pg.ddx.io pgsql-performance@postgresql.org mailing list archive
help / color / mirror / Atom feedIndex use in BETWEEN statement...
8+ messages / 5 participants
[nested] [flat]
* Index use in BETWEEN statement...
@ 2005-09-23 22:03 Cristian Prieto <cristian@clickdiario.com>
0 siblings, 1 reply; 8+ messages in thread
From: Cristian Prieto @ 2005-09-23 22:03 UTC (permalink / raw)
To: pgsql-performance
Hello pals, I have the following table in Postgresql 8.0.1
Mydb# \d geoip_block
Table "public.geoip_block"
Column | Type | Modifiers
-------------+--------+-----------
locid | bigint |
start_block | inet |
end_block | inet |
mydb# explain analyze select locid from geoip_block where
'216.230.158.50'::inet between start_block and end_block;
QUERY PLAN
----------------------------------------------------------------------------
-------------------------------------------
Seq Scan on geoip_block (cost=0.00..142772.86 rows=709688 width=8) (actual
time=14045.384..14706.927 rows=1 loops=1)
Filter: (('216.230.158.50'::inet >= start_block) AND
('216.230.158.50'::inet <= end_block))
Total runtime: 14707.038 ms
Ok, now I decided to create a index to "speed" a little the query
Mydb# create index idx_ipblocks on geoip_block(start_block, end_block);
CREATE INDEX
clickad=# explain analyze select locid from geoip_block where
'216.230.158.50'::inet between start_block and end_block;
QUERY PLAN
----------------------------------------------------------------------------
------------------------------------------
Seq Scan on geoip_block (cost=0.00..78033.96 rows=230141 width=8) (actual
time=12107.919..12610.199 rows=1 loops=1)
Filter: (('216.230.158.50'::inet >= start_block) AND
('216.230.158.50'::inet <= end_block))
Total runtime: 12610.329 ms
(3 rows)
I guess the planner is doing a sequential scan in the table, why not use the
compound index? Do you have any idea in how to speed up this query?
Thanks a lot!
^ permalink raw reply [nested|flat] 8+ messages in thread
* Index use in BETWEEN statement...
@ 2005-09-26 15:26 Cristian Prieto <cristian@clickdiario.com>
parent: Cristian Prieto <cristian@clickdiario.com>
0 siblings, 1 reply; 8+ messages in thread
From: Cristian Prieto @ 2005-09-26 15:26 UTC (permalink / raw)
To: pgsql-general@postgresql.org
Hello pals, I have the following table in Postgresql 8.0.1
Mydb# \d geoip_block
Table "public.geoip_block"
Column | Type | Modifiers
-------------+--------+-----------
locid | bigint |
start_block | inet |
end_block | inet |
mydb# explain analyze select locid from geoip_block where
'216.230.158.50'::inet between start_block and end_block;
QUERY PLAN
----------------------------------------------------------------------------
-------------------------------------------
Seq Scan on geoip_block (cost=0.00..142772.86 rows=709688 width=8) (actual
time=14045.384..14706.927 rows=1 loops=1)
Filter: (('216.230.158.50'::inet >= start_block) AND
('216.230.158.50'::inet <= end_block))
Total runtime: 14707.038 ms
Ok, now I decided to create a index to "speed" a little the query
Mydb# create index idx_ipblocks on geoip_block(start_block, end_block);
CREATE INDEX
clickad=# explain analyze select locid from geoip_block where
'216.230.158.50'::inet between start_block and end_block;
QUERY PLAN
----------------------------------------------------------------------------
------------------------------------------
Seq Scan on geoip_block (cost=0.00..78033.96 rows=230141 width=8) (actual
time=12107.919..12610.199 rows=1 loops=1)
Filter: (('216.230.158.50'::inet >= start_block) AND
('216.230.158.50'::inet <= end_block))
Total runtime: 12610.329 ms
(3 rows)
I guess the planner is doing a sequential scan in the table, why not use the
compound index? Do you have any idea in how to speed up this query?
Thanks a lot!
^ permalink raw reply [nested|flat] 8+ messages in thread
* Re: Index use in BETWEEN statement...
@ 2005-09-26 16:24 Sean Davis <sdavis2@mail.nih.gov>
parent: Cristian Prieto <cristian@clickdiario.com>
0 siblings, 1 reply; 8+ messages in thread
From: Sean Davis @ 2005-09-26 16:24 UTC (permalink / raw)
To: Cristian Prieto <cristian@clickdiario.com>; pgsql-general@postgresql.org
On 9/26/05 11:26 AM, "Cristian Prieto" <cristian@clickdiario.com> wrote:
>
> Hello pals, I have the following table in Postgresql 8.0.1
>
> Mydb# \d geoip_block
> Table "public.geoip_block"
> Column | Type | Modifiers
> -------------+--------+-----------
> locid | bigint |
> start_block | inet |
> end_block | inet |
>
> mydb# explain analyze select locid from geoip_block where
> '216.230.158.50'::inet between start_block and end_block;
> QUERY PLAN
> ----------------------------------------------------------------------------
> -------------------------------------------
> Seq Scan on geoip_block (cost=0.00..142772.86 rows=709688 width=8) (actual
> time=14045.384..14706.927 rows=1 loops=1)
> Filter: (('216.230.158.50'::inet >= start_block) AND
> ('216.230.158.50'::inet <= end_block))
> Total runtime: 14707.038 ms
>
> Ok, now I decided to create a index to "speed" a little the query
>
> Mydb# create index idx_ipblocks on geoip_block(start_block, end_block);
> CREATE INDEX
>
> clickad=# explain analyze select locid from geoip_block where
> '216.230.158.50'::inet between start_block and end_block;
> QUERY PLAN
> ----------------------------------------------------------------------------
> ------------------------------------------
> Seq Scan on geoip_block (cost=0.00..78033.96 rows=230141 width=8) (actual
> time=12107.919..12610.199 rows=1 loops=1)
> Filter: (('216.230.158.50'::inet >= start_block) AND
> ('216.230.158.50'::inet <= end_block))
> Total runtime: 12610.329 ms
> (3 rows)
>
> I guess the planner is doing a sequential scan in the table, why not use the
> compound index? Do you have any idea in how to speed up this query?
Did you vacuum analyze the table after creating the index?
Sean
^ permalink raw reply [nested|flat] 8+ messages in thread
* Re: Index use in BETWEEN statement...
@ 2005-09-26 17:49 Cristian Prieto <cristian@clickdiario.com>
parent: Sean Davis <sdavis2@mail.nih.gov>
0 siblings, 2 replies; 8+ messages in thread
From: Cristian Prieto @ 2005-09-26 17:49 UTC (permalink / raw)
To: 'Sean Davis' <sdavis2@mail.nih.gov>; pgsql-general@postgresql.org; pgsql-performance
mydb=# explain analyze select locid from geoip_block where
'216.230.158.50'::inet between start_block and end_block;
QUERY PLAN
----------------------------------------------------------------------------
------------------------------------------
Seq Scan on geoip_block (cost=0.00..78033.96 rows=230141 width=8) (actual
time=13015.538..13508.708 rows=1 loops=1)
Filter: (('216.230.158.50'::inet >= start_block) AND
('216.230.158.50'::inet <= end_block))
Total runtime: 13508.905 ms
(3 rows)
mydb=# alter table geoip_block add constraint pkey_geoip_block primary key
(start_block, end_block);
NOTICE: ALTER TABLE / ADD PRIMARY KEY will create implicit index
"pkey_geoip_block" for table "geoip_block"
ALTER TABLE
mydb=# vacuum analyze geoip_block;
mydb=# explain analyze select locid from geoip_block where
'216.230.158.50'::inet between start_block and end_block;
QUERY PLAN
----------------------------------------------------------------------------
-------------------------------------------
Seq Scan on geoip_block (cost=0.00..101121.01 rows=308324 width=8) (actual
time=12128.190..12631.550 rows=1 loops=1)
Filter: (('216.230.158.50'::inet >= start_block) AND
('216.230.158.50'::inet <= end_block))
Total runtime: 12631.679 ms
(3 rows)
mydb=#
As you see it still using a sequential scan in the table and ignores the
index, any other suggestion?
-----Original Message-----
From: pgsql-general-owner@postgresql.org
[mailto:pgsql-general-owner@postgresql.org] On Behalf Of Sean Davis
Sent: Lunes, 26 de Septiembre de 2005 10:24 a.m.
To: Cristian Prieto; pgsql-general@postgresql.org
Subject: Re: [GENERAL] Index use in BETWEEN statement...
On 9/26/05 11:26 AM, "Cristian Prieto" <cristian@clickdiario.com> wrote:
>
> Hello pals, I have the following table in Postgresql 8.0.1
>
> Mydb# \d geoip_block
> Table "public.geoip_block"
> Column | Type | Modifiers
> -------------+--------+-----------
> locid | bigint |
> start_block | inet |
> end_block | inet |
>
> mydb# explain analyze select locid from geoip_block where
> '216.230.158.50'::inet between start_block and end_block;
> QUERY PLAN
>
----------------------------------------------------------------------------
> -------------------------------------------
> Seq Scan on geoip_block (cost=0.00..142772.86 rows=709688 width=8)
(actual
> time=14045.384..14706.927 rows=1 loops=1)
> Filter: (('216.230.158.50'::inet >= start_block) AND
> ('216.230.158.50'::inet <= end_block))
> Total runtime: 14707.038 ms
>
> Ok, now I decided to create a index to "speed" a little the query
>
> Mydb# create index idx_ipblocks on geoip_block(start_block, end_block);
> CREATE INDEX
>
> clickad=# explain analyze select locid from geoip_block where
> '216.230.158.50'::inet between start_block and end_block;
> QUERY PLAN
>
----------------------------------------------------------------------------
> ------------------------------------------
> Seq Scan on geoip_block (cost=0.00..78033.96 rows=230141 width=8) (actual
> time=12107.919..12610.199 rows=1 loops=1)
> Filter: (('216.230.158.50'::inet >= start_block) AND
> ('216.230.158.50'::inet <= end_block))
> Total runtime: 12610.329 ms
> (3 rows)
>
> I guess the planner is doing a sequential scan in the table, why not use
the
> compound index? Do you have any idea in how to speed up this query?
Did you vacuum analyze the table after creating the index?
Sean
---------------------------(end of broadcast)---------------------------
TIP 3: Have you checked our extensive FAQ?
http://www.postgresql.org/docs/faq
^ permalink raw reply [nested|flat] 8+ messages in thread
* Re: Index use in BETWEEN statement...
@ 2005-09-26 19:17 Tom Lane <tgl@sss.pgh.pa.us>
parent: Cristian Prieto <cristian@clickdiario.com>
1 sibling, 1 reply; 8+ messages in thread
From: Tom Lane @ 2005-09-26 19:17 UTC (permalink / raw)
To: Cristian Prieto <cristian@clickdiario.com>; +Cc: 'Sean Davis' <sdavis2@mail.nih.gov>; pgsql-general@postgresql.org; pgsql-performance
"Cristian Prieto" <cristian@clickdiario.com> writes:
> mydb=# explain analyze select locid from geoip_block where
> '216.230.158.50'::inet between start_block and end_block;
> As you see it still using a sequential scan in the table and ignores the
> index, any other suggestion?
That two-column index is entirely useless for this query; in fact btree
indexes of any sort are pretty useless. You really need some sort of
multidimensional index type like rtree or gist. There was discussion
just a week or three ago of how to optimize searches for intervals
overlapping a specified point, which is identical to your problem.
Can't remember if the question was about timestamp intervals or plain
intervals, but try checking the list archives.
regards, tom lane
^ permalink raw reply [nested|flat] 8+ messages in thread
* Re: Index use in BETWEEN statement...
@ 2005-09-26 19:44 Don Isgitt <djisgitt@soundenergy.com>
parent: Cristian Prieto <cristian@clickdiario.com>
1 sibling, 0 replies; 8+ messages in thread
From: Don Isgitt @ 2005-09-26 19:44 UTC (permalink / raw)
To: Cristian Prieto <cristian@clickdiario.com>; +Cc: Sean Davis <sdavis2@mail.nih.gov>; pgsql-general@postgresql.org; pgsql-performance
Cristian Prieto wrote:
>mydb=# explain analyze select locid from geoip_block where
>'216.230.158.50'::inet between start_block and end_block;
> QUERY PLAN
>----------------------------------------------------------------------------
>------------------------------------------
> Seq Scan on geoip_block (cost=0.00..78033.96 rows=230141 width=8) (actual
>time=13015.538..13508.708 rows=1 loops=1)
> Filter: (('216.230.158.50'::inet >= start_block) AND
>('216.230.158.50'::inet <= end_block))
> Total runtime: 13508.905 ms
>(3 rows)
>
>mydb=# alter table geoip_block add constraint pkey_geoip_block primary key
>(start_block, end_block);
>NOTICE: ALTER TABLE / ADD PRIMARY KEY will create implicit index
>"pkey_geoip_block" for table "geoip_block"
>ALTER TABLE
>
>mydb=# vacuum analyze geoip_block;
>
>mydb=# explain analyze select locid from geoip_block where
>'216.230.158.50'::inet between start_block and end_block;
> QUERY PLAN
>----------------------------------------------------------------------------
>-------------------------------------------
> Seq Scan on geoip_block (cost=0.00..101121.01 rows=308324 width=8) (actual
>time=12128.190..12631.550 rows=1 loops=1)
> Filter: (('216.230.158.50'::inet >= start_block) AND
>('216.230.158.50'::inet <= end_block))
> Total runtime: 12631.679 ms
>(3 rows)
>
>mydb=#
>
>
>As you see it still using a sequential scan in the table and ignores the
>index, any other suggestion?
>
>Cristian,
>
>
Please note that the planner thinks 308324 rows are being returned,
while there is actually only 1 (one!). You might try altering statistics
for the relevant column(s), analyzing the table, and then try again. If
that doesn't give you a more accurate row estimate, though, it won't help.
Don
^ permalink raw reply [nested|flat] 8+ messages in thread
* Re: Index use in BETWEEN statement...
@ 2005-09-27 10:54 Sean Davis <sdavis2@mail.nih.gov>
parent: Yonatan Ben-Nes <da@canaan.co.il>
0 siblings, 0 replies; 8+ messages in thread
From: Sean Davis @ 2005-09-27 10:54 UTC (permalink / raw)
To: Yonatan Ben-Nes <da@canaan.co.il>; Tom Lane <tgl@sss.pgh.pa.us>; +Cc: Cristian Prieto <cristian@clickdiario.com>; pgsql-general@postgresql.org; pgsql-performance
On 9/27/05 7:45 AM, "Yonatan Ben-Nes" <da@canaan.co.il> wrote:
> Tom Lane wrote:
>> "Cristian Prieto" <cristian@clickdiario.com> writes:
>>
>>> mydb=# explain analyze select locid from geoip_block where
>>> '216.230.158.50'::inet between start_block and end_block;
>>
>>
>>> As you see it still using a sequential scan in the table and ignores the
>>> index, any other suggestion?
>>
>>
>> That two-column index is entirely useless for this query; in fact btree
>> indexes of any sort are pretty useless. You really need some sort of
>> multidimensional index type like rtree or gist. There was discussion
>> just a week or three ago of how to optimize searches for intervals
>> overlapping a specified point, which is identical to your problem.
>> Can't remember if the question was about timestamp intervals or plain
>> intervals, but try checking the list archives.
>>
>> regards, tom lane
>>
>> ---------------------------(end of broadcast)---------------------------
>> TIP 4: Have you searched our list archives?
>>
>> http://archives.postgresql.org
>
> I think that Tom is talking about a discussion which I started entitled
> "Planner create a slow plan without an available index" search for it
> maybe it will help you.
> At the end I created an RTREE index and it did solved my problem though
> my data was 2 INT fields and not INET fields as yours so im not sure how
> can you work with that... To solve my problem I created boxes from the 2
> numbers and with them I did overlapping.
There is some code in this thread that shows the box approach explicitly:
http://archives.postgresql.org/pgsql-sql/2005-09/msg00189.php
Sean
^ permalink raw reply [nested|flat] 8+ messages in thread
* Re: Index use in BETWEEN statement...
@ 2005-09-27 11:45 Yonatan Ben-Nes <da@canaan.co.il>
parent: Tom Lane <tgl@sss.pgh.pa.us>
0 siblings, 1 reply; 8+ messages in thread
From: Yonatan Ben-Nes @ 2005-09-27 11:45 UTC (permalink / raw)
To: Tom Lane <tgl@sss.pgh.pa.us>; +Cc: Cristian Prieto <cristian@clickdiario.com>; Sean Davis <sdavis2@mail.nih.gov>; pgsql-general@postgresql.org; pgsql-performance
Tom Lane wrote:
> "Cristian Prieto" <cristian@clickdiario.com> writes:
>
>>mydb=# explain analyze select locid from geoip_block where
>>'216.230.158.50'::inet between start_block and end_block;
>
>
>>As you see it still using a sequential scan in the table and ignores the
>>index, any other suggestion?
>
>
> That two-column index is entirely useless for this query; in fact btree
> indexes of any sort are pretty useless. You really need some sort of
> multidimensional index type like rtree or gist. There was discussion
> just a week or three ago of how to optimize searches for intervals
> overlapping a specified point, which is identical to your problem.
> Can't remember if the question was about timestamp intervals or plain
> intervals, but try checking the list archives.
>
> regards, tom lane
>
> ---------------------------(end of broadcast)---------------------------
> TIP 4: Have you searched our list archives?
>
> http://archives.postgresql.org
I think that Tom is talking about a discussion which I started entitled
"Planner create a slow plan without an available index" search for it
maybe it will help you.
At the end I created an RTREE index and it did solved my problem though
my data was 2 INT fields and not INET fields as yours so im not sure how
can you work with that... To solve my problem I created boxes from the 2
numbers and with them I did overlapping.
^ permalink raw reply [nested|flat] 8+ messages in thread
end of thread, other threads:[~2005-09-27 11:45 UTC | newest]
Thread overview: 8+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2005-09-23 22:03 Index use in BETWEEN statement... Cristian Prieto <cristian@clickdiario.com>
2005-09-26 15:26 ` Cristian Prieto <cristian@clickdiario.com>
2005-09-26 16:24 ` Sean Davis <sdavis2@mail.nih.gov>
2005-09-26 17:49 ` Cristian Prieto <cristian@clickdiario.com>
2005-09-26 19:17 ` Tom Lane <tgl@sss.pgh.pa.us>
2005-09-27 11:45 ` Yonatan Ben-Nes <da@canaan.co.il>
2005-09-27 10:54 ` Sean Davis <sdavis2@mail.nih.gov>
2005-09-26 19:44 ` Don Isgitt <djisgitt@soundenergy.com>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox