From: Arjen van der Meijden <acmmailing@tweakers.net>
To: Jeff Frost <jeff@frostconsultingllc.com>
Cc: Bucky Jordan <bjordan@lumeta.com>
Cc: Joshua D. Drake <jd@commandprompt.com>
Cc: Luke Lonergan <llonergan@greenplum.com>
Cc: pgsql-performance@postgresql.org
Subject: Re: availability of SATA vendors
Date: Wed, 22 Nov 2006 18:07:17 +0100
Message-ID: <456483C5.1060804@tweakers.net> (raw)
In-Reply-To: <Pine.LNX.4.64.0611220834400.4382@discord.home.frostconsultingllc.com>
References: <78ED28FACE63744386D68D8A9D1CF5D420A080@MAIL.corp.lumeta.com>
<Pine.LNX.4.64.0611220834400.4382@discord.home.frostconsultingllc.com>
Jeff,
You can find some (Dutch) results here on our website:
http://tweakers.net/reviews/647/5
You'll find the AMCC/3ware 9550SX-12 with up to 12 disks, Areca 1280 and
1160 with up to 14 disks and a Promise and LSI sata-raid controller with
each up to 8 disks. Btw, that Dell Perc5 (sas) is afaik not the same
card as the LSI MegaRAID SATA 300-8X, but I have no idea whether they
share the same controllerchip.
In most of the graphs you also see a Areca 1160 with 1GB in stead of its
default 256MB. Hover over the labels to see only that specific line,
that makes the graphs quite readable.
You'll also see a Dell Perc5/e in the results, but that was done using
Fujitsu SAS 15k rpm drives, not the WD Raptor 10k rpm's
If you dive deeper in our (still Dutch) "benchmark database" you may
find some results of several disk-configurations on several controllers
in various storage related tests, like here:
http://tweakers.net/benchdb/test/193
If you want to filter some results, look for "Resultaatfilter &
tabelgenerator" and press on the "Toon filteropties"-tekst. I think
you'll be able to understand the selection-overview there, even if you
don't understand Dutch ;)
"Filter resultaten" below means the same as in English (filter [the]
results)
Best regards,
Arjen
On 22-11-2006 17:36 Jeff Frost wrote:
> On Wed, 22 Nov 2006, Bucky Jordan wrote:
>
>> Dells (at least the 1950 and 2950) come with the Perc5, which is
>> basically just the LSI MegaRAID. The units I have come with a 256MB BBU,
>> I'm not sure if it's upgradeable, but it looks like a standard DIMM in
>> there...
>>
>> I posted some dd and bonnie++ benchmarks of a 6-disk setup a while back
>> on a 2950, so you might search the archive for those numbers if you're
>> interested- you should be able to get the same or better from a
>> similarly equipped LSI setup. I don't recall if I posted pgbench
>> numbers, but I can if that's of interest.
>
> I could only find the 6 disk RAID5 numbers in the archives that were run
> with bonnie++1.03. Have you run the RAID10 tests since? Did you settle
> on 6 disk RAID5 or 2xRAID1 + 4XRAID10?
>
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Reply to all the recipients using the --to and --cc options:
reply via email
To: pgsql-performance@postgresql.org
Cc: acmmailing@tweakers.net, jeff@frostconsultingllc.com, bjordan@lumeta.com, jd@commandprompt.com, llonergan@greenplum.com
Subject: Re: availability of SATA vendors
In-Reply-To: <456483C5.1060804@tweakers.net>
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox