pg.ddx.io pgsql-php@postgresql.org mailing list archive
help / color / mirror / Atom feedRe: Creating md5 passwords in PHP for the PostgreSQL pg_shadow table
5+ messages / 2 participants
[nested] [flat]
* Re: Creating md5 passwords in PHP for the PostgreSQL pg_shadow table
@ 1970-01-01 00:00 Fery@mik.co.id
0 siblings, 1 reply; 5+ messages in thread
From: Fery@mik.co.id @ 1970-01-01 00:00 UTC (permalink / raw)
To: Matthew Horoschun <mhoroschun@canprint.com.au>; +Cc: busby@pnts.com; pgsql-php; pgsql-php-owner@postgresql.org
Dear All,
When I do CREATE USER [user] WITH PASSWORD 'password'
why the encryption didn't work ? I saw in the pg_shadow table look like as
i set the password ?
SELECT * FROM PG_SHADOW
in password field will shown : 'password' ??????
Is there any way to activate md5 encryption in PostgreSQL ? or It was done
by compiling it when first installation ????
thankss
Best Regards,
Fery Gideon
IT Specialist
PT. Mitra Integrasi Komputindo
ASPAC Kuningan - 8th floor, Suite 805
Jl. H.R. Rasuna Said Kav. X-2 No. 4, Jakarta 12950
Phone: (62-21) 522-8322(ext 102), Fax: (62-21) 522-8321
e-mail: fery@mik.co.id
Matthew Horoschun
<mhoroschun@canprint To: "David Busby" <busby@pnts.com>
.com.au> cc: pgsql-php@postgresql.org
Sent by: Subject: Re: [PHP] Creating md5 passwords in PHP for the PostgreSQL
pgsql-php-owner@post pg_shadow table
gresql.org
01/21/2003 05:10 AM
Hi David,
Thanks for the reply.
Unfortunately, thats not quite the problem. I want to create passwords
that will work in the pg_shadow table. So, I need them to be calculated
in exactly the same way PostgreSQL does when you do a CREATE USER
matthew WITH PASSWORD testing.
For example, If I create a user in PostgreSQL called 'matthew' with
password 'testing', I get pg_shadow entry with passwd:
md5759af56ffaf865413f7a50b4fae20ea3
but, if I do a simple md5 of 'testing' like you've done below, I get:
ae2b1fca515949e5d54fb22b8ed95575
As you can see, those don't match.
Perhaps I'm missing something though?
Cheers
Matthew.
On Tuesday, January 21, 2003, at 05:27 AM, David Busby wrote:
> Matthew,
> I just use something like
> $pass = $_POST['pass'];
> $e_pass = md5($passs);
> Maybe not as secure as two md5s, but have you ever tried to
> reverse one
> md5 checksum?
--
Matthew Horoschun
Network Administrator
CanPrint Communications Pty. Ltd.
Mobile: 0417 282 378
Direct: (02) 6295 4544
Telephone: (02) 6295 4422
Facsimile: (02) 6295 4473
---------------------------(end of broadcast)---------------------------
TIP 2: you can get off all lists at once with the unregister command
(send "unregister YourEmailAddressHere" to majordomo@postgresql.org)
^ permalink raw reply [nested|flat] 5+ messages in thread
* Creating md5 passwords in PHP for the PostgreSQL pg_shadow table
@ 2003-01-20 11:37 Matthew Horoschun <mhoroschun@canprint.com.au>
0 siblings, 0 replies; 5+ messages in thread
From: Matthew Horoschun @ 2003-01-20 11:37 UTC (permalink / raw)
To: pgsql-php
Hi All,
I want to be able to allow non-superusers the ability to create other
PostgreSQL users in limited circumstances. My plan was to create a
dummy table with rules that actually made changes to the pg_shadow
table.
Therefore I need to be able to create password entries in the pg_shadow
table. From browsing the code and the mailing lists I'm pretty certain
I need to do the following in PHP to create a MD5 password for
PostgreSQL:
$passwd = "md5" . md5( md5( $password . $username ) . $salt );
Has anybody done this before? Is this the right way to get the md5?...
and if so... how do I get PostgreSQL to give me the salt?
Thanks in advance for any assistance!
Cheers
Matthew.
--
Matthew Horoschun
Network Administrator
CanPrint Communications Pty. Ltd.
Mobile: 0417 282 378
Direct: (02) 6295 4544
Telephone: (02) 6295 4422
Facsimile: (02) 6295 4473
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Creating md5 passwords in PHP for the PostgreSQL pg_shadow table
@ 2003-01-20 22:10 Matthew Horoschun <mhoroschun@canprint.com.au>
0 siblings, 0 replies; 5+ messages in thread
From: Matthew Horoschun @ 2003-01-20 22:10 UTC (permalink / raw)
To: David Busby <busby@pnts.com>; +Cc: pgsql-php
Hi David,
Thanks for the reply.
Unfortunately, thats not quite the problem. I want to create passwords
that will work in the pg_shadow table. So, I need them to be calculated
in exactly the same way PostgreSQL does when you do a CREATE USER
matthew WITH PASSWORD testing.
For example, If I create a user in PostgreSQL called 'matthew' with
password 'testing', I get pg_shadow entry with passwd:
md5759af56ffaf865413f7a50b4fae20ea3
but, if I do a simple md5 of 'testing' like you've done below, I get:
ae2b1fca515949e5d54fb22b8ed95575
As you can see, those don't match.
Perhaps I'm missing something though?
Cheers
Matthew.
On Tuesday, January 21, 2003, at 05:27 AM, David Busby wrote:
> Matthew,
> I just use something like
> $pass = $_POST['pass'];
> $e_pass = md5($passs);
> Maybe not as secure as two md5s, but have you ever tried to
> reverse one
> md5 checksum?
--
Matthew Horoschun
Network Administrator
CanPrint Communications Pty. Ltd.
Mobile: 0417 282 378
Direct: (02) 6295 4544
Telephone: (02) 6295 4422
Facsimile: (02) 6295 4473
^ permalink raw reply [nested|flat] 5+ messages in thread
* Fwd: Creating md5 passwords in PHP for the PostgreSQL pg_shadow table
@ 2003-01-21 00:14 Matthew Horoschun <mhoroschun@canprint.com.au>
0 siblings, 0 replies; 5+ messages in thread
From: Matthew Horoschun @ 2003-01-21 00:14 UTC (permalink / raw)
To: pgsql-php
Hi All,
I've figured this out myself... but I thought I might just let the list
archives know so that others don't need to work it out for themselves.
To create a md5 password suitable for use in the PostgreSQL pg_shadow
table:
$md5_passwd = 'md5' . md5( $password . $username );
The username acts as salt.
Matthew.
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Creating md5 passwords in PHP for the PostgreSQL pg_shadow table
@ 2003-01-21 03:30 Matthew Horoschun <mhoroschun@canprint.com.au>
parent: Fery@mik.co.id
0 siblings, 0 replies; 5+ messages in thread
From: Matthew Horoschun @ 2003-01-21 03:30 UTC (permalink / raw)
To: Fery@mik.co.id; +Cc: pgsql-php
Hi Fery,
Try
password_encryption = true
in postgresql.conf
(In my build it appears to be on by default).
Matthew.
On Wednesday, January 22, 2003, at 01:51 PM, Fery@mik.co.id wrote:
> Is there any way to activate md5 encryption in PostgreSQL ? or It was
> done
> by compiling it when first installation ????
^ permalink raw reply [nested|flat] 5+ messages in thread
end of thread, other threads:[~2003-01-21 03:30 UTC | newest]
Thread overview: 5+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
1970-01-01 00:00 Re: Creating md5 passwords in PHP for the PostgreSQL pg_shadow table Fery@mik.co.id
2003-01-21 03:30 ` Matthew Horoschun <mhoroschun@canprint.com.au>
2003-01-20 11:37 Creating md5 passwords in PHP for the PostgreSQL pg_shadow table Matthew Horoschun <mhoroschun@canprint.com.au>
2003-01-20 22:10 Re: Creating md5 passwords in PHP for the PostgreSQL pg_shadow table Matthew Horoschun <mhoroschun@canprint.com.au>
2003-01-21 00:14 Fwd: Creating md5 passwords in PHP for the PostgreSQL pg_shadow table Matthew Horoschun <mhoroschun@canprint.com.au>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox