pg.ddx.io  pgsql-performance@postgresql.org mailing list archive  
help / color / mirror / Atom feed
From: Dave Cramer <pg@fastcrypt.com>
To: amrit@health2.moph.go.th
Cc: PGsql-performance <pgsql-performance@postgresql.org>
Subject: Re: Low Performance for big hospital server ..
Date: Mon, 03 Jan 2005 19:57:20 -0500
Message-ID: <41D9E9F0.2060905@fastcrypt.com> (raw)
In-Reply-To: <1104766805.41d96755a40d9@webmail.moph.go.th>
References: <1104634472.41d762681b548@webmail.moph.go.th>
	<20050102140828.GA21826@pobox.com>
	<1104683293.41d8211d62221@webmail.moph.go.th>
	<41D827C1.3050707@fastcrypt.com>
	<1104717243.41d8a5bb9cb9b@webmail.moph.go.th>
	<41D9525D.3000409@fastcrypt.com>
	<1104766805.41d96755a40d9@webmail.moph.go.th>



amrit@health2.moph.go.th wrote:

>>I realize you may be stuck with 7.3.x but you should be aware that 7.4
>>is considerably faster, and 8.0 appears to be even faster yet.
>>    
>>
>
>There are a little bit incompatibility between 7.3 -8 , so rather difficult to
>change.
>
>  
>
>>I would seriously consider upgrading, if at all possible.
>>
>>A few more hints.
>>
>>Random page cost is quite conservative if you have reasonably fast disks.
>>Speaking of fast disks, not all disks are created equal, some RAID
>>drives are quite slow (Bonnie++ is your friend here)
>>
>>Sort memory can be set on a per query basis, I'd consider lowering it
>>quite low and only increasing it when necessary.
>>
>>Which brings us to how to find out when it is necessary.
>>Turn logging on and turn on log_pid, and log_duration, then you will
>>need to sort through the logs to find the slow queries.
>>    
>>
>
>In standard RH 9.0 , if I enable both of the log [pid , duration] , where could
>I look for the result of the log, and would it make the system to be slower?
>  
>
On a redhat system logging is more or less disabled if you used the rpm

you can set syslog=2 in the postgresql.conf and then you will get the 
logs in messages.log
Yes, it will make it slower, but you have to find out which queries are 
slow.

Dave

>
>Amrit
>Thailand
>
>
>---------------------------(end of broadcast)---------------------------
>TIP 5: Have you checked our extensive FAQ?
>
>               http://www.postgresql.org/docs/faqs/FAQ.html
>
>
>  
>

-- 
Dave Cramer
http://www.postgresintl.com
519 939 0336
ICQ#14675561




view thread (38+ messages)  latest in thread

Message-ID: <41D9E9F0.2060905@fastcrypt.com>
Permalink:  ../41D9E9F0.2060905@fastcrypt.com/
Also on:    postgresql.org/message-id/41D9E9F0.2060905@fastcrypt.com

 · 

reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Reply to all the recipients using the --to and --cc options:
  reply via email

  To: pgsql-performance@postgresql.org
  Cc: pg@fastcrypt.com, amrit@health2.moph.go.th
  Subject: Re: Low Performance for big hospital server ..
  In-Reply-To: <41D9E9F0.2060905@fastcrypt.com>

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox