pg.ddx.io pgsql-sql@postgresql.org mailing list archive
help / color / mirror / Atom feedTRANSACTIONS and TCP/IP
5+ messages / 4 participants
[nested] [flat]
* TRANSACTIONS and TCP/IP
@ 1999-12-16 00:38 Barry Baldwin <bbaldwin@indyme.com>
0 siblings, 3 replies; 5+ messages in thread
From: Barry Baldwin @ 1999-12-16 00:38 UTC (permalink / raw)
To: pgsql-sql
Hi,
I've got postgres 6.5.2 running on a Linux box and I'm developing a client
app in Delphi. The client sends SQL commands via TCP/IP.
I've tried starting a transaction by sending the BEGIN command and then I
update a table and then send a ROLLBACK command to try
and abort the transaction. It doesn't seem to be working. Even though I've
done a rollback the transaction still goes through.
When I start the transaction I get this message on the Linux box console
NOTICE: BeginTransactionBlock and not in default state
This indicates that there is a transaction already in process. I don't know
how that can be.
When I issue the rollback command I get this message
NOTICE: UserAbortTransactionBlock and not in in-progress state
This indicates that there is no transaction in progress. There sure should
be.
I tried all of the above in psql and it works fine. Is this something that
just won't work over a TCP/IP connection?
Any suggestions on how I can get transactions to work would be greatly
appreciated,
TIA,
Barry
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: [SQL] TRANSACTIONS and TCP/IP
@ 1999-12-16 03:42 Tom Lane <tgl@sss.pgh.pa.us>
parent: Barry Baldwin <bbaldwin@indyme.com>
2 siblings, 0 replies; 5+ messages in thread
From: Tom Lane @ 1999-12-16 03:42 UTC (permalink / raw)
To: Barry Baldwin <bbaldwin@indyme.com>; +Cc: pgsql-sql
Barry Baldwin <bbaldwin@indyme.com> writes:
> I've got postgres 6.5.2 running on a Linux box and I'm developing a client
> app in Delphi. The client sends SQL commands via TCP/IP.
> I've tried starting a transaction by sending the BEGIN command and then I
> update a table and then send a ROLLBACK command to try
> and abort the transaction. It doesn't seem to be working.
I don't know anything about Delphi, but it sure sounds like something
in the interface software you're using is sending BEGIN and COMMIT
commands for you. This feature is commonly called autocommit --- look
for documentation on how to turn it off.
> I tried all of the above in psql and it works fine. Is this something that
> just won't work over a TCP/IP connection?
No, connection type hasn't got anything to do with it...
regards, tom lane
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: [SQL] TRANSACTIONS and TCP/IP
@ 1999-12-16 07:04 George Moga <george@cicnet.ro>
parent: Barry Baldwin <bbaldwin@indyme.com>
2 siblings, 0 replies; 5+ messages in thread
From: George Moga @ 1999-12-16 07:04 UTC (permalink / raw)
To: Barry Baldwin <bbaldwin@indyme.com>; pgsql-sql
Barry Baldwin wrote:
> Hi,
>
> I've got postgres 6.5.2 running on a Linux box and I'm developing a client
> app in Delphi. The client sends SQL commands via TCP/IP.
> I've tried starting a transaction by sending the BEGIN command and then I
> update a table and then send a ROLLBACK command to try
> and abort the transaction. It doesn't seem to be working. Even though I've
> done a rollback the transaction still goes through.
>
> When I start the transaction I get this message on the Linux box console
> NOTICE: BeginTransactionBlock and not in default state
>
> This indicates that there is a transaction already in process. I don't know
> how that can be.
>
> When I issue the rollback command I get this message
> NOTICE: UserAbortTransactionBlock and not in in-progress state
>
> This indicates that there is no transaction in progress. There sure should
> be.
>
> I tried all of the above in psql and it works fine. Is this something that
> just won't work over a TCP/IP connection?
>
> Any suggestions on how I can get transactions to work would be greatly
> appreciated,
>
> TIA,
>
> Barry
>
> ************
I belive you use ODBC for conection. I never use PostgreSQL ODBC but in ACCESS
ODBC if you want to use transaction, you must use, before your transaction:
dbc set autocommit off
where dbc is your database conection. After you finishing your transaction:
dbc set autocommit on
I hope this help you!
Best regards,
George Moga,
george@cicnet.ro
P.S. Sorry for my english.
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: [SQL] TRANSACTIONS and TCP/IP
@ 1999-12-16 09:00 Vladimir Terziev <vlady@school.digsys.bg>
parent: Barry Baldwin <bbaldwin@indyme.com>
2 siblings, 0 replies; 5+ messages in thread
From: Vladimir Terziev @ 1999-12-16 09:00 UTC (permalink / raw)
To: Barry Baldwin <bbaldwin@indyme.com>; +Cc: pgsql-sql
What kind of connection you use?
Embeded SQL in your Delphi source ot ODBC?
Vladmir
On Wed, 15 Dec 1999, Barry Baldwin wrote:
> Hi,
>
> I've got postgres 6.5.2 running on a Linux box and I'm developing a client
> app in Delphi. The client sends SQL commands via TCP/IP.
> I've tried starting a transaction by sending the BEGIN command and then I
> update a table and then send a ROLLBACK command to try
> and abort the transaction. It doesn't seem to be working. Even though I've
> done a rollback the transaction still goes through.
>
> When I start the transaction I get this message on the Linux box console
> NOTICE: BeginTransactionBlock and not in default state
>
> This indicates that there is a transaction already in process. I don't know
> how that can be.
>
> When I issue the rollback command I get this message
> NOTICE: UserAbortTransactionBlock and not in in-progress state
>
> This indicates that there is no transaction in progress. There sure should
> be.
>
> I tried all of the above in psql and it works fine. Is this something that
> just won't work over a TCP/IP connection?
>
> Any suggestions on how I can get transactions to work would be greatly
> appreciated,
>
> TIA,
>
> Barry
>
>
>
> ************
>
>
^ permalink raw reply [nested|flat] 5+ messages in thread
* RE: [SQL] TRANSACTIONS and TCP/IP
@ 1999-12-16 18:37 Barry Baldwin <bbaldwin@indyme.com>
0 siblings, 0 replies; 5+ messages in thread
From: Barry Baldwin @ 1999-12-16 18:37 UTC (permalink / raw)
To: pgsql-sql
Hi,
I would like to thank everyone for their responses. I was able to get it
working by using the
various suggestions I received. I had to turn off the ODBC drivers
autocommit and then
I could use the Tdatabase types' StartTransaction, Commit and RollBack
methods.
Thanks again everybody,
Barry
Barry Baldwin wrote:
> Hi,
>
> I've got postgres 6.5.2 running on a Linux box and I'm developing a client
> app in Delphi. The client sends SQL commands via TCP/IP.
> I've tried starting a transaction by sending the BEGIN command and then I
> update a table and then send a ROLLBACK command to try
> and abort the transaction. It doesn't seem to be working. Even though
I've
> done a rollback the transaction still goes through.
>
> When I start the transaction I get this message on the Linux box console
> NOTICE: BeginTransactionBlock and not in default state
>
> This indicates that there is a transaction already in process. I don't
know
> how that can be.
>
> When I issue the rollback command I get this message
> NOTICE: UserAbortTransactionBlock and not in in-progress state
>
> This indicates that there is no transaction in progress. There sure
should
> be.
>
> I tried all of the above in psql and it works fine. Is this something
that
> just won't work over a TCP/IP connection?
>
> Any suggestions on how I can get transactions to work would be greatly
> appreciated,
>
> TIA,
>
> Barry
>
> ************
^ permalink raw reply [nested|flat] 5+ messages in thread
end of thread, other threads:[~1999-12-16 18:37 UTC | newest]
Thread overview: 5+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
1999-12-16 00:38 TRANSACTIONS and TCP/IP Barry Baldwin <bbaldwin@indyme.com>
1999-12-16 03:42 ` Tom Lane <tgl@sss.pgh.pa.us>
1999-12-16 07:04 ` George Moga <george@cicnet.ro>
1999-12-16 09:00 ` Vladimir Terziev <vlady@school.digsys.bg>
1999-12-16 18:37 RE: [SQL] TRANSACTIONS and TCP/IP Barry Baldwin <bbaldwin@indyme.com>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox