agora inbox for [email protected]  

help / color / mirror / Atom feed

[PATCH v45 5/8] rename cluster.c/h to repack.c/h
1905+ messages / 2 participants
[nested] [flat]

* [PATCH v45 5/8] rename cluster.c/h to repack.c/h
@ 2026-03-27 15:40  Álvaro Herrera <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Álvaro Herrera @ 2026-03-27 15:40 UTC (permalink / raw)

---
 src/backend/commands/Makefile                |  2 +-
 src/backend/commands/matview.c               |  2 +-
 src/backend/commands/meson.build             |  2 +-
 src/backend/commands/{cluster.c => repack.c} |  6 +++---
 src/backend/commands/repack_worker.c         |  2 +-
 src/backend/commands/tablecmds.c             |  2 +-
 src/backend/commands/vacuum.c                |  2 +-
 src/backend/libpq/pqmq.c                     |  2 +-
 src/backend/postmaster/bgworker.c            |  2 +-
 src/backend/replication/logical/decode.c     |  2 +-
 src/backend/storage/ipc/procsignal.c         |  2 +-
 src/backend/tcop/postgres.c                  |  2 +-
 src/backend/tcop/utility.c                   |  2 +-
 src/include/commands/{cluster.h => repack.h} | 12 ++++++------
 14 files changed, 21 insertions(+), 21 deletions(-)
 rename src/backend/commands/{cluster.c => repack.c} (99%)
 rename src/include/commands/{cluster.h => repack.h} (92%)

diff --git a/src/backend/commands/Makefile b/src/backend/commands/Makefile
index 6926bc44818..5b9d084977e 100644
--- a/src/backend/commands/Makefile
+++ b/src/backend/commands/Makefile
@@ -18,7 +18,6 @@ OBJS = \
 	amcmds.o \
 	analyze.o \
 	async.o \
-	cluster.o \
 	collationcmds.o \
 	comment.o \
 	constraint.o \
@@ -51,6 +50,7 @@ OBJS = \
 	proclang.o \
 	propgraphcmds.o \
 	publicationcmds.o \
+	repack.o \
 	repack_worker.o \
 	schemacmds.o \
 	seclabel.o \
diff --git a/src/backend/commands/matview.c b/src/backend/commands/matview.c
index 539969d6eef..146a65dae8d 100644
--- a/src/backend/commands/matview.c
+++ b/src/backend/commands/matview.c
@@ -24,8 +24,8 @@
 #include "catalog/namespace.h"
 #include "catalog/pg_am.h"
 #include "catalog/pg_opclass.h"
-#include "commands/cluster.h"
 #include "commands/matview.h"
+#include "commands/repack.h"
 #include "commands/tablecmds.h"
 #include "commands/tablespace.h"
 #include "executor/executor.h"
diff --git a/src/backend/commands/meson.build b/src/backend/commands/meson.build
index 4a0e6f0002b..9f258d566eb 100644
--- a/src/backend/commands/meson.build
+++ b/src/backend/commands/meson.build
@@ -6,7 +6,6 @@ backend_sources += files(
   'amcmds.c',
   'analyze.c',
   'async.c',
-  'cluster.c',
   'collationcmds.c',
   'comment.c',
   'constraint.c',
@@ -39,6 +38,7 @@ backend_sources += files(
   'proclang.c',
   'propgraphcmds.c',
   'publicationcmds.c',
+  'repack.c',
   'repack_worker.c',
   'schemacmds.c',
   'seclabel.c',
diff --git a/src/backend/commands/cluster.c b/src/backend/commands/repack.c
similarity index 99%
rename from src/backend/commands/cluster.c
rename to src/backend/commands/repack.c
index 65b79ee18ff..d25ab43da7b 100644
--- a/src/backend/commands/cluster.c
+++ b/src/backend/commands/repack.c
@@ -1,6 +1,6 @@
 /*-------------------------------------------------------------------------
  *
- * cluster.c
+ * repack.c
  *    REPACK a table; formerly known as CLUSTER.  VACUUM FULL also uses
  *    parts of this code.
  *
@@ -26,7 +26,7 @@
  *
  *
  * IDENTIFICATION
- *	  src/backend/commands/cluster.c
+ *	  src/backend/commands/repack.c
  *
  *-------------------------------------------------------------------------
  */
@@ -52,9 +52,9 @@
 #include "catalog/pg_control.h"
 #include "catalog/pg_inherits.h"
 #include "catalog/toasting.h"
-#include "commands/cluster.h"
 #include "commands/defrem.h"
 #include "commands/progress.h"
+#include "commands/repack.h"
 #include "commands/repack_internal.h"
 #include "commands/tablecmds.h"
 #include "commands/vacuum.h"
diff --git a/src/backend/commands/repack_worker.c b/src/backend/commands/repack_worker.c
index 35ab1a25c42..106b2b60441 100644
--- a/src/backend/commands/repack_worker.c
+++ b/src/backend/commands/repack_worker.c
@@ -20,7 +20,7 @@
 #include "access/xlog_internal.h"
 #include "access/xlogutils.h"
 #include "access/xlogwait.h"
-#include "commands/cluster.h"
+#include "commands/repack.h"
 #include "commands/repack_internal.h"
 #include "libpq/pqmq.h"
 #include "replication/snapbuild.h"
diff --git a/src/backend/commands/tablecmds.c b/src/backend/commands/tablecmds.c
index cc70439627b..e411d84c776 100644
--- a/src/backend/commands/tablecmds.c
+++ b/src/backend/commands/tablecmds.c
@@ -57,10 +57,10 @@
 #include "catalog/storage.h"
 #include "catalog/storage_xlog.h"
 #include "catalog/toasting.h"
-#include "commands/cluster.h"
 #include "commands/comment.h"
 #include "commands/defrem.h"
 #include "commands/event_trigger.h"
+#include "commands/repack.h"
 #include "commands/sequence.h"
 #include "commands/tablecmds.h"
 #include "commands/tablespace.h"
diff --git a/src/backend/commands/vacuum.c b/src/backend/commands/vacuum.c
index 201835f30a4..ac41c819f65 100644
--- a/src/backend/commands/vacuum.c
+++ b/src/backend/commands/vacuum.c
@@ -38,9 +38,9 @@
 #include "catalog/pg_database.h"
 #include "catalog/pg_inherits.h"
 #include "commands/async.h"
-#include "commands/cluster.h"
 #include "commands/defrem.h"
 #include "commands/progress.h"
+#include "commands/repack.h"
 #include "commands/vacuum.h"
 #include "miscadmin.h"
 #include "nodes/makefuncs.h"
diff --git a/src/backend/libpq/pqmq.c b/src/backend/libpq/pqmq.c
index 1000b7bb06e..cbf6c5a004f 100644
--- a/src/backend/libpq/pqmq.c
+++ b/src/backend/libpq/pqmq.c
@@ -14,7 +14,7 @@
 #include "postgres.h"
 
 #include "access/parallel.h"
-#include "commands/cluster.h"
+#include "commands/repack.h"
 #include "libpq/libpq.h"
 #include "libpq/pqformat.h"
 #include "libpq/pqmq.h"
diff --git a/src/backend/postmaster/bgworker.c b/src/backend/postmaster/bgworker.c
index 1de66cc038f..40571d38d93 100644
--- a/src/backend/postmaster/bgworker.c
+++ b/src/backend/postmaster/bgworker.c
@@ -13,7 +13,7 @@
 #include "postgres.h"
 
 #include "access/parallel.h"
-#include "commands/cluster.h"
+#include "commands/repack.h"
 #include "libpq/pqsignal.h"
 #include "miscadmin.h"
 #include "pgstat.h"
diff --git a/src/backend/replication/logical/decode.c b/src/backend/replication/logical/decode.c
index f172c0b2b40..8a969ddca41 100644
--- a/src/backend/replication/logical/decode.c
+++ b/src/backend/replication/logical/decode.c
@@ -33,7 +33,7 @@
 #include "access/xlogreader.h"
 #include "access/xlogrecord.h"
 #include "catalog/pg_control.h"
-#include "commands/cluster.h"
+#include "commands/repack.h"
 #include "replication/decode.h"
 #include "replication/logical.h"
 #include "replication/message.h"
diff --git a/src/backend/storage/ipc/procsignal.c b/src/backend/storage/ipc/procsignal.c
index dd980145ced..f02b9eb8312 100644
--- a/src/backend/storage/ipc/procsignal.c
+++ b/src/backend/storage/ipc/procsignal.c
@@ -19,7 +19,7 @@
 
 #include "access/parallel.h"
 #include "commands/async.h"
-#include "commands/cluster.h"
+#include "commands/repack.h"
 #include "miscadmin.h"
 #include "pgstat.h"
 #include "port/pg_bitutils.h"
diff --git a/src/backend/tcop/postgres.c b/src/backend/tcop/postgres.c
index 4d253eddfa0..07bf300e044 100644
--- a/src/backend/tcop/postgres.c
+++ b/src/backend/tcop/postgres.c
@@ -36,10 +36,10 @@
 #include "access/xact.h"
 #include "catalog/pg_type.h"
 #include "commands/async.h"
-#include "commands/cluster.h"
 #include "commands/event_trigger.h"
 #include "commands/explain_state.h"
 #include "commands/prepare.h"
+#include "commands/repack.h"
 #include "common/pg_prng.h"
 #include "jit/jit.h"
 #include "libpq/libpq.h"
diff --git a/src/backend/tcop/utility.c b/src/backend/tcop/utility.c
index 2b609bfc824..5f8c766c4be 100644
--- a/src/backend/tcop/utility.c
+++ b/src/backend/tcop/utility.c
@@ -26,7 +26,6 @@
 #include "catalog/toasting.h"
 #include "commands/alter.h"
 #include "commands/async.h"
-#include "commands/cluster.h"
 #include "commands/collationcmds.h"
 #include "commands/comment.h"
 #include "commands/conversioncmds.h"
@@ -46,6 +45,7 @@
 #include "commands/proclang.h"
 #include "commands/propgraphcmds.h"
 #include "commands/publicationcmds.h"
+#include "commands/repack.h"
 #include "commands/schemacmds.h"
 #include "commands/seclabel.h"
 #include "commands/sequence.h"
diff --git a/src/include/commands/cluster.h b/src/include/commands/repack.h
similarity index 92%
rename from src/include/commands/cluster.h
rename to src/include/commands/repack.h
index 8ed7816e7b4..6b4ebd7fa5d 100644
--- a/src/include/commands/cluster.h
+++ b/src/include/commands/repack.h
@@ -1,17 +1,17 @@
 /*-------------------------------------------------------------------------
  *
- * cluster.h
- *	  header file for postgres cluster command stuff
+ * repack.h
+ *	  header file for the REPACK command
  *
  * Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
  * Portions Copyright (c) 1994-5, Regents of the University of California
  *
- * src/include/commands/cluster.h
+ * src/include/commands/repack.h
  *
  *-------------------------------------------------------------------------
  */
-#ifndef CLUSTER_H
-#define CLUSTER_H
+#ifndef REPACK_H
+#define REPACK_H
 
 #include <signal.h>
 
@@ -66,4 +66,4 @@ extern void RepackWorkerMain(Datum main_arg);
 extern bool IsRepackWorker(void);
 
 
-#endif							/* CLUSTER_H */
+#endif							/* REPACK_H */
-- 
2.47.3


--cldir6umqisr673d
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
	filename="v45-0006-Fix-a-few-problems-in-index-build-progress-repor.patch"



^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--tbdehtstrqwksfdh--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread

* [PATCH] Distinguish properly when database-specific transaction list should be used.
@ 2026-05-06 07:38  Antonin Houska <[email protected]>
  0 siblings, 0 replies; 1905+ messages in thread

From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw)

Currently, decoding session that relies on database-specific xl_running_xacts
WAL records can also use some information of cluster-wide records and vice
versa. Although this approach might reduce the total number of
xl_running_xacts records, it's simply not correct.

SnapBuildProcessRunningXacts() now decides at the very beginning whether
particular record can be used or not.
---
 src/backend/replication/logical/snapbuild.c | 55 +++++++++++++--------
 1 file changed, 34 insertions(+), 21 deletions(-)

diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c
index c8309b96ed4..b9661b7d70a 100644
--- a/src/backend/replication/logical/snapbuild.c
+++ b/src/backend/replication/logical/snapbuild.c
@@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	ReorderBufferTXN *txn;
 	TransactionId xmin;
 
+	/*
+	 * Each decoding session should use either cluster-wide snapshots or
+	 * database-specific ones, but not both. Since the latter can have more
+	 * recent value of oldestRunningXid, builder->xmin could go backwards if
+	 * it was followed by cluster-wide snapshot - see the ->xmin adjustment
+	 * below.
+	 */
+	if (!db_specific && OidIsValid(running->dbid))
+		return;
+
+	if (db_specific)
+	{
+		/*
+		 * Make sure that we have the snapshots needed for startup, as well as
+		 * those for regular cleanup: each time the cluster-wide snapshot is
+		 * created (typically on slot creation or by checkpointer), the
+		 * database-specific snapshot is requested here if the current session
+		 * needs it.
+		 */
+		if (!OidIsValid(running->dbid))
+		{
+			LogStandbySnapshot(MyDatabaseId);
+
+			return;
+		}
+		/*
+		 * Snapshots issued for other databases do not contain the information
+		 * about transactions in our database.
+		 */
+		else if (running->dbid != MyDatabaseId)
+			return;
+	}
+
 	/*
 	 * If we're not consistent yet, inspect the record to see whether it
 	 * allows to get closer to being consistent. If we are consistent, dump
@@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 		 */
 		if (db_specific)
 		{
-			/*
-			 * If we must only keep track of transactions running in the
-			 * current database, we need transaction info from exactly that
-			 * database.
-			 */
-			if (running->dbid != MyDatabaseId)
-			{
-				LogStandbySnapshot(MyDatabaseId);
-
-				return;
-			}
+			Assert(running->dbid == MyDatabaseId);
 
 			/*
 			 * We'd better be able to check during scan if the plugin does not
@@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact
 	else
 		SnapBuildSerialize(builder, lsn);
 
-	/*
-	 * Database specific transaction info may exist to reach CONSISTENT state
-	 * faster, however the code below makes no use of it. Moreover, such
-	 * record might cause problems because the following normal (cluster-wide)
-	 * record can have lower value of oldestRunningXid. In that case, let's
-	 * wait with the cleanup for the next regular cluster-wide record.
-	 */
-	if (OidIsValid(running->dbid))
-		return;
-
 	/*
 	 * Update range of interesting xids based on the running xacts
 	 * information. We don't increase ->xmax using it, because once we are in
-- 
2.47.3


--=-=-=--





^ permalink  raw  reply  [nested|flat] 1905+ messages in thread