[PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline

public inbox for [email protected]  
help / color / mirror / Atom feed

[PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
86+ messages / 3 participants
[nested] [flat]

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34  Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* Re: pg_stat_io_histogram
@ 2026-01-28 11:12  Jakub Wartak <[email protected]>
  0 siblings, 1 reply; 86+ messages in thread

From: Jakub Wartak @ 2026-01-28 11:12 UTC (permalink / raw)
  To: Andres Freund <[email protected]>; +Cc: PostgreSQL Hackers <[email protected]>

On Tue, Jan 27, 2026 at 1:06 PM Jakub Wartak <[email protected]>
wrote:

> [..]
> > > Of course most of the I/O calls today are hitting page cache, so one
> would
> > > expect they'll be < 128us most of the time
> >
> > Have you measured whether overhead is measurable when hitting the page
> cache?
> > I'd hope that it doesn't, due to io combing amortizing the cost
> somewhat. But
> > it seems worth measuring.
>
> Not yet, I first wanted to hear if I'm not sailing into some plain stupid
> direction somewhere with this idea or implementation (e.g.
> that INSTR_TIME_GET_MICROSEC() was a really stupid omission from my side).
>
> I'll try to perform this test overhead measurement hopefully with v3 once
> we settle on how to do that bit shifting/clz().
>

[..]
Here's the answer: on properly isolated perf test run (my
old&legacy&predictiable
4s32c64t NUMA box, s_b=8GB, DB size 16GB, hugepages, no turboboost, proper
warmup,
no THP, cpupower D0, no physical I/O, ~22k pread64() calls/sec combined to
VFS
cache)
    and started on just using single NUMA: numactl --membind=0
--cpunodebind=0
    measured using: pgbench -M prepared -c 4 -j 4 postgres -T 20 -P 1 -S

master+track_io_timings=on, 60s warmup and then 3x runs
    tps = 44615.603668
    tps = 44556.191492
    tps = 44813.793981
    avg = 44662

master+track_io_timings=on+patch, , 60s warmup and then 3x runs
    tps = 44441.879384
    tps = 44403.101737
    tps = 45036.747418
    avg = 44627

so that's like 99.921% (so literally no overhead) and yields picture like:

postgres=# select bucket_latency_us, bucket_count
from pg_stat_io_histogram
where
    bucket_count > 0 and
    backend_type = 'client backend' and
    io_type = 'read' and
    context = 'normal'
order by bucket_latency_us;
 bucket_latency_us | bucket_count
-------------------+--------------
 [0,9)             |       273455
 [8,17)            |      3820379
 [16,33)           |        29359
 [32,65)           |          585
 [64,129)          |          467
 [128,257)         |          419
 [256,513)         |        15828
 [512,1025)        |           89

So one can also see 0.25..0.5ms bucket being larger there (initial reading
of the data from physical device) and that's hardware RAID-1 with 2x
Intel D3-S4510. And if I do pg_buffercache_evict_all()+vm drop_cache+
pg_stat_reset_shared(), I get this picture (note for bulkreads):

postgres=# select bucket_latency_us, bucket_count
from pg_stat_io_histogram
where
    bucket_count > 0 and
    backend_type = 'client backend' and context='bulkread';
 bucket_latency_us | bucket_count
-------------------+--------------
 [0,9)             |       102555
 [8,17)            |           70
 [16,33)           |         3938
 [32,65)           |         6763
 [64,129)          |         5206
 [128,257)         |         9392
 [256,513)         |        10959
 [512,1025)        |        21372
 [1024,2049)       |          502
 [2048,4097)       |           34
 [4096,8193)       |            2
 [8192,16385)      |            2
 [16384,32769)     |            7

So clearly there's a distinction between reading the VFS cache and hitting
physical I/O.

Now we'll just probably settle on the proper get_bucket_index() impl.

-J.


^ permalink  raw  reply  [nested|flat] 86+ messages in thread

* Re: pg_stat_io_histogram
@ 2026-01-29 16:27  Andres Freund <[email protected]>
  parent: Jakub Wartak <[email protected]>
  0 siblings, 0 replies; 86+ messages in thread

From: Andres Freund @ 2026-01-29 16:27 UTC (permalink / raw)
  To: Jakub Wartak <[email protected]>; +Cc: PostgreSQL Hackers <[email protected]>

Hi,

On 2026-01-28 12:12:10 +0100, Jakub Wartak wrote:
> On Tue, Jan 27, 2026 at 1:06 PM Jakub Wartak <[email protected]>
> > Not yet, I first wanted to hear if I'm not sailing into some plain stupid
> > direction somewhere with this idea or implementation (e.g.
> > that INSTR_TIME_GET_MICROSEC() was a really stupid omission from my side).
> >
> > I'll try to perform this test overhead measurement hopefully with v3 once
> > we settle on how to do that bit shifting/clz().
> >
>
> [..]
> Here's the answer: on properly isolated perf test run (my
> old&legacy&predictiable
> 4s32c64t NUMA box, s_b=8GB, DB size 16GB, hugepages, no turboboost, proper
> warmup,
> no THP, cpupower D0, no physical I/O, ~22k pread64() calls/sec combined to
> VFS
> cache)
>     and started on just using single NUMA: numactl --membind=0
> --cpunodebind=0
>     measured using: pgbench -M prepared -c 4 -j 4 postgres -T 20 -P 1 -S
>
> master+track_io_timings=on, 60s warmup and then 3x runs
>     tps = 44615.603668
>     tps = 44556.191492
>     tps = 44813.793981
>     avg = 44662
>
> master+track_io_timings=on+patch, , 60s warmup and then 3x runs
>     tps = 44441.879384
>     tps = 44403.101737
>     tps = 45036.747418
>     avg = 44627
>
> so that's like 99.921% (so literally no overhead) and yields picture like:

I don't think that's a particularly useful assurance, unfortunately:

1) Using pgbench with an in-memory readonly workload is typically limited by
   context switch overhead and per-statement overhead. After a short while you
   have at most one IO per statement (the heap page), which obviously isn't
   going to be affected by a small per-IO overhead.

2) The per-core memory bandwidth on that old machine, if it's the quite old
   EDB machine I think it is, is so low, that you'd be bottlenecked by memory
   bandwidth well before you're going to be bottlenecked by actual CPU stuff
   (which the bucket computation is).

I think you'd have to test something like pg_prewarm(), with
io_combine_limit=1, on a modern *client* CPU (client CPUs typically have much
higher per-core memory bandwidth than the more scalable server CPUs).

Greetings,

Andres Freund

^ permalink  raw  reply  [nested|flat] 86+ messages in thread

end of thread, other threads:[~2026-01-29 16:27 UTC | newest]

Thread overview: 86+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2026-01-28 11:12 Re: pg_stat_io_histogram Jakub Wartak <[email protected]>
2026-01-29 16:27 ` Re: pg_stat_io_histogram Andres Freund <[email protected]>

This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox