From: Rural Hunter <ruralhunter@gmail.com>
To: pgsql-admin@postgresql.org
Cc: Kevin Grittner <Kevin.Grittner@wicourts.gov>
Cc: Julio Leyva <jcleyva@hotmail.com>
Subject: Re: plsql gets "out of memory"
Date: Sat, 03 Sep 2011 11:30:26 +0800
Message-ID: <4E619F52.7050104@gmail.com> (raw)
In-Reply-To: <4E5C3D14.1060907@gmail.com>
References: <4E5B8FF7.4040007@gmail.com>
<BAY154-W12A115156AED066911581DA1140@phx.gbl>
<4E5B9604.5070602@gmail.com>
<4E5B518002000025000407E5@gw.wicourts.gov>
<4E5BA3C0.7080909@gmail.com>
<4E5B67910200002500040805@gw.wicourts.gov>
<4E5BB423.6010303@gmail.com>
<4E5B72980200002500040820@gw.wicourts.gov>
<4E5C3D14.1060907@gmail.com>
Hi Kevin,
I did another try with following additional changes based on our discussion:
1. use the tcp connection
2. turn off autovacuum
3. turn off full_page_writes
I could import more than 30G data in about 2 hours. That's totally
acceptable performance to me with the current server capability. There
is a minor issue though. I saw a few errors during the import:
ERROR: invalid byte sequence for encoding "UTF8": 0xe6272c
ERROR: invalid byte sequence for encoding "UTF8": 0xe5272c
ERROR: invalid byte sequence for encoding "UTF8": 0xe5272c
ERROR: invalid byte sequence for encoding "UTF8": 0xe5272c
ERROR: invalid byte sequence for encoding "UTF8": 0xe68e27
ERROR: invalid byte sequence for encoding "UTF8": 0xe7272c
ERROR: invalid byte sequence for encoding "UTF8": 0xe5272c
ERROR: invalid byte sequence for encoding "UTF8": 0xe5a427
My data was exported from an UTF8 MySQL database and my pgsql db is also
UTF8. I got 8 errors above only with about 3 million records imported.
The strange thing is, I usually see the problematic SQL output in the
log if there is any error for that SQL so I have a chance to fix the
data manually. But for the errors above, I don't see any SQL logged. The
pgsql log just output error log same as above with no additional info:
2011-09-01 11:26:32 CST ERROR: invalid byte sequence for encoding
"UTF8": 0xe6272c
2011-09-01 11:26:47 CST ERROR: invalid byte sequence for encoding
"UTF8": 0xe5272c
2011-09-01 11:26:53 CST ERROR: invalid byte sequence for encoding
"UTF8": 0xe5272c
2011-09-01 11:26:58 CST ERROR: invalid byte sequence for encoding
"UTF8": 0xe5272c
2011-09-01 11:26:58 CST ERROR: invalid byte sequence for encoding
"UTF8": 0xe68e27
2011-09-01 11:27:01 CST ERROR: invalid byte sequence for encoding
"UTF8": 0xe7272c
2011-09-01 11:27:06 CST ERROR: invalid byte sequence for encoding
"UTF8": 0xe5272c
2011-09-01 11:27:15 CST ERROR: invalid byte sequence for encoding
"UTF8": 0xe5a427
What could be the cause of that?
于 2011/8/30 9:29, Rural Hunter 写道:
> Thank you. I didn't understand what 'vacuum freeze' actually does. I
> will check the detail to see if it's good for my situation. and I will
> also test the load by tcp connection. Thanks again for all your
> advices and they are really very helpful to me!
>
> 于 2011/8/30 0:06, Kevin Grittner 写道:
>> Rural Hunter<ruralhunter@gmail.com> wrote:
>>> 2011/8/29 23:18, Kevin Grittner:
>>
>>>> I also recommend a VACUUM FREEZE ANALYZE on the database unless
>>>> most of these rows will be deleted or updated before you run a
>>>> billion database transactions. Otherwise you will get a painful
>>>> "anti-wraparound" autovacuum on everything, probably at a time
>>>> of heavy usage.
>>> hmm....I will try to turn autovacuum off though I didn't see any
>>> resource intension caused by it.
>>
>> Well, turning off autovacuum during a bulk load is probably a net
>> gain if it's insert-only (i.e., no need to query just-loaded data to
>> decide what to do with new rows); but that's not what I was getting
>> at. Bulk loading 200 GB of data which is not going to be deleted or
>> updated heavily is setting a performance time bomb without a VACUUM
>> FREEZE. At some point, perhaps months later, it will be necessary
>> to freeze the tuples to prevent data loss, and since this occurs
>> based on a threshold of how many transaction IDs have been consumed,
>> it is most likely to happen at peak OLTP loads, when it will be the
>> biggest problem. A VACUUM FREEZE (and you might as well throw in
>> ANALYZE while you're at it) will take care of that up front. As a
>> side benefit it will keep SELECT statements from generating heavy
>> *write* loads on the first access to tuples, and will perform other
>> maintenance which will improve database performance.
>>
>> I just count the time for VACUUM FREEZE ANALYZE as part of the bulk
>> load time required before letting in users.
>>
>>>> Network latency?
>>
>>> No, I do the import locally on the db server so the network
>>> letency can be excluded.
>>
>> Hmm... I don't remember the details, but there was a problem at
>> some point where Linux pipe connections could introduce significant
>> latency, and you could get much better performance on a TCP
>> connection through localhost. It might be worth a try. (Maybe
>> someone else will remember the details.)
>>
>> -Kevin
>>
>
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Reply to all the recipients using the --to and --cc options:
reply via email
To: pgsql-admin@postgresql.org
Cc: ruralhunter@gmail.com, Kevin.Grittner@wicourts.gov, jcleyva@hotmail.com
Subject: Re: plsql gets "out of memory"
In-Reply-To: <4E619F52.7050104@gmail.com>
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox