From: Steve Poe <steve.poe@gmail.com>
To: Luke Lonergan <LLonergan@greenplum.com>
Cc: Alex Turner <armtuk@gmail.com>
Cc: pgsql-performance@postgresql.org
Subject: Re: Postgresql Performance on an HP DL385 and
Date: Tue, 8 Aug 2006 08:01:47 -0700
Message-ID: <721b21dc0608080801l5fb6534ey7094774ff79a323b@mail.gmail.com> (raw)
In-Reply-To: <3E37B936B592014B978C4415F90D662D03EA1F78@MI8NYCMAIL06.Mi8.com>
References: <3E37B936B592014B978C4415F90D662D03EA1F78@MI8NYCMAIL06.Mi8.com>
Luke,
Thanks for the feedback. I use the same database test that I've run a Sun
dual Opteron with 4Gb RAM and (2) four disk arrays in RAID10. The sun box
with one disc on an LSI MegaRAID 2-channel adapter outperforms this HP box.
I though I was doing something wrong or there is something wrong with the
box.
Steve
On 8/8/06, Luke Lonergan <LLonergan@greenplum.com> wrote:
>
> I agree, I think these say you are getting 240MB/s sequential reads and
> 1000 seeks per second.
>
> That's pretty much the best you'd expect.
>
> - Luke
>
> Sent from my GoodLink synchronized handheld (www.good.com)
>
>
> -----Original Message-----
> From: Alex Turner [mailto:armtuk@gmail.com]
> Sent: Tuesday, August 08, 2006 02:40 AM Eastern Standard Time
> To: steve.poe@gmail.com
> Cc: Luke Lonergan; pgsql-performance@postgresql.org
> Subject: Re: [PERFORM] Postgresql Performance on an HP DL385 and
>
> These number are pretty darn good for a four disk RAID 10, pretty close to
> perfect infact. Nice advert for the 642 - I guess we have a Hardware RAID
> controller than will read indpendently from mirrors.
>
> Alex
>
> On 8/8/06, Steve Poe <steve.poe@gmail.com> wrote:
> >
> > Luke,
> >
> > Here are the results of two runs of 16GB file tests on XFS.
> >
> > scsi disc array
> > xfs ,16G,81024,99,153016,24,73422,10,82092,97,243210,17,1043.1
> > ,0,16,3172,7,+++++,+++,2957,9,3197,10,+++++,+++,2484,8
> > scsi disc array
> > xfs ,16G,83320,99,155641,25,73662,10,81756,96,243352,18,1029.1
> > ,0,16,3119,10,+++++,+++,2789,7,3263,11,+++++,+++,2014,6
> >
> > Thanks.
> >
> > Steve
> >
> >
> >
> > > Can you run bonnie++ version 1.03a on the machine and report the
> results
> > > here?
> > >
> > > It could be OK if you have the latest Linux driver for cciss, someone
> > has
> > > reported good results to this list with the latest, bleeding edge
> > version of
> > > Linux (2.6.17).
> > >
> > > - Luke
> > >
> >
> >
> > >
> > >
> > > ---------------------------(end of
> broadcast)---------------------------
> > > TIP 9: In versions below 8.0, the planner will ignore your desire to
> > > choose an index scan if your joining column's datatypes do not
> > > match
> >
> >
> > ---------------------------(end of broadcast)---------------------------
> > TIP 3: Have you checked our extensive FAQ?
> >
> > http://www.postgresql.org/docs/faq
> >
>
>
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Reply to all the recipients from your mail client; the link fills in
the headers below: reply via email
Some clients, webmail especially, drop In-Reply-To and References from
a link, and the reply then starts a new thread: use the mbox below.
To: pgsql-performance@postgresql.org
Cc: steve.poe@gmail.com, LLonergan@greenplum.com, armtuk@gmail.com
Subject: Re: Postgresql Performance on an HP DL385 and
In-Reply-To: <721b21dc0608080801l5fb6534ey7094774ff79a323b@mail.gmail.com>
References: <3E37B936B592014B978C4415F90D662D03EA1F78@MI8NYCMAIL06.Mi8.com> <721b21dc0608080801l5fb6534ey7094774ff79a323b@mail.gmail.com>
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox