pg.ddx.io pgsql-sql@postgresql.org mailing list archive
help / color / mirror / Atom feedLooking for the correct solution for a generic problem.
5+ messages / 4 participants
[nested] [flat]
* Looking for the correct solution for a generic problem.
@ 2002-02-07 20:52 Frank Joerdens <frank@joerdens.de>
2002-02-07 20:53 ` Re: Looking for the correct solution for a generic problem. Mark Nielsen <python@kepnet.net>
2002-02-07 21:31 ` Re: Looking for the correct solution for a generic problem. Stephan Szabo <sszabo@megazone23.bigpanda.com>
2002-02-07 21:50 ` Re: Looking for the correct solution for a generic problem. Tom Lane <tgl@sss.pgh.pa.us>
0 siblings, 3 replies; 5+ messages in thread
From: Frank Joerdens @ 2002-02-07 20:52 UTC (permalink / raw)
To: pgsql-sql; +Cc: hank@fas-art.com; annette@fas-art.com
I've been wondering about this for quite a while now. And I suspect
there is a bog-standard way that is better than the rather clumsy
approach I am following now (it feels clumsy anyway). I've got table B
which is linked to table A as in
CREATE TABLE A (
id serial,
foo text,
);
CREATE TABLE B (
a_id int references A (id),
id serial,
bar text
);
Now I want to retrieve rows from A as in
SELECT DISTINCT A.foo
FROM A,B
WHERE A.foo [matches some criteria]
OR B.bar [matches some other criteria]
AND A.id = B.a_id;
This works fine if there is *at least* one row in B for each row in A.
If there isn't, I obviously get 0 results even if the column foo in A
matches the desired criteria. But I do want the rows from A even if
there is no row in B that is linked to those rows in A that match the
criteria. If the column bar in B matches the desired criteria, I also
want the rows in A that are linked to those rows in B.
The solution I am using now is to create a 'dummy' row in B for each row
in A on the application level, which I then filter out of the result
sets again (B gets an extra 'dummy' column which is set to true, if
applicable).
I not only suspect that there is a proper way to do this, but that there
is ample discussion in the relevant literature . . . if I only knew
under which keyword to look it up . . .
Regards, Frank
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Looking for the correct solution for a generic problem.
2002-02-07 20:52 Looking for the correct solution for a generic problem. Frank Joerdens <frank@joerdens.de>
@ 2002-02-07 20:53 ` Mark Nielsen <python@kepnet.net>
2 siblings, 0 replies; 5+ messages in thread
From: Mark Nielsen @ 2002-02-07 20:53 UTC (permalink / raw)
To: pgsql-sql
Frank Joerdens wrote:
> I've been wondering about this for quite a while now. And I suspect
> there is a bog-standard way that is better than the rather clumsy
> approach I am following now (it feels clumsy anyway). I've got table B
> which is linked to table A as in
>
> CREATE TABLE A (
> id serial,
> foo text,
> );
>
> CREATE TABLE B (
> a_id int references A (id),
> id serial,
> bar text
> );
>
> Now I want to retrieve rows from A as in
>
> SELECT DISTINCT A.foo
> FROM A,B
> WHERE A.foo [matches some criteria]
> OR B.bar [matches some other criteria]
> AND A.id = B.a_id;
>
Perhaps I am clueless, but wouldn't you want to do this
SELECT DISTINCT A.foo
FROM A,B
WHERE ((A.foo =1)
OR (B.bar =2))
AND A.id = B.a_id;
Actually, I think the outerjoin is right.
I had problems like this in the past. I think the other posts answer it.
Mark
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Looking for the correct solution for a generic problem.
2002-02-07 20:52 Looking for the correct solution for a generic problem. Frank Joerdens <frank@joerdens.de>
@ 2002-02-07 21:31 ` Stephan Szabo <sszabo@megazone23.bigpanda.com>
2002-02-07 22:04 ` Re: Looking for the correct solution for a generic problem. Frank Joerdens <frank@joerdens.de>
2 siblings, 1 reply; 5+ messages in thread
From: Stephan Szabo @ 2002-02-07 21:31 UTC (permalink / raw)
To: Frank Joerdens <frank@joerdens.de>; +Cc: pgsql-sql; hank@fas-art.com; annette@fas-art.com
On Thu, 7 Feb 2002, Frank Joerdens wrote:
> Now I want to retrieve rows from A as in
>
> SELECT DISTINCT A.foo
> FROM A,B
> WHERE A.foo [matches some criteria]
> OR B.bar [matches some other criteria]
> AND A.id = B.a_id;
>
> This works fine if there is *at least* one row in B for each row in A.
> If there isn't, I obviously get 0 results even if the column foo in A
> matches the desired criteria. But I do want the rows from A even if
> there is no row in B that is linked to those rows in A that match the
> criteria. If the column bar in B matches the desired criteria, I also
> want the rows in A that are linked to those rows in B.
Sounds like you want a left outer join.
Maybe...
select distinct a.foo from
a left outer join b on (a.ID = b.a_id)
where a.foo [matches] or B.bar [matches]
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Looking for the correct solution for a generic problem.
2002-02-07 20:52 Looking for the correct solution for a generic problem. Frank Joerdens <frank@joerdens.de>
2002-02-07 21:31 ` Re: Looking for the correct solution for a generic problem. Stephan Szabo <sszabo@megazone23.bigpanda.com>
@ 2002-02-07 22:04 ` Frank Joerdens <frank@joerdens.de>
0 siblings, 0 replies; 5+ messages in thread
From: Frank Joerdens @ 2002-02-07 22:04 UTC (permalink / raw)
To: Stephan Szabo <sszabo@megazone23.bigpanda.com>; +Cc: pgsql-sql; hank@fas-art.com; annette@fas-art.com
On Thu, Feb 07, 2002 at 01:31:03PM -0800, Stephan Szabo wrote:
> On Thu, 7 Feb 2002, Frank Joerdens wrote:
>
> > Now I want to retrieve rows from A as in
> >
> > SELECT DISTINCT A.foo
> > FROM A,B
> > WHERE A.foo [matches some criteria]
> > OR B.bar [matches some other criteria]
> > AND A.id = B.a_id;
> >
> > This works fine if there is *at least* one row in B for each row in A.
> > If there isn't, I obviously get 0 results even if the column foo in A
> > matches the desired criteria. But I do want the rows from A even if
> > there is no row in B that is linked to those rows in A that match the
> > criteria. If the column bar in B matches the desired criteria, I also
> > want the rows in A that are linked to those rows in B.
>
> Sounds like you want a left outer join.
>
> Maybe...
> select distinct a.foo from
> a left outer join b on (a.ID = b.a_id)
> where a.foo [matches] or B.bar [matches]
Ah! There indeed is an entire little chapter (6.6.3) in my 'Fundamentals
of Database Systems' (Elmasri/Navathe) on this, and Bruce talks about it
too . . . albeit saying (in my version of his book) that joins ain't
supported in 7.0 and that you need to simulate 'em using UNION ALL and
subqueries.
The problem here was a combination of hubris and laziness on my part: I
thought I didn't need to learn about join syntax because I figured it
could all be done with boolean logic as in my query example above . . .
Thanks!
Frank
^ permalink raw reply [nested|flat] 5+ messages in thread
* Re: Looking for the correct solution for a generic problem.
2002-02-07 20:52 Looking for the correct solution for a generic problem. Frank Joerdens <frank@joerdens.de>
@ 2002-02-07 21:50 ` Tom Lane <tgl@sss.pgh.pa.us>
2 siblings, 0 replies; 5+ messages in thread
From: Tom Lane @ 2002-02-07 21:50 UTC (permalink / raw)
To: Frank Joerdens <frank@joerdens.de>; +Cc: pgsql-sql; hank@fas-art.com; annette@fas-art.com
Frank Joerdens <frank@joerdens.de> writes:
> This works fine if there is *at least* one row in B for each row in A.
> If there isn't, I obviously get 0 results even if the column foo in A
> matches the desired criteria. But I do want the rows from A even if
> there is no row in B that is linked to those rows in A that match the
> criteria.
You want an "outer join". Something like
FROM A LEFT JOIN B ON (A.id = B.a_id)
WHERE [other criteria]
regards, tom lane
^ permalink raw reply [nested|flat] 5+ messages in thread
end of thread, other threads:[~2002-02-07 22:04 UTC | newest]
Thread overview: 5+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2002-02-07 20:52 Looking for the correct solution for a generic problem. Frank Joerdens <frank@joerdens.de>
2002-02-07 20:53 ` Mark Nielsen <python@kepnet.net>
2002-02-07 21:31 ` Stephan Szabo <sszabo@megazone23.bigpanda.com>
2002-02-07 22:04 ` Frank Joerdens <frank@joerdens.de>
2002-02-07 21:50 ` Tom Lane <tgl@sss.pgh.pa.us>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox