pg.ddx.io  pgsql-performance@postgresql.org mailing list archive  
help / color / mirror / Atom feed
From: Chad Thompson <chad@weblinkservices.com>
To: josh@agliodbs.com
To: pgsql-performance <pgsql-performance@postgresql.org>
Subject: Re: Looking for a cheap upgrade (RAID)
Date: Fri, 2 May 2003 14:53:33 -0600
Message-ID: <0c9a01c310ec$e5605d90$32021aac@chad> (raw)
References: <0c2101c310dc$28e3c090$32021aac@chad>
	<200305021310.46770.josh@agliodbs.com>

Can WAL and the swap partition be on the same drive?

Thanks
Chad
----- Original Message -----
From: "Josh Berkus" <josh@agliodbs.com>
To: "Chad Thompson" <chad@weblinkservices.com>; "pgsql-performance"
<pgsql-performance@postgresql.org>
Sent: Friday, May 02, 2003 2:10 PM
Subject: Re: [PERFORM] Looking for a cheap upgrade (RAID)


Chad,

> I realize that Im a raid on linux newbie so any suggestions are
appreciated.
> Im thinking I want to put this on an IDE Raid array, probably 0+1. IDE
seems
> to be cheap and effective these days.
> What ive been able to glean from other postings is that I should have 3
> drives, 2 for the database w/ striping and another for the WAL.

Well, RAID 0+1 is only relevant if you have more than 2 drives.  Otherwise,
it's just RAID 1 (which is a good choice for PostgreSQL).

More disks is almost always better.  Putting WAL on a seperate (non-RAID)
disk
is usually a very good idea.

> I would also appreciate raid hardware suggestions (brands, etc)
> And as always im not afraid to RTFM if someone can point me to the FM :-)

Use Linux Software RAID.    To get hardware RAID better than Linux Software
RAID, you have to spend $800 or more.


--
-Josh Berkus
 Aglio Database Solutions
 San Francisco




view thread (19+ messages)  latest in thread

Message-ID: <0c9a01c310ec$e5605d90$32021aac@chad>
Permalink:  ../0c9a01c310ec$e5605d90$32021aac@chad/
Also on:    postgresql.org/message-id/0c9a01c310ec$e5605d90$32021aac@chad

 · 

reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Reply to all the recipients from your mail client; the link fills in
  the headers below: reply via email
  Some clients, webmail especially, drop In-Reply-To and References from
  a link, and the reply then starts a new thread: use the mbox below.

  To: pgsql-performance@postgresql.org
  Cc: chad@weblinkservices.com, josh@agliodbs.com
  Subject: Re: Looking for a cheap upgrade (RAID)
  In-Reply-To: <0c9a01c310ec$e5605d90$32021aac@chad>
  References: <0c2101c310dc$28e3c090$32021aac@chad> <200305021310.46770.josh@agliodbs.com> <0c9a01c310ec$e5605d90$32021aac@chad>

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox