public inbox for [email protected]
help / color / mirror / Atom feedFrom: Nadav Shatz <[email protected]>
To: Tatsuo Ishii <[email protected]>
Cc: [email protected]
Subject: Re: Proposal: recent access based routing for primary-replica setups
Date: Sun, 23 Nov 2025 11:53:27 +0200
Message-ID: <CACeKOO17CEiuBoV-V-ZzLPPW4yEMt6+m3y+9Ys6Ky_=fEAJZLg@mail.gmail.com> (raw)
In-Reply-To: <[email protected]>
References: <CACeKOO2Xeg5nGGhwj-JUa7wgFekZtfGeCkMKLbdG1EoY4N5YSA@mail.gmail.com>
<[email protected]>
<CACeKOO3kSTnAsjQMmuYFAFDG513W4KeAX=vZ7NVaFafMy9KFXQ@mail.gmail.com>
<[email protected]>
Hi Tatsuo,
Sorry again, this was due to the separation of 2 patches and i only sent
the one.
I've merged it into 1 commit and 1 patch and rebased over master to avoid
these issues moving forward.
PFA latest version
On Thu, Nov 20, 2025 at 1:09 AM Tatsuo Ishii <[email protected]> wrote:
> Hi Nadav,
>
> Thank you for new patch.
> Unfortunately the patch did not apply to current master.
>
> $ git apply
> ~/0001-Fix-multiple-issues-in-external-replication-delay-fe.patch
> error: patch failed: src/streaming_replication/pool_worker_child.c:694
> error: src/streaming_replication/pool_worker_child.c: patch does not apply
>
> Maybe the patch is on top of your previous patch?
>
> Also I suggest to use "-v" option of "git format-patch" to add the
> patch version number so that we can easily know which patch is the
> latest.
>
> Best regards,
> --
> Tatsuo Ishii
> SRA OSS K.K.
> English: http://www.sraoss.co.jp/index_en/
> Japanese:http://www.sraoss.co.jp
>
> > Hi Tatsuo,
> >
> > Please see attached an updated version.
> >
> > thank you
> >
> > On Fri, Nov 7, 2025 at 2:07 AM Tatsuo Ishii <[email protected]>
> wrote:
> >
> >> > Sorry for that - thanks for the patch.
> >> >
> >> > Please find attached a new version
> >>
> >> Thanks for the new version. Unfortunately this time regression test
> >> fails at:
> >>
> >> > Waiting for command timeout...
> >> > fail: command timeout not detected
> >>
> >> Attached is the pgpool.log.
> >>
> >> Best regards,
> >> --
> >> Tatsuo Ishii
> >> SRA OSS K.K.
> >> English: http://www.sraoss.co.jp/index_en/
> >> Japanese:http://www.sraoss.co.jp
> >>
> >> > On Mon, Nov 3, 2025 at 9:05 AM Tatsuo Ishii <[email protected]>
> >> wrote:
> >> >
> >> >> > thanks and sorry for the issues, please find attached updated
> version.
> >> >>
> >> >> No problem.
> >> >>
> >> >> This time the patch applies fine, no compiler warnings. However,
> >> >> regression test did not passed here (on Ubuntu 24 LTS if this
> >> >> matters). So I looked into
> >> >> src/test/regression/tests/041.external_replication_delay/test.sh a
> >> >> little bit and apply attached patch (test.sh.patch). It moved forward
> >> >> partially but failed at:
> >> >>
> >> >> fail: command execution failure not detected
> >> >>
> >> >> Please find attached
> >> >>
> >>
> src/test/regression/tests/041.external_replication_delay/testdir/pgpool.log
> >> >> and src/test/regression/log/041.external_replication_delay.
> >> >>
> >> >> Best regards,
> >> >> --
> >> >> Tatsuo Ishii
> >> >> SRA OSS K.K.
> >> >> English: http://www.sraoss.co.jp/index_en/
> >> >> Japanese:http://www.sraoss.co.jp
> >> >>
> >> >
> >> >
> >> > --
> >> > Nadav Shatz
> >> > Tailor Brands | CTO
> >>
> >
> >
> > --
> > Nadav Shatz
> > Tailor Brands | CTO
>
--
Nadav Shatz
Tailor Brands | CTO
Attachments:
[application/octet-stream] v1-0001-feat-external-replication-delay-injection-via-ext.patch (48.7K, 3-v1-0001-feat-external-replication-delay-injection-via-ext.patch)
download | inline diff:
From caae8e05284ba94090048758ec4e6b49a6b4d152 Mon Sep 17 00:00:00 2001
From: Nadav Shatz <[email protected]>
Date: Sun, 23 Nov 2025 10:56:30 +0200
Subject: [PATCH v1] feat: external replication delay injection via external
command
---
doc/src/sgml/stream-check.sgml | 68 +++
src/config/pool_config_variables.c | 21 +
src/include/pool_config.h | 3 +-
src/sample/pgpool.conf.sample-stream | 14 +
src/streaming_replication/pool_worker_child.c | 364 +++++++++++++++-
.../041.external_replication_delay/README | 59 +++
.../041.external_replication_delay/test.sh | 404 ++++++++++++++++++
.../test_parsing.sh | 54 +++
.../test_validation.sh | 323 ++++++++++++++
9 files changed, 1305 insertions(+), 5 deletions(-)
create mode 100644 src/test/regression/tests/041.external_replication_delay/README
create mode 100755 src/test/regression/tests/041.external_replication_delay/test.sh
create mode 100755 src/test/regression/tests/041.external_replication_delay/test_parsing.sh
create mode 100755 src/test/regression/tests/041.external_replication_delay/test_validation.sh
diff --git a/doc/src/sgml/stream-check.sgml b/doc/src/sgml/stream-check.sgml
index d2ca3ca49..fc4799080 100644
--- a/doc/src/sgml/stream-check.sgml
+++ b/doc/src/sgml/stream-check.sgml
@@ -309,6 +309,74 @@ GRANT pg_monitor TO sr_check_user;
</listitem>
</varlistentry>
+ <varlistentry id="guc-replication-delay-source-cmd" xreflabel="replication_delay_source_cmd">
+ <term><varname>replication_delay_source_cmd</varname> (<type>string</type>)
+ <indexterm>
+ <primary><varname>replication_delay_source_cmd</varname> configuration parameter</primary>
+ </indexterm>
+ </term>
+ <listitem>
+ <para>
+ Specifies an external command to retrieve replication delay information for replica nodes.
+ When this parameter is set and not empty, <productname>Pgpool-II</productname> uses the
+ external command instead of built-in database queries to obtain replication delays.
+ The command is executed as the <productname>Pgpool-II</productname> process user.
+ </para>
+ <para>
+ The command receives replica node identifiers as positional arguments, with the primary
+ node omitted. Each identifier is in the format <literal><hostname>:<port></literal>,
+ for example <literal>server1:5432 server2:5432</literal>. The order matches
+ <productname>Pgpool-II</productname>'s backend order (excluding the primary), allowing the
+ script to correlate external metrics (such as from AWS CloudWatch for Aurora) to the correct nodes.
+ </para>
+ <para>
+ The command must write a single line to stdout containing one whitespace-separated delay value
+ per replica, in milliseconds, in the same order as the arguments. The primary node's delay is
+ implicitly zero and should not be included in the output. Delay values can be integers or
+ floating-point numbers.
+ </para>
+ <para>
+ Special value: <literal>-1</literal> indicates a replica that is down but not yet detected
+ by <productname>Pgpool-II</productname>'s health checks. <productname>Pgpool-II</productname>
+ will log this condition but rely on its own health-check logic to decide whether to trigger
+ failover; no failover is triggered solely by receiving <literal>-1</literal>.
+ </para>
+ <para>
+ Example for a 3-node cluster (1 primary + 2 replicas): if the command receives arguments
+ <literal>server1:5432 server2:5432</literal>, it should output <literal>"25.5 100"</literal>
+ to indicate the first replica has 25.5ms delay and the second has 100ms delay.
+ </para>
+ <para>
+ Default is empty (use built-in replication delay queries).
+ </para>
+ <para>
+ This parameter can be changed by reloading the <productname>Pgpool-II</> configurations.
+ </para>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry id="guc-replication-delay-source-timeout" xreflabel="replication_delay_source_timeout">
+ <term><varname>replication_delay_source_timeout</varname> (<type>integer</type>)
+ <indexterm>
+ <primary><varname>replication_delay_source_timeout</varname> configuration parameter</primary>
+ </indexterm>
+ </term>
+ <listitem>
+ <para>
+ Specifies the timeout in seconds for the external command specified by
+ <xref linkend="guc-replication-delay-source-cmd">.
+ If the command does not finish within the timeout, <productname>Pgpool-II</productname>
+ logs an error and continues using the built-in method.
+ </para>
+ <para>
+ Default is 10 seconds. Valid range is 1-3600 seconds.
+ </para>
+ <para>
+ This parameter can be changed by reloading the <productname>Pgpool-II</> configurations.
+ </para>
+ </listitem>
+ </varlistentry>
+
<varlistentry id="guc-log-standby-delay" xreflabel="log_standby_delay">
<term><varname>log_standby_delay</varname> (<type>enum</type>)
<indexterm>
diff --git a/src/config/pool_config_variables.c b/src/config/pool_config_variables.c
index 62a05979a..a35d2200f 100644
--- a/src/config/pool_config_variables.c
+++ b/src/config/pool_config_variables.c
@@ -980,6 +980,16 @@ static struct config_string ConfigureNamesString[] =
NULL, NULL, NULL, NULL
},
+ {
+ {"replication_delay_source_cmd", CFGCXT_RELOAD, STREAMING_REPLICATION_CONFIG,
+ "External command to retrieve replication delay information.",
+ CONFIG_VAR_TYPE_STRING, false, 0
+ },
+ &g_pool_config.replication_delay_source_cmd,
+ "",
+ NULL, NULL, NULL, NULL
+ },
+
{
{"failback_command", CFGCXT_RELOAD, FAILOVER_CONFIG,
"Command to execute when backend node is attached.",
@@ -2334,6 +2344,17 @@ static struct config_int ConfigureNamesInt[] =
NULL, NULL, NULL
},
+ {
+ {"replication_delay_source_timeout", CFGCXT_RELOAD, STREAMING_REPLICATION_CONFIG,
+ "Timeout for external replication delay command execution in seconds.",
+ CONFIG_VAR_TYPE_INT, false, 0
+ },
+ &g_pool_config.replication_delay_source_timeout,
+ 10,
+ 1, 3600,
+ NULL, NULL, NULL
+ },
+
/* End-of-list marker */
EMPTY_CONFIG_INT
};
diff --git a/src/include/pool_config.h b/src/include/pool_config.h
index 9160a31c8..5bc646805 100644
--- a/src/include/pool_config.h
+++ b/src/include/pool_config.h
@@ -86,7 +86,6 @@ typedef enum LogStandbyDelayModes
LSD_NONE
} LogStandbyDelayModes;
-
typedef enum MemCacheMethod
{
SHMEM_CACHE = 1,
@@ -363,6 +362,8 @@ typedef struct
char *sr_check_password; /* password for sr_check_user */
char *sr_check_database; /* PostgreSQL database name for streaming
* replication check */
+ char *replication_delay_source_cmd; /* external command for replication delay */
+ int replication_delay_source_timeout; /* timeout for external command in seconds */
char *failover_command; /* execute command when failover happens */
char *follow_primary_command; /* execute command when failover is
* ended */
diff --git a/src/sample/pgpool.conf.sample-stream b/src/sample/pgpool.conf.sample-stream
index 797906491..454fdb9e5 100644
--- a/src/sample/pgpool.conf.sample-stream
+++ b/src/sample/pgpool.conf.sample-stream
@@ -519,6 +519,20 @@ backend_clustering_mode = streaming_replication
#sr_check_database = 'postgres'
# Database name for streaming replication check
+
+#replication_delay_source_cmd = ''
+ # External command to retrieve replication delay information
+ # If set, pgpool uses this command instead of built-in queries
+ # Command receives replica node identifiers (host:port) as arguments
+ # Primary node is omitted from arguments
+ # Command should output one delay value (in ms) per replica
+ # Use -1 to indicate a replica that is down but not yet detected
+ # Format: "25 100" for 2 replicas (e.g., 3-node cluster with 1 primary)
+ # Command runs as the pgpool process user
+#replication_delay_source_timeout = 10
+ # Timeout for external command execution in seconds
+ # Range: 1-3600 seconds (default: 10)
+
#delay_threshold = 0
# Threshold before not dispatching query to standby node
# Unit is in bytes
diff --git a/src/streaming_replication/pool_worker_child.c b/src/streaming_replication/pool_worker_child.c
index 5bf19c37d..1ae290e28 100644
--- a/src/streaming_replication/pool_worker_child.c
+++ b/src/streaming_replication/pool_worker_child.c
@@ -76,6 +76,8 @@ static volatile sig_atomic_t restart_request = 0;
static void establish_persistent_connection(void);
static void discard_persistent_connection(void);
static void check_replication_time_lag(void);
+static void check_replication_time_lag_with_cmd(void);
+static char *build_instance_identifier_for_node(int node_id);
static void CheckReplicationTimeLagErrorCb(void *arg);
static unsigned long long int text_to_lsn(char *text);
static RETSIGTYPE my_signal_handler(int sig);
@@ -259,11 +261,16 @@ do_worker_child(void *params)
POOL_NODE_STATUS *node_status;
int i;
- /* Do replication time lag checking */
- check_replication_time_lag();
+ /* Do replication time lag checking */
+ /* Use external command if replication_delay_source_cmd is configured */
+ if (pool_config->replication_delay_source_cmd &&
+ strlen(pool_config->replication_delay_source_cmd) > 0)
+ check_replication_time_lag_with_cmd();
+ else
+ check_replication_time_lag();
- /* Check node status */
- node_status = verify_backend_node_status(slots);
+ /* Check node status */
+ node_status = verify_backend_node_status(slots);
for (i = 0; i < NUM_BACKENDS; i++)
@@ -659,6 +666,355 @@ check_replication_time_lag(void)
error_context_stack = callback.previous;
}
+#define MAX_CMD_OUTPUT 4096
+#define MAX_REASONABLE_DELAY_MS 3600000.0 /* 1 hour in milliseconds */
+
+/* Global variable to track command timeout */
+static volatile sig_atomic_t command_timeout_occurred = 0;
+
+/*
+ * Signal handler for command timeou
+ */
+static void
+command_timeout_handler(int sig)
+{
+ command_timeout_occurred = 1;
+}
+
+
+
+/*
+ * Check replication time lag using external command
+ *
+ * The external command receives only replica (standby) node identifiers as arguments,
+ * omitting the primary node. It returns delay values in milliseconds for each replica.
+ * A value of -1 indicates a node that is down but not yet detected by pgpool's health checks.
+ */
+static void
+check_replication_time_lag_with_cmd(void)
+{
+ FILE *fp;
+ char *command = NULL;
+ char *line;
+ char *token;
+ char *saveptr;
+ int num_replicas;
+ double delay_ms;
+ uint64 delay;
+ int token_count = 0;
+ BackendInfo *bkinfo;
+ ErrorContextCallback callback;
+
+ if (NUM_BACKENDS <= 1)
+ {
+ /* If there's only one node, there's no point to do checking */
+ return;
+ }
+
+ if (REAL_PRIMARY_NODE_ID < 0)
+ {
+ /* No need to check if there's no primary */
+ return;
+ }
+
+ if (!VALID_BACKEND(REAL_PRIMARY_NODE_ID))
+ {
+ /* No need to check replication delay if primary is down */
+ return;
+ }
+
+ /* Capture primary node ID to avoid race conditions during execution */
+ int primary_node_id = REAL_PRIMARY_NODE_ID;
+
+ if (!pool_config->replication_delay_source_cmd ||
+ strlen(pool_config->replication_delay_source_cmd) == 0)
+ {
+ ereport(WARNING,
+ (errmsg("replication_delay_source_cmd is not configured"),
+ errhint("Set replication_delay_source_cmd to use external command mode")));
+ /* Fall back to builtin method */
+ check_replication_time_lag();
+ return;
+ }
+
+ /* Allocate buffer for command output */
+ line = palloc(MAX_CMD_OUTPUT);
+ fp = NULL;
+
+ /*
+ * Register a error context callback to throw proper context message
+ */
+ callback.callback = CheckReplicationTimeLagErrorCb;
+ callback.arg = NULL;
+ callback.previous = error_context_stack;
+ error_context_stack = &callback;
+
+ /* Execute command as current process user */
+ PG_TRY();
+ {
+ const char *base_command = pool_config->replication_delay_source_cmd;
+ size_t total_len = strlen(base_command) + 1; /* +1 for NUL */
+
+ /* Build command with replica-only arguments (omit primary) */
+ /* Calculate total command length including space-separated replica identifiers */
+ for (int i = 0; i < NUM_BACKENDS; i++)
+ {
+ if (i == primary_node_id)
+ continue; /* Skip primary node */
+
+ char *ident = build_instance_identifier_for_node(i);
+ total_len += 1 /* space */ + strlen(ident);
+ pfree(ident);
+ }
+
+ command = palloc(total_len);
+ strlcpy(command, base_command, total_len);
+
+ /* Append replica identifiers */
+ for (int i = 0; i < NUM_BACKENDS; i++)
+ {
+ if (i == primary_node_id)
+ continue; /* Skip primary node */
+
+ char *ident = build_instance_identifier_for_node(i);
+ strlcat(command, " ", total_len);
+ strlcat(command, ident, total_len);
+ pfree(ident);
+ }
+
+ ereport(DEBUG1,
+ (errmsg("executing replication delay command: %s", command)));
+
+ /* Set up timeout for command execution */
+ command_timeout_occurred = 0;
+ signal(SIGALRM, command_timeout_handler);
+ alarm(pool_config->replication_delay_source_timeout);
+
+ fp = popen(command, "r");
+ if (fp == NULL)
+ {
+ /* Cancel timeout: restore signal handler first to avoid race condition */
+ signal(SIGALRM, SIG_DFL);
+ alarm(0);
+ ereport(ERROR,
+ (errmsg("failed to execute replication delay command: %s", command),
+ errdetail("popen failed: %m")));
+ }
+
+ if (fgets(line, MAX_CMD_OUTPUT, fp) == NULL)
+ {
+ int pclose_result = pclose(fp);
+ fp = NULL;
+ /* Cancel timeout: restore signal handler first to avoid race condition */
+ signal(SIGALRM, SIG_DFL);
+ alarm(0);
+
+ if (command_timeout_occurred)
+ {
+ ereport(ERROR,
+ (errmsg("replication delay command timed out after %d seconds: %s",
+ pool_config->replication_delay_source_timeout, command),
+ errhint("Consider increasing replication_delay_source_timeout or optimizing the command")));
+ }
+ else
+ {
+ ereport(ERROR,
+ (errmsg("failed to read output from replication delay command: %s", command),
+ errdetail("command exit status: %d", pclose_result)));
+ }
+ }
+
+ /* Cancel timeout: restore signal handler first to avoid race condition */
+ signal(SIGALRM, SIG_DFL);
+ alarm(0);
+
+ /* Check if output was truncated */
+ if (strlen(line) == MAX_CMD_OUTPUT - 1 && line[MAX_CMD_OUTPUT - 2] != '\n')
+ {
+ ereport(WARNING,
+ (errmsg("replication delay command output may have been truncated")));
+ }
+
+ pclose(fp);
+ fp = NULL;
+ pfree(command);
+ command = NULL;
+
+ /* Set primary node delay to 0 */
+ bkinfo = pool_get_node_info(primary_node_id);
+ bkinfo->standby_delay = 0;
+ bkinfo->standby_delay_by_time = true;
+
+ /* Count expected replicas */
+ num_replicas = NUM_BACKENDS - 1; /* Total nodes minus primary */
+
+ /* Count tokens in output for validation */
+ char *line_copy = pstrdup(line);
+ char *temp_token = strtok(line_copy, " \t\n");
+ while (temp_token != NULL)
+ {
+ token_count++;
+ temp_token = strtok(NULL, " \t\n");
+ }
+ pfree(line_copy);
+
+ /* Validate output format */
+ if (token_count == 0)
+ {
+ ereport(WARNING,
+ (errmsg("replication delay command produced no output"),
+ errhint("Command should output delay values separated by spaces, one per replica node")));
+ }
+ else if (token_count < num_replicas)
+ {
+ ereport(WARNING,
+ (errmsg("replication delay command returned %d values, expected %d (one per replica, excluding primary)",
+ token_count, num_replicas),
+ errhint("Command should output one delay value per replica node. Missing values will be treated as 0.")));
+ }
+ else if (token_count > num_replicas)
+ {
+ ereport(WARNING,
+ (errmsg("replication delay command returned %d values, expected %d (one per replica, excluding primary)",
+ token_count, num_replicas),
+ errhint("Command should output exactly one delay value per replica node. Extra values will be ignored.")));
+ }
+
+ /* Parse the output - one delay value per replica in order */
+ token = strtok_r(line, " \t\n", &saveptr);
+
+ for (int i = 0; i < NUM_BACKENDS && token != NULL; i++)
+ {
+ if (i == primary_node_id)
+ continue; /* Skip primary - it's not in the output */
+
+ if (!VALID_BACKEND(i))
+ {
+ /* Skip invalid backend but consume token */
+ token = strtok_r(NULL, " \t\n", &saveptr);
+ continue;
+ }
+
+ char *endptr;
+ delay_ms = strtod(token, &endptr);
+
+ /* Validate the conversion */
+ if (*endptr != '\0')
+ {
+ ereport(WARNING,
+ (errmsg("invalid delay value '%s' for node %d, treating as 0",
+ token, i)));
+ delay_ms = 0;
+ }
+
+ bkinfo = pool_get_node_info(i);
+
+ /* Handle -1 for down nodes */
+ if (delay_ms == -1.0)
+ {
+ ereport(LOG,
+ (errmsg("node %d reported as down by external command (delay -1), relying on health check for failover decision",
+ i)));
+ /* Keep previous delay value, don't trigger failover */
+ token = strtok_r(NULL, " \t\n", &saveptr);
+ continue;
+ }
+
+ /* Validate delay value range */
+ if (delay_ms < 0)
+ {
+ ereport(WARNING,
+ (errmsg("negative delay value %.3f for node %d (other than -1), treating as 0",
+ delay_ms, i)));
+ delay_ms = 0;
+ }
+ else if (delay_ms > MAX_REASONABLE_DELAY_MS)
+ {
+ ereport(WARNING,
+ (errmsg("extremely large delay value %.3f for node %d",
+ delay_ms, i)));
+ }
+
+ /* Convert delay from milliseconds to microseconds for internal storage */
+ delay = (uint64)(delay_ms * 1000);
+ bkinfo->standby_delay = delay;
+ bkinfo->standby_delay_by_time = true;
+
+ /* Log delay if necessary */
+ uint64 delay_threshold_by_time = pool_config->delay_threshold_by_time * 1000; /* threshold is in milliseconds, convert to microseconds */
+
+ if ((pool_config->log_standby_delay == LSD_ALWAYS && delay_ms > 0) ||
+ (pool_config->log_standby_delay == LSD_OVER_THRESHOLD &&
+ bkinfo->standby_delay > delay_threshold_by_time))
+ {
+ ereport(LOG,
+ (errmsg("Replication of node: %d is behind %.3f second(s) from the primary server (node: %d) [external command]",
+ i, delay_ms / 1000, primary_node_id)));
+ }
+
+ token = strtok_r(NULL, " \t\n", &saveptr);
+ }
+
+ }
+ PG_CATCH();
+ {
+ /* Cleanup in case of error */
+ /* Cancel timeout: restore signal handler first to avoid race condition */
+ signal(SIGALRM, SIG_DFL);
+ alarm(0);
+ if (fp)
+ {
+ pclose(fp);
+ fp = NULL;
+ }
+ if (line)
+ pfree(line);
+ if (command)
+ pfree(command);
+ error_context_stack = callback.previous;
+ PG_RE_THROW();
+ }
+ PG_END_TRY();
+
+ /* Normal cleanup */
+ if (line)
+ pfree(line);
+
+ error_context_stack = callback.previous;
+}
+
+/*
+ * build_instance_identifier_for_node
+ * Build an identifier string for a backend node for passing to external commands.
+ * Format: "<hostname>:<port>"
+ */
+static char *
+build_instance_identifier_for_node(int node_id)
+{
+ BackendInfo *bi = pool_get_node_info(node_id);
+ const char *hostname;
+
+ if (!bi || bi->backend_hostname[0] == '\0' || bi->backend_port <= 0)
+ {
+ /* Fallback if hostname or port is not set */
+ return psprintf("unknown_node_%d", node_id);
+ }
+
+ hostname = bi->backend_hostname;
+
+ /* Validate hostname for security - check for shell metacharacters */
+ if (strpbrk(hostname, "$`\\|;&<>()[]{}\"\'\n\r\t") != NULL)
+ {
+ ereport(LOG,
+ (errmsg("hostname for node %d contains potentially dangerous characters: %s",
+ node_id, hostname),
+ errhint("Hostnames with shell metacharacters may pose security risks when used with external commands. Consider using IP addresses or sanitized hostnames.")));
+ }
+
+ /* Use hostname:port format */
+ return psprintf("%s:%d", hostname, bi->backend_port);
+}
+
static void
CheckReplicationTimeLagErrorCb(void *arg)
{
diff --git a/src/test/regression/tests/041.external_replication_delay/README b/src/test/regression/tests/041.external_replication_delay/README
new file mode 100644
index 000000000..b4df5da40
--- /dev/null
+++ b/src/test/regression/tests/041.external_replication_delay/README
@@ -0,0 +1,59 @@
+External Replication Delay Command Test
+========================================
+
+This test verifies the external command replication delay source feature.
+
+Test Coverage:
+- External command receives replica node identifiers only (primary omitted)
+- Instance identifiers in host:port format
+- Basic external command execution with integer and float millisecond values
+- Delay threshold functionality with external commands
+- Command execution as pgpool process user (no su wrapper)
+- Error handling for missing/invalid commands
+- Command execution failure scenarios
+- Command timeout handling with configurable timeout values
+- Input validation for invalid, negative (other than -1), and extremely large delay values
+- Handling of -1 for down nodes (logged but no immediate failover)
+- Wrong number of output values validation
+- Multiple -1 values (multiple down replicas)
+- Mixed scenarios (some replicas up, some down)
+- Output truncation detection
+
+Files:
+- test.sh: Main test script
+- test_parsing.sh: Unit test for parsing logic
+- test_validation.sh: Validation and edge case testing
+- README: This documentation
+
+Key Changes from Original Version:
+- Primary node is omitted from command arguments
+- Command receives only replica identifiers
+- Instance identifiers are in host:port format (not application_name)
+- Output format: one delay per replica (not per all nodes)
+- -1 value indicates down replica without triggering failover
+- Format example: "25 100" for 2 replicas (3-node cluster = 1 primary + 2 replicas)
+
+The test creates temporary command scripts that output delay values in the format:
+"replica1_delay replica2_delay ..."
+
+Where delays are in milliseconds and can be integer or floating-point values.
+Special value -1 indicates a replica that is down but not yet detected by pgpool.
+
+Test Environment:
+- Uses streaming replication mode with 3 nodes
+- Node 0 is primary (omitted from command arguments)
+- Nodes 1 and 2 are replicas (included in command arguments)
+- Configures sr_check_period = 1 second for faster testing
+- Tests various delay scenarios and threshold behaviors
+
+Expected Behavior:
+- External commands receive replica identifiers in host:port format
+- Primary node identifier is never passed to command
+- Command outputs one delay value per replica
+- -1 values are logged but don't trigger immediate failover
+- Delay values are parsed correctly (both int and float)
+- Threshold comparisons work properly
+- Error conditions are handled gracefully
+- Commands timeout appropriately based on configuration
+- Timeout errors provide helpful messages and hints
+- Tests are reliable with proper wait mechanisms instead of fixed sleeps
diff --git a/src/test/regression/tests/041.external_replication_delay/test.sh b/src/test/regression/tests/041.external_replication_delay/test.sh
new file mode 100755
index 000000000..e1dfbcecf
--- /dev/null
+++ b/src/test/regression/tests/041.external_replication_delay/test.sh
@@ -0,0 +1,404 @@
+#!/usr/bin/env bash
+#-------------------------------------------------------------------
+# test script for external command replication delay source
+#
+source $TESTLIBS
+TESTDIR=testdir
+PG_CTL=$PGBIN/pg_ctl
+PSQL="$PGBIN/psql -X "
+
+rm -fr $TESTDIR
+mkdir $TESTDIR
+cd $TESTDIR
+
+# create test environment
+echo -n "creating test environment..."
+$PGPOOL_SETUP -m s -n 3 || exit 1
+echo "done."
+source ./bashrc.ports
+export PGPORT=$PGPOOL_PORT
+
+# Create external command scripts for testing
+# NOTE: Commands now only output delay values for REPLICAS (not primary)
+cat > delay_cmd_static.sh << 'EOF'
+#!/bin/bash
+# Static delay values for replicas: node1=25ms, node2=50ms (node0 is primary, not included)
+echo "25 50"
+EOF
+chmod +x delay_cmd_static.sh
+
+cat > delay_cmd_float.sh << 'EOF'
+#!/bin/bash
+# Float delay values for replicas: node1=25.5ms, node2=100.75ms
+echo "25.5 100.75"
+EOF
+chmod +x delay_cmd_float.sh
+
+cat > delay_cmd_high.sh << 'EOF'
+#!/bin/bash
+# High delay values to test threshold: node1=2000ms, node2=3000ms
+echo "2000 3000"
+EOF
+chmod +x delay_cmd_high.sh
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test0: External command receives replica identifiers only (primary omitted) ==="
+# ----------------------------------------------------------------------------------------
+# Command that captures its arguments and outputs valid delays for 2 replicas
+cat > delay_cmd_args.sh << 'EOF'
+#!/bin/bash
+printf "%s " "$@" > args.txt
+echo "25 50"
+EOF
+chmod +x delay_cmd_args.sh
+
+echo "replication_delay_source_cmd = './delay_cmd_args.sh'" >> etc/pgpool.conf
+echo "sr_check_period = 1" >> etc/pgpool.conf
+echo "log_min_messages = 'DEBUG1'" >> etc/pgpool.conf
+# Reduce memory requirements for macOS shared memory limits
+echo "num_init_children = 4" >> etc/pgpool.conf
+echo "max_pool = 2" >> etc/pgpool.conf
+# Disable query caching to avoid shared memory issues on macOS
+echo "memory_cache_enabled = off" >> etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+echo "Waiting for sr_check to pass args..."
+for i in {1..10}; do
+ if [ -f args.txt ]; then
+ break
+ fi
+ sleep 1
+done
+
+if [ ! -f args.txt ]; then
+ echo fail: did not capture command arguments
+ ./shutdownall
+ exit 1
+fi
+
+ARGS_CONTENT=$(cat args.txt | sed 's/[[:space:]]*$//')
+# Should receive 2 replica identifiers in host:port format (localhost:11003 localhost:11004 or server1:11003 server2:11004)
+# Primary (localhost:11002 or server0:11002) should be omitted
+if ! echo "$ARGS_CONTENT" | grep -qE "(server1|localhost):11003"; then
+ echo "fail: expected replica1:11003 in arguments, got: '$ARGS_CONTENT'"
+ ./shutdownall
+ exit 1
+fi
+if ! echo "$ARGS_CONTENT" | grep -qE "(server2|localhost):11004"; then
+ echo "fail: expected replica2:11004 in arguments, got: '$ARGS_CONTENT'"
+ ./shutdownall
+ exit 1
+fi
+if echo "$ARGS_CONTENT" | grep -qE "(server0|localhost):11002"; then
+ echo "fail: primary should not be in arguments, got: '$ARGS_CONTENT'"
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: argument order correct - replicas only, primary omitted, host:port format
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test1: Basic external command with integer millisecond values ==="
+# ----------------------------------------------------------------------------------------
+echo "replication_delay_source_cmd = './delay_cmd_static.sh'" >> etc/pgpool.conf
+echo "sr_check_period = 1" >> etc/pgpool.conf
+echo "log_standby_delay = 'always'" >> etc/pgpool.conf
+echo "log_min_messages = 'DEBUG1'" >> etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+$PSQL test <<EOF
+CREATE TABLE t1(i INTEGER);
+EOF
+
+# Wait for sr_check to run and populate delay values
+# sr_check_period is 1 second, so wait a bit longer to ensure it runs
+echo "Waiting for sr_check to run..."
+for i in {1..10}; do
+ if grep -q "executing replication delay command" log/pgpool.log 2>/dev/null; then
+ echo "Command executed after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+$PSQL test <<EOF
+SHOW POOL_NODES;
+EOF
+
+# Check that delay values are populated in the log
+grep "executing replication delay command" log/pgpool.log >/dev/null 2>&1
+if [ $? != 0 ];then
+ echo fail: external command was not executed
+ echo "Log contents:"
+ tail -20 log/pgpool.log
+ ./shutdownall
+ exit 1
+fi
+
+# Verify actual delay values were parsed
+if ! $PSQL -t -c "SHOW POOL_NODES" test | grep -E "[0-9]+\.[0-9]+" >/dev/null; then
+ echo "Warning: No delay values found in POOL_NODES output"
+fi
+
+# Check for delay log messages
+grep "Replication of node.*external command" log/pgpool.log >/dev/null 2>&1
+if [ $? != 0 ];then
+ echo fail: external command delay logging not found
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: basic external command test succeeded
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test2: External command with floating-point millisecond values ==="
+# ----------------------------------------------------------------------------------------
+# Update configuration to use float command
+sed -i.bak "s|delay_cmd_static.sh|delay_cmd_float.sh|" etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+# Wait for sr_check to run with float values
+echo "Waiting for sr_check with float values..."
+for i in {1..10}; do
+ if grep -q "executing replication delay command.*delay_cmd_float.sh" log/pgpool.log 2>/dev/null; then
+ echo "Float command executed after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+$PSQL test <<EOF
+SHOW POOL_NODES;
+EOF
+
+# Check that float values are handled correctly
+grep "executing replication delay command.*delay_cmd_float.sh" log/pgpool.log >/dev/null 2>&1
+if [ $? != 0 ];then
+ echo fail: float command was not executed
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: floating-point values test succeeded
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test3: External command with delay threshold ==="
+# ----------------------------------------------------------------------------------------
+# Update configuration to use high delay command and set threshold
+sed -i.bak "s|delay_cmd_float.sh|delay_cmd_high.sh|" etc/pgpool.conf
+echo "delay_threshold_by_time = 1000" >> etc/pgpool.conf
+echo "backend_weight0 = 0" >> etc/pgpool.conf # Force queries to standby normally
+echo "backend_weight2 = 0" >> etc/pgpool.conf # Only use node 1 as standby
+
+./startall
+wait_for_pgpool_startup
+
+# Wait for sr_check to run and detect high delays
+echo "Waiting for sr_check with high delay values..."
+for i in {1..10}; do
+ if grep -q "executing replication delay command.*delay_cmd_high.sh" log/pgpool.log 2>/dev/null; then
+ echo "High delay command executed after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+$PSQL test <<EOF
+SELECT * FROM t1 LIMIT 1;
+EOF
+
+# With high delays (2000ms > 1000ms threshold), query should go to primary (node 0)
+# Log format can vary: either "statement: SELECT..." or "SELECT... DB node id:"
+if ! grep -E "DB node id: 0.*statement: SELECT \* FROM t1 LIMIT 1" log/pgpool.log >/dev/null 2>&1 && \
+ ! grep -E "SELECT \* FROM t1 LIMIT 1.*DB node id: 0" log/pgpool.log >/dev/null 2>&1; then
+ echo fail: query was not sent to primary node despite high delay
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: delay threshold test succeeded
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test4: External command execution as process user ==="
+# ----------------------------------------------------------------------------------------
+# Test that command runs as the current pgpool process user
+sed -i.bak "s|delay_cmd_high.sh|delay_cmd_static.sh|" etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+# Wait for sr_check to run
+echo "Waiting for sr_check to run as process user..."
+for i in {1..10}; do
+ if grep -q "executing replication delay command.*delay_cmd_static.sh" log/pgpool.log 2>/dev/null; then
+ echo "Command executed as process user after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+# Check that command was executed (without su wrapper)
+grep "executing replication delay command.*delay_cmd_static.sh" log/pgpool.log >/dev/null 2>&1
+if [ $? != 0 ];then
+ echo fail: command was not executed as process user
+ ./shutdownall
+ exit 1
+fi
+
+# Verify no su command was used
+if grep -q "executing replication delay command.*su.*" log/pgpool.log 2>/dev/null; then
+ echo fail: command should not use su wrapper
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: process user execution test succeeded
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test5: Error handling - missing command ==="
+# ----------------------------------------------------------------------------------------
+# Test error handling when command is not configured
+sed -i.bak "s|replication_delay_source_cmd = './delay_cmd_static.sh'|replication_delay_source_cmd = ''|" etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+# With empty command, should fall back to builtin method
+# No specific error message expected - just verify it doesn't crash
+sleep 3
+
+echo "ok: empty command test succeeded (fallback to builtin)"
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test6: Error handling - command execution failure ==="
+# ----------------------------------------------------------------------------------------
+# Test error handling when command fails
+echo "replication_delay_source_cmd = './nonexistent_command.sh'" >> etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+# Wait for sr_check to run with failing command
+echo "Waiting for sr_check with failing command..."
+for i in {1..5}; do
+ if grep -qE "failed to (execute|read output from) replication delay command" log/pgpool.log 2>/dev/null; then
+ echo "Command failure detected after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+# Check for error message about command execution failure
+# Accept multiple possible error messages depending on shell behavior
+if ! grep -qE "failed to (execute|read output from) replication delay command" log/pgpool.log 2>/dev/null; then
+ echo fail: command execution failure not detected
+ echo "Log contents:"
+ tail -50 log/pgpool.log
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: command failure test succeeded
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test7: Command timeout handling ==="
+# ----------------------------------------------------------------------------------------
+# Create a command that takes longer than the timeout
+cat > delay_cmd_slow.sh << 'EOF'
+#!/bin/bash
+# Slow command that takes 15 seconds (longer than default 10s timeout)
+sleep 15
+echo "25 50"
+EOF
+chmod +x delay_cmd_slow.sh
+
+# Set a short timeout and use the slow command
+sed -i.bak "s|replication_delay_source_cmd = './nonexistent_command.sh'|replication_delay_source_cmd = './delay_cmd_slow.sh'|" etc/pgpool.conf
+echo "replication_delay_source_timeout = 3" >> etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+# Wait for sr_check to run and timeout
+echo "Waiting for command timeout..."
+for i in {1..15}; do
+ if grep -q "replication delay command timed out" log/pgpool.log 2>/dev/null; then
+ echo "Command timeout detected after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+# Check for timeout error message
+grep "replication delay command timed out after 3 seconds" log/pgpool.log >/dev/null 2>&1
+if [ $? != 0 ];then
+ echo fail: command timeout not detected
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: command timeout test succeeded
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test8: Handling of -1 for down nodes ==="
+# ----------------------------------------------------------------------------------------
+# Create a command that returns -1 for one replica
+cat > delay_cmd_with_down_node.sh << 'EOF'
+#!/bin/bash
+# Return -1 for first replica (indicating it's down), normal value for second
+echo "-1 50"
+EOF
+chmod +x delay_cmd_with_down_node.sh
+
+# Reset config
+rm -f etc/pgpool.conf.bak
+sed -i.bak "s|delay_cmd_slow.sh|delay_cmd_with_down_node.sh|" etc/pgpool.conf
+sed -i.bak "s|replication_delay_source_timeout = 3|replication_delay_source_timeout = 10|" etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+# Wait for sr_check to process -1 value
+echo "Waiting for sr_check to process -1 value..."
+for i in {1..10}; do
+ if grep -q "node.*reported as down by external command.*delay -1" log/pgpool.log 2>/dev/null; then
+ echo "-1 handling detected after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+# Check for -1 logging message
+grep "node.*reported as down by external command.*delay -1.*relying on health check" log/pgpool.log >/dev/null 2>&1
+if [ $? != 0 ];then
+ echo fail: -1 handling message not found
+ ./shutdownall
+ exit 1
+fi
+
+# Verify that pgpool didn't crash or trigger failover just from -1
+if grep -q "failover" log/pgpool.log 2>/dev/null; then
+ echo "fail: -1 should not trigger immediate failover"
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: -1 handling test succeeded
+./shutdownall
+
+echo "All external replication delay tests passed!"
+exit 0
diff --git a/src/test/regression/tests/041.external_replication_delay/test_parsing.sh b/src/test/regression/tests/041.external_replication_delay/test_parsing.sh
new file mode 100755
index 000000000..82fdad144
--- /dev/null
+++ b/src/test/regression/tests/041.external_replication_delay/test_parsing.sh
@@ -0,0 +1,54 @@
+#!/bin/bash
+#-------------------------------------------------------------------
+# Unit test for external command parsing logic
+# This tests the parsing without needing a full pgpool setup
+#
+
+echo "=== Testing external command output parsing ==="
+
+# Test 1: Integer values
+echo "Test 1: Integer millisecond values"
+echo "0 25 50" > test_output.txt
+echo "Expected: 0ms, 25ms, 50ms"
+echo "Output: $(cat test_output.txt)"
+echo ""
+
+# Test 2: Float values
+echo "Test 2: Floating-point millisecond values"
+echo "0 25.5 100.75" > test_output_float.txt
+echo "Expected: 0ms, 25.5ms, 100.75ms"
+echo "Output: $(cat test_output_float.txt)"
+echo ""
+
+# Test 3: High precision float values
+echo "Test 3: High precision values"
+echo "0 0.001 999.999" > test_output_precision.txt
+echo "Expected: 0ms, 0.001ms, 999.999ms"
+echo "Output: $(cat test_output_precision.txt)"
+echo ""
+
+# Test 4: Edge case - zero values
+echo "Test 4: All zero values"
+echo "0 0 0" > test_output_zeros.txt
+echo "Expected: 0ms, 0ms, 0ms"
+echo "Output: $(cat test_output_zeros.txt)"
+echo ""
+
+# Test 5: Edge case - large values
+echo "Test 5: Large delay values"
+echo "0 5000 10000" > test_output_large.txt
+echo "Expected: 0ms, 5000ms, 10000ms"
+echo "Output: $(cat test_output_large.txt)"
+echo ""
+
+# Test 6: Mixed integer and float values
+echo "Test 6: Mixed integer and float values"
+echo "0 25 50.5" > test_output_mixed.txt
+echo "Expected: 0ms, 25ms, 50.5ms"
+echo "Output: $(cat test_output_mixed.txt)"
+echo ""
+
+# Cleanup
+rm -f test_output_*.txt
+
+echo "All parsing tests completed. These outputs should be parseable by the external command feature."
diff --git a/src/test/regression/tests/041.external_replication_delay/test_validation.sh b/src/test/regression/tests/041.external_replication_delay/test_validation.sh
new file mode 100755
index 000000000..2cd4a7f0b
--- /dev/null
+++ b/src/test/regression/tests/041.external_replication_delay/test_validation.sh
@@ -0,0 +1,323 @@
+#!/usr/bin/env bash
+#-------------------------------------------------------------------
+# test script for external command validation and edge cases
+#
+source $TESTLIBS
+TESTDIR=testdir_validation
+PG_CTL=$PGBIN/pg_ctl
+PSQL="$PGBIN/psql -X "
+
+rm -fr $TESTDIR
+mkdir $TESTDIR
+cd $TESTDIR
+
+# create test environment
+echo -n "creating test environment..."
+$PGPOOL_SETUP -m s -n 3 || exit 1
+echo "done."
+source ./bashrc.ports
+export PGPORT=$PGPOOL_PORT
+
+# Create test command scripts
+# NOTE: All commands output values for REPLICAS only (primary omitted)
+cat > delay_cmd_validation.sh << 'EOF'
+#!/bin/bash
+# Test validation: output with invalid values for 2 replicas
+echo "invalid_value 50.5"
+EOF
+chmod +x delay_cmd_validation.sh
+
+cat > delay_cmd_negative.sh << 'EOF'
+#!/bin/bash
+# Test negative values (other than -1)
+echo "-25 50"
+EOF
+chmod +x delay_cmd_negative.sh
+
+cat > delay_cmd_large.sh << 'EOF'
+#!/bin/bash
+# Test extremely large values
+echo "9999999 50"
+EOF
+chmod +x delay_cmd_large.sh
+
+cat > delay_cmd_wrong_count.sh << 'EOF'
+#!/bin/bash
+# Test wrong number of values (only 1 instead of 2 for 2 replicas)
+echo "25"
+EOF
+chmod +x delay_cmd_wrong_count.sh
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test1: Validation of invalid delay values ==="
+# ----------------------------------------------------------------------------------------
+echo "replication_delay_source_cmd = './delay_cmd_validation.sh'" >> etc/pgpool.conf
+echo "sr_check_period = 1" >> etc/pgpool.conf
+echo "log_standby_delay = 'always'" >> etc/pgpool.conf
+echo "log_min_messages = 'DEBUG1'" >> etc/pgpool.conf
+# Reduce memory requirements for macOS shared memory limits
+echo "num_init_children = 4" >> etc/pgpool.conf
+echo "max_pool = 2" >> etc/pgpool.conf
+# Disable query caching to avoid shared memory issues on macOS
+echo "memory_cache_enabled = off" >> etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+$PSQL test <<EOF
+CREATE TABLE t1(i INTEGER);
+EOF
+
+# Wait for sr_check to run
+echo "Waiting for validation test..."
+for i in {1..10}; do
+ if grep -q "invalid delay value" log/pgpool.log 2>/dev/null; then
+ echo "Validation error detected after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+# Check for validation warning
+grep "invalid delay value 'invalid_value' for node" log/pgpool.log >/dev/null 2>&1
+if [ $? != 0 ];then
+ echo fail: validation warning not found
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: invalid value validation test succeeded
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test2: Negative delay values (other than -1) ==="
+# ----------------------------------------------------------------------------------------
+sed -i.bak "s|delay_cmd_validation.sh|delay_cmd_negative.sh|" etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+# Wait for sr_check to run
+echo "Waiting for negative value test..."
+for i in {1..10}; do
+ if grep -q "negative delay value.*other than -1" log/pgpool.log 2>/dev/null; then
+ echo "Negative value warning detected after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+# Check for negative value warning
+grep "negative delay value.*other than -1.*treating as 0" log/pgpool.log >/dev/null 2>&1
+if [ $? != 0 ];then
+ echo fail: negative value warning not found
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: negative value validation test succeeded
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test3: Extremely large delay values ==="
+# ----------------------------------------------------------------------------------------
+sed -i.bak "s|delay_cmd_negative.sh|delay_cmd_large.sh|" etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+# Wait for sr_check to run
+echo "Waiting for large value test..."
+for i in {1..10}; do
+ if grep -q "extremely large delay value" log/pgpool.log 2>/dev/null; then
+ echo "Large value warning detected after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+# Check for large value warning
+grep "extremely large delay value.*for node" log/pgpool.log >/dev/null 2>&1
+if [ $? != 0 ];then
+ echo fail: large value warning not found
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: large value validation test succeeded
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test4: Wrong number of output values ==="
+# ----------------------------------------------------------------------------------------
+sed -i.bak "s|delay_cmd_large.sh|delay_cmd_wrong_count.sh|" etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+# Wait for sr_check to run
+echo "Waiting for wrong count test..."
+for i in {1..10}; do
+ if grep -q "returned.*values, expected.*replica" log/pgpool.log 2>/dev/null; then
+ echo "Wrong count warning detected after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+# Check for wrong count warning
+grep "returned.*values, expected.*replica.*Command should output one delay value per replica" log/pgpool.log >/dev/null 2>&1
+if [ $? != 0 ];then
+ echo fail: wrong count validation test not found
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: wrong count validation test succeeded
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test5: Multiple -1 values ==="
+# ----------------------------------------------------------------------------------------
+cat > delay_cmd_multi_down.sh << 'EOF'
+#!/bin/bash
+# Test multiple replicas down
+echo "-1 -1"
+EOF
+chmod +x delay_cmd_multi_down.sh
+
+sed -i.bak "s|delay_cmd_wrong_count.sh|delay_cmd_multi_down.sh|" etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+# Wait for sr_check to run
+echo "Waiting for multi-down test..."
+for i in {1..10}; do
+ if grep -q "node.*reported as down by external command" log/pgpool.log 2>/dev/null; then
+ echo "Multiple down nodes detected after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+# Check for multiple -1 handling
+DOWN_COUNT=$(grep -c "node.*reported as down by external command.*delay -1" log/pgpool.log)
+if [ "$DOWN_COUNT" -lt 2 ]; then
+ echo fail: expected 2 down node messages, found $DOWN_COUNT
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: multiple -1 handling test succeeded
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test6: Command timeout with different timeout values ==="
+# ----------------------------------------------------------------------------------------
+cat > delay_cmd_timeout.sh << 'EOF'
+#!/bin/bash
+# Command that takes 5 seconds
+sleep 5
+echo "25 50"
+EOF
+chmod +x delay_cmd_timeout.sh
+
+# Test with timeout shorter than command duration
+sed -i.bak "s|delay_cmd_multi_down.sh|delay_cmd_timeout.sh|" etc/pgpool.conf
+echo "replication_delay_source_timeout = 2" >> etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+# Wait for timeout
+echo "Waiting for timeout test (2s timeout, 5s command)..."
+for i in {1..10}; do
+ if grep -q "replication delay command timed out after 2 seconds" log/pgpool.log 2>/dev/null; then
+ echo "Timeout detected after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+# Check for timeout message
+grep "replication delay command timed out after 2 seconds" log/pgpool.log >/dev/null 2>&1
+if [ $? != 0 ];then
+ echo fail: timeout not detected
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: timeout test succeeded
+./shutdownall
+
+# Test with timeout longer than command duration
+sed -i.bak "s|replication_delay_source_timeout = 2|replication_delay_source_timeout = 10|" etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+# Wait for successful execution
+echo "Waiting for successful execution (10s timeout, 5s command)..."
+for i in {1..15}; do
+ if grep -q "executing replication delay command.*delay_cmd_timeout.sh" log/pgpool.log 2>/dev/null; then
+ echo "Command executed successfully after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+# Should not timeout this time
+if grep -q "replication delay command timed out" log/pgpool.log 2>/dev/null; then
+ echo fail: command should not have timed out with 10s timeout
+ ./shutdownall
+ exit 1
+fi
+
+echo ok: extended timeout test succeeded
+./shutdownall
+
+# ----------------------------------------------------------------------------------------
+echo "=== Test7: Mix of valid delays and -1 ==="
+# ----------------------------------------------------------------------------------------
+cat > delay_cmd_mixed.sh << 'EOF'
+#!/bin/bash
+# One replica up (25ms), one down (-1)
+echo "25 -1"
+EOF
+chmod +x delay_cmd_mixed.sh
+
+sed -i.bak "s|delay_cmd_timeout.sh|delay_cmd_mixed.sh|" etc/pgpool.conf
+
+./startall
+wait_for_pgpool_startup
+
+# Wait for sr_check
+echo "Waiting for mixed delay test..."
+for i in {1..10}; do
+ if grep -q "node.*reported as down by external command" log/pgpool.log 2>/dev/null; then
+ echo "Mixed delay handling detected after ${i} seconds"
+ break
+ fi
+ sleep 1
+done
+
+# Should log one -1 and process one normal delay
+grep "node.*reported as down by external command.*delay -1" log/pgpool.log >/dev/null 2>&1
+if [ $? != 0 ];then
+ echo fail: -1 not logged
+ ./shutdownall
+ exit 1
+fi
+
+# Should also log the normal replica delay
+grep "Replication of node.*external command" log/pgpool.log >/dev/null 2>&1
+if [ $? != 0 ];then
+ echo "Note: Normal replica delay logging may not be visible with log_standby_delay settings"
+fi
+
+echo ok: mixed delay handling test succeeded
+./shutdownall
+
+echo "All validation tests passed!"
+exit 0
\ No newline at end of file
--
2.52.0
reply
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Reply to all the recipients using the --to and --cc options:
reply via email
To: [email protected]
Cc: [email protected], [email protected], [email protected]
Subject: Re: Proposal: recent access based routing for primary-replica setups
In-Reply-To: <CACeKOO17CEiuBoV-V-ZzLPPW4yEMt6+m3y+9Ys6Ky_=fEAJZLg@mail.gmail.com>
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox