agora inbox for [email protected]
help / color / mirror / Atom feedRE: Truncation of char, varchar types
1915+ messages / 2 participants
[nested] [flat]
* RE: Truncation of char, varchar types
@ 2001-04-10 16:41 Mike Mascari <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Mike Mascari @ 2001-04-10 16:41 UTC (permalink / raw)
To: 'Zeugswetter Andreas SB' <[email protected]>; 'Peter Eisentraut' <[email protected]>; pgsql-hackers
This is what I get in Oracle 8:
SQL> CREATE TABLE test (value VARCHAR (10));
Table created.
SQL> INSERT INTO test VALUES ('Mike Mascari');
INSERT INTO test VALUES ('Mike Mascari')
*
ERROR at line 1:
ORA-01401: inserted value too large for column
SQL> quit
Of course, if the standard is ambiguous, retaining backwards
compatibility sure would be nice.
FWIW,
Mike Mascari
[email protected]
-----Original Message-----
From: Zeugswetter Andreas SB [SMTP:[email protected]]
Sent: Tuesday, April 10, 2001 6:47 AM
To: 'Peter Eisentraut'; PostgreSQL Development
Subject: AW: [HACKERS] Truncation of char, varchar types
> Excessively long values are currently silently truncated when they
are
> inserted into char or varchar fields. This makes the entire notion
of
> specifying a length limit for these types kind of useless, IMO.
Needless
> to say, it's also not in compliance with SQL.
To quote Tom "paragraph and verse please" :-)
> How do people feel about changing this to raise an error in this
> situation?
Can't do.
> Does anybody rely on silent truncation?
Yes, iirc the only thing you are allowed to do is issue a warning,
but the truncation is allowed and must succeed.
(checked in Informix and Oracle)
The appropriate SQLSTATE is: "01004" String data, right truncation
note that class 01 is a "success with warning".
Andreas
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--tbdehtstrqwksfdh--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38 Antonin Houska <[email protected]>
0 siblings, 0 replies; 1915+ messages in thread
From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)
Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.
SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
1 file changed, 34 insertions(+), 21 deletions(-)
diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
ReorderBufferTXN *txn;
TransactionId xmin;
+ /*
+ * Each decoding session should use either cluster-wide snapshots or
+ * database-specific ones, but not both. Since the latter can have more
+ * recent value of oldestRunningXid, builder->xmin could go backwards if
+ * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+ * below.
+ */
+ if (!db_specific && OidIsValid(running->dbid))
+ return;
+
+ if (db_specific)
+ {
+ /*
+ * Make sure that we have the snapshots needed for startup, as well as
+ * those for regular cleanup: each time the cluster-wide snapshot is
+ * created (typically on slot creation or by checkpointer), the
+ * database-specific snapshot is requested here if the current session
+ * needs it.
+ */
+ if (!OidIsValid(running->dbid))
+ {
+ LogStandbySnapshot(MyDatabaseId);
+
+ return;
+ }
+ /*
+ * Snapshots issued for other databases do not contain the information
+ * about transactions in our database.
+ */
+ else if (running->dbid != MyDatabaseId)
+ return;
+ }
+
/*
* If we're not consistent yet, inspect the record to see whether it
* allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
*/
if (db_specific)
{
- /*
- * If we must only keep track of transactions running in the
- * current database, we need transaction info from exactly that
- * database.
- */
- if (running->dbid != MyDatabaseId)
- {
- LogStandbySnapshot(MyDatabaseId);
-
- return;
- }
+ Assert(running->dbid == MyDatabaseId);
/*
* We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
else
SnapBuildSerialize(builder, lsn);
- /*
- * Database specific transaction info may exist to reach CONSISTENT state
- * faster, however the code below makes no use of it. Moreover, such
- * record might cause problems because the following normal (cluster-wide)
- * record can have lower value of oldestRunningXid. In that case, let's
- * wait with the cleanup for the next regular cluster-wide record.
- */
- if (OidIsValid(running->dbid))
- return;
-
/*
* Update range of interesting xids based on the running xacts
* information. We don't increase ->xmax using it, because once we are in
--
2.47.3
--=-=-=--
^ permalink raw reply [nested|flat] 1915+ messages in thread
end of thread, other threads:[~2026-05-06 07:38 UTC | newest]
Thread overview: 1915+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2001-04-10 16:41 RE: Truncation of char, varchar types Mike Mascari <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox