pg.ddx.io  pgsql-performance@postgresql.org mailing list archive  
help / color / mirror / Atom feed
From: Scott Marlowe <scott.marlowe@gmail.com>
To: Francisco Reyes <lists@stringsutils.com>
Cc: Pgsql performance <pgsql-performance@postgresql.org>
Subject: Re: 10K vs 15k rpm for analytics
Date: Tue, 2 Mar 2010 14:12:12 -0700
Message-ID: <dcc563d11003021312k57e9c558n177e10ad16ab32b1@mail.gmail.com> (raw)
In-Reply-To: <cone.1267562557.293175.32557.1000@shelca>
References: <cone.1267562557.293175.32557.1000@shelca>

On Tue, Mar 2, 2010 at 1:42 PM, Francisco Reyes <lists@stringsutils.com> wrote:
> Anyone has any experience doing analytics with postgres. In particular if
> 10K rpm drives are good enough vs using 15K rpm, over 24 drives. Price
> difference is $3,000.
>
> Rarely ever have more than 2 or 3 connections to the machine.
>
> So far from what I have seen throughput is more important than TPS for the
> queries we do. Usually we end up doing sequential scans to do
> summaries/aggregates.

Then the real thing to compare is the speed of the drives for
throughput not rpm.  Using older 15k drives would actually be slower
than some more modern 10k or even 7.2k drives.

Another issue would be whether or not to short stroke the drives.  You
may find that short stroked 10k drives provide the same throughput for
much less money.  The 10krpm 2.5" ultrastar C10K300 drives have a
throughput numbers of 143 to 88 Meg/sec, which is quite respectable,
and you can put 24 into a 2U supermicro case and save rack space too.
The 15k 2.5" ultrastar c15k147 drives are 159 to 116, only a bit
faster.  And if short stroked the 10k drives should be competitive.



view thread (47+ messages)  latest in thread

Message-ID: <dcc563d11003021312k57e9c558n177e10ad16ab32b1@mail.gmail.com>
Permalink:  ../dcc563d11003021312k57e9c558n177e10ad16ab32b1@mail.gmail.com/
Also on:    postgresql.org/message-id/dcc563d11003021312k57e9c558n177e10ad16ab32b1@mail.gmail.com

 · 

reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Reply to all the recipients from your mail client; the link fills in
  the headers below: reply via email
  Some clients, webmail especially, drop In-Reply-To and References from
  a link, and the reply then starts a new thread: use the mbox below.

  To: pgsql-performance@postgresql.org
  Cc: scott.marlowe@gmail.com, lists@stringsutils.com
  Subject: Re: 10K vs 15k rpm for analytics
  In-Reply-To: <dcc563d11003021312k57e9c558n177e10ad16ab32b1@mail.gmail.com>
  References: <cone.1267562557.293175.32557.1000@shelca> <dcc563d11003021312k57e9c558n177e10ad16ab32b1@mail.gmail.com>

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox