agora inbox for [email protected]help / color / mirror / Atom feed
[PATCH v31 04/11] Add Incremental View Maintenance support to pg_dump 57+ messages / 2 participants [nested] [flat]
* [PATCH v31 04/11] Add Incremental View Maintenance support to pg_dump @ 2020-11-11 08:01 Yugo Nagata <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Yugo Nagata @ 2020-11-11 08:01 UTC (permalink / raw) Support CREATE INCREMENTAL MATERIALIZED VIEW syntax. --- src/bin/pg_dump/pg_dump.c | 18 +++++++++++++++--- src/bin/pg_dump/pg_dump.h | 2 ++ src/bin/pg_dump/t/002_pg_dump.pl | 18 ++++++++++++++++++ 3 files changed, 35 insertions(+), 3 deletions(-) diff --git a/src/bin/pg_dump/pg_dump.c b/src/bin/pg_dump/pg_dump.c index b1c4c3ec7f..92a8cbf244 100644 --- a/src/bin/pg_dump/pg_dump.c +++ b/src/bin/pg_dump/pg_dump.c @@ -6677,6 +6677,7 @@ getTables(Archive *fout, int *numTables) int i_relacl; int i_acldefault; int i_ispartition; + int i_isivm; /* * Find all the tables and table-like objects. @@ -6779,10 +6780,17 @@ getTables(Archive *fout, int *numTables) if (fout->remoteVersion >= 100000) appendPQExpBufferStr(query, - "c.relispartition AS ispartition "); + "c.relispartition AS ispartition, "); else appendPQExpBufferStr(query, - "false AS ispartition "); + "false AS ispartition, "); + + if (fout->remoteVersion >= 170000) + appendPQExpBufferStr(query, + "c.relisivm AS isivm "); + else + appendPQExpBufferStr(query, + "false AS isivm "); /* * Left join to pg_depend to pick up dependency info linking sequences to @@ -6891,6 +6899,7 @@ getTables(Archive *fout, int *numTables) i_relacl = PQfnumber(res, "relacl"); i_acldefault = PQfnumber(res, "acldefault"); i_ispartition = PQfnumber(res, "ispartition"); + i_isivm = PQfnumber(res, "isivm"); if (dopt->lockWaitTimeout) { @@ -6970,6 +6979,7 @@ getTables(Archive *fout, int *numTables) tblinfo[i].amname = pg_strdup(PQgetvalue(res, i, i_amname)); tblinfo[i].is_identity_sequence = (strcmp(PQgetvalue(res, i, i_is_identity_sequence), "t") == 0); tblinfo[i].ispartition = (strcmp(PQgetvalue(res, i, i_ispartition), "t") == 0); + tblinfo[i].isivm = (strcmp(PQgetvalue(res, i, i_isivm), "t") == 0); /* other fields were zeroed above */ @@ -16023,9 +16033,11 @@ dumpTableSchema(Archive *fout, const TableInfo *tbinfo) binary_upgrade_set_pg_class_oids(fout, q, tbinfo->dobj.catId.oid, false); - appendPQExpBuffer(q, "CREATE %s%s %s", + appendPQExpBuffer(q, "CREATE %s%s%s %s", tbinfo->relpersistence == RELPERSISTENCE_UNLOGGED ? "UNLOGGED " : "", + tbinfo->relkind == RELKIND_MATVIEW && tbinfo->isivm ? + "INCREMENTAL " : "", reltypename, qualrelname); diff --git a/src/bin/pg_dump/pg_dump.h b/src/bin/pg_dump/pg_dump.h index 9bc93520b4..4e240f8832 100644 --- a/src/bin/pg_dump/pg_dump.h +++ b/src/bin/pg_dump/pg_dump.h @@ -325,6 +325,8 @@ typedef struct _tableInfo int numParents; /* number of (immediate) parent tables */ struct _tableInfo **parents; /* TableInfos of immediate parents */ + bool isivm; /* is incrementally maintainable materialized view? */ + /* * These fields are computed only if we decide the table is interesting * (it's either a table to dump, or a direct parent of a dumpable table). diff --git a/src/bin/pg_dump/t/002_pg_dump.pl b/src/bin/pg_dump/t/002_pg_dump.pl index f0410ce6a1..a119ec8db1 100644 --- a/src/bin/pg_dump/t/002_pg_dump.pl +++ b/src/bin/pg_dump/t/002_pg_dump.pl @@ -2832,6 +2832,24 @@ my %tests = ( }, }, + 'CREATE MATERIALIZED VIEW matview_ivm' => { + create_order => 21, + create_sql => 'CREATE INCREMENTAL MATERIALIZED VIEW dump_test.matview_ivm (col1) AS + SELECT col1 FROM dump_test.test_table;', + regexp => qr/^ + \QCREATE INCREMENTAL MATERIALIZED VIEW dump_test.matview_ivm AS\E + \n\s+\QSELECT col1\E + \n\s+\QFROM dump_test.test_table\E + \n\s+\QWITH NO DATA;\E + /xm, + like => + { %full_runs, %dump_test_schema_runs, section_pre_data => 1, }, + unlike => { + exclude_dump_test_schema => 1, + only_dump_measurement => 1, + }, + }, + 'CREATE POLICY p1 ON test_table' => { create_order => 22, create_sql => 'CREATE POLICY p1 ON dump_test.test_table -- 2.25.1 --Multipart=_Fri__29_Mar_2024_23_47_00_+0900_KGpmmDOIs1266Ib1 Content-Type: text/x-diff; name="v31-0005-Add-Incremental-View-Maintenance-support-to-psql.patch" Content-Disposition: attachment; filename="v31-0005-Add-Incremental-View-Maintenance-support-to-psql.patch" Content-Transfer-Encoding: 7bit ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
* [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition @ 2026-07-01 10:31 Jonathan Gonzalez V. <[email protected]> 0 siblings, 0 replies; 57+ messages in thread From: Jonathan Gonzalez V. @ 2026-07-01 10:31 UTC (permalink / raw) There was three separated definition of the function making lcov v2.x fail with an error. --- src/interfaces/libpq/fe-auth-oauth.c | 61 +++++++++++----------------- 1 file changed, 24 insertions(+), 37 deletions(-) diff --git a/src/interfaces/libpq/fe-auth-oauth.c b/src/interfaces/libpq/fe-auth-oauth.c index 826f7461cb3..7a35647feb8 100644 --- a/src/interfaces/libpq/fe-auth-oauth.c +++ b/src/interfaces/libpq/fe-auth-oauth.c @@ -833,41 +833,42 @@ cleanup_oauth_flow(PGconn *conn) * failure, and positive indicates success. */ -#if !defined(USE_LIBCURL) +#if defined(USE_LIBCURL) && defined(USE_DYNAMIC_OAUTH) /* - * This configuration doesn't support the builtin flow. + * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. */ -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ - return 0; -} +typedef char *(*libpq_gettext_func) (const char *msgid); -#elif defined(USE_DYNAMIC_OAUTH) +#elif defined(USE_LIBCURL) /* - * Use the builtin flow in the libpq-oauth plugin, which is loaded at runtime. + * For static builds, we can just call pg_start_oauthbearer() directly. It's + * provided by libpq-oauth.a. */ +extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); -typedef char *(*libpq_gettext_func) (const char *msgid); +#endif -/* - * Loads the libpq-oauth plugin via dlopen(), initializes it, and plugs its - * callbacks into the connection's async auth handlers. - * - * Failure to load here results in a relatively quiet connection error, to - * handle the use case where the build supports loading a flow but a user does - * not want to install it. Troubleshooting of linker/loader failures can be done - * via PGOAUTHDEBUG. - * - * The lifetime of *request ends shortly after this call, so it must be copied - * to longer-lived storage. - */ static int use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) { +#if !defined(USE_LIBCURL) + return 0; +#elif defined(USE_DYNAMIC_OAUTH) + /* + * Load the libpq-oauth plugin via dlopen(), initialize it, and plug its + * callbacks into the connection's async auth handlers. + * + * Failure to load here results in a relatively quiet connection error, to + * handle the use case where the build supports loading a flow but a user + * does not want to install it. Troubleshooting of linker/loader failures + * can be done via PGOAUTHDEBUG. + * + * The lifetime of *request ends shortly after this call, so it must be + * copied to longer-lived storage. + */ static bool initialized = false; static pthread_mutex_t init_mutex = PTHREAD_MUTEX_INITIALIZER; int lockerr; @@ -976,24 +977,10 @@ use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *re } return (start_flow(conn, request) == 0) ? 1 : -1; -} - #else - -/* - * For static builds, we can just call pg_start_oauthbearer() directly. It's - * provided by libpq-oauth.a. - */ - -extern int pg_start_oauthbearer(PGconn *conn, PGoauthBearerRequestV2 *request); - -static int -use_builtin_flow(PGconn *conn, fe_oauth_state *state, PGoauthBearerRequestV2 *request) -{ return (pg_start_oauthbearer(conn, request) == 0) ? 1 : -1; -} - #endif /* USE_LIBCURL */ +} /* -- 2.53.0 --=-=-= Content-Type: text/x-diff Content-Disposition: attachment; filename=v1-0002-Collapse-SH_CREATE-into-a-single-definition.patch ^ permalink raw reply [nested|flat] 57+ messages in thread
end of thread, other threads:[~2026-07-01 10:31 UTC | newest] Thread overview: 57+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2020-11-11 08:01 [PATCH v31 04/11] Add Incremental View Maintenance support to pg_dump Yugo Nagata <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]> 2026-07-01 10:31 [PATCH v1 1/2] libpq-oauth: collapse use_builtin_flow() into a single definition Jonathan Gonzalez V. <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox