agora inbox for [email protected]help / color / mirror / Atom feed
[PATCH 1/2] REPACK: do not require the user to have REPLICATION 277+ messages / 2 participants [nested] [flat]
* [PATCH 1/2] REPACK: do not require the user to have REPLICATION @ 2026-04-20 09:38 Álvaro Herrera <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Álvaro Herrera @ 2026-04-20 09:38 UTC (permalink / raw) Although REPACK (CONCURRENTLY) uses replication slots, there is no concern that the slot will leak data of other users, because the MAINTAIN privilege on the table is required anyway; requiring REPLICATION is user-unfriendly without providing any actual protection. A related aspect is that the REPLICATION attribute is not needed to prevent REPACK from stealing slots from logical replication, since commit e76d8c749c31 made REPACK use a separate pool of replication slots. Because there are now successful concurrent repack runs in the regression tests, we're forced to run test_plan_advice under wal_level=replica. Author: Antonin Houska <[email protected]> Reported-by: Justin Pryzby <[email protected]> Reviewed-by: Chao Li <[email protected]> Discussion: https://postgr.es/m/aeJHPNmL4vVy3oPw@pryzbyj2023 --- src/backend/commands/repack_worker.c | 1 - .../test_plan_advice/t/001_replan_regress.pl | 1 + src/test/regress/expected/cluster.out | 20 +++++++++++++++++-- src/test/regress/sql/cluster.sql | 11 ++++++++-- 4 files changed, 28 insertions(+), 5 deletions(-) diff --git a/src/backend/commands/repack_worker.c b/src/backend/commands/repack_worker.c index b17edd771e2..e4a4860805b 100644 --- a/src/backend/commands/repack_worker.c +++ b/src/backend/commands/repack_worker.c @@ -214,7 +214,6 @@ repack_setup_logical_decoding(Oid relid) /* * Make sure we can use logical decoding. */ - CheckSlotPermissions(); CheckLogicalDecodingRequirements(true); /* diff --git a/src/test/modules/test_plan_advice/t/001_replan_regress.pl b/src/test/modules/test_plan_advice/t/001_replan_regress.pl index 38ffa4d11ae..452b179a665 100644 --- a/src/test/modules/test_plan_advice/t/001_replan_regress.pl +++ b/src/test/modules/test_plan_advice/t/001_replan_regress.pl @@ -18,6 +18,7 @@ $node->init(); # Set up our desired configuration. $node->append_conf('postgresql.conf', <<EOM); shared_preload_libraries='test_plan_advice' +wal_level=replica pg_plan_advice.always_explain_supplied_advice=false pg_plan_advice.feedback_warnings=true EOM diff --git a/src/test/regress/expected/cluster.out b/src/test/regress/expected/cluster.out index 6127b215a86..e17bc91fae1 100644 --- a/src/test/regress/expected/cluster.out +++ b/src/test/regress/expected/cluster.out @@ -543,15 +543,17 @@ ERROR: REPACK (CONCURRENTLY) is not supported for partitioned tables HINT: Consider running the command on individual partitions. DROP TABLE clstrpart; -- Ownership of partitions is checked -CREATE TABLE ptnowner(i int unique) PARTITION BY LIST (i); +CREATE TABLE ptnowner(i int unique not null) PARTITION BY LIST (i); CREATE INDEX ptnowner_i_idx ON ptnowner(i); CREATE TABLE ptnowner1 PARTITION OF ptnowner FOR VALUES IN (1); -CREATE ROLE regress_ptnowner; +CREATE ROLE regress_ptnowner LOGIN; CREATE TABLE ptnowner2 PARTITION OF ptnowner FOR VALUES IN (2); ALTER TABLE ptnowner1 OWNER TO regress_ptnowner; SET SESSION AUTHORIZATION regress_ptnowner; CLUSTER ptnowner USING ptnowner_i_idx; ERROR: permission denied for table ptnowner +ALTER TABLE ptnowner1 REPLICA IDENTITY USING INDEX ptnowner1_i_key; +REPACK (CONCURRENTLY) ptnowner1; RESET SESSION AUTHORIZATION; ALTER TABLE ptnowner OWNER TO regress_ptnowner; CREATE TEMP TABLE ptnowner_oldnodes AS @@ -560,6 +562,11 @@ CREATE TEMP TABLE ptnowner_oldnodes AS SET SESSION AUTHORIZATION regress_ptnowner; CLUSTER ptnowner USING ptnowner_i_idx; WARNING: permission denied to execute CLUSTER on "ptnowner2", skipping it +-- still can't repack without a replica identity +ALTER TABLE ptnowner1 REPLICA IDENTITY DEFAULT; +REPACK (CONCURRENTLY) ptnowner1; +ERROR: cannot process relation "ptnowner1" +HINT: Relation "ptnowner1" has no identity index. RESET SESSION AUTHORIZATION; SELECT a.relname, a.relfilenode=b.relfilenode FROM pg_class a JOIN ptnowner_oldnodes b USING (oid) ORDER BY a.relname COLLATE "C"; @@ -570,6 +577,15 @@ SELECT a.relname, a.relfilenode=b.relfilenode FROM pg_class a ptnowner2 | t (3 rows) +SELECT a.relname, a.relfilenode=b.relfilenode FROM pg_class a + JOIN ptnowner_oldnodes b USING (oid) ORDER BY a.relname COLLATE "C"; + relname | ?column? +-----------+---------- + ptnowner | t + ptnowner1 | f + ptnowner2 | t +(3 rows) + DROP TABLE ptnowner; DROP ROLE regress_ptnowner; -- Test CLUSTER with external tuplesorting diff --git a/src/test/regress/sql/cluster.sql b/src/test/regress/sql/cluster.sql index d14063a9683..1f471a8821a 100644 --- a/src/test/regress/sql/cluster.sql +++ b/src/test/regress/sql/cluster.sql @@ -254,14 +254,16 @@ REPACK (CONCURRENTLY) clstrpart; DROP TABLE clstrpart; -- Ownership of partitions is checked -CREATE TABLE ptnowner(i int unique) PARTITION BY LIST (i); +CREATE TABLE ptnowner(i int unique not null) PARTITION BY LIST (i); CREATE INDEX ptnowner_i_idx ON ptnowner(i); CREATE TABLE ptnowner1 PARTITION OF ptnowner FOR VALUES IN (1); -CREATE ROLE regress_ptnowner; +CREATE ROLE regress_ptnowner LOGIN; CREATE TABLE ptnowner2 PARTITION OF ptnowner FOR VALUES IN (2); ALTER TABLE ptnowner1 OWNER TO regress_ptnowner; SET SESSION AUTHORIZATION regress_ptnowner; CLUSTER ptnowner USING ptnowner_i_idx; +ALTER TABLE ptnowner1 REPLICA IDENTITY USING INDEX ptnowner1_i_key; +REPACK (CONCURRENTLY) ptnowner1; RESET SESSION AUTHORIZATION; ALTER TABLE ptnowner OWNER TO regress_ptnowner; CREATE TEMP TABLE ptnowner_oldnodes AS @@ -269,7 +271,12 @@ CREATE TEMP TABLE ptnowner_oldnodes AS JOIN pg_class AS c ON c.oid=tree.relid; SET SESSION AUTHORIZATION regress_ptnowner; CLUSTER ptnowner USING ptnowner_i_idx; +-- still can't repack without a replica identity +ALTER TABLE ptnowner1 REPLICA IDENTITY DEFAULT; +REPACK (CONCURRENTLY) ptnowner1; RESET SESSION AUTHORIZATION; +SELECT a.relname, a.relfilenode=b.relfilenode FROM pg_class a + JOIN ptnowner_oldnodes b USING (oid) ORDER BY a.relname COLLATE "C"; SELECT a.relname, a.relfilenode=b.relfilenode FROM pg_class a JOIN ptnowner_oldnodes b USING (oid) ORDER BY a.relname COLLATE "C"; DROP TABLE ptnowner; -- 2.47.3 --m6zy3l65ushq557m Content-Type: text/x-diff; charset=utf-8 Content-Disposition: attachment; filename="0002-REPACK-do-not-require-LOGIN-privileges.patch" ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --=-=-=-- ^ permalink raw reply [nested|flat] 277+ messages in thread
* [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. @ 2026-05-06 07:38 Antonin Houska <[email protected]> 0 siblings, 0 replies; 277+ messages in thread From: Antonin Houska @ 2026-05-06 07:38 UTC (permalink / raw) Currently, decoding session that relies on database-specific xl_running_xacts WAL records can also use some information of cluster-wide records and vice versa. Although this approach might reduce the total number of xl_running_xacts records, it's simply not correct. SnapBuildProcessRunningXacts() now decides at the very beginning whether particular record can be used or not. --- src/backend/replication/logical/snapbuild.c | 55 +++++++++++++-------- 1 file changed, 34 insertions(+), 21 deletions(-) diff --git a/src/backend/replication/logical/snapbuild.c b/src/backend/replication/logical/snapbuild.c index c8309b96ed4..b9661b7d70a 100644 --- a/src/backend/replication/logical/snapbuild.c +++ b/src/backend/replication/logical/snapbuild.c @@ -1157,6 +1157,39 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact ReorderBufferTXN *txn; TransactionId xmin; + /* + * Each decoding session should use either cluster-wide snapshots or + * database-specific ones, but not both. Since the latter can have more + * recent value of oldestRunningXid, builder->xmin could go backwards if + * it was followed by cluster-wide snapshot - see the ->xmin adjustment + * below. + */ + if (!db_specific && OidIsValid(running->dbid)) + return; + + if (db_specific) + { + /* + * Make sure that we have the snapshots needed for startup, as well as + * those for regular cleanup: each time the cluster-wide snapshot is + * created (typically on slot creation or by checkpointer), the + * database-specific snapshot is requested here if the current session + * needs it. + */ + if (!OidIsValid(running->dbid)) + { + LogStandbySnapshot(MyDatabaseId); + + return; + } + /* + * Snapshots issued for other databases do not contain the information + * about transactions in our database. + */ + else if (running->dbid != MyDatabaseId) + return; + } + /* * If we're not consistent yet, inspect the record to see whether it * allows to get closer to being consistent. If we are consistent, dump @@ -1171,17 +1204,7 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact */ if (db_specific) { - /* - * If we must only keep track of transactions running in the - * current database, we need transaction info from exactly that - * database. - */ - if (running->dbid != MyDatabaseId) - { - LogStandbySnapshot(MyDatabaseId); - - return; - } + Assert(running->dbid == MyDatabaseId); /* * We'd better be able to check during scan if the plugin does not @@ -1198,16 +1221,6 @@ SnapBuildProcessRunningXacts(SnapBuild *builder, XLogRecPtr lsn, xl_running_xact else SnapBuildSerialize(builder, lsn); - /* - * Database specific transaction info may exist to reach CONSISTENT state - * faster, however the code below makes no use of it. Moreover, such - * record might cause problems because the following normal (cluster-wide) - * record can have lower value of oldestRunningXid. In that case, let's - * wait with the cleanup for the next regular cluster-wide record. - */ - if (OidIsValid(running->dbid)) - return; - /* * Update range of interesting xids based on the running xacts * information. We don't increase ->xmax using it, because once we are in -- 2.47.3 --tbdehtstrqwksfdh-- ^ permalink raw reply [nested|flat] 277+ messages in thread
end of thread, other threads:[~2026-05-06 07:38 UTC | newest] Thread overview: 277+ messages (download: mbox mbox.gz follow: Atom feed) -- links below jump to the message on this page -- 2026-04-20 09:38 [PATCH 1/2] REPACK: do not require the user to have REPLICATION Álvaro Herrera <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]> 2026-05-06 07:38 [PATCH 3/3] Distinguish properly when database-specific transaction list should be used. Antonin Houska <[email protected]>
This inbox is served by agora; see mirroring instructions for how to clone and mirror all data and code used for this inbox