From: Cott Lang <cott@internetstaff.com>
To: pgsql-performance@postgresql.org
Subject: Re: software vs hw hard on linux
Date: Sat, 13 Sep 2003 22:40:20 -0700
Message-ID: <1063518020.27300.30.camel@blackbox> (raw)
In-Reply-To: <Pine.BSF.4.44.0309121030450.78908-100000@torgo.978.org>
References: <Pine.BSF.4.44.0309121030450.78908-100000@torgo.978.org>
On Fri, 2003-09-12 at 07:34, Jeff wrote:
> What I'm wondering about is what folks experience with software raid vs
> hardware raid on linux is. A friend of mine ran a set of benchmarks at
> work and found sw raid was running obscenely faster than the mylex and
> (some other brand that isn't 3ware) raids..
I ended up going with a hybrid: RAID-1 across sets of two disks in
hardware on Adaptec ZCR cards, and RAID-0 across the RAID-1s with Linux
software RAID.
Although the ZCR (2010 I believe) supports 0+1, using software striping
turned in better performance for me.
This way, I get brain dead simple dead disk replacement handled by
hardware with some speed from software RAID.
Also, I would think mirroring on the SCSI controller should take traffic
off the PCI bus... <shrug>
I have another machine that's stuck using a Compaq 5i plus controller
with no battery backed write cache, in RAID 5. It sucks. Really bad. I'd
rather use an IDE drive. :)
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Reply to all the recipients from your mail client; the link fills in
the headers below: reply via email
Some clients, webmail especially, drop In-Reply-To and References from
a link, and the reply then starts a new thread: use the mbox below.
To: pgsql-performance@postgresql.org
Cc: cott@internetstaff.com
Subject: Re: software vs hw hard on linux
In-Reply-To: <1063518020.27300.30.camel@blackbox>
References: <Pine.BSF.4.44.0309121030450.78908-100000@torgo.978.org> <1063518020.27300.30.camel@blackbox>
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox