pg.ddx.io  pgsql-performance@postgresql.org mailing list archive  
help / color / mirror / Atom feed
From: Patrick Vedrines <patrick.vedrines@adpcl.com>
To: Gustavo Franklin Nóbrega - Planae <gfnobrega@planae.com.br>
Cc: performance pgsql <pgsql-performance@postgresql.org>
Subject: Re: CPU 0.1% IOWAIT 99% for decisonnal queries
Date: Thu, 24 Mar 2005 15:04:08 +0100
Message-ID: <013501c5307a$58bea680$1e0baf96@pcpatrickxp> (raw)
References: <002601c52f0a$2312a4d0$280baf96@PCPATRICK>
	<424063BC.3050206@planae.com.br>
	<004d01c53054$965583e0$1e0baf96@pcpatrickxp>
	<4242A9EF.7070005@planae.com.br>

Great !

I'm not an expert but as far as I know, my 15 databases are spread over 4 SCSI RAID disks 73 GB 10K RPM mounted under ext3 mode. 
I remember that they where provided by DELL under RAID5 and I asked my system engineer for switching them to standard SCSI because I don't care about security but only about speed and capacity ( maybe this switch was not set properly at this time...).

Thank you for these interesting links: I 've sent them to my system engineer with my two hands !

Amicalement

Patrick
  ----- Original Message ----- 
  From: Gustavo Franklin Nóbrega - Planae 
  To: Patrick Vedrines 
  Cc: performance pgsql 
  Sent: Thursday, March 24, 2005 12:52 PM
  Subject: Re: [PERFORM] CPU 0.1% IOWAIT 99% for decisonnal queries


  Good day Patrick!
      
      I can help you to design you disk layout for better perform and security. Please, tell me how many disks (and some specs, like capacity and RPM).

      If you want to know more, there is a very interesting article abou benckmark filesystem ( http://linuxgazette.net/102/piszcz.html ). In this article, ReiserFS 3.6, JFS and XFS are in the same level at top depending your application, and ext3 is more slow than others. I believe that version 4 of the ReiserFS is better that version 3.6, but I could not still test it.

      Raid0 (striping, more at http://www.pcguide.com/ref/hdd/perf/raid/levels/singleLevel0-c.html) or Raid 0+1 (stripping + mirror, more at http://www.pcguide.com/ref/hdd/perf/raid/levels/multLevel01-c.html) is very insteresting to postgresql. Raid0 provides only performance, and Raid 0+1 provides performance and security. Take a look at this articles and think about to use Raid (http://www.pcguide.com/ref/hdd/perf/raid/).

      I'm glad to help. Best regards!

Atenciosamente,

Gustavo Franklin Nóbrega
Infraestrutura e Banco de Dados
Planae Tecnologia da Informação
(+55) 14 3106-3514
http://www.planae.com.br



  Patrick Vedrines wrote: 
    Hello Gustavo,

    Your question seems to say that you suspect a disk issue, and a few hours later, Simon told me "Sounds like your disks/layout/something is pretty sick".
    To be clear in my own mind about it, I've just copyed (time cp) the "aggregate" table files (4 Gb) from one disk to an another one: it takes 22 mn !(3 Mb/s).
    That seems to demonstrate that Postgres is not the cause of this issue. 
    I've just untrusted to my system engineer the analysis of my disks...

    In case I would have to change my disks, do you have any performance figures related to the types you mentionned (reiserfs vs ext3) ?
    I don't use RAID since the security is not a concern.

    Thank a lot for your help !

    Patrick

      Hi Patrick,

          How is configured your disk array? Do you have a Perc 4?

      Tip: Use reiserfs instead ext3, raid 0+1 and deadline I/O scheduler in kernel linux 2.6

 

view thread (11+ messages)  latest in thread

Message-ID: <013501c5307a$58bea680$1e0baf96@pcpatrickxp>
Permalink:  ../013501c5307a$58bea680$1e0baf96@pcpatrickxp/
Also on:    postgresql.org/message-id/013501c5307a$58bea680$1e0baf96@pcpatrickxp

 · 

reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Reply to all the recipients using the --to and --cc options:
  reply via email

  To: pgsql-performance@postgresql.org
  Cc: patrick.vedrines@adpcl.com, gfnobrega@planae.com.br
  Subject: Re: CPU 0.1% IOWAIT 99% for decisonnal queries
  In-Reply-To: <013501c5307a$58bea680$1e0baf96@pcpatrickxp>

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox