>>
>>> - Having ACID on the users table is of course a must ;
>>> - for the sessions table you can drop the "D"
>>
>> You're trying to solve a different use-case than the one I am.
>>
>> Your use-case will be solved by global temporary tables. I suggest that
>> you give Robert Haas some help & feedback on that.
>>
>> My use case is people using PostgreSQL as a cache, or relying entirely
>> on replication for durability.
>
> Is he? Wouldn't a global temporary table have content that is not
> visible between db connections? A db session many not be the same as a
> user session.
>
I'm planning to implement global temporary tables, which can have
different contents for each user session.
And I'm also planning to implement unlogged tables, which have the
same contents for all sessions but are not WAL-logged (and are
truncated on startup).
--
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise Postgres Company
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-24 18:56 Josh Berkus <josh@agliodbs.com>
parent: Robert Haas <robertmhaas@gmail.com>
0 siblings, 1 reply; 73+ messages in thread
From: Josh Berkus @ 2010-06-24 18:56 UTC (permalink / raw)
To: pgsql-performance
> And I'm also planning to implement unlogged tables, which have the
> same contents for all sessions but are not WAL-logged (and are
> truncated on startup).
Yep. And it's quite possible that this will be adequate for most users.
And it's also possible that the extra CPU which Robert isn't getting rid
of (bgwriter, checkpointing, etc.) does not have a measurable impact on
performance. At this point, my idea (which I call
"RunningWithScissorsDB") is only an idea for experimentation and
performance testing. It's pretty far off from being a TODO.
--
-- Josh Berkus
PostgreSQL Experts Inc.
http://www.pgexperts.com
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-24 19:14 Pavel Stehule <pavel.stehule@gmail.com>
parent: Josh Berkus <josh@agliodbs.com>
0 siblings, 2 replies; 73+ messages in thread
From: Pavel Stehule @ 2010-06-24 19:14 UTC (permalink / raw)
To: Josh Berkus <josh@agliodbs.com>; +Cc: pgsql-performance
2010/6/24 Josh Berkus <josh@agliodbs.com>:
>
>> And I'm also planning to implement unlogged tables, which have the
>> same contents for all sessions but are not WAL-logged (and are
>> truncated on startup).
this is similar MySQL's memory tables. Personally, I don't see any
practical sense do same work on PostgreSQL now, when memcached exists.
Much more important is smarter cache controlling then we have now -
maybe with priorities for some tables and some operations
(applications) - sometimes we don't need use cache for extra large
scans.
Regards
Pavel Stehule
>
> Yep. And it's quite possible that this will be adequate for most users.
>
> And it's also possible that the extra CPU which Robert isn't getting rid
> of (bgwriter, checkpointing, etc.) does not have a measurable impact on
> performance. At this point, my idea (which I call
> "RunningWithScissorsDB") is only an idea for experimentation and
> performance testing. It's pretty far off from being a TODO.
>
> --
> -- Josh Berkus
> PostgreSQL Experts Inc.
> http://www.pgexperts.com
>
> --
> Sent via pgsql-performance mailing list (pgsql-performance@postgresql.org)
> To make changes to your subscription:
> http://www.postgresql.org/mailpref/pgsql-performance
>
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-24 19:47 Joshua D. Drake <jd@commandprompt.com>
parent: Pavel Stehule <pavel.stehule@gmail.com>
1 sibling, 1 reply; 73+ messages in thread
From: Joshua D. Drake @ 2010-06-24 19:47 UTC (permalink / raw)
To: Pavel Stehule <pavel.stehule@gmail.com>; +Cc: Josh Berkus <josh@agliodbs.com>; pgsql-performance
On Thu, 2010-06-24 at 21:14 +0200, Pavel Stehule wrote:
> 2010/6/24 Josh Berkus <josh@agliodbs.com>:
> >
> >> And I'm also planning to implement unlogged tables, which have the
> >> same contents for all sessions but are not WAL-logged (and are
> >> truncated on startup).
>
> this is similar MySQL's memory tables. Personally, I don't see any
> practical sense do same work on PostgreSQL now, when memcached exists.
Because memcache is yet another layer and increases overhead to the
application developers by adding yet another layer to work with. Non
logged tables would rock.
SELECT * FROM foo;
:D
JD
--
PostgreSQL.org Major Contributor
Command Prompt, Inc: http://www.commandprompt.com/ - 509.416.6579
Consulting, Training, Support, Custom Development, Engineering
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-24 20:01 Pavel Stehule <pavel.stehule@gmail.com>
parent: Joshua D. Drake <jd@commandprompt.com>
0 siblings, 1 reply; 73+ messages in thread
From: Pavel Stehule @ 2010-06-24 20:01 UTC (permalink / raw)
To: jd@commandprompt.com; +Cc: Josh Berkus <josh@agliodbs.com>; pgsql-performance
2010/6/24 Joshua D. Drake <jd@commandprompt.com>:
> On Thu, 2010-06-24 at 21:14 +0200, Pavel Stehule wrote:
>> 2010/6/24 Josh Berkus <josh@agliodbs.com>:
>> >
>> >> And I'm also planning to implement unlogged tables, which have the
>> >> same contents for all sessions but are not WAL-logged (and are
>> >> truncated on startup).
>>
>> this is similar MySQL's memory tables. Personally, I don't see any
>> practical sense do same work on PostgreSQL now, when memcached exists.
>
> Because memcache is yet another layer and increases overhead to the
> application developers by adding yet another layer to work with. Non
> logged tables would rock.
I see only one positive point - it can help to people with broken
design application with migration to PostgreSQL.
There are different interesting feature - cached procedure's results
like Oracle 11. - it's more general.
only idea.
For me memory tables are nonsens, but what about memory cached
materialised views (maybe periodically refreshed)?
Regards
Pavel
>
> SELECT * FROM foo;
>
> :D
:)
>
> JD
>
>
>
>
> --
> PostgreSQL.org Major Contributor
> Command Prompt, Inc: http://www.commandprompt.com/ - 509.416.6579
> Consulting, Training, Support, Custom Development, Engineering
>
>
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-24 20:38 A.M. <agentm@themactionfaction.com>
parent: Pavel Stehule <pavel.stehule@gmail.com>
0 siblings, 1 reply; 73+ messages in thread
From: A.M. @ 2010-06-24 20:38 UTC (permalink / raw)
To: pgsql-performance
On Jun 24, 2010, at 4:01 PM, Pavel Stehule wrote:
> 2010/6/24 Joshua D. Drake <jd@commandprompt.com>:
>> On Thu, 2010-06-24 at 21:14 +0200, Pavel Stehule wrote:
>>> 2010/6/24 Josh Berkus <josh@agliodbs.com>:
>>>>
>>>>> And I'm also planning to implement unlogged tables, which have the
>>>>> same contents for all sessions but are not WAL-logged (and are
>>>>> truncated on startup).
>>>
>>> this is similar MySQL's memory tables. Personally, I don't see any
>>> practical sense do same work on PostgreSQL now, when memcached exists.
>>
>> Because memcache is yet another layer and increases overhead to the
>> application developers by adding yet another layer to work with. Non
>> logged tables would rock.
>
> I see only one positive point - it can help to people with broken
> design application with migration to PostgreSQL.
The broken design is being required to work around PostgreSQL's lack of this optimization.
>
> There are different interesting feature - cached procedure's results
> like Oracle 11. - it's more general.
>
> only idea.
>
> For me memory tables are nonsens, but what about memory cached
> materialised views (maybe periodically refreshed)?
Non-WAL-logged, non-fsynced tables are not equivalent to MySQL "memory tables". Such tables simply contain transient information. One can already make "memory tables" in PostgreSQL by making a tablespace in a tmpfs partition.
I have been eagerly waiting for this feature for six years so that I can write proper queries against ever-changing session data with transactional semantics (which memcached cannot offer). The only restriction I see for these transient data tables is that they cannot be referenced by standard tables using foreign key constraints. Otherwise, these tables behave like any other. That's the benefit.
Cheers,
M
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-24 21:33 Pavel Stehule <pavel.stehule@gmail.com>
parent: A.M. <agentm@themactionfaction.com>
0 siblings, 0 replies; 73+ messages in thread
From: Pavel Stehule @ 2010-06-24 21:33 UTC (permalink / raw)
To: A.M. <agentm@themactionfaction.com>; +Cc: pgsql-performance
2010/6/24 A.M. <agentm@themactionfaction.com>:
>
> On Jun 24, 2010, at 4:01 PM, Pavel Stehule wrote:
>
>> 2010/6/24 Joshua D. Drake <jd@commandprompt.com>:
>>> On Thu, 2010-06-24 at 21:14 +0200, Pavel Stehule wrote:
>>>> 2010/6/24 Josh Berkus <josh@agliodbs.com>:
>>>>>
>>>>>> And I'm also planning to implement unlogged tables, which have the
>>>>>> same contents for all sessions but are not WAL-logged (and are
>>>>>> truncated on startup).
>>>>
>>>> this is similar MySQL's memory tables. Personally, I don't see any
>>>> practical sense do same work on PostgreSQL now, when memcached exists.
>>>
>>> Because memcache is yet another layer and increases overhead to the
>>> application developers by adding yet another layer to work with. Non
>>> logged tables would rock.
>>
>> I see only one positive point - it can help to people with broken
>> design application with migration to PostgreSQL.
>
> The broken design is being required to work around PostgreSQL's lack of this optimization.
>
>>
>> There are different interesting feature - cached procedure's results
>> like Oracle 11. - it's more general.
>>
>> only idea.
>>
>> For me memory tables are nonsens, but what about memory cached
>> materialised views (maybe periodically refreshed)?
>
> Non-WAL-logged, non-fsynced tables are not equivalent to MySQL "memory tables". Such tables simply contain transient information. One can already make "memory tables" in PostgreSQL by making a tablespace in a tmpfs partition.
>
> I have been eagerly waiting for this feature for six years so that I can write proper queries against ever-changing session data with transactional semantics (which memcached cannot offer). The only restriction I see for these transient data tables is that they cannot be referenced by standard tables using foreign key constraints. Otherwise, these tables behave like any other. That's the benefit.
>
if you remove WAL, then there are MVCC still - you have to do VACUUM,
you have to do ANALYZE, you have to thinking about indexes ...
Processing pipe for simple query is long too. The removing WAL doesn't
do memory database from Postgres. But You have to know best, what do
you do.
Regards
Pavel Stehule
p.s. maybe memcached is too simply for you - there are more NoSQL db
> Cheers,
> M
> --
> Sent via pgsql-performance mailing list (pgsql-performance@postgresql.org)
> To make changes to your subscription:
> http://www.postgresql.org/mailpref/pgsql-performance
>
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-24 21:37 Josh Berkus <josh@agliodbs.com>
parent: Pavel Stehule <pavel.stehule@gmail.com>
1 sibling, 1 reply; 73+ messages in thread
From: Josh Berkus @ 2010-06-24 21:37 UTC (permalink / raw)
To: pgsql-performance
> this is similar MySQL's memory tables. Personally, I don't see any
> practical sense do same work on PostgreSQL now, when memcached exists.
Thing is, if you only have one table (say, a sessions table) which you
don't want logged, you don't necessarily want to fire up a 2nd software
application just for that. Plus, recent testing seems to show that with
no logging, memcached isn't really faster than PG.
Also, like for asynch_commit, this is something where users are
currently turning off fsync. Any option where we can present users with
controlled, predictable data loss instead of random corruption is a good
one.
> Much more important is smarter cache controlling then we have now -
> maybe with priorities for some tables and some operations
> (applications) - sometimes we don't need use cache for extra large
> scans.
Well, that would be good *too*. You working on it? ;-)
--
-- Josh Berkus
PostgreSQL Experts Inc.
http://www.pgexperts.com
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-24 21:55 Pavel Stehule <pavel.stehule@gmail.com>
parent: Josh Berkus <josh@agliodbs.com>
0 siblings, 0 replies; 73+ messages in thread
From: Pavel Stehule @ 2010-06-24 21:55 UTC (permalink / raw)
To: Josh Berkus <josh@agliodbs.com>; +Cc: pgsql-performance
2010/6/24 Josh Berkus <josh@agliodbs.com>:
>
>> this is similar MySQL's memory tables. Personally, I don't see any
>> practical sense do same work on PostgreSQL now, when memcached exists.
>
> Thing is, if you only have one table (say, a sessions table) which you
> don't want logged, you don't necessarily want to fire up a 2nd software
> application just for that. Plus, recent testing seems to show that with
> no logging, memcached isn't really faster than PG.
sorry, I thinking some else. Not only WAL does significant overhead.
You need litlle bit more memory, much more processing time. With very
fast operations, the bottle neck will be in interprocess communication
- but it doesn't mean so pg isn't slower than memcached. I repeating
it again - there are no any universal tool for all tasks.
>
> Also, like for asynch_commit, this is something where users are
> currently turning off fsync. Any option where we can present users with
> controlled, predictable data loss instead of random corruption is a good
> one.
>
it isn't too simple. What about statistics? These are used in system table.
>> Much more important is smarter cache controlling then we have now -
>> maybe with priorities for some tables and some operations
>> (applications) - sometimes we don't need use cache for extra large
>> scans.
>
> Well, that would be good *too*. You working on it? ;-)
>
no - just I know about possible problems with memory control.
> --
> -- Josh Berkus
> PostgreSQL Experts Inc.
> http://www.pgexperts.com
>
> --
> Sent via pgsql-performance mailing list (pgsql-performance@postgresql.org)
> To make changes to your subscription:
> http://www.postgresql.org/mailpref/pgsql-performance
>
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-28 21:57 Bruce Momjian <bruce@momjian.us>
parent: Bruce Momjian <bruce@momjian.us>
0 siblings, 1 reply; 73+ messages in thread
From: Bruce Momjian @ 2010-06-28 21:57 UTC (permalink / raw)
To: Bruce Momjian <bruce@momjian.us>; +Cc: Tom Lane <tgl@sss.pgh.pa.us>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Bruce Momjian wrote:
> Tom Lane wrote:
> > Dimitri Fontaine <dfontaine@hi-media.com> writes:
> > > Josh Berkus <josh@agliodbs.com> writes:
> > >> a) Eliminate WAL logging entirely
> > >> b) Eliminate checkpointing
> > >> c) Turn off the background writer
> > >> d) Have PostgreSQL refuse to restart after a crash and instead call an
> > >> exteral script (for reprovisioning)
> >
> > > Well I guess I'd prefer a per-transaction setting, allowing to bypass
> > > WAL logging and checkpointing.
> >
> > Not going to happen; this is all or nothing.
> >
> > > Forcing the backend to care itself for
> > > writing the data I'm not sure is a good thing, but if you say so.
> >
> > Yeah, I think proposal (c) is likely to be a net loss.
> >
> > (a) and (d) are probably simple, if by "reprovisioning" you mean
> > "rm -rf $PGDATA; initdb". Point (b) will be a bit trickier because
> > there are various housekeeping activities tied into checkpoints.
> > I think you can't actually remove checkpoints altogether, just
> > skip the flush-dirty-pages part.
>
> Based on this thread, I have developed the following documentation patch
> that outlines the performance enhancements possible if durability is not
> required. The patch also documents that synchronous_commit = false has
> potential committed transaction loss from a database crash (as well as
> an OS crash).
Applied.
--
Bruce Momjian <bruce@momjian.us> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ None of us is going to be here forever. +
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-29 10:52 Robert Haas <robertmhaas@gmail.com>
parent: Bruce Momjian <bruce@momjian.us>
0 siblings, 1 reply; 73+ messages in thread
From: Robert Haas @ 2010-06-29 10:52 UTC (permalink / raw)
To: Bruce Momjian <bruce@momjian.us>; +Cc: Tom Lane <tgl@sss.pgh.pa.us>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
On Mon, Jun 28, 2010 at 5:57 PM, Bruce Momjian <bruce@momjian.us> wrote:
>> The patch also documents that synchronous_commit = false has
>> potential committed transaction loss from a database crash (as well as
>> an OS crash).
Is this actually true?
--
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise Postgres Company
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-29 13:32 Bruce Momjian <bruce@momjian.us>
parent: Robert Haas <robertmhaas@gmail.com>
0 siblings, 2 replies; 73+ messages in thread
From: Bruce Momjian @ 2010-06-29 13:32 UTC (permalink / raw)
To: Robert Haas <robertmhaas@gmail.com>; +Cc: Tom Lane <tgl@sss.pgh.pa.us>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Robert Haas wrote:
> On Mon, Jun 28, 2010 at 5:57 PM, Bruce Momjian <bruce@momjian.us> wrote:
> >> The patch also documents that synchronous_commit = false has
> >> potential committed transaction loss from a database crash (as well as
> >> an OS crash).
>
> Is this actually true?
I asked on IRC and was told it is true, and looking at the C code it
looks true. What synchronous_commit = false does is to delay writing
the wal buffers to disk and fsyncing them, not just fsync, which is
where the commit loss due to db process crash comes from.
--
Bruce Momjian <bruce@momjian.us> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ None of us is going to be here forever. +
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-29 14:14 Kevin Grittner <Kevin.Grittner@wicourts.gov>
parent: Bruce Momjian <bruce@momjian.us>
1 sibling, 0 replies; 73+ messages in thread
From: Kevin Grittner @ 2010-06-29 14:14 UTC (permalink / raw)
To: Robert Haas <robertmhaas@gmail.com>; Bruce Momjian <bruce@momjian.us>; +Cc: Josh Berkus <josh@agliodbs.com>; Dimitri Fontaine <dfontaine@hi-media.com>; pgsql-performance; Tom Lane <tgl@sss.pgh.pa.us>
Bruce Momjian <bruce@momjian.us> wrote:
> What synchronous_commit = false does is to delay writing
> the wal buffers to disk and fsyncing them, not just fsync
Ah, that answers the question Josh Berkus asked here:
http://archives.postgresql.org/pgsql-performance/2010-06/msg00285.php
(which is something I was wondering about, too.)
-Kevin
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-29 17:09 Robert Haas <robertmhaas@gmail.com>
parent: Bruce Momjian <bruce@momjian.us>
1 sibling, 1 reply; 73+ messages in thread
From: Robert Haas @ 2010-06-29 17:09 UTC (permalink / raw)
To: Bruce Momjian <bruce@momjian.us>; +Cc: Tom Lane <tgl@sss.pgh.pa.us>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
On Tue, Jun 29, 2010 at 9:32 AM, Bruce Momjian <bruce@momjian.us> wrote:
> Robert Haas wrote:
>> On Mon, Jun 28, 2010 at 5:57 PM, Bruce Momjian <bruce@momjian.us> wrote:
>> >> The patch also documents that synchronous_commit = false has
>> >> potential committed transaction loss from a database crash (as well as
>> >> an OS crash).
>>
>> Is this actually true?
>
> I asked on IRC and was told it is true, and looking at the C code it
> looks true. What synchronous_commit = false does is to delay writing
> the wal buffers to disk and fsyncing them, not just fsync, which is
> where the commit loss due to db process crash comes from.
Ah, I see. Thanks.
--
Robert Haas
EnterpriseDB: http://www.enterprisedb.com
The Enterprise Postgres Company
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-29 17:19 Bruce Momjian <bruce@momjian.us>
parent: Robert Haas <robertmhaas@gmail.com>
0 siblings, 1 reply; 73+ messages in thread
From: Bruce Momjian @ 2010-06-29 17:19 UTC (permalink / raw)
To: Robert Haas <robertmhaas@gmail.com>; +Cc: Tom Lane <tgl@sss.pgh.pa.us>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Robert Haas wrote:
> On Tue, Jun 29, 2010 at 9:32 AM, Bruce Momjian <bruce@momjian.us> wrote:
> > Robert Haas wrote:
> >> On Mon, Jun 28, 2010 at 5:57 PM, Bruce Momjian <bruce@momjian.us> wrote:
> >> >> The patch also documents that synchronous_commit = false has
> >> >> potential committed transaction loss from a database crash (as well as
> >> >> an OS crash).
> >>
> >> Is this actually true?
> >
> > I asked on IRC and was told it is true, and looking at the C code it
> > looks true. ?What synchronous_commit = false does is to delay writing
> > the wal buffers to disk and fsyncing them, not just fsync, which is
> > where the commit loss due to db process crash comes from.
>
> Ah, I see. Thanks.
I am personally surprised it was designed that way; I thought we would
just delay fsync.
--
Bruce Momjian <bruce@momjian.us> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ None of us is going to be here forever. +
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-29 17:27 Tom Lane <tgl@sss.pgh.pa.us>
parent: Bruce Momjian <bruce@momjian.us>
0 siblings, 1 reply; 73+ messages in thread
From: Tom Lane @ 2010-06-29 17:27 UTC (permalink / raw)
To: Bruce Momjian <bruce@momjian.us>; +Cc: Robert Haas <robertmhaas@gmail.com>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Bruce Momjian <bruce@momjian.us> writes:
>>> I asked on IRC and was told it is true, and looking at the C code it
>>> looks true. ?What synchronous_commit = false does is to delay writing
>>> the wal buffers to disk and fsyncing them, not just fsync, which is
>>> where the commit loss due to db process crash comes from.
>> Ah, I see. Thanks.
> I am personally surprised it was designed that way; I thought we would
> just delay fsync.
That would require writing and syncing to be separable actions. If
you're using O_SYNC or similar, they aren't.
regards, tom lane
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-29 18:45 Bruce Momjian <bruce@momjian.us>
parent: Tom Lane <tgl@sss.pgh.pa.us>
0 siblings, 1 reply; 73+ messages in thread
From: Bruce Momjian @ 2010-06-29 18:45 UTC (permalink / raw)
To: Tom Lane <tgl@sss.pgh.pa.us>; +Cc: Robert Haas <robertmhaas@gmail.com>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Tom Lane wrote:
> Bruce Momjian <bruce@momjian.us> writes:
> >>> I asked on IRC and was told it is true, and looking at the C code it
> >>> looks true. ?What synchronous_commit = false does is to delay writing
> >>> the wal buffers to disk and fsyncing them, not just fsync, which is
> >>> where the commit loss due to db process crash comes from.
>
> >> Ah, I see. Thanks.
>
> > I am personally surprised it was designed that way; I thought we would
> > just delay fsync.
>
> That would require writing and syncing to be separable actions. If
> you're using O_SYNC or similar, they aren't.
Ah, very good point. I have added a C comment to clarify why this is
the current behavior; attached and applied.
--
Bruce Momjian <bruce@momjian.us> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ None of us is going to be here forever. +
Attachments:
/rtmp/diff (text/x-diff, 1.5K) download
Index: src/backend/access/transam/xact.c
===================================================================
RCS file: /cvsroot/pgsql/src/backend/access/transam/xact.c,v
retrieving revision 1.291
diff -c -c -r1.291 xact.c
*** src/backend/access/transam/xact.c 13 May 2010 11:39:30 -0000 1.291
--- src/backend/access/transam/xact.c 29 Jun 2010 18:33:47 -0000
***************
*** 1028,1034 ****
if (XactSyncCommit || forceSyncCommit || haveNonTemp)
{
/*
! * Synchronous commit case.
*
* Sleep before flush! So we can flush more than one commit records
* per single fsync. (The idea is some other backend may do the
--- 1028,1034 ----
if (XactSyncCommit || forceSyncCommit || haveNonTemp)
{
/*
! * Synchronous commit case:
*
* Sleep before flush! So we can flush more than one commit records
* per single fsync. (The idea is some other backend may do the
***************
*** 1054,1060 ****
else
{
/*
! * Asynchronous commit case.
*
* Report the latest async commit LSN, so that the WAL writer knows to
* flush this commit.
--- 1054,1065 ----
else
{
/*
! * Asynchronous commit case:
! *
! * This enables possible committed transaction loss in the case of a
! * postmaster crash because WAL buffers are left unwritten.
! * Ideally we could issue the WAL write without the fsync, but
! * some wal_sync_methods do not allow separate write/fsync.
*
* Report the latest async commit LSN, so that the WAL writer knows to
* flush this commit.
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-30 00:48 Jignesh Shah <jkshah@gmail.com>
parent: Bruce Momjian <bruce@momjian.us>
0 siblings, 1 reply; 73+ messages in thread
From: Jignesh Shah @ 2010-06-30 00:48 UTC (permalink / raw)
To: Bruce Momjian <bruce@momjian.us>; +Cc: Tom Lane <tgl@sss.pgh.pa.us>; Robert Haas <robertmhaas@gmail.com>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
On Tue, Jun 29, 2010 at 2:45 PM, Bruce Momjian <bruce@momjian.us> wrote:
> Tom Lane wrote:
>> Bruce Momjian <bruce@momjian.us> writes:
>> >>> I asked on IRC and was told it is true, and looking at the C code it
>> >>> looks true. ?What synchronous_commit = false does is to delay writing
>> >>> the wal buffers to disk and fsyncing them, not just fsync, which is
>> >>> where the commit loss due to db process crash comes from.
>>
>> >> Ah, I see. Thanks.
>>
>> > I am personally surprised it was designed that way; I thought we would
>> > just delay fsync.
>>
>> That would require writing and syncing to be separable actions. If
>> you're using O_SYNC or similar, they aren't.
>
> Ah, very good point. I have added a C comment to clarify why this is
> the current behavior; attached and applied.
>
> --
> Bruce Momjian <bruce@momjian.us> http://momjian.us
> EnterpriseDB http://enterprisedb.com
Though has anybody seen a behaviour where synchronous_commit=off is
slower than synchronous_commit=on ? Again there are two cases here
one with O_* flag and other with f*sync flags. But I had seen that
behavior with PostgreSQL 9.0 beta(2 I think) though havent really
investigated it much yet .. (though now I dont remember which
wal_sync_method flag) . Just curious if anybody has seen that
behavior..
Regards,
Jignesh
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-30 01:39 Bruce Momjian <bruce@momjian.us>
parent: Jignesh Shah <jkshah@gmail.com>
0 siblings, 2 replies; 73+ messages in thread
From: Bruce Momjian @ 2010-06-30 01:39 UTC (permalink / raw)
To: Jignesh Shah <jkshah@gmail.com>; +Cc: Tom Lane <tgl@sss.pgh.pa.us>; Robert Haas <robertmhaas@gmail.com>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Jignesh Shah wrote:
> On Tue, Jun 29, 2010 at 2:45 PM, Bruce Momjian <bruce@momjian.us> wrote:
> > Tom Lane wrote:
> >> Bruce Momjian <bruce@momjian.us> writes:
> >> >>> I asked on IRC and was told it is true, and looking at the C code it
> >> >>> looks true. ?What synchronous_commit = false does is to delay writing
> >> >>> the wal buffers to disk and fsyncing them, not just fsync, which is
> >> >>> where the commit loss due to db process crash comes from.
> >>
> >> >> Ah, I see. ?Thanks.
> >>
> >> > I am personally surprised it was designed that way; ?I thought we would
> >> > just delay fsync.
> >>
> >> That would require writing and syncing to be separable actions. ?If
> >> you're using O_SYNC or similar, they aren't.
> >
> > Ah, very good point. ?I have added a C comment to clarify why this is
> > the current behavior; ?attached and applied.
> >
> > --
> > ?Bruce Momjian ?<bruce@momjian.us> ? ? ? ?http://momjian.us
> > ?EnterpriseDB ? ? ? ? ? ? ? ? ? ? ? ? ? ? http://enterprisedb.com
>
>
> Though has anybody seen a behaviour where synchronous_commit=off is
> slower than synchronous_commit=on ? Again there are two cases here
> one with O_* flag and other with f*sync flags. But I had seen that
> behavior with PostgreSQL 9.0 beta(2 I think) though havent really
> investigated it much yet .. (though now I dont remember which
> wal_sync_method flag) . Just curious if anybody has seen that
> behavior..
I have trouble believing how synchronous_commit=off could be slower than
'on'.
--
Bruce Momjian <bruce@momjian.us> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ None of us is going to be here forever. +
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-30 14:30 Brad Nicholson <bnichols@ca.afilias.info>
parent: Bruce Momjian <bruce@momjian.us>
1 sibling, 1 reply; 73+ messages in thread
From: Brad Nicholson @ 2010-06-30 14:30 UTC (permalink / raw)
To: Bruce Momjian <bruce@momjian.us>; +Cc: Jignesh Shah <jkshah@gmail.com>; Tom Lane <tgl@sss.pgh.pa.us>; Robert Haas <robertmhaas@gmail.com>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
On Tue, 2010-06-29 at 21:39 -0400, Bruce Momjian wrote:
> Jignesh Shah wrote:
> > On Tue, Jun 29, 2010 at 2:45 PM, Bruce Momjian <bruce@momjian.us> wrote:
> > > Tom Lane wrote:
> > >> Bruce Momjian <bruce@momjian.us> writes:
> > >> >>> I asked on IRC and was told it is true, and looking at the C code it
> > >> >>> looks true. ?What synchronous_commit = false does is to delay writing
> > >> >>> the wal buffers to disk and fsyncing them, not just fsync, which is
> > >> >>> where the commit loss due to db process crash comes from.
> > >>
> > >> >> Ah, I see. ?Thanks.
> > >>
> > >> > I am personally surprised it was designed that way; ?I thought we would
> > >> > just delay fsync.
> > >>
> > >> That would require writing and syncing to be separable actions. ?If
> > >> you're using O_SYNC or similar, they aren't.
> > >
> > > Ah, very good point. ?I have added a C comment to clarify why this is
> > > the current behavior; ?attached and applied.
> > >
> > > --
> > > ?Bruce Momjian ?<bruce@momjian.us> ? ? ? ?http://momjian.us
> > > ?EnterpriseDB ? ? ? ? ? ? ? ? ? ? ? ? ? ? http://enterprisedb.com
> >
> >
> > Though has anybody seen a behaviour where synchronous_commit=off is
> > slower than synchronous_commit=on ? Again there are two cases here
> > one with O_* flag and other with f*sync flags. But I had seen that
> > behavior with PostgreSQL 9.0 beta(2 I think) though havent really
> > investigated it much yet .. (though now I dont remember which
> > wal_sync_method flag) . Just curious if anybody has seen that
> > behavior..
>
> I have trouble believing how synchronous_commit=off could be slower than
> 'on'.
>
I wonder if it could be contention on wal buffers?
Say I've turned synchronous_commit off, I drive enough traffic fill up
my wal_buffers. I assume that we would have to start writing buffers
down to disk before allocating to the new process.
--
Brad Nicholson 416-673-4106
Database Administrator, Afilias Canada Corp.
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-30 15:45 Bruce Momjian <bruce@momjian.us>
parent: Brad Nicholson <bnichols@ca.afilias.info>
0 siblings, 0 replies; 73+ messages in thread
From: Bruce Momjian @ 2010-06-30 15:45 UTC (permalink / raw)
To: Brad Nicholson <bnichols@ca.afilias.info>; +Cc: Jignesh Shah <jkshah@gmail.com>; Tom Lane <tgl@sss.pgh.pa.us>; Robert Haas <robertmhaas@gmail.com>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
Brad Nicholson wrote:
> > > > Ah, very good point. ?I have added a C comment to clarify why this is
> > > > the current behavior; ?attached and applied.
> > > >
> > > > --
> > > > ?Bruce Momjian ?<bruce@momjian.us> ? ? ? ?http://momjian.us
> > > > ?EnterpriseDB ? ? ? ? ? ? ? ? ? ? ? ? ? ? http://enterprisedb.com
> > >
> > >
> > > Though has anybody seen a behaviour where synchronous_commit=off is
> > > slower than synchronous_commit=on ? Again there are two cases here
> > > one with O_* flag and other with f*sync flags. But I had seen that
> > > behavior with PostgreSQL 9.0 beta(2 I think) though havent really
> > > investigated it much yet .. (though now I dont remember which
> > > wal_sync_method flag) . Just curious if anybody has seen that
> > > behavior..
> >
> > I have trouble believing how synchronous_commit=off could be slower than
> > 'on'.
> >
>
> I wonder if it could be contention on wal buffers?
>
> Say I've turned synchronous_commit off, I drive enough traffic fill up
> my wal_buffers. I assume that we would have to start writing buffers
> down to disk before allocating to the new process.
Uh, good question. I know this report showed ynchronous_commit=off as
faster than 'on':
http://archives.postgresql.org/pgsql-performance/2010-06/msg00277.php
--
Bruce Momjian <bruce@momjian.us> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ None of us is going to be here forever. +
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-30 16:42 Dave Crooke <dcrooke@gmail.com>
parent: jgardner@jonathangardner.net <jgardner@jonathangardner.net>
2 siblings, 1 reply; 73+ messages in thread
From: Dave Crooke @ 2010-06-30 16:42 UTC (permalink / raw)
To: jgardner@jonathangardner.net <jgardner@jonathangardner.net>; +Cc: pgsql-performance
I haven't jumped in yet on this thread, but here goes ....
If you're really looking for query performance, then any database which is
designed with reliability and ACID consistency in mind is going to
inherently have some mis-fit features.
Some other ideas to consider, depending on your query mix:
1. MySQL with the MyISAM database (non-ACID)
2. Put an in-application generic query cache in front of the DB, that runs
in the app address space, e.g. Cache' if using Java
3. Using a DB is a good way to get generic querying capability, but if the
"where" clause in the querying is over a small set of meta-data, and SQL
syntax is not a big requirement, consider non-RDBMS alternatives, e.g. use
XPath over a W3C DOM object tree to get primary keys to in-memory hash
tables (possibly distributed with something like memcached)
On Mon, Jun 14, 2010 at 9:14 PM, jgardner@jonathangardner.net <
jgardner@jonathangardner.net> wrote:
> We have a fairly unique need for a local, in-memory cache. This will
> store data aggregated from other sources. Generating the data only
> takes a few minutes, and it is updated often. There will be some
> fairly expensive queries of arbitrary complexity run at a fairly high
> rate. We're looking for high concurrency and reasonable performance
> throughout.
>
> The entire data set is roughly 20 MB in size. We've tried Carbonado in
> front of SleepycatJE only to discover that it chokes at a fairly low
> concurrency and that Carbonado's rule-based optimizer is wholly
> insufficient for our needs. We've also tried Carbonado's Map
> Repository which suffers the same problems.
>
> I've since moved the backend database to a local PostgreSQL instance
> hoping to take advantage of PostgreSQL's superior performance at high
> concurrency. Of course, at the default settings, it performs quite
> poorly compares to the Map Repository and Sleepycat JE.
>
> My question is how can I configure the database to run as quickly as
> possible if I don't care about data consistency or durability? That
> is, the data is updated so often and it can be reproduced fairly
> rapidly so that if there is a server crash or random particles from
> space mess up memory we'd just restart the machine and move on.
>
> I've never configured PostgreSQL to work like this and I thought maybe
> someone here had some ideas on a good approach to this.
>
> --
> Sent via pgsql-performance mailing list (pgsql-performance@postgresql.org)
> To make changes to your subscription:
> http://www.postgresql.org/mailpref/pgsql-performance
>
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-30 17:06 Craig James <craig_james@emolecules.com>
parent: Dave Crooke <dcrooke@gmail.com>
0 siblings, 0 replies; 73+ messages in thread
From: Craig James @ 2010-06-30 17:06 UTC (permalink / raw)
To: pgsql-performance
On 6/30/10 9:42 AM, Dave Crooke wrote:
> I haven't jumped in yet on this thread, but here goes ....
>
> If you're really looking for query performance, then any database which
> is designed with reliability and ACID consistency in mind is going to
> inherently have some mis-fit features.
>
> Some other ideas to consider, depending on your query mix:
>
> 1. MySQL with the MyISAM database (non-ACID)
>
> 2. Put an in-application generic query cache in front of the DB, that
> runs in the app address space, e.g. Cache' if using Java
>
> 3. Using a DB is a good way to get generic querying capability, but if
> the "where" clause in the querying is over a small set of meta-data, and
> SQL syntax is not a big requirement, consider non-RDBMS alternatives,
> e.g. use XPath over a W3C DOM object tree to get primary keys to
> in-memory hash tables (possibly distributed with something like memcached)
These would be good suggestions if the "throwaway" database was the only one. But in real life, these throwaway databases are built from other databases that are NOT throwaway, where the data matters and ACID is critical. In other words, they'll probably need Postgres anyway.
Sure, you could use both Postgres and MySQL/ISAM, but that means installing and maintaining both, plus building all of the other application layers to work on both systems.
Craig
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-06-30 18:21 Jignesh Shah <jkshah@gmail.com>
parent: Bruce Momjian <bruce@momjian.us>
1 sibling, 1 reply; 73+ messages in thread
From: Jignesh Shah @ 2010-06-30 18:21 UTC (permalink / raw)
To: Bruce Momjian <bruce@momjian.us>; +Cc: Tom Lane <tgl@sss.pgh.pa.us>; Robert Haas <robertmhaas@gmail.com>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
On Tue, Jun 29, 2010 at 9:39 PM, Bruce Momjian <bruce@momjian.us> wrote:
> Jignesh Shah wrote:
>> On Tue, Jun 29, 2010 at 2:45 PM, Bruce Momjian <bruce@momjian.us> wrote:
>> > Tom Lane wrote:
>> >> Bruce Momjian <bruce@momjian.us> writes:
>> >> >>> I asked on IRC and was told it is true, and looking at the C code it
>> >> >>> looks true. ?What synchronous_commit = false does is to delay writing
>> >> >>> the wal buffers to disk and fsyncing them, not just fsync, which is
>> >> >>> where the commit loss due to db process crash comes from.
>> >>
>> >> >> Ah, I see. ?Thanks.
>> >>
>> >> > I am personally surprised it was designed that way; ?I thought we would
>> >> > just delay fsync.
>> >>
>> >> That would require writing and syncing to be separable actions. ?If
>> >> you're using O_SYNC or similar, they aren't.
>> >
>> > Ah, very good point. ?I have added a C comment to clarify why this is
>> > the current behavior; ?attached and applied.
>> >
>> > --
>> > ?Bruce Momjian ?<bruce@momjian.us> ? ? ? ?http://momjian.us
>> > ?EnterpriseDB ? ? ? ? ? ? ? ? ? ? ? ? ? ? http://enterprisedb.com
>>
>>
>> Though has anybody seen a behaviour where synchronous_commit=off is
>> slower than synchronous_commit=on ? Again there are two cases here
>> one with O_* flag and other with f*sync flags. But I had seen that
>> behavior with PostgreSQL 9.0 beta(2 I think) though havent really
>> investigated it much yet .. (though now I dont remember which
>> wal_sync_method flag) . Just curious if anybody has seen that
>> behavior..
>
> I have trouble believing how synchronous_commit=off could be slower than
> 'on'.
>
> --
> Bruce Momjian <bruce@momjian.us> http://momjian.us
> EnterpriseDB http://enterprisedb.com
>
> + None of us is going to be here forever. +
>
Hi Bruce,
Let me clarify the problem a bit.. If the underlying WAL disk is SSD
then it seems I can get synchronous_commit=on to work faster than
synchronous_commit=off.. Yes sounds unintuitive to me. But the results
seems to point in that direction. It could be that it hit some other
bottleneck with synchronous_commit=off reaches that
synchronous_commit=on does not hit (or has not hit yet).
Brads point of wal buffers could be valid. Though typically I havent
seen the need to increase it beyond 1024kB yet.
Hopefully I will retry it with the latest PostgreSQL 9.0 bits and see
it happens again.
More on that later.
Regards,
Jignesh
^ permalink raw reply [nested|flat] 73+ messages in thread
* Re: PostgreSQL as a local in-memory cache
@ 2010-07-01 10:00 Greg Smith <greg@2ndquadrant.com>
parent: Jignesh Shah <jkshah@gmail.com>
0 siblings, 0 replies; 73+ messages in thread
From: Greg Smith @ 2010-07-01 10:00 UTC (permalink / raw)
To: Jignesh Shah <jkshah@gmail.com>; +Cc: Bruce Momjian <bruce@momjian.us>; Tom Lane <tgl@sss.pgh.pa.us>; Robert Haas <robertmhaas@gmail.com>; Dimitri Fontaine <dfontaine@hi-media.com>; Josh Berkus <josh@agliodbs.com>; pgsql-performance
On 6/30/2010 2:21 PM, Jignesh Shah wrote:
> If the underlying WAL disk is SSD then it seems I can get
> synchronous_commit=on to work faster than
> synchronous_commit=off..
The first explanation that pops to mind is that synchronous_commit is
writing all the time, which doesn't have the same sort of penalty on
SSD. Whereas if you turn it off, then there are some idle periods where
the SSD could be writing usefully, but instead it's buffering for the
next burst instead. The importance of that can be magnified on
operating systems that do their own buffering and tend to lag behind
writes until they see an fsync call, like is the case on Linux with ext3.
^ permalink raw reply [nested|flat] 73+ messages in thread
end of thread, other threads:[~2010-07-01 10:00 UTC | newest]
Thread overview: 73+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2010-06-15 02:14 PostgreSQL as a local in-memory cache jgardner@jonathangardner.net <jgardner@jonathangardner.net>
2010-06-15 15:47 ` Chris Browne <cbbrowne@acm.org>
2010-06-15 16:02 ` Steve Wampler <swampler@noao.edu>
2010-06-15 17:12 ` Craig James <craig_james@emolecules.com>
2010-06-15 17:37 ` Chris Browne <cbbrowne@acm.org>
2010-06-15 23:09 ` Jaime Casanova <jaime@2ndquadrant.com>
2010-06-15 23:18 ` Josh Berkus <josh@agliodbs.com>
2010-06-16 06:30 ` jgardner@jonathangardner.net <jgardner@jonathangardner.net>
2010-06-16 07:48 ` Mark Kirkwood <mark.kirkwood@catalyst.net.nz>
2010-06-16 07:51 ` Pierre C <lists@peufeu.com>
2010-06-16 19:11 ` Jonathan Gardner <jgardner@jonathangardner.net>
2010-06-16 07:53 ` Pierre C <lists@peufeu.com>
2010-06-16 08:27 ` Greg Smith <greg@2ndquadrant.com>
2010-06-16 11:22 ` Pierre C <lists@peufeu.com>
2010-06-16 19:17 ` Jonathan Gardner <jgardner@jonathangardner.net>
2010-06-16 20:40 ` Pierre C <lists@peufeu.com>
2010-06-16 19:22 ` Jonathan Gardner <jgardner@jonathangardner.net>
2010-06-16 17:37 ` Alvaro Herrera <alvherre@commandprompt.com>
2010-06-16 19:00 ` Josh Berkus <josh@agliodbs.com>
2010-06-16 19:19 ` Jonathan Gardner <jgardner@jonathangardner.net>
2010-06-16 19:33 ` Balkrishna Sharma <b_ki@hotmail.com>
2010-06-16 19:36 ` Craig James <craig_james@emolecules.com>
2010-06-15 16:49 ` jgardner@jonathangardner.net <jgardner@jonathangardner.net>
2010-06-17 02:33 ` jgardner@jonathangardner.net <jgardner@jonathangardner.net>
2010-06-17 17:29 ` Josh Berkus <josh@agliodbs.com>
2010-06-17 18:44 ` Pierre C <lists@peufeu.com>
2010-06-17 19:01 ` Dimitri Fontaine <dfontaine@hi-media.com>
2010-06-17 19:38 ` Tom Lane <tgl@sss.pgh.pa.us>
2010-06-23 19:37 ` Bruce Momjian <bruce@momjian.us>
2010-06-23 19:51 ` Pavel Stehule <pavel.stehule@gmail.com>
2010-06-23 20:16 ` Bruce Momjian <bruce@momjian.us>
2010-06-23 20:25 ` Robert Haas <robertmhaas@gmail.com>
2010-06-23 20:27 ` Dave Page <dpage@pgadmin.org>
2010-06-23 20:43 ` Tom Lane <tgl@sss.pgh.pa.us>
2010-06-23 20:45 ` Bruce Momjian <bruce@momjian.us>
2010-06-24 08:25 ` Dimitri Fontaine <dfontaine@hi-media.com>
2010-06-23 20:27 ` Bruce Momjian <bruce@momjian.us>
2010-06-23 19:40 ` Bruce Momjian <bruce@momjian.us>
2010-06-28 21:57 ` Bruce Momjian <bruce@momjian.us>
2010-06-29 10:52 ` Robert Haas <robertmhaas@gmail.com>
2010-06-29 13:32 ` Bruce Momjian <bruce@momjian.us>
2010-06-29 14:14 ` Kevin Grittner <Kevin.Grittner@wicourts.gov>
2010-06-29 17:09 ` Robert Haas <robertmhaas@gmail.com>
2010-06-29 17:19 ` Bruce Momjian <bruce@momjian.us>
2010-06-29 17:27 ` Tom Lane <tgl@sss.pgh.pa.us>
2010-06-29 18:45 ` Bruce Momjian <bruce@momjian.us>
2010-06-30 00:48 ` Jignesh Shah <jkshah@gmail.com>
2010-06-30 01:39 ` Bruce Momjian <bruce@momjian.us>
2010-06-30 14:30 ` Brad Nicholson <bnichols@ca.afilias.info>
2010-06-30 15:45 ` Bruce Momjian <bruce@momjian.us>
2010-06-30 18:21 ` Jignesh Shah <jkshah@gmail.com>
2010-07-01 10:00 ` Greg Smith <greg@2ndquadrant.com>
2010-06-17 20:12 ` Pierre C <lists@peufeu.com>
2010-06-18 09:15 ` Matthew Wakeling <matthew@flymine.org>
2010-06-18 09:40 ` Pierre C <lists@peufeu.com>
2010-06-18 20:55 ` Josh Berkus <josh@agliodbs.com>
2010-06-24 08:40 ` Rob Wultsch <wultsch@gmail.com>
2010-06-24 11:35 ` Robert Haas <robertmhaas@gmail.com>
2010-06-24 18:56 ` Josh Berkus <josh@agliodbs.com>
2010-06-24 19:14 ` Pavel Stehule <pavel.stehule@gmail.com>
2010-06-24 19:47 ` Joshua D. Drake <jd@commandprompt.com>
2010-06-24 20:01 ` Pavel Stehule <pavel.stehule@gmail.com>
2010-06-24 20:38 ` A.M. <agentm@themactionfaction.com>
2010-06-24 21:33 ` Pavel Stehule <pavel.stehule@gmail.com>
2010-06-24 21:37 ` Josh Berkus <josh@agliodbs.com>
2010-06-24 21:55 ` Pavel Stehule <pavel.stehule@gmail.com>
2010-06-18 20:56 ` Josh Berkus <josh@agliodbs.com>
2010-06-17 23:01 ` Josh Berkus <josh@agliodbs.com>
2010-06-17 23:25 ` Tom Lane <tgl@sss.pgh.pa.us>
2010-06-17 19:59 ` Greg Smith <greg@2ndquadrant.com>
2010-06-21 22:14 ` Robert Haas <robertmhaas@gmail.com>
2010-06-30 16:42 ` Dave Crooke <dcrooke@gmail.com>
2010-06-30 17:06 ` Craig James <craig_james@emolecules.com>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox