pg.ddx.io  pgsql-performance@postgresql.org mailing list archive  

help / color / mirror / Atom feed

From: Mark Kirkwood <mark.kirkwood@catalyst.net.nz>
To: Grzegorz Jaśkiewicz <gryzman@gmail.com>
Cc: postgres performance list <pgsql-performance@postgresql.org>
Subject: Re: serveRAID M5014 SAS
Date: Thu, 26 May 2011 10:24:59 +1200
Message-ID: <4DDD81BB.4080801@catalyst.net.nz> (raw)
In-Reply-To: <BANLkTi=fE2YCS0Lra42ei1hFrKqXdVk2jA@mail.gmail.com>
References: <BANLkTi=fE2YCS0Lra42ei1hFrKqXdVk2jA@mail.gmail.com>

On 25/05/11 19:33, Grzegorz Jaśkiewicz wrote:
> Does anyone here have any bad experiences with the RAID card in subject ?
> This is in an IBM server, with 2.5" 10k drives.
>
> But we seem to observe its poor performance in other configurations as
> well (with different drives, different settings) in comparison with -
> say, what dell provides.
>
>
>

Interestingly enough, I've been benchmarking a M5015 SAS, with the 
optional wee cable for enabling the battery backup for the 512MB of 
cache. With a 6 disk raid 10 + 2 disk raid 1 - with the array settings 
NORA+DIRECT, and writeback enabled we're seeing quite good pgbench 
performance (12 cores + 48G ram, Ubuntu 10.04 with xfs):

scale 2500 db with 48 clients, 10 minute runs: 2300 tps
scale   500 db with 24 clients, 10 minute runs: 6050 tps

I did notice that the sequential performance was quite lackluster (using 
bonnie) - but are not too concerned about that for the use case (could 
probably fix using blockdev --setra).

I'm guessing that even tho your M5014 card comes with less ram (256M I 
think), if you can enable the battery backup and cache writes it should 
be quite good. Also I think the amount of ram on the card is upgradable 
(4G is the max for the M5105 I *think* - can't find the right doc to 
check this ATM sorry).

Cheers

Mark

view thread (16+ messages)  latest in thread

Message-ID: <4DDD81BB.4080801@catalyst.net.nz>
Permalink:  ../4DDD81BB.4080801@catalyst.net.nz/
Also on:    postgresql.org/message-id/4DDD81BB.4080801@catalyst.net.nz

copy link · copy postgr.es

reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Reply to all the recipients using the --to and --cc options:
  reply via email

  To: pgsql-performance@postgresql.org
  Cc: mark.kirkwood@catalyst.net.nz, gryzman@gmail.com
  Subject: Re: serveRAID M5014 SAS
  In-Reply-To: <4DDD81BB.4080801@catalyst.net.nz>

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox