From: Bruce Momjian <bruce@momjian.us>
To: Gregg Jaskiewicz <gryzman@gmail.com>
Cc: Greg Smith <greg@2ndquadrant.com>
Cc: postgres performance list <pgsql-performance@postgresql.org>
Cc: Niels Kristian Schjødt <nielskristian@autouncle.com>
Subject: Re: New server setup
Date: Thu, 14 Mar 2013 14:54:24 -0400
Message-ID: <20130314185424.GA28770@momjian.us> (raw)
In-Reply-To: <CAJY59_jNGwrPceXg8k04=1VWTTZTFTPTh+jGHopx92c+17Cj1w@mail.gmail.com>
References: <4D6D1410-2208-4DAA-BD64-69BE1FD94E55@autouncle.com>
<513CADB7.4030803@2ndQuadrant.com>
<CAJY59_jNGwrPceXg8k04=1VWTTZTFTPTh+jGHopx92c+17Cj1w@mail.gmail.com>
List-Unsubscribe: <mailto:majordomo@postgresql.org?body=unsub%20pgsql-performance>
On Tue, Mar 12, 2013 at 09:41:08PM +0000, Gregg Jaskiewicz wrote:
> On 10 March 2013 15:58, Greg Smith <greg@2ndquadrant.com> wrote:
>
> On 3/1/13 6:43 AM, Niels Kristian Schjødt wrote:
>
> Hi, I'm going to setup a new server for my postgresql database, and I
> am considering one of these: http://www.hetzner.de/hosting/
> produkte_rootserver/poweredge-r720 with four SAS drives in a RAID 10
> array. Has any of you any particular comments/pitfalls/etc. to mention
> on the setup? My application is very write heavy.
>
>
> The Dell PERC H710 (actually a LSI controller) works fine for write-heavy
> workloads on a RAID 10, as long as you order it with a battery backup unit
> module. Someone must install the controller management utility and do
> three things however:
>
>
> We're going to go with either HP or IBM (customer's preference, etc).
>
>
>
> 1) Make sure the battery-backup unit is working.
>
> 2) Configure the controller so that the *disk* write cache is off.
Only use SSDs with a BBU cache, and don't set SSD caches to
write-through because an SSD needs to cache the write to avoid wearing
out the chips early, see:
http://momjian.us/main/blogs/pgblog/2012.html#August_3_2012
--
Bruce Momjian <bruce@momjian.us> http://momjian.us
EnterpriseDB http://enterprisedb.com
+ It's impossible for everything to be true. +
--
Sent via pgsql-performance mailing list (pgsql-performance@postgresql.org)
To make changes to your subscription:
http://www.postgresql.org/mailpref/pgsql-performance
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Reply to all the recipients from your mail client; the link fills in
the headers below: reply via email
Some clients, webmail especially, drop In-Reply-To and References from
a link, and the reply then starts a new thread: use the mbox below.
To: pgsql-performance@postgresql.org
Cc: bruce@momjian.us, gryzman@gmail.com, greg@2ndquadrant.com, nielskristian@autouncle.com
Subject: Re: New server setup
In-Reply-To: <20130314185424.GA28770@momjian.us>
References: <4D6D1410-2208-4DAA-BD64-69BE1FD94E55@autouncle.com> <513CADB7.4030803@2ndQuadrant.com> <CAJY59_jNGwrPceXg8k04=1VWTTZTFTPTh+jGHopx92c+17Cj1w@mail.gmail.com> <20130314185424.GA28770@momjian.us>
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox