agora inbox for [email protected]help / color / mirror / Atom feed
[PATCH v47 5/9] Use BulkInsertState when copying data to the new heap. 101+ messages / 1 participants [nested] [flat]
* [PATCH v47 5/9] Use BulkInsertState when copying data to the new heap. @ 2026-03-11 14:20 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-03-11 14:20 UTC (permalink / raw) It should make the copying more efficient. Besides that, buffer access strategy is involved this way. This diff reverts the changes done in previous parts of the series to reform_and_rewrite_tuple() and introduces a separate function heap_insert_for_repack(). --- src/backend/access/heap/heapam_handler.c | 110 +++++++++++++++-------- 1 file changed, 72 insertions(+), 38 deletions(-) diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c index df12117236a..f6bfb282489 100644 --- a/src/backend/access/heap/heapam_handler.c +++ b/src/backend/access/heap/heapam_handler.c @@ -51,6 +51,11 @@ static void reform_and_rewrite_tuple(HeapTuple tuple, Relation OldHeap, Relation NewHeap, Datum *values, bool *isnull, RewriteState rwstate); +static void heap_insert_for_repack(HeapTuple tuple, Relation OldHeap, + Relation NewHeap, Datum *values, bool *isnull, + BulkInsertState bistate); +static HeapTuple reform_tuple(HeapTuple tuple, Relation OldHeap, + Relation NewHeap, Datum *values, bool *isnull); static bool SampleHeapTupleVisible(TableScanDesc scan, Buffer buffer, HeapTuple tuple, @@ -708,6 +713,7 @@ heapam_relation_copy_for_cluster(Relation OldHeap, Relation NewHeap, double *tups_recently_dead) { RewriteState rwstate = NULL; + BulkInsertState bistate = NULL; IndexScanDesc indexScan; TableScanDesc tableScan; HeapScanDesc heapScan; @@ -743,6 +749,8 @@ heapam_relation_copy_for_cluster(Relation OldHeap, Relation NewHeap, if (!concurrent) rwstate = begin_heap_rewrite(OldHeap, NewHeap, OldestXmin, *xid_cutoff, *multi_cutoff); + else + bistate = GetBulkInsertState(); /* Set up sorting if wanted */ @@ -974,8 +982,12 @@ heapam_relation_copy_for_cluster(Relation OldHeap, Relation NewHeap, }; int64 ct_val[2]; - reform_and_rewrite_tuple(tuple, OldHeap, NewHeap, - values, isnull, rwstate); + if (!concurrent) + reform_and_rewrite_tuple(tuple, OldHeap, NewHeap, + values, isnull, rwstate); + else + heap_insert_for_repack(tuple, OldHeap, NewHeap, + values, isnull, bistate); /* * In indexscan mode and also VACUUM FULL, report increase in @@ -1023,10 +1035,15 @@ heapam_relation_copy_for_cluster(Relation OldHeap, Relation NewHeap, break; n_tuples += 1; - reform_and_rewrite_tuple(tuple, - OldHeap, NewHeap, - values, isnull, - rwstate); + if (!concurrent) + reform_and_rewrite_tuple(tuple, + OldHeap, NewHeap, + values, isnull, + rwstate); + else + heap_insert_for_repack(tuple, OldHeap, NewHeap, + values, isnull, bistate); + /* Report n_tuples */ pgstat_progress_update_param(PROGRESS_REPACK_HEAP_TUPLES_INSERTED, n_tuples); @@ -1038,6 +1055,8 @@ heapam_relation_copy_for_cluster(Relation OldHeap, Relation NewHeap, /* Write out any remaining tuples, and fsync if needed */ if (rwstate) end_heap_rewrite(rwstate); + if (bistate) + FreeBulkInsertState(bistate); /* Clean up */ pfree(values); @@ -2430,56 +2449,71 @@ heapam_scan_sample_next_tuple(TableScanDesc scan, SampleScanState *scanstate, * SET WITHOUT OIDS. * * So, we must reconstruct the tuple from component Datums. - * - * If rwstate=NULL, use simple_heap_insert() instead of rewriting - in that - * case we still need to deform/form the tuple. TODO Shouldn't we rename the - * function, as might not do any rewrite? */ static void reform_and_rewrite_tuple(HeapTuple tuple, Relation OldHeap, Relation NewHeap, Datum *values, bool *isnull, RewriteState rwstate) +{ + HeapTuple copiedTuple; + + copiedTuple = reform_tuple(tuple, OldHeap, NewHeap, values, isnull); + + /* The heap rewrite module does the rest */ + rewrite_heap_tuple(rwstate, tuple, copiedTuple); + + heap_freetuple(copiedTuple); +} + +/* + * Insert tuple when processing REPACK CONCURRENTLY. + * + * rewriteheap.c is not used in the CONCURRENTLY case because it'd be + * difficult to do the same in the catch-up phase (as the logical + * decoding does not provide us with sufficient visibility + * information). Thus we must use heap_insert() both during the + * catch-up and here. + * + * We pass the NO_LOGICAL flag to heap_insert() in order to skip logical + * decoding: as soon as REPACK CONCURRENTLY swaps the relation files, it drops + * this relation, so no logical replication subscription should need the data. + * + * BulkInsertState is used because many tuples are inserted in the typical + * case. + */ +static void +heap_insert_for_repack(HeapTuple tuple, Relation OldHeap, Relation NewHeap, + Datum *values, bool *isnull, BulkInsertState bistate) +{ + tuple = reform_tuple(tuple, OldHeap, NewHeap, values, isnull); + + heap_insert(NewHeap, tuple, GetCurrentCommandId(true), + HEAP_INSERT_NO_LOGICAL, bistate); + + heap_freetuple(tuple); +} + +/* + * Deform tuple, set values of dropped columns to NULL, form a new tuple and + * return it. + */ +static HeapTuple +reform_tuple(HeapTuple tuple, Relation OldHeap, Relation NewHeap, + Datum *values, bool *isnull) { TupleDesc oldTupDesc = RelationGetDescr(OldHeap); TupleDesc newTupDesc = RelationGetDescr(NewHeap); - HeapTuple copiedTuple; int i; heap_deform_tuple(tuple, oldTupDesc, values, isnull); - /* Be sure to null out any dropped columns */ for (i = 0; i < newTupDesc->natts; i++) { if (TupleDescCompactAttr(newTupDesc, i)->attisdropped) isnull[i] = true; } - copiedTuple = heap_form_tuple(newTupDesc, values, isnull); - - if (rwstate) - /* The heap rewrite module does the rest */ - rewrite_heap_tuple(rwstate, tuple, copiedTuple); - else - { - /* - * Insert tuple when processing REPACK CONCURRENTLY. - * - * rewriteheap.c is not used in the CONCURRENTLY case because it'd be - * difficult to do the same in the catch-up phase (as the logical - * decoding does not provide us with sufficient visibility - * information). Thus we must use heap_insert() both during the - * catch-up and here. - * - * The following is like simple_heap_insert() except that we pass the - * flag to skip logical decoding: as soon as REPACK CONCURRENTLY swaps - * the relation files, it drops this relation, so no logical - * replication subscription should need the data. - */ - heap_insert(NewHeap, copiedTuple, GetCurrentCommandId(true), - HEAP_INSERT_NO_LOGICAL, NULL); - } - - heap_freetuple(copiedTuple); + return heap_form_tuple(newTupDesc, values, isnull); } /* -- 2.47.3 --2fxmamo6mu2qbxgv Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="v47-0006-rename-cluster.c-h-to-repack.c-h.patch" ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 101+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 101+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 101+ messages in thread
end of thread, other threads:[~2026-05-06 07:38 UTC | newest] Thread overview: 101+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2026-03-11 14:20 [PATCH v47 5/9] Use BulkInsertState when copying data to the new heap. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox