pg.ddx.io  pgsql-performance@postgresql.org mailing list archive  
help / color / mirror / Atom feed
From: Marinos Yannikos <mjy@geizhals.at>
To: Alex Turner <armtuk@gmail.com>
Cc: Joshua D. Drake <jd@commandprompt.com>
Cc: Mohan, Ross <RMohan@arbinet.com>
Cc: pgsql-performance@postgresql.org
Subject: Re: Intel SRCS16 SATA raid? (somewhat OT)
Date: Fri, 15 Apr 2005 18:16:51 +0200
Message-ID: <425FE8F3.5010604@geizhals.at> (raw)
In-Reply-To: <33c6269f05041507437f3e8db3@mail.gmail.com>
References: <CC74E7E10A8A054798B6611BD1FEF4D30625DA59@vamail01.thexchange.com>
	<425E9DE2.7030005@commandprompt.com>
	<425FA27A.8010705@geizhals.at>
	<33c6269f05041507437f3e8db3@mail.gmail.com>

Alex Turner wrote:
> No offense to that review, but it was really wasn't that good, and
> drew bad conclusions from the data.  I posted it originaly and
> immediately regretted it.
> 
> See http://www.tweakers.net/reviews/557/18
> 
> Amazingly the controller with 1Gig cache manages a write throughput of
> 750MB/sec on a single drive.
> 
> quote:
> "Floating high above the crowd, the ARC-1120 has a perfect view on the
> struggles of the other adapters. "
> 
> It's because the adapter has 1Gig of RAM, nothing to do with the RAID
> architecture, it's clearly caching the entire dataset.  The drive
> can't physicaly run that fast.  These guys really don't know what they
> are doing.

Perhaps you didn't read the whole page. It says right at the beginning:

"Because of its simplicity and short test duration, the ATTO Disk 
Benchmark is used a lot for comparing the 'peformance' of hard disks. 
The tool measures the sequential transfer rate of a partition using a 
test length of 32MB at most. Because of this small dataset, ATTO is 
unsuitable for measuring media transfer rates of intelligent 
RAID-adapters which are equipped with cache memory. The smart RAID 
adapters will serve the requested data directly from their cache, as a 
result of which the results have no relationship to the media transfer 
rates of these cards. For this reason ATTO is an ideal tool to test the 
cache transfer rates of intelligent RAID-adapters."

Therefore, the results on this page are valid - they're supposed to show 
the cache/transfer speed, the dataset is 32MB(!) and should fit in the 
caches of all cards.

> See also:
> http://www20.tomshardware.com/storage/20041227/areca-raid6-06.html
> 
> I trust toms hardware a little more to set up a good review to be honest.

I don't, for many (historical) reasons.

> The 3ware trounces the Areca in all IO/sec test.

Maybe, but with no mention of stripe size and other configuration 
details, this is somewhat suspicious. I'll be able to offer benchmarks 
for the 8506-8 vs. the 1120 shortly (1-2 weeks), if you're interested 
(pg_bench, for example, to be a bit more on-topic).

Regards,
  Marinos



Message-ID: <425FE8F3.5010604@geizhals.at>
Permalink:  ../425FE8F3.5010604@geizhals.at/
Also on:    postgresql.org/message-id/425FE8F3.5010604@geizhals.at

 · 

reply

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Reply to all the recipients using the --to and --cc options:
  reply via email

  To: pgsql-performance@postgresql.org
  Cc: mjy@geizhals.at, armtuk@gmail.com, jd@commandprompt.com, RMohan@arbinet.com
  Subject: Re: Intel SRCS16 SATA raid? (somewhat OT)
  In-Reply-To: <425FE8F3.5010604@geizhals.at>

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox