agora inbox for pgsql-hackers@postgresql.org  

help / color / mirror / Atom feed

[PATCH v56 3/3] Error out any process that would block at REPACK
1888+ messages / 1 participants
[nested] [flat]

* [PATCH v56 3/3] Error out any process that would block at REPACK
@ 2026-04-01 15:35  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-04-01 15:35 UTC (permalink / raw)

Any process waiting on REPACK to release its lock would actually cause
it to deadlock when it tries to upgrade its lock to AEL, losing all work
done to that point.  We avoid this by teaching the deadlock detector to
raise an error when this condition is detected.
---
 src/backend/commands/repack.c                 | 47 ++++++++---
 src/backend/storage/lmgr/deadlock.c           | 15 ++++
 src/include/storage/proc.h                    |  6 +-
 src/test/modules/injection_points/Makefile    |  1 +
 .../expected/repack_deadlock.out              | 63 ++++++++++++++
 src/test/modules/injection_points/meson.build |  1 +
 .../specs/repack_deadlock.spec                | 83 +++++++++++++++++++
 7 files changed, 201 insertions(+), 15 deletions(-)
 create mode 100644 src/test/modules/injection_points/expected/repack_deadlock.out
 create mode 100644 src/test/modules/injection_points/specs/repack_deadlock.spec

diff --git a/src/backend/commands/repack.c b/src/backend/commands/repack.c
index 5e97fcf3818..4dae0e8ebe0 100644
--- a/src/backend/commands/repack.c
+++ b/src/backend/commands/repack.c
@@ -285,6 +285,18 @@ ExecRepack(ParseState *pstate, RepackStmt *stmt, bool isTopLevel)
 		 * to understand and we don't lose any functionality.
 		 */
 		PreventInTransactionBlock(isTopLevel, "REPACK (CONCURRENTLY)");
+
+		/*
+		 * Also set the PROC_IN_CONCURRENT_REPACK flag.  This makes the
+		 * deadlock checker cause anyone that would conflict with us to error
+		 * out.  It's important to set this flag ahead of actually locking the
+		 * relation; it won't of course affect anyone until we do have a lock
+		 * that others can conflict with.
+		 */
+		LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);
+		MyProc->statusFlags |= PROC_IN_CONCURRENT_REPACK;
+		ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
+		LWLockRelease(ProcArrayLock);
 	}
 
 	/*
@@ -489,11 +501,8 @@ RepackLockLevel(bool concurrent)
  * If indexOid is InvalidOid, the table will be rewritten in physical order
  * instead of index order.
  *
- * Note that, in the concurrent case, the function releases the lock at some
- * point, in order to get AccessExclusiveLock for the final steps (i.e. to
- * swap the relation files). To make things simpler, the caller should expect
- * OldHeap to be closed on return, regardless CLUOPT_CONCURRENT. (The
- * AccessExclusiveLock is kept till the end of the transaction.)
+ * On return, OldHeap is closed but locked with AccessExclusiveLock - the lock
+ * will be released at end of the transaction.
  *
  * 'cmd' indicates which command is being executed, to be used for error
  * messages.
@@ -1002,10 +1011,8 @@ rebuild_relation(Relation OldHeap, Relation index, bool verbose,
 		 * Note that the worker has to wait for all transactions with XID
 		 * already assigned to finish. If some of those transactions is
 		 * waiting for a lock conflicting with ShareUpdateExclusiveLock on our
-		 * table (e.g.  it runs CREATE INDEX), we can end up in a deadlock.
-		 * Not sure this risk is worth unlocking/locking the table (and its
-		 * clustering index) and checking again if it's still eligible for
-		 * REPACK CONCURRENTLY.
+		 * table (e.g. it runs CREATE INDEX), it should encounter ERROR in the
+		 * deadlock checking code.
 		 */
 		start_repack_decoding_worker(tableOid);
 
@@ -3090,7 +3097,19 @@ rebuild_relation_finish_concurrent(Relation NewHeap, Relation OldHeap,
 		LockRelationOid(OldHeap->rd_rel->reltoastrelid, AccessExclusiveLock);
 
 	/*
-	 * Tuples and pages of the old heap will be gone, but the heap will stay.
+	 * Now that we have all access-exclusive locks on all relations, we no
+	 * longer want other processes to error out when trying to acquire a
+	 * conflicting lock.  Therefore, unset our flag.
+	 */
+	LWLockAcquire(ProcArrayLock, LW_EXCLUSIVE);
+	MyProc->statusFlags &= ~PROC_IN_CONCURRENT_REPACK;
+	ProcGlobal->statusFlags[MyProc->pgxactoff] = MyProc->statusFlags;
+	LWLockRelease(ProcArrayLock);
+
+	/*
+	 * Tuples and pages of the old heap will be gone, but the heap itself will
+	 * stay.  In order for predicate locks to continue to work, convert them
+	 * to relation-level locks.  We do this both for table and indexes.
 	 */
 	TransferPredicateLocksToHeapRelation(OldHeap);
 	foreach_ptr(RelationData, index, indexrels)
@@ -3364,9 +3383,11 @@ start_repack_decoding_worker(Oid relid)
 
 	/*
 	 * The decoding setup must be done before the caller can have XID assigned
-	 * for any reason, otherwise the worker might end up in a deadlock,
-	 * waiting for the caller's transaction to end. Therefore wait here until
-	 * the worker indicates that it has the logical decoding initialized.
+	 * for any reason, otherwise the worker might end up waiting for the
+	 * caller's transaction to end. (Deadlock detector does not consider this
+	 * a conflict because the worker is in the same locking group as the
+	 * backend that launched it.) Therefore wait here until the worker
+	 * indicates that it has the logical decoding initialized.
 	 */
 	ConditionVariablePrepareToSleep(&shared->cv);
 	for (;;)
diff --git a/src/backend/storage/lmgr/deadlock.c b/src/backend/storage/lmgr/deadlock.c
index b8962d875b6..c20ac682b0d 100644
--- a/src/backend/storage/lmgr/deadlock.c
+++ b/src/backend/storage/lmgr/deadlock.c
@@ -620,6 +620,21 @@ FindLockCycleRecurseMember(PGPROC *checkProc,
 						proc->statusFlags & PROC_IS_AUTOVACUUM)
 						blocking_autovacuum_proc = proc;
 
+					/*
+					 * Similarly, if we note that we're blocked by some
+					 * process running REPACK (CONCURRENTLY), just fail.  That
+					 * process is going to upgrade its lock at some point, and
+					 * it would be inappropriate for any other process to
+					 * cause that to fail.
+					 */
+					if (checkProc == MyProc &&
+						proc->statusFlags & PROC_IN_CONCURRENT_REPACK)
+						ereport(ERROR,
+								errcode(ERRCODE_OBJECT_IN_USE),
+								errmsg("could not wait for concurrent REPACK"),
+								errdetail("Process %d waits for REPACK running on process %d",
+										  MyProc->pid, proc->pid));
+
 					/* We're done looking at this proclock */
 					break;
 				}
diff --git a/src/include/storage/proc.h b/src/include/storage/proc.h
index 3e1d1fad5f9..76c6bb44251 100644
--- a/src/include/storage/proc.h
+++ b/src/include/storage/proc.h
@@ -70,10 +70,12 @@ struct XidCache
 #define		PROC_AFFECTS_ALL_HORIZONS	0x20	/* this proc's xmin must be
 												 * included in vacuum horizons
 												 * in all databases */
+#define		PROC_IN_CONCURRENT_REPACK	0x40	/* REPACK (CONCURRENTLY) */
 
-/* flags reset at EOXact */
+/* flags reset at EOXact.  A bit of a misnomer ... */
 #define		PROC_VACUUM_STATE_MASK \
-	(PROC_IN_VACUUM | PROC_IN_SAFE_IC | PROC_VACUUM_FOR_WRAPAROUND)
+	(PROC_IN_VACUUM | PROC_IN_SAFE_IC | PROC_VACUUM_FOR_WRAPAROUND | \
+	 PROC_IN_CONCURRENT_REPACK)
 
 /*
  * Xmin-related flags. Make sure any flags that affect how the process' Xmin
diff --git a/src/test/modules/injection_points/Makefile b/src/test/modules/injection_points/Makefile
index 2cd7d87c533..f7663859fe2 100644
--- a/src/test/modules/injection_points/Makefile
+++ b/src/test/modules/injection_points/Makefile
@@ -15,6 +15,7 @@ REGRESS_OPTS = --dlpath=$(top_builddir)/src/test/regress
 ISOLATION = basic \
 	    inplace \
 	    repack \
+	    repack_deadlock \
 	    repack_toast \
 	    syscache-update-pruned \
 	    heap_lock_update
diff --git a/src/test/modules/injection_points/expected/repack_deadlock.out b/src/test/modules/injection_points/expected/repack_deadlock.out
new file mode 100644
index 00000000000..a86e4767536
--- /dev/null
+++ b/src/test/modules/injection_points/expected/repack_deadlock.out
@@ -0,0 +1,63 @@
+Parsed test spec with 2 sessions
+
+starting permutation: wait_before_lock add_column wakeup_before_lock check1
+injection_points_attach
+-----------------------
+                       
+(1 row)
+
+step wait_before_lock: 
+	REPACK (CONCURRENTLY) repack_deadlock USING INDEX repack_deadlock_pkey;
+ <waiting ...>
+step add_column: 
+	alter table repack_deadlock add column noise text;
+ <waiting ...>
+step add_column: <... completed>
+ERROR:  could not wait for concurrent REPACK
+step wakeup_before_lock: 
+	SELECT injection_points_wakeup('repack-concurrently-before-lock');
+
+injection_points_wakeup
+-----------------------
+                       
+(1 row)
+
+step wait_before_lock: <... completed>
+step check1: 
+	INSERT INTO relfilenodes(node)
+	SELECT relfilenode FROM pg_class WHERE relname='repack_deadlock';
+
+	SELECT count(DISTINCT node) FROM relfilenodes;
+
+	SELECT i, j FROM repack_deadlock ORDER BY i, j;
+
+	INSERT INTO data_s1(i, j)
+	SELECT i, j FROM repack_deadlock;
+
+	SELECT count(*)
+	FROM data_s1 d1 FULL JOIN data_s2 d2 USING (i, j)
+	WHERE d1.i ISNULL OR d2.i ISNULL;
+
+count
+-----
+    1
+(1 row)
+
+i|j
+-+-
+1|1
+2|2
+3|3
+4|4
+(4 rows)
+
+count
+-----
+    4
+(1 row)
+
+injection_points_detach
+-----------------------
+                       
+(1 row)
+
diff --git a/src/test/modules/injection_points/meson.build b/src/test/modules/injection_points/meson.build
index a414abb924b..1cd88d6db65 100644
--- a/src/test/modules/injection_points/meson.build
+++ b/src/test/modules/injection_points/meson.build
@@ -46,6 +46,7 @@ tests += {
       'basic',
       'inplace',
       'repack',
+      'repack_deadlock',
       'repack_toast',
       'syscache-update-pruned',
       'heap_lock_update',
diff --git a/src/test/modules/injection_points/specs/repack_deadlock.spec b/src/test/modules/injection_points/specs/repack_deadlock.spec
new file mode 100644
index 00000000000..9d23a6588c2
--- /dev/null
+++ b/src/test/modules/injection_points/specs/repack_deadlock.spec
@@ -0,0 +1,83 @@
+# Test REPACK with a concurrent transaction that would cause a deadlock
+setup
+{
+	CREATE EXTENSION injection_points;
+
+	CREATE TABLE repack_deadlock(i int PRIMARY KEY, j int);
+	INSERT INTO repack_deadlock(i, j) VALUES (1, 1), (2, 2), (3, 3), (4, 4);
+
+	CREATE TABLE relfilenodes(node oid);
+
+	CREATE TABLE data_s1(i int, j int);
+	CREATE TABLE data_s2(i int, j int);
+}
+
+teardown
+{
+	DROP TABLE repack_deadlock;
+	DROP EXTENSION injection_points;
+
+	DROP TABLE relfilenodes;
+	DROP TABLE data_s1;
+	DROP TABLE data_s2;
+}
+
+session s1
+setup
+{
+	SELECT injection_points_set_local();
+	SELECT injection_points_attach('repack-concurrently-before-lock', 'wait');
+}
+# Perform the initial load and wait for s2 to do some data changes.
+step wait_before_lock
+{
+	REPACK (CONCURRENTLY) repack_deadlock USING INDEX repack_deadlock_pkey;
+}
+# Check the table from the perspective of s1.
+#
+# Besides the contents, we also check that relfilenode has changed.
+
+# Have each session write the contents into a table and use FULL JOIN to check
+# if the outputs are identical.
+step check1
+{
+	INSERT INTO relfilenodes(node)
+	SELECT relfilenode FROM pg_class WHERE relname='repack_deadlock';
+
+	SELECT count(DISTINCT node) FROM relfilenodes;
+
+	SELECT i, j FROM repack_deadlock ORDER BY i, j;
+
+	INSERT INTO data_s1(i, j)
+	SELECT i, j FROM repack_deadlock;
+
+	SELECT count(*)
+	FROM data_s1 d1 FULL JOIN data_s2 d2 USING (i, j)
+	WHERE d1.i ISNULL OR d2.i ISNULL;
+}
+teardown
+{
+	SELECT injection_points_detach('repack-concurrently-before-lock');
+}
+
+session s2
+# Change the existing data. UPDATE changes both key and non-key columns. Also
+# update one row twice to test whether tuple version generated by this session
+# can be found.
+step add_column
+{
+	alter table repack_deadlock add column noise text;
+}
+
+step wakeup_before_lock
+{
+	SELECT injection_points_wakeup('repack-concurrently-before-lock');
+}
+
+# Test if data changes introduced while one session is performing REPACK
+# CONCURRENTLY find their way into the table.
+permutation
+	wait_before_lock
+	add_column
+	wakeup_before_lock
+	check1
-- 
2.47.3


--qs77q6fpwolne4ds--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <ah@cybertec.at>
  0 siblings, 0 replies; 1888+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1888+ messages in thread