From: Matthew Hall <mhall@mhcomputing.net>
To: Jeff Janes <jeff.janes@gmail.com>
Cc: pgsql-performance@lists.postgresql.org
Subject: Re: insert and query performance on big string table with pg_trgm
Date: Tue, 21 Nov 2017 00:05:09 -0800
Message-ID: <56B84857-06EA-4534-A13F-F7AA3B924446@mhcomputing.net> (raw)
In-Reply-To: <CAMkU=1yPVyiyyXOxDyDCA18zqaorkoZrfns-2CZXvGi5uZw8xQ@mail.gmail.com>
References: <F5E9C927-1F84-488B-BD02-01DAFDD369D9@mhcomputing.net>
<CAMkU=1yPVyiyyXOxDyDCA18zqaorkoZrfns-2CZXvGi5uZw8xQ@mail.gmail.com>
Hi Jeff,
Thanks so much for writing. You've got some great points.
> On Nov 20, 2017, at 5:42 PM, Jeff Janes <jeff.janes@gmail.com> wrote:
> While I have not done exhaustive testing, from the tests I have done I've never found gist to be better than gin with trgm indexes.
Thanks, this helps considerably, as the documentation was kind of confusing and I didn't want to get it wrong if I could avoid it.
> Do you really need the artificial primary key, when you already have another column that would be used as the primary key? If you need to use this it a foreign key in another type, then very well might. But maintaining two unique indexes doesn't come free.
OK, fair enough, I'll test with it removed and see what happens.
> Are all indexes present at the time you insert? It will probably be much faster to insert without the gin index (at least) and build it after the load.
There is some flexibility on the initial load, but the updates in the future will require the de-duplication capability. I'm willing to accept that might be somewhat slower on the load process, to get the accurate updates, provided we could try meeting the read-side goal I wrote about, or at least figure out why it's impossible, so I can understand what I need to fix to make it possible.
> Without knowing this key fact, it is hard to interpret the rest of your data.
I'm assuming you're referring to the part about the need for the primary key, and the indexes during loading? I did try to describe that in the earlier mail, but obviously I'm new at writing these, so sorry if I didn't make it more clear. I can get rid of the bigserial PK and the indexes could be made separately, but I would need a way to de-duplicate on future reloading... that's why I had the ON CONFLICT DO NOTHING expression on the INSERT. So we'd still want to learn why the INSERT is slow to fix up the update processes that would happen in the future.
> * maintenance_work_mem 512 MB
>
> Building a gin index in bulk could benefit from more memory here.
Fixed it; I will re-test w/ 1 GB. Have you got any recommended values so I don't screw it up?
> * synchronous_commit off
>
> If you already are using unlogged tables, this might not be so helpful, but does increase the risk of the rest of your system.
Fixed it; the unlogged mode change came later than this did.
> PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
> 29578 postgres 20 0 6575672 6.149g 6.139g R 86.0 39.7 45:24.97 postgres
>
> You should expand the command line (by hitting 'c', at least in my version of top) so we can see which postgres process this is.
Good point, I'll write back once I retry w/ your other advice.
> explain (analyze, buffers), please. And hopefully with track_io_timing=on.
track_io_timing was missing because sadly I had only found it in one document at the very end of the investigation, after doing the big job which generated all of the material posted. It's there now, so here is some better output on the query:
explain (analyze, buffers) select * from huge_table where value ilike '%canada%';
Bitmap Heap Scan on huge_table (cost=273.44..61690.09 rows=16702 width=33) (actual time=5701.511..76469.688 rows=110166 loops=1)
Recheck Cond: ((value)::text ~~* '%canada%'::text)
Rows Removed by Index Recheck: 198
Heap Blocks: exact=66657
Buffers: shared hit=12372 read=56201 dirtied=36906
I/O Timings: read=74195.734
-> Bitmap Index Scan on huge_table_value_trgm (cost=0.00..269.26 rows=16702 width=0) (actual time=5683.032..5683.032 rows=110468 loops=1)
Index Cond: ((value)::text ~~* '%canada%'::text)
Buffers: shared hit=888 read=1028
I/O Timings: read=5470.839
Planning time: 0.271 ms
Execution time: 76506.949 ms
I will work some more on the insert piece.
> If you repeat the same query, is it then faster, or is it still slow?
If you keep the expression exactly the same, it still takes a few seconds as could be expected for such a torture test query, but it's still WAY faster than the first such query. If you change it out to a different expression, it's longer again of course. There does seem to be a low-to-medium correlation between the number of rows found and the query completion time.
> Cheers,
> Jeff
Thanks,
Matthew.
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Reply to all the recipients using the --to and --cc options:
reply via email
To: pgsql-performance@postgresql.org
Cc: mhall@mhcomputing.net, jeff.janes@gmail.com, pgsql-performance@lists.postgresql.org
Subject: Re: insert and query performance on big string table with pg_trgm
In-Reply-To: <56B84857-06EA-4534-A13F-F7AA3B924446@mhcomputing.net>
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox