pg.ddx.io  pgsql-performance@postgresql.org mailing list archive  
help / color / mirror / Atom feed
From: Josh Berkus <josh@agliodbs.com>
To: ghaverla@freenet.edmonton.ab.ca
To: Jason Hihn <jhihn@paytimepayroll.com>
Cc: Pgsql-Novice@Postgresql. Org <pgsql-novice@postgresql.org>
Subject: Re: Ideal Hardware?
Date: Wed, 1 Oct 2003 18:10:31 -0700
Message-ID: <200310011810.32006.josh@agliodbs.com> (raw)
In-Reply-To: <Pine.A41.3.95.1031001180900.53904A-100000@fn2.freenet.edmonton.ab.ca>
References: <Pine.A41.3.95.1031001180900.53904A-100000@fn2.freenet.edmonton.ab.ca>

Gord,

> I vaguely remember someone (Tom?) mentioning that one of the log
> files probably might want to go on its own partition. 

That's general knowledge, but not really applicable to a fast RAID system.   
It's more imporant to regular-disk systems; with 4+ disk RAID, nobody has 
been able to demonstrate a gain from having the disk separation.

> fast, rebuilding RAID 1 is a pain in the butt!  My biggest RAID 10
> is about 10 GB, bundling the new partition from the new disk into
> the RAID 0 is fast, rebuilding the mirror (RAID 1 part) takes 10
> hours!  Dual athlon 1.6's and 1 GB of RAM, so I have lots of
> horsepower.  Maybe you are going with better RAID than I have,
> but it seems to me that RAID 5 (with spares) is going to be better
> if you ever have to rebuild.

Also depends on the number of disks, the controller, and the balance of read 
vs. write activity.   I've found RAID 5 with no cache to be dog-slow for OLTP 
(heavy write transaction) databases, and use RAID 1 for that.

-- 
-Josh Berkus
 Aglio Database Solutions
 San Francisco




view thread (4+ messages)

Message-ID: <200310011810.32006.josh@agliodbs.com>
Permalink:  ../200310011810.32006.josh@agliodbs.com/
Also on:    postgresql.org/message-id/200310011810.32006.josh@agliodbs.com

 · 

reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Reply to all the recipients from your mail client; the link fills in
  the headers below: reply via email
  Some clients, webmail especially, drop In-Reply-To and References from
  a link, and the reply then starts a new thread: use the mbox below.

  To: pgsql-performance@postgresql.org
  Cc: josh@agliodbs.com, ghaverla@freenet.edmonton.ab.ca, jhihn@paytimepayroll.com, pgsql-novice@postgresql.org
  Subject: Re: Ideal Hardware?
  In-Reply-To: <200310011810.32006.josh@agliodbs.com>
  References: <Pine.A41.3.95.1031001180900.53904A-100000@fn2.freenet.edmonton.ab.ca> <200310011810.32006.josh@agliodbs.com>

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox