[PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline

public inbox for [email protected]  
help / color / mirror / Atom feed

[PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
85+ messages / 2 participants
[nested] [flat]

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* Re: Supporting = operator in gin/gist_trgm_ops
@ 2024-09-17 04:42  David Rowley <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: David Rowley @ 2024-09-17 04:42 UTC (permalink / raw)
  To: Alexander Korotkov <[email protected]>; +Cc: Georgios <[email protected]>; Julien Rouhaud <[email protected]>; PostgreSQL Hackers <[email protected]>

On Sat, 14 Nov 2020 at 18:31, Alexander Korotkov <[email protected]> wrote:
> I also have checked that btree_gist is preferred over pg_trgm gist
> index for equality search.  Despite our gist cost estimate is quite
> dumb, it selects btree_gist index due to its lower size.  So, this
> part also looks good to me.
>
> I'm going to push this if no objections.

(Reviving old thread [1] due to a complaint from a customer about a
performance regression after upgrading PG13 to PG15)

I think the comparisons you made may have been too simplistic. Do you
recall what your test case was?

I tried comparing btree to gist with gist_trgm_ops and found that the
cost estimates for GIST come out cheaper than btree.  Btree only wins
in the most simplistic tests due to Index Only Scans. The test done in
[2] seems to have fallen for that mistake.

create extension if not exists pg_trgm;
create table a (a varchar(250), b varchar(250), c varchar(250));
insert into a select  md5(a::text),md5(a::text),md5(a::text) from
generate_Series(1,1000000)a;
create index a_a_btree on a (a);
create index a_a_gist on a using gist (a gist_trgm_ops);
vacuum freeze analyze a;

-- Gist index wins
explain (analyze, buffers) select * from a where a = '1234';

 Index Scan using a_a_gist on a  (cost=0.41..8.43 rows=1 width=99)
   Index Cond: ((a)::text = '1234'::text)
   Rows Removed by Index Recheck: 1
   Buffers: shared hit=14477
 Planning Time: 0.055 ms
 Execution Time: 23.861 ms
(6 rows)

-- hack to disable gist index.
update pg_index set indisvalid = false where indexrelid='a_a_gist'::regclass;
explain (analyze, buffers) select * from a where a = '1234';

 Index Scan using a_a_btree on a  (cost=0.42..8.44 rows=1 width=99)
   Index Cond: ((a)::text = '1234'::text)
   Buffers: shared read=3
 Planning:
   Buffers: shared hit=8
 Planning Time: 0.090 ms
 Execution Time: 0.048 ms (497.1 times faster)
(7 rows)

-- re-enable gist.
update pg_index set indisvalid = true where indexrelid='a_a_gist'::regclass;

-- try a query that supports btree with index only scan. Btree wins.
explain (analyze, buffers) select a from a where a = '1234';

 Index Only Scan using a_a_btree on a  (cost=0.42..4.44 rows=1 width=33)
   Index Cond: (a = '1234'::text)
   Heap Fetches: 0
   Buffers: shared read=3
 Planning Time: 0.185 ms
 Execution Time: 0.235 ms
(6 rows)

-- Disable IOS and Gist index wins again.
set enable_indexonlyscan=0;
explain (analyze, buffers) select a from a where a = '1234';

 Index Scan using a_a_gist on a  (cost=0.41..8.43 rows=1 width=33)
   Index Cond: ((a)::text = '1234'::text)
   Rows Removed by Index Recheck: 1
   Buffers: shared hit=11564 read=3811
 Planning Time: 0.118 ms
 Execution Time: 71.270 ms (303.2 times faster)
(6 rows)

This does not seem ideal given that the select * with the btree is
~500 times faster than with the gist plan.

For now, I've recommended the GIST indexes are moved to another
tablespace with an increased random_page_cost to try to coax the
planner to use the btree index.

I wonder if we can do something to fix this so the different
tablespace idea isn't the permanent solution. I had a look to see why
the GIST costs come out cheaper. It looks like it's the startup cost
calculation that's slightly different from the btree costing. The
attached patch highlights the difference. When applied both indexes
come out at the same cost and which one is picked is down to which
index has the lower Oid. I've not studied if there's a reason why this
code is different in gist.

David

[1] https://postgr.es/m/CAPpHfducQ0U8noyb2L3VChsyBMsc5V2Ej2whmEuxmAgHa2jVXg@mail.gmail.com
[2] https://postgr.es/m/CAOBaU_YkkhakwTG4oA886T4CQsHG5hfY%2BxGA3dTBdZM%2BDTYJWA%40mail.gmail.com


Attachments:

  [application/octet-stream] gist_cost.diff (598B, ../../CAApHDvp3W7G8Oo4=wjt0ceTbic35SHJ=qfoD_CnPXSnZVzCkhQ@mail.gmail.com/2-gist_cost.diff)
  download | inline diff:
diff --git a/src/backend/utils/adt/selfuncs.c b/src/backend/utils/adt/selfuncs.c
index 03d7fb5f48..e18aa5d02b 100644
--- a/src/backend/utils/adt/selfuncs.c
+++ b/src/backend/utils/adt/selfuncs.c
@@ -7213,7 +7213,7 @@ gistcostestimate(PlannerInfo *root, IndexPath *path, double loop_count,
 	 */
 	if (index->tuples > 1)		/* avoid computing log(0) */
 	{
-		descentCost = ceil(log(index->tuples)) * cpu_operator_cost;
+		descentCost = ceil(log(index->tuples) / log(2.0)) * cpu_operator_cost;
 		costs.indexStartupCost += descentCost;
 		costs.indexTotalCost += costs.num_sa_scans * descentCost;
 	}


^ permalink  raw  reply  [nested|flat] 85+ messages in thread

end of thread, other threads:[~2024-09-17 04:42 UTC | newest]

Thread overview: 85+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2024-09-17 04:42 Re: Supporting = operator in gin/gist_trgm_ops David Rowley <[email protected]>

This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox