From: Nick Howden <n.howden@eris.qinetiq.com>
To: pgsql-admin@postgresql.org
Subject: Re: Auto Vacuum not starting unless postgres is restarted
Date: Fri, 15 Sep 2006 16:57:40 +0100
Message-ID: <200609151657.40122.n.howden@eris.qinetiq.com> (raw)
>> Hi,
>>
>> On startup we get an error in the postgres log that the Autovacuum process
has
>> failed to start -- "autovacuum not started because of misconfiguration".
>> However, if we do a restart (/etc/init/d/postgresql8.1 restart) then the
>> autovacuum starts fine.
>>
>> Does anybody have any idea what the problem might be?
> Do you have a message about failure to start the statistics collector as
> well (on the first try), which is missing on the reattempt?
>
>It may be that the startup firewall policy (at the time the PostgreSQL
>is first started) is restrictive, and is relaxed later on the boot
>process.
Yes, I do have the message about the failure to start the statistics
collector.
The firewall rules I have are :
# Postgres Statistics Collector
iptables -A INPUT -p udp \
-i lo --sport 32779 --dport 32779 \
-j ACCEPT
iptables -A OUTPUT -p udp \
-o lo --sport 32779 --dport 32779 \
-j ACCEPT
###
iptables -A INPUT -p tcp \
--sport 1024:65535 \
--dport 5432 \
-m state --state NEW,ESTABLISHED,RELATED \
-j ACCEPT
iptables -A OUTPUT -p tcp \
--dport 1024:65535 \
--sport 5432 \
-m state --state ESTABLISHED,RELATED \
-j ACCEPT
but these should be the same both during boot and after the boot process has
finished
Nick
--
Nick Howden - Senior IT Analyst
QinetiQ Trusted Information Management
Woodward Building, Room B009
Malvern Technology Park, WR14 3PS
Telephone 01684 895566, Fax 896660
The Information contained in this E-Mail and any subsequent correspondence
is private and is intended solely for the intended recipient(s).
For those other than the recipient any disclosure, copying, distribution,
or any action taken or omitted to be taken in reliance on such information is
prohibited and may be unlawful
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Reply to all the recipients from your mail client; the link fills in
the headers below: reply via email
Some clients, webmail especially, drop In-Reply-To and References from
a link, and the reply then starts a new thread: use the mbox below.
To: pgsql-admin@postgresql.org
Cc: n.howden@eris.qinetiq.com
Subject: Re: Auto Vacuum not starting unless postgres is restarted
In-Reply-To: <200609151657.40122.n.howden@eris.qinetiq.com>
References: <200609151657.40122.n.howden@eris.qinetiq.com>
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox