[PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline

public inbox for [email protected]  
help / color / mirror / Atom feed

[PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
85+ messages / 2 participants
[nested] [flat]

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)--
Content-Type: Text/Plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
 filename="0001-Fix-timeline-tracking-failure-while-sending-a-PG13.patch.txt"



^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline
@ 2020-12-09 08:22 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2020-12-09 08:22 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd.
---
 src/backend/replication/walsender.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index fe0d368a35..8545c6c423 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2491,7 +2491,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
-- 
2.27.0


----Next_Part(Tue_Jan__5_17_26_02_2021_224)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 33 ++++++++++++++++++
 src/test/perl/TestLib.pm                  | 16 ++++++---
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 5 files changed, 92 insertions(+), 37 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..687aa3ac88 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,39 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm
index a7490d2ce7..a0ce9521e2 100644
--- a/src/test/perl/TestLib.pm
+++ b/src/test/perl/TestLib.pm
@@ -402,30 +402,38 @@ sub slurp_dir
 
 =pod
 
-=item slurp_file(filename)
+=item slurp_file(filename, pos)
 
-Return the full contents of the specified file.
+Return the contents after pos of the specified file.
+Reutrns the full contents if pos is omitted.
 
 =cut
 
 sub slurp_file
 {
-	my ($filename) = @_;
+	my ($filename, $from) = @_;
 	local $/;
 	my $contents;
+
+	$from = 0 unless defined $from;
+
 	if ($Config{osname} ne 'MSWin32')
 	{
 		open(my $in, '<', $filename)
 		  or die "could not read \"$filename\": $!";
+		seek($in, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $!";
 		$contents = <$in>;
 		close $in;
 	}
 	else
 	{
 		my $fHandle = createFile($filename, "r", "rwd")
-		  or die "could not open \"$filename\": $^E";
+		  or die "could not open \"$filename\": $^E\n";
 		OsFHandleOpen(my $fh = IO::Handle->new(), $fHandle, 'r')
 		  or die "could not read \"$filename\": $^E\n";
+		seek($fh, $from, 0)
+		  or die "could not seek \"$filename\" to $from: $^E\n";
 		$contents = <$fh>;
 		CloseHandle($fHandle)
 		  or die "could not close \"$filename\": $^E\n";
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Wed_Jan__6_10_48_04_2021_104)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH] Fix timeline-tracking failure while sending a historic timeline
@ 2021-01-05 04:34 Kyotaro Horiguchi <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Kyotaro Horiguchi @ 2021-01-05 04:34 UTC (permalink / raw)

Walsender should track timeline switches while sending a historic
timeline. Regain that behavior, which was broken in PG13, by a thinko
of 709d003fbd. Backpatch to PG13.
---
 src/backend/replication/walsender.c       |  2 +-
 src/test/perl/PostgresNode.pm             | 36 ++++++++++++++++++++
 src/test/recovery/t/001_stream_rep.pl     | 41 ++++++++++++++++++++++-
 src/test/recovery/t/019_replslot_limit.pl | 37 ++++----------------
 4 files changed, 83 insertions(+), 33 deletions(-)

diff --git a/src/backend/replication/walsender.c b/src/backend/replication/walsender.c
index 7f87eb7f19..04f6c3ebb4 100644
--- a/src/backend/replication/walsender.c
+++ b/src/backend/replication/walsender.c
@@ -2478,7 +2478,7 @@ WalSndSegmentOpen(XLogReaderState *state, XLogSegNo nextSegNo,
 		XLogSegNo	endSegNo;
 
 		XLByteToSeg(sendTimeLineValidUpto, endSegNo, state->segcxt.ws_segsize);
-		if (state->seg.ws_segno == endSegNo)
+		if (nextSegNo == endSegNo)
 			*tli_p = sendTimeLineNextTLI;
 	}
 
diff --git a/src/test/perl/PostgresNode.pm b/src/test/perl/PostgresNode.pm
index 980f1f1533..a08c71b549 100644
--- a/src/test/perl/PostgresNode.pm
+++ b/src/test/perl/PostgresNode.pm
@@ -2138,6 +2138,42 @@ sub pg_recvlogical_upto
 
 =pod
 
+=item $node->current_log_position()
+
+Return the current position of server log.
+
+=cut
+
+sub current_log_position
+{
+	my $self = shift;
+
+	return (stat $self->logfile)[7];
+}
+
+=pod
+
+=item $node->find_in_log($pattern, $startpos)
+
+Returns whether the $pattern occurs after $startpos in the server log.
+
+=cut
+
+sub find_in_log
+{
+	my ($self, $pattern, $startpos) = @_;
+
+	$startpos = 0 unless defined $startpos;
+	my $log = TestLib::slurp_file($self->logfile);
+	return 0 if (length($log) <= $startpos);
+
+	$log = substr($log, $startpos);
+
+	return $log =~ m/$pattern/;
+}
+
+=pod
+
 =back
 
 =cut
diff --git a/src/test/recovery/t/001_stream_rep.pl b/src/test/recovery/t/001_stream_rep.pl
index 778f11b28b..8d2b24fe55 100644
--- a/src/test/recovery/t/001_stream_rep.pl
+++ b/src/test/recovery/t/001_stream_rep.pl
@@ -2,8 +2,9 @@
 use strict;
 use warnings;
 use PostgresNode;
+use Time::HiRes qw(usleep);
 use TestLib;
-use Test::More tests => 36;
+use Test::More tests => 37;
 
 # Initialize master node
 my $node_master = get_new_node('master');
@@ -409,3 +410,41 @@ ok( ($phys_restart_lsn_pre cmp $phys_restart_lsn_post) == 0,
 my $master_data = $node_master->data_dir;
 ok(!-f "$master_data/pg_wal/$segment_removed",
 	"WAL segment $segment_removed recycled after physical slot advancing");
+
+#
+# Check if timeline-increment works while reading a historic timeline.
+my $node_primary_2 = get_new_node('primary_2');
+# archiving is needed to create .paritial segment
+$node_primary_2->init(allows_streaming => 1, has_archiving => 1);
+$node_primary_2->start;
+$node_primary_2->backup($backup_name);
+my $node_standby_3 = get_new_node('standby_3');
+$node_standby_3->init_from_backup($node_primary_2, $backup_name,
+								  has_streaming => 1);
+$node_primary_2->stop;
+$node_primary_2->set_standby_mode; # increment primary timeline
+$node_primary_2->start;
+$node_primary_2->promote;
+my $logstart = $node_standby_3->current_log_position();
+$node_standby_3->start;
+
+my $success = 0;
+for (my $i = 0 ; $i < 1000; $i++)
+{
+	if ($node_standby_3->find_in_log(
+			"requested WAL segment [0-9A-F]+ has already been removed",
+			$logstart))
+	{
+		last;
+	}
+	elsif ($node_standby_3->find_in_log(
+			"End of WAL reached on timeline",
+			   $logstart))
+	{
+		$success = 1;
+		last;
+	}
+	usleep(100_000);
+}
+
+ok($success, 'Timeline increment while reading a historic timeline');
diff --git a/src/test/recovery/t/019_replslot_limit.pl b/src/test/recovery/t/019_replslot_limit.pl
index a7231dcd47..8b3c5de057 100644
--- a/src/test/recovery/t/019_replslot_limit.pl
+++ b/src/test/recovery/t/019_replslot_limit.pl
@@ -165,19 +165,17 @@ $node_master->wait_for_catchup($node_standby, 'replay', $start_lsn);
 
 $node_standby->stop;
 
-ok( !find_in_log(
-		$node_standby,
-		"requested WAL segment [0-9A-F]+ has already been removed"),
+ok( !$node_standby->find_in_log(
+		 "requested WAL segment [0-9A-F]+ has already been removed"),
 	'check that required WAL segments are still available');
 
 # Advance WAL again, the slot loses the oldest segment.
-my $logstart = get_log_size($node_master);
+my $logstart = $node_master->current_log_position();
 advance_wal($node_master, 7);
 $node_master->safe_psql('postgres', "CHECKPOINT;");
 
 # WARNING should be issued
-ok( find_in_log(
-		$node_master,
+ok( $node_master->find_in_log(
 		"invalidating slot \"rep1\" because its restart_lsn [0-9A-F/]+ exceeds max_slot_wal_keep_size",
 		$logstart),
 	'check that the warning is logged');
@@ -190,14 +188,13 @@ is($result, "rep1|f|t|lost|",
 	'check that the slot became inactive and the state "lost" persists');
 
 # The standby no longer can connect to the master
-$logstart = get_log_size($node_standby);
+$logstart = $node_standby->current_log_position();
 $node_standby->start;
 
 my $failed = 0;
 for (my $i = 0; $i < 10000; $i++)
 {
-	if (find_in_log(
-			$node_standby,
+	if ($node_standby->find_in_log(
 			"requested WAL segment [0-9A-F]+ has already been removed",
 			$logstart))
 	{
@@ -264,25 +261,3 @@ sub advance_wal
 	}
 	return;
 }
-
-# return the size of logfile of $node in bytes
-sub get_log_size
-{
-	my ($node) = @_;
-
-	return (stat $node->logfile)[7];
-}
-
-# find $pat in logfile of $node after $off-th byte
-sub find_in_log
-{
-	my ($node, $pat, $off) = @_;
-
-	$off = 0 unless defined $off;
-	my $log = TestLib::slurp_file($node->logfile);
-	return 0 if (length($log) <= $off);
-
-	$log = substr($log, $off);
-
-	return $log =~ m/$pat/;
-}
-- 
2.27.0


----Next_Part(Thu_Jan__7_16_32_36_2021_122)----





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

* [PATCH v3] Don't lose column values on REPACK
@ 2026-05-04 15:19 Álvaro Herrera <[email protected]>
  0 siblings, 0 replies; 85+ messages in thread

From: Álvaro Herrera @ 2026-05-04 15:19 UTC (permalink / raw)

Commit 28d534e2ae0a introduced reform_tuple() with a fast path that
returns the source tuple verbatim when no dropped columns require fixing
up.  I (Álvaro) failed to realize that this broke handling of columns
with a 'missingval' defined: after a VACUUM FULL, CLUSTER, or REPACK
operation, the catalogued missingval is thrown away, so the tuples are
no longer correct.

Fix by forcing the rewrite when the tuple is shorter than the tuple
descriptor.

Author: Satya Narlapuram <[email protected]>
Discussion: https://postgr.es/m/CAHg+QDeoccU5CudrJpmSKZfKZ1gRMNY=5BxSC=JpHgkonzgcOw@mail.gmail.com
---
 contrib/test_decoding/expected/repack.out  | 22 +++++++++++++
 contrib/test_decoding/sql/repack.sql       |  9 +++++
 src/backend/access/heap/heapam_handler.c   | 38 +++++++++++++++++-----
 src/test/regress/expected/fast_default.out | 36 ++++++++++++++++++++
 src/test/regress/sql/fast_default.sql      | 16 +++++++++
 5 files changed, 112 insertions(+), 9 deletions(-)

diff --git a/contrib/test_decoding/expected/repack.out b/contrib/test_decoding/expected/repack.out
index 1f99f26c1f8..cf93c1f0d3d 100644
--- a/contrib/test_decoding/expected/repack.out
+++ b/contrib/test_decoding/expected/repack.out
@@ -29,3 +29,25 @@ SELECT a.relname, a.relfilenode=b.relfilenode FROM pg_class a
 
 DROP TABLE ptnowner;
 DROP ROLE regress_ptnowner;
+-- Verify that REPACK (CONCURRENTLY) doesn't lose "attmissingval" columns
+CREATE TABLE rpk_missing (id int PRIMARY KEY);
+INSERT INTO rpk_missing SELECT generate_series(1, 3);
+ALTER TABLE rpk_missing ADD COLUMN a int DEFAULT 42;
+SELECT * FROM rpk_missing;
+ id | a  
+----+----
+  1 | 42
+  2 | 42
+  3 | 42
+(3 rows)
+
+REPACK (CONCURRENTLY) rpk_missing;
+SELECT * FROM rpk_missing;
+ id | a  
+----+----
+  1 | 42
+  2 | 42
+  3 | 42
+(3 rows)
+
+DROP TABLE rpk_missing;
diff --git a/contrib/test_decoding/sql/repack.sql b/contrib/test_decoding/sql/repack.sql
index c3bfae61f7f..6164dd4235f 100644
--- a/contrib/test_decoding/sql/repack.sql
+++ b/contrib/test_decoding/sql/repack.sql
@@ -23,3 +23,12 @@ SELECT a.relname, a.relfilenode=b.relfilenode FROM pg_class a
   JOIN ptnowner_oldnodes b USING (oid) ORDER BY a.relname COLLATE "C";
 DROP TABLE ptnowner;
 DROP ROLE regress_ptnowner;
+
+-- Verify that REPACK (CONCURRENTLY) doesn't lose "attmissingval" columns
+CREATE TABLE rpk_missing (id int PRIMARY KEY);
+INSERT INTO rpk_missing SELECT generate_series(1, 3);
+ALTER TABLE rpk_missing ADD COLUMN a int DEFAULT 42;
+SELECT * FROM rpk_missing;
+REPACK (CONCURRENTLY) rpk_missing;
+SELECT * FROM rpk_missing;
+DROP TABLE rpk_missing;
diff --git a/src/backend/access/heap/heapam_handler.c b/src/backend/access/heap/heapam_handler.c
index 20d3b46e062..2268cc277bc 100644
--- a/src/backend/access/heap/heapam_handler.c
+++ b/src/backend/access/heap/heapam_handler.c
@@ -2396,10 +2396,10 @@ heap_insert_for_repack(HeapTuple tuple, Relation OldHeap, Relation NewHeap,
 /*
  * Subroutine for reform_and_rewrite_tuple and heap_insert_for_repack.
  *
- * Deform the given tuple, set values of dropped columns to NULL, form a new
- * tuple and return it.  If no attributes need to be changed in this way, a
- * copy of the original tuple is returned.  Caller is responsible for freeing
- * the returned tuple.
+ * Deform the given tuple, set values of dropped columns to NULL, and fill in
+ * any values from attmissingval; then form a new tuple and return it.  If no
+ * attributes need to be changed, a copy of the original tuple is returned.
+ * Caller is responsible for freeing the returned tuple.
  *
  * XXX this coding assumes that both relations have the same tupledesc.
  */
@@ -2411,13 +2411,33 @@ reform_tuple(HeapTuple tuple, Relation OldHeap, Relation NewHeap,
 	TupleDesc	newTupDesc = RelationGetDescr(NewHeap);
 	bool		needs_reform = false;
 
-	/* Skip work if the tuple doesn't need any attributes changed */
-	for (int i = 0; i < newTupDesc->natts; i++)
+	/*
+	 * A short tuple might require values from attmissing val, so activate the
+	 * coding unconditionally in that case.  The value might legitimally be
+	 * NULL otherwise, so this is slightly wasteful, but it probably beats
+	 * having to test each attribute for presence of attmissingval each time.
+	 */
+	if (HeapTupleHeaderGetNatts(tuple->t_data) < newTupDesc->natts)
+		needs_reform = true;
+
+	/*
+	 * If the column has been dropped but a value is still present, we can
+	 * optimize storage now by getting rid of it.
+	 */
+	if (!needs_reform)
 	{
-		if (TupleDescCompactAttr(newTupDesc, i)->attisdropped &&
-			!heap_attisnull(tuple, i + 1, newTupDesc))
-			needs_reform = true;
+		for (int i = 0; i < newTupDesc->natts; i++)
+		{
+			if (TupleDescCompactAttr(newTupDesc, i)->attisdropped &&
+				!heap_attisnull(tuple, i + 1, newTupDesc))
+			{
+				needs_reform = true;
+				break;
+			}
+		}
 	}
+
+	/* Skip work if no changes are needed */
 	if (!needs_reform)
 		return heap_copytuple(tuple);
 
diff --git a/src/test/regress/expected/fast_default.out b/src/test/regress/expected/fast_default.out
index bd142ed481c..5813f1c61a5 100644
--- a/src/test/regress/expected/fast_default.out
+++ b/src/test/regress/expected/fast_default.out
@@ -969,6 +969,42 @@ SELECT count(*)
      0
 (1 row)
 
+-- Verify that table-rewriting maintenance commands preserve attmissingval
+-- columns.
+CREATE TABLE t (id int PRIMARY KEY);
+INSERT INTO t SELECT generate_series(1, 3);
+ALTER TABLE t ADD COLUMN a int DEFAULT 42;
+ALTER TABLE t ADD COLUMN b int NOT NULL DEFAULT 7 CHECK (b > 0);
+VACUUM FULL t;
+SELECT * FROM t ORDER BY id;
+ id | a  | b 
+----+----+---
+  1 | 42 | 7
+  2 | 42 | 7
+  3 | 42 | 7
+(3 rows)
+
+ALTER TABLE t ADD COLUMN c text DEFAULT 'hello';
+CLUSTER t USING t_pkey;
+SELECT * FROM t ORDER BY id;
+ id | a  | b |   c   
+----+----+---+-------
+  1 | 42 | 7 | hello
+  2 | 42 | 7 | hello
+  3 | 42 | 7 | hello
+(3 rows)
+
+ALTER TABLE t ADD COLUMN d int DEFAULT 99;
+REPACK t;
+SELECT * FROM t ORDER BY id;
+ id | a  | b |   c   | d  
+----+----+---+-------+----
+  1 | 42 | 7 | hello | 99
+  2 | 42 | 7 | hello | 99
+  3 | 42 | 7 | hello | 99
+(3 rows)
+
+DROP TABLE t;
 -- cleanup
 DROP FOREIGN TABLE ft1;
 DROP SERVER s0;
diff --git a/src/test/regress/sql/fast_default.sql b/src/test/regress/sql/fast_default.sql
index 8b31d317d73..e5d9a3d2fd1 100644
--- a/src/test/regress/sql/fast_default.sql
+++ b/src/test/regress/sql/fast_default.sql
@@ -653,6 +653,22 @@ SELECT count(*)
   WHERE attrelid = 'ft1'::regclass AND
     (attmissingval IS NOT NULL OR atthasmissing);
 
+-- Verify that table-rewriting maintenance commands preserve attmissingval
+-- columns.
+CREATE TABLE t (id int PRIMARY KEY);
+INSERT INTO t SELECT generate_series(1, 3);
+ALTER TABLE t ADD COLUMN a int DEFAULT 42;
+ALTER TABLE t ADD COLUMN b int NOT NULL DEFAULT 7 CHECK (b > 0);
+VACUUM FULL t;
+SELECT * FROM t ORDER BY id;
+ALTER TABLE t ADD COLUMN c text DEFAULT 'hello';
+CLUSTER t USING t_pkey;
+SELECT * FROM t ORDER BY id;
+ALTER TABLE t ADD COLUMN d int DEFAULT 99;
+REPACK t;
+SELECT * FROM t ORDER BY id;
+DROP TABLE t;
+
 -- cleanup
 DROP FOREIGN TABLE ft1;
 DROP SERVER s0;
-- 
2.47.3


--ouwjmuj5jnxenbix--





^ permalink  raw  reply  [nested|flat] 85+ messages in thread

end of thread, other threads:[~2026-05-04 15:19 UTC | newest]

Thread overview: 85+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v4 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2020-12-09 08:22 [PATCH v3 3/3] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2021-01-05 04:34 [PATCH] Fix timeline-tracking failure while sending a historic timeline Kyotaro Horiguchi <[email protected]>
2026-05-04 15:19 [PATCH v3] Don't lose column values on REPACK Álvaro Herrera <[email protected]>

This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox