pg.ddx.io pgsql-sql@postgresql.org mailing list archive
help / color / mirror / Atom feedhi
18+ messages / 16 participants
[nested] [flat]
* hi
@ 2002-10-16 03:11 =?gb2312?q?lz=20John?= <oceanlz@yahoo.com.cn>
0 siblings, 0 replies; 18+ messages in thread
From: lz John @ 2002-10-16 03:11 UTC (permalink / raw)
To: pgsql-sql
i'd like to tranfer sql schema from MS server
Example:
*******************1*********************************
if exists (select * from sysobjects
where id = object_id(N'[admin].[test]') and
OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [admin].[test]
go
*******************2*********************************
CREATE TABLE [admin].[test] (
[test_name] [char] (50) NOT NULL ,
[test_value] [int] NOT NULL
)
i can only realize part 2 and must need the fuction that can check data table.
create table test(
test_name char (50) not null,
test_value int not null
)
thanks for any advice!!
---------------------------------
Do You Yahoo!?
雅虎娱乐新鲜到底,电子周报快乐到家!
^ permalink raw reply [nested|flat] 18+ messages in thread
* Re: [pgadmin-support] hi
@ 2002-10-17 18:20 Hepworth, Mike <mike.hepworth@pbs.proquest.com>
0 siblings, 0 replies; 18+ messages in thread
From: Hepworth, Mike @ 2002-10-17 18:20 UTC (permalink / raw)
To: pgsql-sql
lz,
You could use the plpgsql function language and create a function that tests
for the existence of the file and drop it if it does.
Something like this:
select dropTableIfExists('test');
The dropTableIfExists would be the plpgsql function that you would need to
write.
Later,
Mike Hepworth......
-----Original Message-----
From: lz John [mailto:oceanlz@yahoo.com.cn]
Sent: Thursday, October 17, 2002 1:07 AM
To: pgsql-sql-owner@postgresql.org
Cc: pgsql-general@postgresql.org
Subject: [pgadmin-support] hi
i don't send mail to pgsql-sql@postgresql.org
<mailto:pgsql-sql@postgresql.org> ,but i need help
how to migrate sql from MS sql server to postgresql?
i'd like to tranfer sql schema from MS server
Example:
*******************1*********************************
if exists (select * from sysobjects
where id = object_id(N'[admin].[test]') and
OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [admin].[test]
go
*******************2*********************************
CREATE TABLE [admin].[test] (
[test_name] [char] (50) NOT NULL ,
[test_value] [int] NOT NULL
)
i can only realize part 2. i don't know how to realize part 1.in other
words,
i want to know how to check if a table exist in postgresql
*******************2*********************************
create table test(
test_name char (50) not null,
test_value int not null
)
thanks for any advice!!
_____
Do You Yahoo!?
"发短信赢手机,快来参加雅虎巨星秀!"
<http://rd.yahoo.com/mail_cn/tag/?http://cn.ent.yahoo.com/star/midautumn/ind
ex.html>
^ permalink raw reply [nested|flat] 18+ messages in thread
* Hi
@ 2004-11-07 06:45 vasundhar <vasundharb@gmail.com>
2004-11-08 15:57 ` Re: Hi Steven Klassen <sklassen@commandprompt.com>
0 siblings, 1 reply; 18+ messages in thread
From: vasundharb@gmail.com @ 2004-11-07 06:45 UTC (permalink / raw)
To: pgsql-sql
Hi I am using REL on which only 7.3.2 PG only available and
I want to upgrade it to the latest and also integrate it with Perl but
my system is also not supporting the DBI
any suggestions please
^ permalink raw reply [nested|flat] 18+ messages in thread
* Re: Hi
2004-11-07 06:45 Hi vasundhar <vasundharb@gmail.com>
@ 2004-11-08 15:57 ` Steven Klassen <sklassen@commandprompt.com>
0 siblings, 0 replies; 18+ messages in thread
From: Steven Klassen @ 2004-11-08 15:57 UTC (permalink / raw)
To: vasundhar <vasundharb@gmail.com>; +Cc: pgsql-sql
* vasundhar <vasundharb@gmail.com> [2004-11-06 22:45:36 -0800]:
> Hi I am using REL on which only 7.3.2 PG only available and I want
> to upgrade it to the latest and also integrate it with Perl but my
> system is also not supporting the DBI any suggestions please
My suggestion would be to determine why your system won't support DBI
and fix it.
--
Steven Klassen - Lead Programmer
Command Prompt, Inc. - http://www.commandprompt.com/
PostgreSQL Replication & Support Services, (503) 667-4564
^ permalink raw reply [nested|flat] 18+ messages in thread
* hi
@ 2007-04-24 12:09 Penchalaiah P. <penchalaiahp@infics.com>
2007-04-24 12:45 ` Re: hi Wilkinson, Jim <Jim.Wilkinson@cra-arc.gc.ca>
2007-04-24 13:06 ` Re: hi David Flegl <ml_flegl@centrum.cz>
2007-04-24 15:05 ` Re: hi Ragnar <gnari@hive.is>
2007-04-24 16:41 ` Re: hi Stephan Szabo <sszabo@megazone.bigpanda.com>
2007-05-06 23:42 ` Re: hi John Summerfield <postgres@herakles.homelinux.org>
0 siblings, 5 replies; 18+ messages in thread
From: Penchalaiah P. @ 2007-04-24 12:09 UTC (permalink / raw)
To: pgsql-sql
Hi
I have the data like this in temp table
SQL> Select sno, value from temp;
SNO Value
1 650.00
2 850.00
3 640.00
3 985.00
5 987.00
9 9864.00
7 875.00
Now, I want display the result like this...
SQL> Select sno, value, get_sum(value) as sum from temp;
SNO Value SUM
1 650.00 650.00
2 850.00 1500.00 --650+850
3 640.00 2140.00 --1500+640
3 985.00 3125.00 -- 2140+985
5 987.00 4112.00
9 9864.00 13976.00
7 875.00 14851.00
Any one can tell me query for this .. I don't want any procedure or
function...
Thanks & Regards
Penchal Reddy
Information transmitted by this e-mail is proprietary to Infinite Computer Solutions and / or its Customers and is intended for use only by the individual or the entity to which it is addressed, and may contain information that is privileged, confidential or exempt from disclosure under applicable law. If you are not the intended recipient or it appears that this mail has been forwarded to you without proper authority, you are notified that any use or dissemination of this information in any manner is strictly prohibited. In such cases, please notify us immediately at info.in@infics.com and delete this email from your records.
^ permalink raw reply [nested|flat] 18+ messages in thread
* Re: hi
2007-04-24 12:09 hi Penchalaiah P. <penchalaiahp@infics.com>
@ 2007-04-24 12:45 ` Wilkinson, Jim <Jim.Wilkinson@cra-arc.gc.ca>
4 siblings, 0 replies; 18+ messages in thread
From: Wilkinson, Jim @ 2007-04-24 12:45 UTC (permalink / raw)
To: Penchalaiah P. <penchalaiahp@infics.com>; pgsql-sql
Select sno AS "SNO",
SELECT value AS "VALUE",
get_sum(value) as SUM
from temp;
________________________________
From: pgsql-sql-owner@postgresql.org
[mailto:pgsql-sql-owner@postgresql.org] On Behalf Of Penchalaiah P.
Sent: April 24, 2007 8:09 AM
To: pgsql-sql@postgresql.org
Subject: [SQL] hi
Hi
I have the data like this in temp table
SQL> Select sno, value from temp;
SNO Value
1 650.00
2 850.00
3 640.00
3 985.00
5 987.00
9 9864.00
7 875.00
Now, I want display the result like this...
SQL> Select sno, value, get_sum(value) as sum from temp;
SNO Value SUM
1 650.00 650.00
2 850.00 1500.00 --650+850
3 640.00 2140.00 --1500+640
3 985.00 3125.00 -- 2140+985
5 987.00 4112.00
9 9864.00 13976.00
7 875.00 14851.00
Any one can tell me query for this .. I don't want any procedure or
function...
Thanks & Regards
Penchal Reddy
Information transmitted by this e-mail is proprietary to Infinite
Computer Solutions and / or its Customers and is intended for use only
by the individual or the entity to which it is addressed, and may
contain information that is privileged, confidential or exempt from
disclosure under applicable law. If you are not the intended recipient
or it appears that this mail has been forwarded to you without proper
authority, you are notified that any use or dissemination of this
information in any manner is strictly prohibited. In such cases, please
notify us immediately at info.in@infics.com and delete this email from
your records.
^ permalink raw reply [nested|flat] 18+ messages in thread
* Re: hi
2007-04-24 12:09 hi Penchalaiah P. <penchalaiahp@infics.com>
@ 2007-04-24 13:06 ` David Flegl <ml_flegl@centrum.cz>
4 siblings, 0 replies; 18+ messages in thread
From: David Flegl @ 2007-04-24 13:06 UTC (permalink / raw)
To: pgsql-sql
Hi,
try this. It's working...
SELECT t1.sno, sum(t2.value)
FROM temp as t1, temp as t2
WHERE t1.sno >= t2.sno
GROUP BY t1.sno;
but not completely. The problem is the this suppose your sno is uniqu. But as I see 3 is not.
Anyway it may help you.
>I have the data like this in temp table
>
>SQL> Select sno, value from temp;
>
>SNO Value
>
>1 650.00
>
>2 850.00
>
>3 640.00
>
>3 985.00
>
>5 987.00
>
>9 9864.00
>
>7 875.00
>
>Now, I want display the result like this...
>
>SQL> Select sno, value, get_sum(value) as sum from temp;
>
> SNO Value SUM
>
>1 650.00 650.00
>
>2 850.00 1500.00 --650+850
>
>3 640.00 2140.00 --1500+640
>
>3 985.00 3125.00 -- 2140+985
>
>5 987.00 4112.00
>
>9 9864.00 13976.00
>
>7 875.00 14851.00
>
>
>
>Any one can tell me query for this .. I don't want any procedure or
>function...
>
>
>
>
>
>Thanks & Regards
>
>Penchal Reddy
>
>
>
>
>
>Information transmitted by this e-mail is proprietary to Infinite
Computer Solutions and / or its Customers and is intended for use only by
the individual or the entity to which it is addressed, and may contain
information that is privileged, confidential or exempt from disclosure
under applicable law. If you are not the intended recipient or it appears
that this mail has been forwarded to you without proper authority, you are
notified that any use or dissemination of this information in any manner is
strictly prohibited. In such cases, please notify us immediately at
info.in@infics.com and delete this email from your records.
>
^ permalink raw reply [nested|flat] 18+ messages in thread
* Re: hi
2007-04-24 12:09 hi Penchalaiah P. <penchalaiahp@infics.com>
@ 2007-04-24 15:05 ` Ragnar <gnari@hive.is>
4 siblings, 0 replies; 18+ messages in thread
From: Ragnar @ 2007-04-24 15:05 UTC (permalink / raw)
To: Penchalaiah P. <penchalaiahp@infics.com>; +Cc: pgsql-sql
On þri, 2007-04-24 at 17:39 +0530, Penchalaiah P. wrote:
> Hi
>
> I have the data like this in temp table
>
> SQL> Select sno, value from temp;
you seem to be assuming a specific order for this.
gnari
^ permalink raw reply [nested|flat] 18+ messages in thread
* Re: hi
2007-04-24 12:09 hi Penchalaiah P. <penchalaiahp@infics.com>
@ 2007-04-24 16:41 ` Stephan Szabo <sszabo@megazone.bigpanda.com>
4 siblings, 0 replies; 18+ messages in thread
From: Stephan Szabo @ 2007-04-24 16:41 UTC (permalink / raw)
To: Penchalaiah P. <penchalaiahp@infics.com>; +Cc: pgsql-sql
On Tue, 24 Apr 2007, Penchalaiah P. wrote:
> Hi
>
> I have the data like this in temp table
>
> SQL> Select sno, value from temp;
>
> SNO Value
>
> 1 650.00
>
> 2 850.00
>
> 3 640.00
>
> 3 985.00
>
> 5 987.00
>
> 9 9864.00
>
> 7 875.00
Tables are not ordered. You'll need something like an ordering column
that represents the ordering and is unique.
Then you can probably do something like (untested):
select sno, value, (select sum(value) as sum from temp t where t.ordering
<= temp.ordering) from temp order by ordering;
or
select t1.sno, t1.value, sum(t2.value) from temp as t1, temp as t2 where
t1.ordering >= t2.ordering group by t1.ordering, t1.sno, t1.value order
by t1.ordering;
^ permalink raw reply [nested|flat] 18+ messages in thread
* Re: hi
2007-04-24 12:09 hi Penchalaiah P. <penchalaiahp@infics.com>
@ 2007-05-06 23:42 ` John Summerfield <postgres@herakles.homelinux.org>
2007-05-18 12:43 ` Re: hi Lew <lew@nospam.lewscanon.com>
4 siblings, 1 reply; 18+ messages in thread
From: John Summerfield @ 2007-05-06 23:42 UTC (permalink / raw)
To: pgsql-sql
Penchalaiah P. wrote:
> Information transmitted by this e-mail is proprietary to Infinite Computer Solutions
It may be proprietary, but it shore ain't confidential!
^ permalink raw reply [nested|flat] 18+ messages in thread
* Re: hi
2007-04-24 12:09 hi Penchalaiah P. <penchalaiahp@infics.com>
2007-05-06 23:42 ` Re: hi John Summerfield <postgres@herakles.homelinux.org>
@ 2007-05-18 12:43 ` Lew <lew@nospam.lewscanon.com>
0 siblings, 0 replies; 18+ messages in thread
From: Lew @ 2007-05-18 12:43 UTC (permalink / raw)
To: pgsql-sql
John Summerfield wrote:
> Penchalaiah P. wrote:
>
>> Information transmitted by this e-mail is proprietary to Infinite
>> Computer Solutions
>
> It may be proprietary, but it shore ain't confidential!
Placing "confidential" on every document without regard for its content,
especially when some of it's publicly disseminated, can remove the protection
of confidentiality at law from all such marked documents in many
jurisdictions, including the U.S. There must be discrimination applied in the
marking of information as "confidential".
Quite aside from the foolishness you pointed out of marking something
"confidential" then placing it into the public eye in an archived forum where
it will be visible by everybody forever.
Now we can publish everything ever written at or by Infinite Computer
Solutions without fear of liability.
--
Lew
^ permalink raw reply [nested|flat] 18+ messages in thread
* Re: hi
@ 2007-04-25 04:40 saji varghese <sajiv_smrt83@yahoo.co.in>
2007-04-25 05:19 ` Re: hi Phillip Smith <phillip.smith@weatherbeeta.com.au>
0 siblings, 1 reply; 18+ messages in thread
From: saji varghese @ 2007-04-25 04:40 UTC (permalink / raw)
To: pgsql-sql@postgresql.org, Jim.Wilkinson@cra-arc.gc.ca, "Penchalaiah P." <penchalaiahp@infics.com>
Hi,
Can i get GUI tool for PostgreSQLin LINUX.Pls let me know from wher i candownload the same.
Regards
SAJI VERGHESE
+919941140433
----- Original Message ----
From: "Wilkinson, Jim" <Jim.Wilkinson@cra-arc.gc.ca>
To: Penchalaiah P. <penchalaiahp@infics.com>; pgsql-sql@postgresql.org
Sent: Tuesday, 24 April, 2007 6:15:13 PM
Subject: Re: [SQL] hi
Select sno AS “SNO”,
SELECT value AS “VALUE”,
get_sum(value) as SUM
from temp;
From: pgsql-sql-owner@postgresql.org [mailto:pgsql-sql-owner@postgresql.org] On Behalf Of Penchalaiah P.
Sent: April 24, 2007 8:09 AM
To: pgsql-sql@postgresql.org
Subject: [SQL] hi
Hi
I have the data like this in temp table
SQL> Select sno, value from temp;
SNO Value
1 650.00
2 850.00
3 640.00
3 985.00
5 987.00
9 9864.00
7 875.00
Now, I want display the result like this…
SQL> Select sno, value, get_sum(value) as sum from temp;
SNO Value SUM
1 650.00 650.00
2 850.00 1500.00 --650+850
3 640.00 2140.00 --1500+640
3 985.00 3125.00 -- 2140+985
5 987.00 4112.00
9 9864.00 13976.00
7 875.00 14851.00
Any one can tell me query for this .. I don’t want any procedure or function…
Thanks & Regards
Penchal Reddy
Information transmitted by this e-mail is proprietary to Infinite Computer Solutions and / or its Customers and is intended for use only by the individual or the entity to which it is addressed, and may contain information that is privileged, confidential or exempt from disclosure under applicable law. If you are not the intended recipient or it appears that this mail has been forwarded to you without proper authority, you are notified that any use or dissemination of this information in any manner is strictly prohibited. In such cases, please notify us immediately at info.in@infics.com and delete this email from your records.
Add online presence to your web pages, find out how here - http://messenger.yahoo.com/addpresence.php
^ permalink raw reply [nested|flat] 18+ messages in thread
* Re: hi
2007-04-25 04:40 Re: hi saji varghese <sajiv_smrt83@yahoo.co.in>
@ 2007-04-25 05:19 ` Phillip Smith <phillip.smith@weatherbeeta.com.au>
0 siblings, 0 replies; 18+ messages in thread
From: Phillip Smith @ 2007-04-25 05:19 UTC (permalink / raw)
To: saji varghese <sajiv_smrt83@yahoo.co.in>; +Cc: pgsql-sql
Try pgAdmin - Google will find it for you.
~p
On Wed, 2007-04-25 at 10:10 +0530, saji varghese wrote:
>
> Hi,
> Can i get GUI tool for PostgreSQLin LINUX.Pls let me know from wher i
> candownload the same.
>
*******************Confidentiality and Privilege Notice*******************
The material contained in this message is privileged and confidential to
the addressee. If you are not the addressee indicated in this message or
responsible for delivery of the message to such person, you may not copy
or deliver this message to anyone, and you should destroy it and kindly
notify the sender by reply email.
Information in this message that does not relate to the official business
of Weatherbeeta must be treated as neither given nor endorsed by Weatherbeeta.
Weatherbeeta, its employees, contractors or associates shall not be liable
for direct, indirect or consequential loss arising from transmission of this
message or any attachments
^ permalink raw reply [nested|flat] 18+ messages in thread
* hi
@ 2007-07-30 08:11 Penchalaiah P. <penchalaiahp@infics.com>
0 siblings, 0 replies; 18+ messages in thread
From: Penchalaiah P. @ 2007-07-30 08:11 UTC (permalink / raw)
To: Vivekananda Swamy Ramayanam <vramayanam@sapient.com>
I want to fix the pay based on joining date and antedate...antedate is
the last date...
Joining date is 01-07-2007
Antedate is 04-07-2005..
On joining date I will fix the pay but before fixing the pay I will
check whether antedate is there or not, if its there then I will see
difference between 2 dates..if difference is 2 years then I will fix the
pay with increments...if difference is less than 2 years then I will fix
the pay with out increments...
Take an example of above 2 dates..there is no 2 years difference between
two dates...
01-07-2007 I will fix the pay...after 3 days current date =
antedate...so again I have to fix the pay with out my intervention...
Is there any jobs or schedules or triggers to call that function when
current date and antedate is equal...
Thanks & Regards
Penchal Reddy
Information transmitted by this e-mail is proprietary to Infinite Computer Solutions and / or its Customers and is intended for use only by the individual or the entity to which it is addressed, and may contain information that is privileged, confidential or exempt from disclosure under applicable law. If you are not the intended recipient or it appears that this mail has been forwarded to you without proper authority, you are notified that any use or dissemination of this information in any manner is strictly prohibited. In such cases, please notify us immediately at info.in@infics.com and delete this email from your records.
^ permalink raw reply [nested|flat] 18+ messages in thread
* FW: Hi
@ 2011-09-10 21:22 Mandana Mokhtary <mokhtary@kth.se>
2011-09-10 22:04 ` Re: FW: Hi Adrian Klaver <adrian.klaver@gmail.com>
2011-09-12 01:31 ` Re: FW: Hi Craig Ringer <ringerc@ringerc.id.au>
0 siblings, 2 replies; 18+ messages in thread
From: Mandana Mokhtary @ 2011-09-10 21:22 UTC (permalink / raw)
To: pgsql-sql
________________________________
From: Mandana Mokhtary
Sent: 10 September 2011 23:21
To: pgsql-sql-owner@postgresql.org
Subject: Hi
Hi All
I tried to import shapfile into postgres using this comand:
pgsql -c -s 3006 -W LATIN1 c:/...... |psql _U postgres (database name)
I could import some but not all.
I got this error that I do not have any idea about it:
current transaction is aborted, commands ignored until end of transactions block.
at fisrt, the name of the shapfiles have some Swedish alphabet which i changed it to latin
I would appreciate any help.
Regards, Mandana
^ permalink raw reply [nested|flat] 18+ messages in thread
* Re: FW: Hi
2011-09-10 21:22 FW: Hi Mandana Mokhtary <mokhtary@kth.se>
@ 2011-09-10 22:04 ` Adrian Klaver <adrian.klaver@gmail.com>
1 sibling, 0 replies; 18+ messages in thread
From: Adrian Klaver @ 2011-09-10 22:04 UTC (permalink / raw)
To: pgsql-sql; +Cc: Mandana Mokhtary <mokhtary@kth.se>
On Saturday, September 10, 2011 2:22:32 pm Mandana Mokhtary wrote:
> ________________________________
> From: Mandana Mokhtary
> Sent: 10 September 2011 23:21
> To: pgsql-sql-owner@postgresql.org
> Subject: Hi
>
> Hi All
> I tried to import shapfile into postgres using this comand:
>
> pgsql -c -s 3006 -W LATIN1 c:/...... |psql _U postgres (database name)
>
> I could import some but not all.
> I got this error that I do not have any idea about it:
>
> current transaction is aborted, commands ignored until end of transactions
> block.
>
Means just what it says, a transaction was aborted due to error and at that
point all further commands where ignored.
> at fisrt, the name of the shapfiles have some Swedish alphabet which i
> changed it to latin
>
> I would appreciate any help.
The actual command string would be nice:) If the above was it then that
explains the problem. First I think you are looking for psql not pgsql. Second
it should be psql -U postgres ...
>
> Regards, Mandana
--
Adrian Klaver
adrian.klaver@gmail.com
^ permalink raw reply [nested|flat] 18+ messages in thread
* Re: FW: Hi
2011-09-10 21:22 FW: Hi Mandana Mokhtary <mokhtary@kth.se>
@ 2011-09-12 01:31 ` Craig Ringer <ringerc@ringerc.id.au>
1 sibling, 0 replies; 18+ messages in thread
From: Craig Ringer @ 2011-09-12 01:31 UTC (permalink / raw)
To: Mandana Mokhtary <mokhtary@kth.se>; +Cc: pgsql-sql
On 11/09/2011 5:22 AM, Mandana Mokhtary wrote:
>
> ------------------------------------------------------------------------
> *From:* Mandana Mokhtary
> *Sent:* 10 September 2011 23:21
> *To:* pgsql-sql-owner@postgresql.org
> *Subject:* Hi
>
> Hi All
> I tried to import shapfile into postgres using this comand:
>
> pgsql -c -s 3006 -W LATIN1 c:/...... |psql _U postgres (database name)
>
> I could import some but not all.
> I got this error that I do not have any idea about it:
>
> current transaction is aborted, commands ignored until end of
> transactions block.
There was another error before that one, look for it. You want the FIRST
error.
--
Craig Ringer
^ permalink raw reply [nested|flat] 18+ messages in thread
* FW: Hi
@ 2011-09-10 21:22 Mandana Mokhtary <mokhtary@kth.se>
0 siblings, 0 replies; 18+ messages in thread
From: Mandana Mokhtary @ 2011-09-10 21:22 UTC (permalink / raw)
To: pgsql-sql
________________________________
From: Mandana Mokhtary
Sent: 10 September 2011 22:31
To: pgsql-sql-owner@postgresql.org
Subject: Hi
Hi
I am running Get Capabilities application under Apache Tomcat which some how connected to postgre in order to retreie data.
I am facing with this error
LOG: unexpected EOF on client connection
which I don not have any idea about it.
Any help to solve this error would be so appreciated.
Regards, Mandana
^ permalink raw reply [nested|flat] 18+ messages in thread
end of thread, other threads:[~2011-09-12 01:31 UTC | newest]
Thread overview: 18+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2002-10-16 03:11 hi =?gb2312?q?lz=20John?= <oceanlz@yahoo.com.cn>
2002-10-17 18:20 Re: [pgadmin-support] hi Hepworth, Mike <mike.hepworth@pbs.proquest.com>
2004-11-07 06:45 Hi vasundhar <vasundharb@gmail.com>
2004-11-08 15:57 ` Re: Hi Steven Klassen <sklassen@commandprompt.com>
2007-04-24 12:09 hi Penchalaiah P. <penchalaiahp@infics.com>
2007-04-24 12:45 ` Wilkinson, Jim <Jim.Wilkinson@cra-arc.gc.ca>
2007-04-24 13:06 ` David Flegl <ml_flegl@centrum.cz>
2007-04-24 15:05 ` Ragnar <gnari@hive.is>
2007-04-24 16:41 ` Stephan Szabo <sszabo@megazone.bigpanda.com>
2007-05-06 23:42 ` John Summerfield <postgres@herakles.homelinux.org>
2007-05-18 12:43 ` Lew <lew@nospam.lewscanon.com>
2007-04-25 04:40 Re: hi saji varghese <sajiv_smrt83@yahoo.co.in>
2007-04-25 05:19 ` Phillip Smith <phillip.smith@weatherbeeta.com.au>
2007-07-30 08:11 hi Penchalaiah P. <penchalaiahp@infics.com>
2011-09-10 21:22 FW: Hi Mandana Mokhtary <mokhtary@kth.se>
2011-09-10 22:04 ` Re: FW: Hi Adrian Klaver <adrian.klaver@gmail.com>
2011-09-12 01:31 ` Re: FW: Hi Craig Ringer <ringerc@ringerc.id.au>
2011-09-10 21:22 FW: Hi Mandana Mokhtary <mokhtary@kth.se>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox