pg.ddx.io  pgsql-performance@postgresql.org mailing list archive  
help / color / mirror / Atom feed
From: Andreas Pflug <Andreas.Pflug@web.de>
To: pgsql-performance@postgresql.org
Subject: Re: how to configure my new server
Date: Sat, 08 Feb 2003 00:21:47 +0100
Message-ID: <3E443F8B.4030301@web.de> (raw)
In-Reply-To: <Pine.LNX.4.33.0302071354460.14360-100000@css120.ihs.com>
References: <Pine.LNX.4.33.0302071354460.14360-100000@css120.ihs.com>

scott.marlowe wrote:

>The problem was that all three drives were good.  He moved the server, 
>cable came half off, the card marked the drives as bad, and wouldn't 
>accept them back until it had formatted them.  This wasn't the first time 
>I'd seen this kind of problem with RAID controllers either, as it had 
>happened to me in testing one a few years earlier.  Which is one of the 
>many life experiences that makes me like backups so much.  
>
>  
>
Ok, had this  kind of problems too. Everytime you stop and start a 
server, rest a second and say a little prayer :-) 80 % of HDs I've seen 
dying didn't start again after a regular maintenance power down. Or a 
controller finds some disk to be faulty for some nonreproduceable 
reason, until you kick the disk out of the array and rebuild it. Bad 
surprise, if TWO disks are considered bad. Stop and start again, and say 
a real GOOD prayer, then get out the backup tape...

I had this especially with Adaptec controllers. I had to learn they 
cannot build reliable RAID, and they don't know what maintenance of 
products is either (three generations of AAA controllers in two years, 
all being incompatible, only partial supported for new OS. I'm cured!) 
Some years ago they bought PMD, which is a lot better.

Andreas




view thread (27+ messages)  latest in thread

Message-ID: <3E443F8B.4030301@web.de>
Permalink:  ../3E443F8B.4030301@web.de/
Also on:    postgresql.org/message-id/3E443F8B.4030301@web.de

 · 

reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Reply to all the recipients from your mail client; the link fills in
  the headers below: reply via email
  Some clients, webmail especially, drop In-Reply-To and References from
  a link, and the reply then starts a new thread: use the mbox below.

  To: pgsql-performance@postgresql.org
  Cc: Andreas.Pflug@web.de
  Subject: Re: how to configure my new server
  In-Reply-To: <3E443F8B.4030301@web.de>
  References: <Pine.LNX.4.33.0302071354460.14360-100000@css120.ihs.com> <3E443F8B.4030301@web.de>

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox