pg.ddx.io  pgsql-performance@postgresql.org mailing list archive  
help / color / mirror / Atom feed
From: Joe Conway <mail@joeconway.com>
To: Adam Witney <awitney@sghms.ac.uk>
Cc: pgsql-performance <pgsql-performance@postgresql.org>
Subject: Re: Hardware performance
Date: Thu, 17 Jul 2003 09:29:18 -0700
Message-ID: <3F16CEDE.2070807@joeconway.com> (raw)
In-Reply-To: <BB3C7D5A.2009C%awitney@sghms.ac.uk>
References: <BB3C7D5A.2009C%awitney@sghms.ac.uk>

Adam Witney wrote:
> Actually I am going through the same questions myself at the moment.... I
> would like to have a 2 disk RAID1 and a 4 disk RAID5, so need at least 6
> disks....
> 
> Anybody have any suggestions or experience with other hardware manufacturers
> for this size of setup? (2U rack, up to 6 disks, 2 processors, ~2GB RAM, if
> possible)

I tend to use either 1U or 4U servers, depending on the application. But 
I've had good experiences with IBM recently, and a quick look on their 
site shows the x345 with these specs:

•  2U, 2-way server delivers extreme performance and availability for 
demanding applications
•  Up to 2 Intel Xeon processors up to 3.06GHz with 533MHz front-side 
bus speed for outstanding performance
•  Features up to 8GB of DDR memory, 5 PCI (4 PCI-X) slots and up to 6 
hard disk drives for robust expansion
•  Hot-swap redundant cooling, power and hard disk drives for high 
availability
•  Integrated dual Ultra320 SCSI with RAID-1 for data protection

This may not wrap well, but here is the url:
http://www-132.ibm.com/webapp/wcs/stores/servlet/CategoryDisplay?catalogId=-840&storeId=1&ca...

Handles 6 drives; maybe that fits the bill?

Joe




view thread (20+ messages)  latest in thread

Message-ID: <3F16CEDE.2070807@joeconway.com>
Permalink:  ../3F16CEDE.2070807@joeconway.com/
Also on:    postgresql.org/message-id/3F16CEDE.2070807@joeconway.com

 · 

reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Reply to all the recipients from your mail client; the link fills in
  the headers below: reply via email
  Some clients, webmail especially, drop In-Reply-To and References from
  a link, and the reply then starts a new thread: use the mbox below.

  To: pgsql-performance@postgresql.org
  Cc: mail@joeconway.com, awitney@sghms.ac.uk
  Subject: Re: Hardware performance
  In-Reply-To: <3F16CEDE.2070807@joeconway.com>
  References: <BB3C7D5A.2009C%awitney@sghms.ac.uk> <3F16CEDE.2070807@joeconway.com>

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox