From: Alex Turner <armtuk@gmail.com>
To: Benjamin Arai <barai@cs.ucr.edu>
Cc: Luke Lonergan <LLonergan@greenplum.com>
Cc: pgsql-performance@postgresql.org
Subject: Re: What's the best hardver for PostgreSQL 8.1?
Date: Mon, 26 Dec 2005 17:54:54 -0500
Message-ID: <33c6269f0512261454p3ac8a251w6071bc1cac0a7a8e@mail.gmail.com> (raw)
In-Reply-To: <43B034B6.7070708@cs.ucr.edu>
References: <3E37B936B592014B978C4415F90D662D01F1B59F@MI8NYCMAIL06.Mi8.com>
<43AFB641.6070009@cs.ucr.edu>
<3E37B936B592014B978C4415F90D662D01F47553@MI8NYCMAIL06.Mi8.com>
<43B034B6.7070708@cs.ucr.edu>
Yes - they work excellently. I have several medium and large servers
running 3ware 9500S series cards with great success. We have
rebuilding many failed RAID 10s over the course with no problems.
Alex
On 12/26/05, Benjamin Arai <barai@cs.ucr.edu> wrote:
> Have you have any experience rebuilding arrays in linux using the 3Ware
> utilities? If so, did it work well?
>
>
> Luke Lonergan wrote:
> Benjamin,
>
>
>
> Have you done any benchmarking of the 9550SX against a software raid
> configuration?
>
>
> Interesting - no, not on SATA, mostly because I've had awful luck with Linux
> drivers and SATA. The popular manufacturers of SATA to PCI bridge chipsets
> are Silicon Image and Highpoint, and I've not seen Linux work with them at
> any reasonable performance yet. I've also had problems with Adaptec's cards
> - I think they manufacture their own SATA to PCI chipset as well. So far,
> I've only had good luck with the on-chipset Intel SATA implementation. I
> think the problems I've had could be entirely driver-related, but in the end
> it doesn't matter if you can't find drivers that work for Linux.
>
> The other problem is getting enough SATA connections for the number of disks
> we want. I do have two new Areca SATA RAID cards and I'm going to benchmark
> those against the 3Ware 9550SX with 2 x 8 = 16 disks on one host.
>
> I guess we could run the HW RAID controllers in JBOD mode to get a good
> driver / chipset configuration for software RAID, but frankly I prefer HW
> RAID if it performs well. So far the SATA host-based RAID is blowing the
> doors off of every other HW RAID solution I've tested.
>
> - Luke
>
>
>
>
> --
> Benjamin Arai
> barai@cs.ucr.edu
> http://www.benjaminarai.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Reply to all the recipients from your mail client; the link fills in
the headers below: reply via email
Some clients, webmail especially, drop In-Reply-To and References from
a link, and the reply then starts a new thread: use the mbox below.
To: pgsql-performance@postgresql.org
Cc: armtuk@gmail.com, barai@cs.ucr.edu, LLonergan@greenplum.com
Subject: Re: What's the best hardver for PostgreSQL 8.1?
In-Reply-To: <33c6269f0512261454p3ac8a251w6071bc1cac0a7a8e@mail.gmail.com>
References: <3E37B936B592014B978C4415F90D662D01F1B59F@MI8NYCMAIL06.Mi8.com> <43AFB641.6070009@cs.ucr.edu> <3E37B936B592014B978C4415F90D662D01F47553@MI8NYCMAIL06.Mi8.com> <43B034B6.7070708@cs.ucr.edu> <33c6269f0512261454p3ac8a251w6071bc1cac0a7a8e@mail.gmail.com>
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox