pg.ddx.io  pgsql-performance@postgresql.org mailing list archive  
help / color / mirror / Atom feed
From: Michael Mattox <michael.mattox@verideon.com>
To: Howard Oblowitz <HowardO@LEWIS-STORES.com>
To: pgsql-performance@postgresql.org
Subject: Re: Version 7 question
Date: Tue, 1 Jul 2003 15:55:22 +0200
Message-ID: <CJEBLDCHAADCLAGIGCOOKEOMCKAA.michael.mattox@verideon.com> (raw)
In-Reply-To: <EFF9ABB64B24D511A75C0002A5512D5C01A03A75@LEWEXCH>

My understanding is to use as much effect cache as possible, so figure out
how much ram you need for your other applications & OS and then give the
rest to postgres as effective cache.

What I learned to day is the shared_buffers 25% of RAM guideline.

Michael

> -----Original Message-----
> From: pgsql-performance-owner@postgresql.org
> [mailto:pgsql-performance-owner@postgresql.org]On Behalf Of Howard
> Oblowitz
> Sent: Tuesday, July 01, 2003 3:06 PM
> To: pgsql-performance@postgresql.org
> Subject: FW: [PERFORM] Version 7 question
>
>
> What would be the best value range for effective_cache_size
> on Postgres 7.3.2, assuming say 1.5 GB of RAM and
> shared_buffers set to 8192, and shmmax set to 750mb?
>
> And what are the most important factors one should take
> into account in determining the value?
>
>
>
> > -----Original Message-----
> > From:	scott.marlowe [SMTP:scott.marlowe@ihs.com]
> > Sent:	01 July 2003 02:56
> > To:	Michael Mattox
> > Cc:	Hilary Forbes; pgsql-performance@postgresql.org
> > Subject:	Re: [PERFORM] Version 7 question
> >
> > 8192 is only 64 megs of RAM, not much, but a good number.  Keep in mind
> > that the kernel tends to be better at buffering huge amounts of disk,
> > while postgresql is better left to use buffers that are large
> enough for
> > the current working set (i.e. not your whole database, just the largest
> > amount of data you're slinging about on a regular basis in one query.)
> >
> > On a machine with 1.5 gig of RAM, I've found settings as high as 32768
> > (256 megs of ram) to run well, but anything over that doesn't help.  Of
> > course, we don't toss around more than a hundred meg or so at a
> time.   If
> >
> > our result sets were in the gigabyte range, I'd A: want more
> memory and B:
> >
> > Give more of it to postgresql.
> >
> > The original poster was, I believe running 7.0.x, which is way
> old, so no,
> >
> > I don't think there was an equivalent of effective_cache_size in that
> > version.  Upgrading would be far easier than performance tuning
> 7.0. since
> >
> > the query planner was much simpler (i.e. more prone to make bad
> decisions)
> >
> > in 7.0.
> >
> > On Tue, 1 Jul 2003, Michael Mattox wrote:
> >
> > > I have my shared buffers at 8192 and my effective cache at
> 64000 (which
> > is
> > > 500 megs).  Depends a lot on how much RAM you have.  I have
> 1.5 gigs and
> > > I've been asking my boss for another 512megs for over a month now.  I
> > have
> > > no idea if my buffers are too high/low.
> > >
> > > Michael
> > >
> > > > -----Original Message-----
> > > > From: pgsql-performance-owner@postgresql.org
> > > > [mailto:pgsql-performance-owner@postgresql.org]On Behalf Of Hilary
> > > > Forbes
> > > > Sent: Tuesday, July 01, 2003 2:10 PM
> > > > To: pgsql-performance@postgresql.org
> > > > Subject: [PERFORM] Version 7 question
> > > >
> > > >
> > > > I'm just trying to improve performance on version 7 before doing
> > > > some tests and hopefully upgrading to 7.3.
> > > >
> > > > At the moment we have
> > > > B=64  (no  of shared buffers)
> > > > N=32 (no of connections)
> > > > in postmaster.opt which I take it is the equivalent of the new
> > > > postgresql.conf file.
> > > >
> > > >  From all that is being written about later versions I suspect
> > > > that this is far too low.  Would I be fairly safe in making the
> > > > no of shared buffers larger?  Also is there an equivalent of
> > > > effective_cache_size that I can set for version 7?
> > > >
> > > > Many thanks in advance
> > > > Hilary
> > > >
> > > >
> > > >
> > > >
> > > > Hilary Forbes
> > > > -------------
> > > > DMR Computer Limited:   http://www.dmr.co.uk/
> > > > Direct line:  01689 889950
> > > > Switchboard:  (44) 1689 860000  Fax: (44) 1689 860330
> > > > E-mail:  hforbes@dmr.co.uk
> > > >
> > > > **********************************************************
> > > >
> > > >
> > > > ---------------------------(end of
> > broadcast)---------------------------
> > > > TIP 5: Have you checked our extensive FAQ?
> > > >
> > > >                http://www.postgresql.org/docs/faqs/FAQ.html
> > > >
> > >
> > >
> > >
> > > ---------------------------(end of
> broadcast)---------------------------
> > > TIP 5: Have you checked our extensive FAQ?
> > >
> > >                http://www.postgresql.org/docs/faqs/FAQ.html
> > >
> >
> >
> > ---------------------------(end of broadcast)---------------------------
> > TIP 6: Have you searched our list archives?
> >
> >                http://archives.postgresql.org
>
> ---------------------------(end of broadcast)---------------------------
> TIP 2: you can get off all lists at once with the unregister command
>     (send "unregister YourEmailAddressHere" to majordomo@postgresql.org)
>





view thread (12+ messages)  latest in thread

Message-ID: <CJEBLDCHAADCLAGIGCOOKEOMCKAA.michael.mattox@verideon.com>
Permalink:  ../CJEBLDCHAADCLAGIGCOOKEOMCKAA.michael.mattox@verideon.com/
Also on:    postgresql.org/message-id/CJEBLDCHAADCLAGIGCOOKEOMCKAA.michael.mattox@verideon.com

 · 

reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Reply to all the recipients from your mail client; the link fills in
  the headers below: reply via email
  Some clients, webmail especially, drop In-Reply-To and References from
  a link, and the reply then starts a new thread: use the mbox below.

  To: pgsql-performance@postgresql.org
  Cc: michael.mattox@verideon.com, HowardO@LEWIS-STORES.com
  Subject: Re: Version 7 question
  In-Reply-To: <CJEBLDCHAADCLAGIGCOOKEOMCKAA.michael.mattox@verideon.com>
  References: <EFF9ABB64B24D511A75C0002A5512D5C01A03A75@LEWEXCH> <CJEBLDCHAADCLAGIGCOOKEOMCKAA.michael.mattox@verideon.com>

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox