public inbox for [email protected]  

help / color / mirror / Atom feed

[PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
85+ messages / 2 participants
[nested] [flat]

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* Re: windows CI failing PMSignalState->PMChildFlags[slot] == PM_CHILD_ASSIGNED
@ 2023-02-18 15:00 Alexander Lakhin <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Alexander Lakhin @ 2023-02-18 15:00 UTC (permalink / raw)
  To: Andres Freund <[email protected]>; Thomas Munro <[email protected]>; +Cc: pgsql-hackers

Hello,
18.02.2023 04:06, Andres Freund wrote:
> Hi,
>
> On 2023-02-18 13:27:04 +1300, Thomas Munro wrote:
>> I still have no theory for how this condition was reached despite a
>> lot of time thinking about it and searching for more clues.  As far as
>> I can tell, the recent improvements to postmaster's signal and event
>> handling shouldn't be related: the state management and logic was
>> unchanged.
> Yea, it's all very odd.
>
> If you look at the log:
>
> 2023-02-08 00:53:20.175 GMT client backend[5948] pg_regress/name DETAIL:  No valid identifier after ".".
> 2023-02-08 00:53:20.175 GMT client backend[5948] pg_regress/name STATEMENT:  SELECT parse_ident('xxx.1020');
> ...
> TRAP: failed Assert("PMSignalState->PMChildFlags[slot] == PM_CHILD_ASSIGNED"), File: "../src/backend/storage/ipc/pmsignal.c", Line: 329, PID: 5948
> abort() has been called
> ...
> 2023-02-08 00:53:27.420 GMT postmaster[872] LOG:  server process (PID 5948) was terminated by exception 0xC0000354
> 2023-02-08 00:53:27.420 GMT postmaster[872] HINT:  See C include file "ntstatus.h" for a description of the hexadecimal value.
> 2023-02-08 00:53:27.420 GMT postmaster[872] LOG:  terminating any other active server processes
> 2023-02-08 00:53:27.434 GMT postmaster[872] LOG:  all server processes terminated; reinitializing
>
>
> and that it's indeed the money test that failed:
>       money                        ... FAILED (test process exited with exit code 2)     7337 ms
>
> it's very hard to understand how this stack can come to be:
>
> 00000085`f03ffa40 00007ff6`fd89faa8     ucrtbased!abort(void)+0x5a [minkernel\crts\ucrt\src\appcrt\startup\abort.cpp @ 77]
> 00000085`f03ffa80 00007ff6`fd6474dc     postgres!ExceptionalCondition(
> 			char * conditionName = 0x00007ff6`fdd03ca8 "PMSignalState->PMChildFlags[slot] == PM_CHILD_ASSIGNED",
> 			char * fileName = 0x00007ff6`fdd03c80 "../src/backend/storage/ipc/pmsignal.c",
> 			int lineNumber = 0n329)+0x78 [c:\cirrus\src\backend\utils\error\assert.c @ 67]
> 00000085`f03ffac0 00007ff6`fd676eff     postgres!MarkPostmasterChildActive(void)+0x7c [c:\cirrus\src\backend\storage\ipc\pmsignal.c @ 329]
> 00000085`f03ffb00 00007ff6`fd59aa3a     postgres!InitProcess(void)+0x2ef [c:\cirrus\src\backend\storage\lmgr\proc.c @ 375]
> 00000085`f03ffb60 00007ff6`fd467689     postgres!SubPostmasterMain(
> 			int argc = 0n3,
> 			char ** argv = 0x000001c6`f3814e80)+0x33a [c:\cirrus\src\backend\postmaster\postmaster.c @ 4962]
> 00000085`f03ffd90 00007ff6`fda0e1c9     postgres!main(
> 			int argc = 0n3,
> 			char ** argv = 0x000001c6`f3814e80)+0x2f9 [c:\cirrus\src\backend\main\main.c @ 192]
>
> How can a process that we did notify crashing, that has already executed SQL
> statements, end up in MarkPostmasterChildActive()?
Maybe it's just the backend started for the money test has got
the same PID (5948) that the backend for the name test had?
A simple script that I've found [1] shows that the pids reused rather often
(for me, approximately each 300 process starts in Windows 10 H2), buy maybe
under some circumstances (many concurrent processes?) PIDs can coincide even
so often to trigger that behavior.

[1] https://superuser.com/questions/636497/does-windows-7-reuse-process-ids






^ permalink  raw  reply  [nested|flat] 85+ messages in thread

end of thread, other threads:[~2023-02-18 15:00 UTC | newest]

Thread overview: 85+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2023-02-18 15:00 Re: windows CI failing PMSignalState->PMChildFlags[slot] == PM_CHILD_ASSIGNED Alexander Lakhin <[email protected]>

This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox