pg.ddx.io pgsql-hackers@postgresql.org mailing list archive
help / color / mirror / Atom feed[PATCH v1 1/1] add timing information to pg_upgrade
29+ messages / 6 participants
[nested] [flat]
* [PATCH v1 1/1] add timing information to pg_upgrade
@ 2023-07-27 23:16 Nathan Bossart <nathan@postgresql.org>
0 siblings, 0 replies; 29+ messages in thread
From: Nathan Bossart @ 2023-07-27 23:16 UTC (permalink / raw)
---
src/bin/pg_upgrade/util.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
inline patch 1: src/bin/pg_upgrade/util.c (+18/-1 lines) download inline-1.patch
diff --git a/src/bin/pg_upgrade/util.c b/src/bin/pg_upgrade/util.c
index 21ba4c8f12..d1b506a741 100644
--- a/src/bin/pg_upgrade/util.c
+++ b/src/bin/pg_upgrade/util.c
@@ -16,6 +16,8 @@
LogOpts log_opts;
+static struct timeval step_start;
+
static void pg_log_v(eLogType type, const char *fmt, va_list ap) pg_attribute_printf(2, 0);
@@ -137,6 +139,8 @@ prep_status(const char *fmt,...)
/* trim strings */
pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+
+ gettimeofday(&step_start, NULL);
}
/*
@@ -170,6 +174,8 @@ prep_status_progress(const char *fmt,...)
pg_log(PG_REPORT, "%-*s", MESSAGE_WIDTH, message);
else
pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+
+ gettimeofday(&step_start, NULL);
}
static void
@@ -283,8 +289,19 @@ pg_fatal(const char *fmt,...)
void
check_ok(void)
{
+ struct timeval step_end;
+ int64 elapsed_ms;
+ int64 start_ms;
+ int64 end_ms;
+
+ gettimeofday(&step_end, NULL);
+
+ start_ms = (step_start.tv_sec * 1000L) + (step_start.tv_usec / 1000L);
+ end_ms = (step_end.tv_sec * 1000L) + (step_end.tv_usec / 1000L);
+ elapsed_ms = end_ms - start_ms;
+
/* all seems well */
- report_status(PG_REPORT, "ok");
+ report_status(PG_REPORT, "ok (took %ld ms)", elapsed_ms);
}
--
2.25.1
* [PATCH v2 1/1] add timing information to pg_upgrade
@ 2023-07-27 23:16 Nathan Bossart <nathan@postgresql.org>
0 siblings, 0 replies; 29+ messages in thread
From: Nathan Bossart @ 2023-07-27 23:16 UTC (permalink / raw)
---
src/bin/pg_upgrade/util.c | 55 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 54 insertions(+), 1 deletion(-)
inline patch 1: src/bin/pg_upgrade/util.c (+54/-1 lines) download inline-1.patch
diff --git a/src/bin/pg_upgrade/util.c b/src/bin/pg_upgrade/util.c
index 21ba4c8f12..25e43a593a 100644
--- a/src/bin/pg_upgrade/util.c
+++ b/src/bin/pg_upgrade/util.c
@@ -9,14 +9,19 @@
#include "postgres_fe.h"
+#include <math.h>
#include <signal.h>
#include "common/username.h"
#include "pg_upgrade.h"
+#include "portability/instr_time.h"
LogOpts log_opts;
+static instr_time step_start;
+
static void pg_log_v(eLogType type, const char *fmt, va_list ap) pg_attribute_printf(2, 0);
+static char *get_time_str(double time_ms);
/*
@@ -137,6 +142,8 @@ prep_status(const char *fmt,...)
/* trim strings */
pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+
+ INSTR_TIME_SET_CURRENT(step_start);
}
/*
@@ -170,6 +177,8 @@ prep_status_progress(const char *fmt,...)
pg_log(PG_REPORT, "%-*s", MESSAGE_WIDTH, message);
else
pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+
+ INSTR_TIME_SET_CURRENT(step_start);
}
static void
@@ -280,11 +289,55 @@ pg_fatal(const char *fmt,...)
}
+static char *
+get_time_str(double time_ms)
+{
+ double seconds;
+ double minutes;
+ double hours;
+ double days;
+
+ if (time_ms < 1000.0)
+ return psprintf("%.3f ms", time_ms);
+
+ seconds = time_ms / 1000.0;
+ minutes = floor(seconds / 60.0);
+ seconds -= 60.0 * minutes;
+ if (minutes < 60.0)
+ return psprintf("%.3f ms (%02d:%06.3f)",
+ time_ms, (int) minutes, seconds);
+
+ hours = floor(minutes / 60.0);
+ minutes -= 60.0 * hours;
+ if (hours < 24.0)
+ return psprintf("%.3f ms (%02d:%02d:%06.3f)",
+ time_ms, (int) hours, (int) minutes, seconds);
+
+ days = floor(hours / 24.0);
+ hours -= 24.0 * days;
+ return psprintf("%.3f ms (%.0f d %02d:%02d:%06.3f)",
+ time_ms, days, (int) hours, (int) minutes, seconds);
+}
+
+
void
check_ok(void)
{
+ instr_time step_end;
+ char *step_time;
+
+ Assert(!INSTR_TIME_IS_ZERO(step_start));
+
+ INSTR_TIME_SET_CURRENT(step_end);
+ INSTR_TIME_SUBTRACT(step_end, step_start);
+ step_time = get_time_str(INSTR_TIME_GET_MILLISEC(step_end));
+
+ /* reset start time */
+ INSTR_TIME_SET_ZERO(step_start);
+
/* all seems well */
- report_status(PG_REPORT, "ok");
+ report_status(PG_REPORT, "ok\t%s", step_time);
+ pfree(step_time);
}
--
2.25.1
* [PATCH v3 2/2] add timing information to pg_upgrade
@ 2023-07-27 23:16 Nathan Bossart <nathan@postgresql.org>
0 siblings, 0 replies; 29+ messages in thread
From: Nathan Bossart @ 2023-07-27 23:16 UTC (permalink / raw)
---
src/bin/pg_upgrade/util.c | 55 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 54 insertions(+), 1 deletion(-)
inline patch 1: src/bin/pg_upgrade/util.c (+54/-1 lines) download inline-1.patch
diff --git a/src/bin/pg_upgrade/util.c b/src/bin/pg_upgrade/util.c
index 21ba4c8f12..23fd5f87af 100644
--- a/src/bin/pg_upgrade/util.c
+++ b/src/bin/pg_upgrade/util.c
@@ -9,14 +9,19 @@
#include "postgres_fe.h"
+#include <math.h>
#include <signal.h>
#include "common/username.h"
#include "pg_upgrade.h"
+#include "portability/instr_time.h"
LogOpts log_opts;
+static instr_time step_start;
+
static void pg_log_v(eLogType type, const char *fmt, va_list ap) pg_attribute_printf(2, 0);
+static char *get_time_str(double time_ms);
/*
@@ -137,6 +142,8 @@ prep_status(const char *fmt,...)
/* trim strings */
pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+
+ INSTR_TIME_SET_CURRENT(step_start);
}
/*
@@ -170,6 +177,8 @@ prep_status_progress(const char *fmt,...)
pg_log(PG_REPORT, "%-*s", MESSAGE_WIDTH, message);
else
pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+
+ INSTR_TIME_SET_CURRENT(step_start);
}
static void
@@ -280,11 +289,55 @@ pg_fatal(const char *fmt,...)
}
+static char *
+get_time_str(double time_ms)
+{
+ double seconds;
+ double minutes;
+ double hours;
+ double days;
+
+ if (time_ms < 1000.0)
+ return psprintf(_("%.3f ms"), time_ms);
+
+ seconds = time_ms / 1000.0;
+ minutes = floor(seconds / 60.0);
+ seconds -= 60.0 * minutes;
+ if (minutes < 60.0)
+ return psprintf(_("%.3f ms (%02d:%06.3f)"),
+ time_ms, (int) minutes, seconds);
+
+ hours = floor(minutes / 60.0);
+ minutes -= 60.0 * hours;
+ if (hours < 24.0)
+ return psprintf(_("%.3f ms (%02d:%02d:%06.3f)"),
+ time_ms, (int) hours, (int) minutes, seconds);
+
+ days = floor(hours / 24.0);
+ hours -= 24.0 * days;
+ return psprintf(_("%.3f ms (%.0f d %02d:%02d:%06.3f)"),
+ time_ms, days, (int) hours, (int) minutes, seconds);
+}
+
+
void
check_ok(void)
{
+ instr_time step_end;
+ char *step_time;
+
+ Assert(!INSTR_TIME_IS_ZERO(step_start));
+
+ INSTR_TIME_SET_CURRENT(step_end);
+ INSTR_TIME_SUBTRACT(step_end, step_start);
+ step_time = get_time_str(INSTR_TIME_GET_MILLISEC(step_end));
+
+ /* reset start time */
+ INSTR_TIME_SET_ZERO(step_start);
+
/* all seems well */
- report_status(PG_REPORT, "ok");
+ report_status(PG_REPORT, "ok\t%s", step_time);
+ pfree(step_time);
}
--
2.25.1
* add timing information to pg_upgrade
@ 2023-07-27 23:51 Nathan Bossart <nathandbossart@gmail.com>
0 siblings, 2 replies; 29+ messages in thread
From: Nathan Bossart @ 2023-07-27 23:51 UTC (permalink / raw)
To: pgsql-hackers
I've been looking into some options for reducing the amount of downtime
required for pg_upgrade, and $SUBJECT seemed like something that would be
worthwhile independent of that effort. The attached work-in-progress patch
adds the elapsed time spent in each step, which looks like this:
Performing Consistency Checks
-----------------------------
Checking cluster versions ok (took 0 ms)
Checking database user is the install user ok (took 3 ms)
Checking database connection settings ok (took 4 ms)
Checking for prepared transactions ok (took 2 ms)
Checking for system-defined composite types in user tables ok (took 82 ms)
Checking for reg* data types in user tables ok (took 55 ms)
...
This information can be used to better understand where the time is going
and to validate future improvements. I'm open to suggestions on formatting
the timing information, assuming folks are interested in this idea.
Thoughts?
--
Nathan Bossart
Amazon Web Services: https://aws.amazon.com
Attachments:
v1-0001-add-timing-information-to-pg_upgrade.patch (text/x-diff, 1.6K) download
From bd3fa72e58d7e9de5a4a0248895531b955ae99b4 Mon Sep 17 00:00:00 2001
From: Nathan Bossart <nathan@postgresql.org>
Date: Thu, 27 Jul 2023 16:16:45 -0700
Subject: [PATCH v1 1/1] add timing information to pg_upgrade
---
src/bin/pg_upgrade/util.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/src/bin/pg_upgrade/util.c b/src/bin/pg_upgrade/util.c
index 21ba4c8f12..d1b506a741 100644
--- a/src/bin/pg_upgrade/util.c
+++ b/src/bin/pg_upgrade/util.c
@@ -16,6 +16,8 @@
LogOpts log_opts;
+static struct timeval step_start;
+
static void pg_log_v(eLogType type, const char *fmt, va_list ap) pg_attribute_printf(2, 0);
@@ -137,6 +139,8 @@ prep_status(const char *fmt,...)
/* trim strings */
pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+
+ gettimeofday(&step_start, NULL);
}
/*
@@ -170,6 +174,8 @@ prep_status_progress(const char *fmt,...)
pg_log(PG_REPORT, "%-*s", MESSAGE_WIDTH, message);
else
pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+
+ gettimeofday(&step_start, NULL);
}
static void
@@ -283,8 +289,19 @@ pg_fatal(const char *fmt,...)
void
check_ok(void)
{
+ struct timeval step_end;
+ int64 elapsed_ms;
+ int64 start_ms;
+ int64 end_ms;
+
+ gettimeofday(&step_end, NULL);
+
+ start_ms = (step_start.tv_sec * 1000L) + (step_start.tv_usec / 1000L);
+ end_ms = (step_end.tv_sec * 1000L) + (step_end.tv_usec / 1000L);
+ elapsed_ms = end_ms - start_ms;
+
/* all seems well */
- report_status(PG_REPORT, "ok");
+ report_status(PG_REPORT, "ok (took %ld ms)", elapsed_ms);
}
--
2.25.1
* Re: add timing information to pg_upgrade
@ 2023-07-28 07:40 Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
parent: Nathan Bossart <nathandbossart@gmail.com>
1 sibling, 1 reply; 29+ messages in thread
From: Bharath Rupireddy @ 2023-07-28 07:40 UTC (permalink / raw)
To: Nathan Bossart <nathandbossart@gmail.com>; +Cc: pgsql-hackers
On Fri, Jul 28, 2023 at 5:21 AM Nathan Bossart <nathandbossart@gmail.com> wrote:
>
> This information can be used to better understand where the time is going
> and to validate future improvements. I'm open to suggestions on formatting
> the timing information, assuming folks are interested in this idea.
>
> Thoughts?
+1 for adding time taken.
Some comments on the patch:
1.
+ gettimeofday(&step_start, NULL);
+ gettimeofday(&step_end, NULL);
+ start_ms = (step_start.tv_sec * 1000L) + (step_start.tv_usec / 1000L);
+ end_ms = (step_end.tv_sec * 1000L) + (step_end.tv_usec / 1000L);
+ elapsed_ms = end_ms - start_ms;
How about using INSTR_TIME_SET_CURRENT, INSTR_TIME_SUBTRACT and
INSTR_TIME_GET_MILLISEC macros instead of gettimeofday and explicit
calculations?
2.
> Checking database user is the install user ok (took 3 ms)
> Checking database connection settings ok (took 4 ms)
+ report_status(PG_REPORT, "ok (took %ld ms)", elapsed_ms);
I think it's okay to just leave it with "ok \t %ld ms", elapsed_ms);
without "took". FWIW, pg_regress does that way, see below:
ok 2 + boolean 50 ms
ok 3 + char 32 ms
ok 4 + name 33 ms
> Performing Consistency Checks
> -----------------------------
> Checking cluster versions ok (took 0 ms)
> Checking database user is the install user ok (took 3 ms)
> Checking database connection settings ok (took 4 ms)
> Checking for prepared transactions ok (took 2 ms)
> Checking for system-defined composite types in user tables ok (took 82 ms)
> Checking for reg* data types in user tables ok (took 55 ms)
Just curious, out of all the reported pg_upgrade prep_status()-es,
which ones are taking more time?
--
Bharath Rupireddy
PostgreSQL Contributors Team
RDS Open Source Databases
Amazon Web Services: https://aws.amazon.com
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-07-28 17:38 Nathan Bossart <nathandbossart@gmail.com>
parent: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
0 siblings, 1 reply; 29+ messages in thread
From: Nathan Bossart @ 2023-07-28 17:38 UTC (permalink / raw)
To: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; +Cc: pgsql-hackers
On Fri, Jul 28, 2023 at 01:10:14PM +0530, Bharath Rupireddy wrote:
> How about using INSTR_TIME_SET_CURRENT, INSTR_TIME_SUBTRACT and
> INSTR_TIME_GET_MILLISEC macros instead of gettimeofday and explicit
> calculations?
That seems like a good idea.
> + report_status(PG_REPORT, "ok (took %ld ms)", elapsed_ms);
>
> I think it's okay to just leave it with "ok \t %ld ms", elapsed_ms);
> without "took". FWIW, pg_regress does that way, see below:
I'm okay with simply adding the time. However, I wonder if we want to
switch to seconds, minutes, hours, etc. if the step takes longer. This
would add a bit of complexity, but it would improve human readability.
Alternatively, we could keep the code simple and machine readable by always
using milliseconds.
> Just curious, out of all the reported pg_upgrade prep_status()-es,
> which ones are taking more time?
I haven't done any testing on meaningful workloads yet, but the following
show up on an empty cluster: "creating dump of database schemas",
"analyzing all rows in the new cluster", "setting next transaction ID and
epoch for new cluster", "restoring datbase schemas in the new cluster", and
"sync data directory to disk". I imagine the dump, restore, and
file-copying steps will stand out once you start adding data.
--
Nathan Bossart
Amazon Web Services: https://aws.amazon.com
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-07-28 18:47 Nathan Bossart <nathandbossart@gmail.com>
parent: Nathan Bossart <nathandbossart@gmail.com>
0 siblings, 1 reply; 29+ messages in thread
From: Nathan Bossart @ 2023-07-28 18:47 UTC (permalink / raw)
To: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; +Cc: pgsql-hackers
On Fri, Jul 28, 2023 at 10:38:14AM -0700, Nathan Bossart wrote:
> I'm okay with simply adding the time. However, I wonder if we want to
> switch to seconds, minutes, hours, etc. if the step takes longer. This
> would add a bit of complexity, but it would improve human readability.
> Alternatively, we could keep the code simple and machine readable by always
> using milliseconds.
... or maybe we show both like psql does. Attached іs a new version of the
patch in which I've made use of the INSTR_TIME_* macros and enhanced the
output formatting (largely borrowed from PrintTiming() in
src/bin/psql/common.c).
--
Nathan Bossart
Amazon Web Services: https://aws.amazon.com
Attachments:
v2-0001-add-timing-information-to-pg_upgrade.patch (text/x-diff, 2.5K) download
From 6a4b836b33c3e18a57438044a10da95ec89dcb65 Mon Sep 17 00:00:00 2001
From: Nathan Bossart <nathan@postgresql.org>
Date: Thu, 27 Jul 2023 16:16:45 -0700
Subject: [PATCH v2 1/1] add timing information to pg_upgrade
---
src/bin/pg_upgrade/util.c | 55 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 54 insertions(+), 1 deletion(-)
diff --git a/src/bin/pg_upgrade/util.c b/src/bin/pg_upgrade/util.c
index 21ba4c8f12..25e43a593a 100644
--- a/src/bin/pg_upgrade/util.c
+++ b/src/bin/pg_upgrade/util.c
@@ -9,14 +9,19 @@
#include "postgres_fe.h"
+#include <math.h>
#include <signal.h>
#include "common/username.h"
#include "pg_upgrade.h"
+#include "portability/instr_time.h"
LogOpts log_opts;
+static instr_time step_start;
+
static void pg_log_v(eLogType type, const char *fmt, va_list ap) pg_attribute_printf(2, 0);
+static char *get_time_str(double time_ms);
/*
@@ -137,6 +142,8 @@ prep_status(const char *fmt,...)
/* trim strings */
pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+
+ INSTR_TIME_SET_CURRENT(step_start);
}
/*
@@ -170,6 +177,8 @@ prep_status_progress(const char *fmt,...)
pg_log(PG_REPORT, "%-*s", MESSAGE_WIDTH, message);
else
pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+
+ INSTR_TIME_SET_CURRENT(step_start);
}
static void
@@ -280,11 +289,55 @@ pg_fatal(const char *fmt,...)
}
+static char *
+get_time_str(double time_ms)
+{
+ double seconds;
+ double minutes;
+ double hours;
+ double days;
+
+ if (time_ms < 1000.0)
+ return psprintf("%.3f ms", time_ms);
+
+ seconds = time_ms / 1000.0;
+ minutes = floor(seconds / 60.0);
+ seconds -= 60.0 * minutes;
+ if (minutes < 60.0)
+ return psprintf("%.3f ms (%02d:%06.3f)",
+ time_ms, (int) minutes, seconds);
+
+ hours = floor(minutes / 60.0);
+ minutes -= 60.0 * hours;
+ if (hours < 24.0)
+ return psprintf("%.3f ms (%02d:%02d:%06.3f)",
+ time_ms, (int) hours, (int) minutes, seconds);
+
+ days = floor(hours / 24.0);
+ hours -= 24.0 * days;
+ return psprintf("%.3f ms (%.0f d %02d:%02d:%06.3f)",
+ time_ms, days, (int) hours, (int) minutes, seconds);
+}
+
+
void
check_ok(void)
{
+ instr_time step_end;
+ char *step_time;
+
+ Assert(!INSTR_TIME_IS_ZERO(step_start));
+
+ INSTR_TIME_SET_CURRENT(step_end);
+ INSTR_TIME_SUBTRACT(step_end, step_start);
+ step_time = get_time_str(INSTR_TIME_GET_MILLISEC(step_end));
+
+ /* reset start time */
+ INSTR_TIME_SET_ZERO(step_start);
+
/* all seems well */
- report_status(PG_REPORT, "ok");
+ report_status(PG_REPORT, "ok\t%s", step_time);
+ pfree(step_time);
}
--
2.25.1
* Re: add timing information to pg_upgrade
@ 2023-07-29 06:47 Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
parent: Nathan Bossart <nathandbossart@gmail.com>
0 siblings, 1 reply; 29+ messages in thread
From: Bharath Rupireddy @ 2023-07-29 06:47 UTC (permalink / raw)
To: Nathan Bossart <nathandbossart@gmail.com>; +Cc: pgsql-hackers
On Sat, Jul 29, 2023 at 12:17 AM Nathan Bossart
<nathandbossart@gmail.com> wrote:
>
> On Fri, Jul 28, 2023 at 10:38:14AM -0700, Nathan Bossart wrote:
> > I'm okay with simply adding the time. However, I wonder if we want to
> > switch to seconds, minutes, hours, etc. if the step takes longer. This
> > would add a bit of complexity, but it would improve human readability.
> > Alternatively, we could keep the code simple and machine readable by always
> > using milliseconds.
>
> ... or maybe we show both like psql does. Attached іs a new version of the
> patch in which I've made use of the INSTR_TIME_* macros and enhanced the
> output formatting (largely borrowed from PrintTiming() in
> src/bin/psql/common.c).
The v2 patch LGTM. I tested it with an upgrade of the 22GB database,
the output is here [1].
While on this, I noticed a thing unrelated to your patch that there's
no space between the longest status message of size 60 bytes and ok -
'Checking for incompatible "aclitem" data type in user tablesok
23.932 ms'. I think MESSAGE_WIDTH needs to be bumped up - 64 or more.
[1]
Performing Consistency Checks
-----------------------------
Checking cluster versions ok 0.000 ms
Checking database user is the install user ok 1.767 ms
Checking database connection settings ok 2.210 ms
Checking for prepared transactions ok 1.411 ms
Checking for system-defined composite types in user tables ok 29.471 ms
Checking for reg* data types in user tables ok 26.251 ms
Checking for contrib/isn with bigint-passing mismatch ok 0.000 ms
Checking for incompatible "aclitem" data type in user tablesok 23.932 ms
Checking for user-defined encoding conversions ok 8.350 ms
Checking for user-defined postfix operators ok 8.229 ms
Checking for incompatible polymorphic functions ok 15.271 ms
Checking for tables WITH OIDS ok 6.120 ms
Checking for invalid "sql_identifier" user columns ok 24.509 ms
Creating dump of global objects ok 14.007 ms
Creating dump of database schemas
ok 176.690 ms
Checking for presence of required libraries ok 0.011 ms
Checking database user is the install user ok 2.566 ms
Checking for prepared transactions ok 2.065 ms
Checking for new cluster tablespace directories ok 0.000 ms
If pg_upgrade fails after this point, you must re-initdb the
new cluster before continuing.
Performing Upgrade
------------------
Setting locale and encoding for new cluster ok 3.014 ms
Analyzing all rows in the new cluster ok 373.270 ms
Freezing all rows in the new cluster ok 81.064 ms
Deleting files from new pg_xact ok 0.089 ms
Copying old pg_xact to new server ok 2.204 ms
Setting oldest XID for new cluster ok 38.314 ms
Setting next transaction ID and epoch for new cluster ok 111.503 ms
Deleting files from new pg_multixact/offsets ok 0.078 ms
Copying old pg_multixact/offsets to new server ok 1.790 ms
Deleting files from new pg_multixact/members ok 0.050 ms
Copying old pg_multixact/members to new server ok 1.532 ms
Setting next multixact ID and offset for new cluster ok 36.770 ms
Resetting WAL archives ok 37.182 ms
Setting frozenxid and minmxid counters in new cluster ok 47.879 ms
Restoring global objects in the new cluster ok 11.615 ms
Restoring database schemas in the new cluster
ok 141.839 ms
Copying user relation files
ok
151308.601 ms (02:31.309)
Setting next OID for new cluster ok 44.800 ms
Sync data directory to disk ok
4461.213 ms (00:04.461)
Creating script to delete old cluster ok 0.059 ms
Checking for extension updates ok 66.899 ms
Upgrade Complete
----------------
Optimizer statistics are not transferred by pg_upgrade.
Once you start the new server, consider running:
/home/ubuntu/postgres/HEAD/bin/vacuumdb --all --analyze-in-stages
Running this script will delete the old cluster's data files:
./delete_old_cluster.sh
real 2m38.133s
user 0m0.151s
sys 0m21.556s
--
Bharath Rupireddy
PostgreSQL Contributors Team
RDS Open Source Databases
Amazon Web Services: https://aws.amazon.com
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-07-29 21:14 Nathan Bossart <nathandbossart@gmail.com>
parent: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
0 siblings, 1 reply; 29+ messages in thread
From: Nathan Bossart @ 2023-07-29 21:14 UTC (permalink / raw)
To: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; +Cc: pgsql-hackers
On Sat, Jul 29, 2023 at 12:17:40PM +0530, Bharath Rupireddy wrote:
> While on this, I noticed a thing unrelated to your patch that there's
> no space between the longest status message of size 60 bytes and ok -
> 'Checking for incompatible "aclitem" data type in user tablesok
> 23.932 ms'. I think MESSAGE_WIDTH needs to be bumped up - 64 or more.
Good catch. I think I'd actually propose just removing "in user tables" or
the word "incompatible" from these messages to keep them succinct.
--
Nathan Bossart
Amazon Web Services: https://aws.amazon.com
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-07-31 06:04 Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
parent: Nathan Bossart <nathandbossart@gmail.com>
0 siblings, 1 reply; 29+ messages in thread
From: Bharath Rupireddy @ 2023-07-31 06:04 UTC (permalink / raw)
To: Nathan Bossart <nathandbossart@gmail.com>; +Cc: pgsql-hackers
On Sun, Jul 30, 2023 at 2:44 AM Nathan Bossart <nathandbossart@gmail.com> wrote:
>
> On Sat, Jul 29, 2023 at 12:17:40PM +0530, Bharath Rupireddy wrote:
> > While on this, I noticed a thing unrelated to your patch that there's
> > no space between the longest status message of size 60 bytes and ok -
> > 'Checking for incompatible "aclitem" data type in user tablesok
> > 23.932 ms'. I think MESSAGE_WIDTH needs to be bumped up - 64 or more.
>
> Good catch. I think I'd actually propose just removing "in user tables" or
> the word "incompatible" from these messages to keep them succinct.
Either of "Checking for \"aclitem\" data type usage" or "Checking for
\"aclitem\" data type in user tables" seems okay to me, however, I
prefer the second wording.
--
Bharath Rupireddy
PostgreSQL Contributors Team
RDS Open Source Databases
Amazon Web Services: https://aws.amazon.com
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-07-31 18:37 Nathan Bossart <nathandbossart@gmail.com>
parent: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
0 siblings, 1 reply; 29+ messages in thread
From: Nathan Bossart @ 2023-07-31 18:37 UTC (permalink / raw)
To: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; +Cc: pgsql-hackers
On Mon, Jul 31, 2023 at 11:34:57AM +0530, Bharath Rupireddy wrote:
> Either of "Checking for \"aclitem\" data type usage" or "Checking for
> \"aclitem\" data type in user tables" seems okay to me, however, I
> prefer the second wording.
Okay. I used the second wording for all the data type checks in v3. I
also marked the timing strings for translation. I considered trying to
extract psql's PrintTiming() so that it could be reused in other utilities,
but the small differences would likely make translation difficult, and the
logic isn't terribly long or sophisticated.
My only remaining concern is that this timing information could cause
pg_upgrade's output to exceed 80 characters per line. I don't know if this
is something that folks are very worried about in 2023, but it still seemed
worth bringing up.
--
Nathan Bossart
Amazon Web Services: https://aws.amazon.com
Attachments: download all (2 files, .tar.gz)
v3-0001-harmonize-data-type-status-messages-in-pg_upgrade.patch (text/x-diff, 2.3K) download
From c52513341fb2a315203e9ba5dd95761220744a74 Mon Sep 17 00:00:00 2001
From: Nathan Bossart <nathan@postgresql.org>
Date: Mon, 31 Jul 2023 11:02:27 -0700
Subject: [PATCH v3 1/2] harmonize data type status messages in pg_upgrade
---
src/bin/pg_upgrade/check.c | 4 ++--
src/bin/pg_upgrade/version.c | 6 +++---
2 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/src/bin/pg_upgrade/check.c b/src/bin/pg_upgrade/check.c
index 64024e3b9e..38a4227be0 100644
--- a/src/bin/pg_upgrade/check.c
+++ b/src/bin/pg_upgrade/check.c
@@ -1215,7 +1215,7 @@ check_for_aclitem_data_type_usage(ClusterInfo *cluster)
{
char output_path[MAXPGPATH];
- prep_status("Checking for incompatible \"aclitem\" data type in user tables");
+ prep_status("Checking for \"aclitem\" data type in user tables");
snprintf(output_path, sizeof(output_path), "tables_using_aclitem.txt");
@@ -1243,7 +1243,7 @@ check_for_jsonb_9_4_usage(ClusterInfo *cluster)
{
char output_path[MAXPGPATH];
- prep_status("Checking for incompatible \"jsonb\" data type");
+ prep_status("Checking for \"jsonb\" data type in user tables");
snprintf(output_path, sizeof(output_path), "%s/%s",
log_opts.basedir,
diff --git a/src/bin/pg_upgrade/version.c b/src/bin/pg_upgrade/version.c
index 403a6d7cfa..9755af920f 100644
--- a/src/bin/pg_upgrade/version.c
+++ b/src/bin/pg_upgrade/version.c
@@ -181,7 +181,7 @@ old_9_3_check_for_line_data_type_usage(ClusterInfo *cluster)
{
char output_path[MAXPGPATH];
- prep_status("Checking for incompatible \"line\" data type");
+ prep_status("Checking for \"line\" data type in user tables");
snprintf(output_path, sizeof(output_path), "%s/%s",
log_opts.basedir,
@@ -221,7 +221,7 @@ old_9_6_check_for_unknown_data_type_usage(ClusterInfo *cluster)
{
char output_path[MAXPGPATH];
- prep_status("Checking for invalid \"unknown\" user columns");
+ prep_status("Checking for \"unknown\" data type in user tables");
snprintf(output_path, sizeof(output_path), "%s/%s",
log_opts.basedir,
@@ -366,7 +366,7 @@ old_11_check_for_sql_identifier_data_type_usage(ClusterInfo *cluster)
{
char output_path[MAXPGPATH];
- prep_status("Checking for invalid \"sql_identifier\" user columns");
+ prep_status("Checking for \"sql_identifier\" data type in user tables");
snprintf(output_path, sizeof(output_path), "%s/%s",
log_opts.basedir,
--
2.25.1
v3-0002-add-timing-information-to-pg_upgrade.patch (text/x-diff, 2.5K) download
From 99ba1903472b72480d4ace13568300f35320cbaf Mon Sep 17 00:00:00 2001
From: Nathan Bossart <nathan@postgresql.org>
Date: Thu, 27 Jul 2023 16:16:45 -0700
Subject: [PATCH v3 2/2] add timing information to pg_upgrade
---
src/bin/pg_upgrade/util.c | 55 ++++++++++++++++++++++++++++++++++++++-
1 file changed, 54 insertions(+), 1 deletion(-)
diff --git a/src/bin/pg_upgrade/util.c b/src/bin/pg_upgrade/util.c
index 21ba4c8f12..23fd5f87af 100644
--- a/src/bin/pg_upgrade/util.c
+++ b/src/bin/pg_upgrade/util.c
@@ -9,14 +9,19 @@
#include "postgres_fe.h"
+#include <math.h>
#include <signal.h>
#include "common/username.h"
#include "pg_upgrade.h"
+#include "portability/instr_time.h"
LogOpts log_opts;
+static instr_time step_start;
+
static void pg_log_v(eLogType type, const char *fmt, va_list ap) pg_attribute_printf(2, 0);
+static char *get_time_str(double time_ms);
/*
@@ -137,6 +142,8 @@ prep_status(const char *fmt,...)
/* trim strings */
pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+
+ INSTR_TIME_SET_CURRENT(step_start);
}
/*
@@ -170,6 +177,8 @@ prep_status_progress(const char *fmt,...)
pg_log(PG_REPORT, "%-*s", MESSAGE_WIDTH, message);
else
pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+
+ INSTR_TIME_SET_CURRENT(step_start);
}
static void
@@ -280,11 +289,55 @@ pg_fatal(const char *fmt,...)
}
+static char *
+get_time_str(double time_ms)
+{
+ double seconds;
+ double minutes;
+ double hours;
+ double days;
+
+ if (time_ms < 1000.0)
+ return psprintf(_("%.3f ms"), time_ms);
+
+ seconds = time_ms / 1000.0;
+ minutes = floor(seconds / 60.0);
+ seconds -= 60.0 * minutes;
+ if (minutes < 60.0)
+ return psprintf(_("%.3f ms (%02d:%06.3f)"),
+ time_ms, (int) minutes, seconds);
+
+ hours = floor(minutes / 60.0);
+ minutes -= 60.0 * hours;
+ if (hours < 24.0)
+ return psprintf(_("%.3f ms (%02d:%02d:%06.3f)"),
+ time_ms, (int) hours, (int) minutes, seconds);
+
+ days = floor(hours / 24.0);
+ hours -= 24.0 * days;
+ return psprintf(_("%.3f ms (%.0f d %02d:%02d:%06.3f)"),
+ time_ms, days, (int) hours, (int) minutes, seconds);
+}
+
+
void
check_ok(void)
{
+ instr_time step_end;
+ char *step_time;
+
+ Assert(!INSTR_TIME_IS_ZERO(step_start));
+
+ INSTR_TIME_SET_CURRENT(step_end);
+ INSTR_TIME_SUBTRACT(step_end, step_start);
+ step_time = get_time_str(INSTR_TIME_GET_MILLISEC(step_end));
+
+ /* reset start time */
+ INSTR_TIME_SET_ZERO(step_start);
+
/* all seems well */
- report_status(PG_REPORT, "ok");
+ report_status(PG_REPORT, "ok\t%s", step_time);
+ pfree(step_time);
}
--
2.25.1
* Re: add timing information to pg_upgrade
@ 2023-08-01 07:45 Peter Eisentraut <peter@eisentraut.org>
parent: Nathan Bossart <nathandbossart@gmail.com>
1 sibling, 1 reply; 29+ messages in thread
From: Peter Eisentraut @ 2023-08-01 07:45 UTC (permalink / raw)
To: Nathan Bossart <nathandbossart@gmail.com>; pgsql-hackers
On 28.07.23 01:51, Nathan Bossart wrote:
> I've been looking into some options for reducing the amount of downtime
> required for pg_upgrade, and $SUBJECT seemed like something that would be
> worthwhile independent of that effort. The attached work-in-progress patch
> adds the elapsed time spent in each step, which looks like this:
>
> Performing Consistency Checks
> -----------------------------
> Checking cluster versions ok (took 0 ms)
> Checking database user is the install user ok (took 3 ms)
> Checking database connection settings ok (took 4 ms)
> Checking for prepared transactions ok (took 2 ms)
> Checking for system-defined composite types in user tables ok (took 82 ms)
> Checking for reg* data types in user tables ok (took 55 ms)
> ...
>
> This information can be used to better understand where the time is going
> and to validate future improvements.
But who would use that, other than, you know, you, right now?
I think the pg_upgrade output is already too full with
not-really-actionable information (like most of the above "Checking ..."
are not really interesting for a regular user).
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-01 07:46 Peter Eisentraut <peter@eisentraut.org>
parent: Nathan Bossart <nathandbossart@gmail.com>
0 siblings, 1 reply; 29+ messages in thread
From: Peter Eisentraut @ 2023-08-01 07:46 UTC (permalink / raw)
To: Nathan Bossart <nathandbossart@gmail.com>; Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; +Cc: pgsql-hackers
On 31.07.23 20:37, Nathan Bossart wrote:
> - prep_status("Checking for incompatible \"aclitem\" data type in user tables");
> + prep_status("Checking for \"aclitem\" data type in user tables");
Why these changes? I think this is losing precision about what it's doing.
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-01 07:58 Daniel Gustafsson <daniel@yesql.se>
parent: Peter Eisentraut <peter@eisentraut.org>
0 siblings, 1 reply; 29+ messages in thread
From: Daniel Gustafsson @ 2023-08-01 07:58 UTC (permalink / raw)
To: Peter Eisentraut <peter@eisentraut.org>; +Cc: Nathan Bossart <nathandbossart@gmail.com>; pgsql-hackers
> On 1 Aug 2023, at 09:45, Peter Eisentraut <peter@eisentraut.org> wrote:
> On 28.07.23 01:51, Nathan Bossart wrote:
>> This information can be used to better understand where the time is going
>> and to validate future improvements.
>
> But who would use that, other than, you know, you, right now?
>
> I think the pg_upgrade output is already too full with not-really-actionable information (like most of the above "Checking ..." are not really interesting for a regular user).
Maybe if made opt-in with a --debug option, or even a compiler option for
enabling only in specialized debugging builds?
--
Daniel Gustafsson
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-01 15:45 Nathan Bossart <nathandbossart@gmail.com>
parent: Peter Eisentraut <peter@eisentraut.org>
0 siblings, 2 replies; 29+ messages in thread
From: Nathan Bossart @ 2023-08-01 15:45 UTC (permalink / raw)
To: Peter Eisentraut <peter@eisentraut.org>; +Cc: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; pgsql-hackers
On Tue, Aug 01, 2023 at 09:46:02AM +0200, Peter Eisentraut wrote:
> On 31.07.23 20:37, Nathan Bossart wrote:
>> - prep_status("Checking for incompatible \"aclitem\" data type in user tables");
>> + prep_status("Checking for \"aclitem\" data type in user tables");
>
> Why these changes? I think this is losing precision about what it's doing.
The message is too long, so there's no space between it and the "ok"
message:
Checking for incompatible "aclitem" data type in user tablesok
Instead of altering the messages, we could bump MESSAGE_WIDTH from 60 to
62 or 64. Do you prefer that approach? (BTW this probably needs to be
back-patched to v16.)
--
Nathan Bossart
Amazon Web Services: https://aws.amazon.com
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-01 16:00 Nathan Bossart <nathandbossart@gmail.com>
parent: Daniel Gustafsson <daniel@yesql.se>
0 siblings, 2 replies; 29+ messages in thread
From: Nathan Bossart @ 2023-08-01 16:00 UTC (permalink / raw)
To: Daniel Gustafsson <daniel@yesql.se>; +Cc: Peter Eisentraut <peter@eisentraut.org>; pgsql-hackers
On Tue, Aug 01, 2023 at 09:58:24AM +0200, Daniel Gustafsson wrote:
>> On 1 Aug 2023, at 09:45, Peter Eisentraut <peter@eisentraut.org> wrote:
>> On 28.07.23 01:51, Nathan Bossart wrote:
>
>>> This information can be used to better understand where the time is going
>>> and to validate future improvements.
>>
>> But who would use that, other than, you know, you, right now?
One of the main purposes of this thread is to gauge interest. I'm hoping
there are other developers who are interested in reducing
pg_upgrade-related downtime, and it seemed like it'd be nice to have
built-in functionality for measuring the step times instead of requiring
folks to apply this patch every time. And I think users might also be
interested in this information, if for no other reason than to help us
pinpoint which steps are taking longer for various workloads.
>> I think the pg_upgrade output is already too full with not-really-actionable information (like most of the above "Checking ..." are not really interesting for a regular user).
Perhaps. But IMO it's nice to know that it's doing things and making
progress, even if you don't understand exactly what it's doing all the
time. That being said, I wouldn't be opposed to hiding some of this output
behind a --verbose or --debug option or consolidating some of the steps
into fewer status messages.
> Maybe if made opt-in with a --debug option, or even a compiler option for
> enabling only in specialized debugging builds?
I'm totally okay with making the timing information an opt-in feature.
--
Nathan Bossart
Amazon Web Services: https://aws.amazon.com
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-01 18:28 Jacob Champion <jchampion@timescale.com>
parent: Nathan Bossart <nathandbossart@gmail.com>
1 sibling, 0 replies; 29+ messages in thread
From: Jacob Champion @ 2023-08-01 18:28 UTC (permalink / raw)
To: Nathan Bossart <nathandbossart@gmail.com>; +Cc: Daniel Gustafsson <daniel@yesql.se>; Peter Eisentraut <peter@eisentraut.org>; pgsql-hackers
On Tue, Aug 1, 2023 at 9:00 AM Nathan Bossart <nathandbossart@gmail.com> wrote:
> >> On 1 Aug 2023, at 09:45, Peter Eisentraut <peter@eisentraut.org> wrote:
> >> But who would use that, other than, you know, you, right now?
/me raises hand
Or at least, me back when I was hacking on pg_upgrade performance.
This, or something like it, would have been fantastic.
> >> I think the pg_upgrade output is already too full with not-really-actionable information (like most of the above "Checking ..." are not really interesting for a regular user).
>
> Perhaps. But IMO it's nice to know that it's doing things and making
> progress, even if you don't understand exactly what it's doing all the
> time.
+1. One of our findings at $prevjob was that some users *really* want
some indication, anything at all, that things are progressing and
aren't stuck. There was a lot of anxiety around upgrades.
(There are probably _better_ ways to indicate progress than the
current step divisions... But even poor progress indicators seemed to
lower blood pressures, IIRC.)
> That being said, I wouldn't be opposed to hiding some of this output
> behind a --verbose or --debug option or consolidating some of the steps
> into fewer status messages.
I agree that millisecond-level timing should probably be opt-in.
--Jacob
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-02 07:14 Peter Eisentraut <peter@eisentraut.org>
parent: Nathan Bossart <nathandbossart@gmail.com>
1 sibling, 2 replies; 29+ messages in thread
From: Peter Eisentraut @ 2023-08-02 07:14 UTC (permalink / raw)
To: Nathan Bossart <nathandbossart@gmail.com>; Daniel Gustafsson <daniel@yesql.se>; +Cc: pgsql-hackers
On 01.08.23 18:00, Nathan Bossart wrote:
> One of the main purposes of this thread is to gauge interest. I'm hoping
> there are other developers who are interested in reducing
> pg_upgrade-related downtime, and it seemed like it'd be nice to have
> built-in functionality for measuring the step times instead of requiring
> folks to apply this patch every time. And I think users might also be
> interested in this information, if for no other reason than to help us
> pinpoint which steps are taking longer for various workloads.
If it's just for developers and expert users, perhaps existing
shell-level functionality like "pg_upgrade | ts" would suffice?
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-02 07:15 Peter Eisentraut <peter@eisentraut.org>
parent: Nathan Bossart <nathandbossart@gmail.com>
1 sibling, 1 reply; 29+ messages in thread
From: Peter Eisentraut @ 2023-08-02 07:15 UTC (permalink / raw)
To: Nathan Bossart <nathandbossart@gmail.com>; +Cc: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; pgsql-hackers
On 01.08.23 17:45, Nathan Bossart wrote:
> The message is too long, so there's no space between it and the "ok"
> message:
>
> Checking for incompatible "aclitem" data type in user tablesok
>
> Instead of altering the messages, we could bump MESSAGE_WIDTH from 60 to
> 62 or 64. Do you prefer that approach?
I think we should change the output format to be more like initdb, like
Doing something ... ok
without horizontally aligning all the "ok"s.
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-02 07:32 Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
parent: Peter Eisentraut <peter@eisentraut.org>
0 siblings, 1 reply; 29+ messages in thread
From: Bharath Rupireddy @ 2023-08-02 07:32 UTC (permalink / raw)
To: Peter Eisentraut <peter@eisentraut.org>; +Cc: Nathan Bossart <nathandbossart@gmail.com>; pgsql-hackers
On Wed, Aug 2, 2023 at 12:45 PM Peter Eisentraut <peter@eisentraut.org> wrote:
>
> On 01.08.23 17:45, Nathan Bossart wrote:
> > The message is too long, so there's no space between it and the "ok"
> > message:
> >
> > Checking for incompatible "aclitem" data type in user tablesok
> >
> > Instead of altering the messages, we could bump MESSAGE_WIDTH from 60 to
> > 62 or 64. Do you prefer that approach?
>
> I think we should change the output format to be more like initdb, like
>
> Doing something ... ok
>
> without horizontally aligning all the "ok"s.
While this looks simple, we might end up with a lot of diff and
changes after removing MESSAGE_WIDTH. There's a significant part of
pg_upgrade code that deals with MESSAGE_WIDTH. I don't think it's
worth the effort. Therefore, I'd prefer the simplest possible fix -
change the message to '"Checking for \"aclitem\" data type in user
tables". It may be an overkill, but we can consider adding
Assert(sizeof(message) < MESSAGE_WIDTH) in progress report functions
to not encourage new messages to end up in the same formatting issue.
--
Bharath Rupireddy
PostgreSQL Contributors Team
RDS Open Source Databases
Amazon Web Services: https://aws.amazon.com
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-02 08:30 Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
parent: Peter Eisentraut <peter@eisentraut.org>
1 sibling, 1 reply; 29+ messages in thread
From: Bharath Rupireddy @ 2023-08-02 08:30 UTC (permalink / raw)
To: Peter Eisentraut <peter@eisentraut.org>; +Cc: Nathan Bossart <nathandbossart@gmail.com>; Daniel Gustafsson <daniel@yesql.se>; pgsql-hackers
On Wed, Aug 2, 2023 at 12:44 PM Peter Eisentraut <peter@eisentraut.org> wrote:
>
> On 01.08.23 18:00, Nathan Bossart wrote:
> > One of the main purposes of this thread is to gauge interest. I'm hoping
> > there are other developers who are interested in reducing
> > pg_upgrade-related downtime, and it seemed like it'd be nice to have
> > built-in functionality for measuring the step times instead of requiring
> > folks to apply this patch every time. And I think users might also be
> > interested in this information, if for no other reason than to help us
> > pinpoint which steps are taking longer for various workloads.
>
> If it's just for developers and expert users, perhaps existing
> shell-level functionality like "pg_upgrade | ts" would suffice?
Interesting. I had to install moreutils package to get ts. And,
something like ts command may or may not be available on all
platforms. Moreover, the ts command gives me the timestamps for each
of the messages printed, so an extra step is required to calculate the
time taken for an operation. I think it'd be better if pg_upgrade can
calculate the time taken for each operation, and I'm okay if it is an
opt-in feature with --verbose option.
[1]
Aug 02 07:44:17 Sync data directory to disk ok
Aug 02 07:44:17 Creating script to delete old cluster ok
Aug 02 07:44:17 Checking for extension updates ok
--
Bharath Rupireddy
PostgreSQL Contributors Team
RDS Open Source Databases
Amazon Web Services: https://aws.amazon.com
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-02 09:22 Peter Eisentraut <peter@eisentraut.org>
parent: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
0 siblings, 0 replies; 29+ messages in thread
From: Peter Eisentraut @ 2023-08-02 09:22 UTC (permalink / raw)
To: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; +Cc: Nathan Bossart <nathandbossart@gmail.com>; Daniel Gustafsson <daniel@yesql.se>; pgsql-hackers
On 02.08.23 10:30, Bharath Rupireddy wrote:
> Moreover, the ts command gives me the timestamps for each
> of the messages printed, so an extra step is required to calculate the
> time taken for an operation.
There is "ts -i" for that.
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-02 15:59 Nathan Bossart <nathandbossart@gmail.com>
parent: Peter Eisentraut <peter@eisentraut.org>
1 sibling, 0 replies; 29+ messages in thread
From: Nathan Bossart @ 2023-08-02 15:59 UTC (permalink / raw)
To: Peter Eisentraut <peter@eisentraut.org>; +Cc: Daniel Gustafsson <daniel@yesql.se>; pgsql-hackers
On Wed, Aug 02, 2023 at 09:14:06AM +0200, Peter Eisentraut wrote:
> On 01.08.23 18:00, Nathan Bossart wrote:
>> One of the main purposes of this thread is to gauge interest. I'm hoping
>> there are other developers who are interested in reducing
>> pg_upgrade-related downtime, and it seemed like it'd be nice to have
>> built-in functionality for measuring the step times instead of requiring
>> folks to apply this patch every time. And I think users might also be
>> interested in this information, if for no other reason than to help us
>> pinpoint which steps are taking longer for various workloads.
>
> If it's just for developers and expert users, perhaps existing shell-level
> functionality like "pg_upgrade | ts" would suffice?
Sure, we could just leave it at that unless anyone sees a reason to bake it
in.
--
Nathan Bossart
Amazon Web Services: https://aws.amazon.com
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-02 16:09 Nathan Bossart <nathandbossart@gmail.com>
parent: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
0 siblings, 1 reply; 29+ messages in thread
From: Nathan Bossart @ 2023-08-02 16:09 UTC (permalink / raw)
To: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; +Cc: Peter Eisentraut <peter@eisentraut.org>; pgsql-hackers
On Wed, Aug 02, 2023 at 01:02:53PM +0530, Bharath Rupireddy wrote:
> On Wed, Aug 2, 2023 at 12:45 PM Peter Eisentraut <peter@eisentraut.org> wrote:
>> I think we should change the output format to be more like initdb, like
>>
>> Doing something ... ok
>>
>> without horizontally aligning all the "ok"s.
>
> While this looks simple, we might end up with a lot of diff and
> changes after removing MESSAGE_WIDTH. There's a significant part of
> pg_upgrade code that deals with MESSAGE_WIDTH. I don't think it's
> worth the effort. Therefore, I'd prefer the simplest possible fix -
> change the message to '"Checking for \"aclitem\" data type in user
> tables". It may be an overkill, but we can consider adding
> Assert(sizeof(message) < MESSAGE_WIDTH) in progress report functions
> to not encourage new messages to end up in the same formatting issue.
I don't think it's that difficult. ІMO the bigger question is whether we
want to back-patch such a change to v16 at this point.
--
Nathan Bossart
Amazon Web Services: https://aws.amazon.com
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-02 17:39 Nathan Bossart <nathandbossart@gmail.com>
parent: Nathan Bossart <nathandbossart@gmail.com>
0 siblings, 0 replies; 29+ messages in thread
From: Nathan Bossart @ 2023-08-02 17:39 UTC (permalink / raw)
To: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; +Cc: Peter Eisentraut <peter@eisentraut.org>; pgsql-hackers
On Wed, Aug 02, 2023 at 09:09:14AM -0700, Nathan Bossart wrote:
> On Wed, Aug 02, 2023 at 01:02:53PM +0530, Bharath Rupireddy wrote:
>> On Wed, Aug 2, 2023 at 12:45 PM Peter Eisentraut <peter@eisentraut.org> wrote:
>>> I think we should change the output format to be more like initdb, like
>>>
>>> Doing something ... ok
>>>
>>> without horizontally aligning all the "ok"s.
>>
>> While this looks simple, we might end up with a lot of diff and
>> changes after removing MESSAGE_WIDTH. There's a significant part of
>> pg_upgrade code that deals with MESSAGE_WIDTH. I don't think it's
>> worth the effort. Therefore, I'd prefer the simplest possible fix -
>> change the message to '"Checking for \"aclitem\" data type in user
>> tables". It may be an overkill, but we can consider adding
>> Assert(sizeof(message) < MESSAGE_WIDTH) in progress report functions
>> to not encourage new messages to end up in the same formatting issue.
>
> I don't think it's that difficult. ІMO the bigger question is whether we
> want to back-patch such a change to v16 at this point.
Here is a work-in-progress patch that seems to get things pretty close to
what Peter is suggesting.
--
Nathan Bossart
Amazon Web Services: https://aws.amazon.com
Attachments:
0001-work-in-progress-fix-pg_upgrade-output.patch (text/x-diff, 1.9K) download
From 1a8aab9c9c86c8fa140ccdb53d3479a77de0e762 Mon Sep 17 00:00:00 2001
From: Nathan Bossart <nathan@postgresql.org>
Date: Wed, 2 Aug 2023 10:20:11 -0700
Subject: [PATCH 1/1] work-in-progress: fix pg_upgrade output
---
src/bin/pg_upgrade/util.c | 14 +++++---------
1 file changed, 5 insertions(+), 9 deletions(-)
diff --git a/src/bin/pg_upgrade/util.c b/src/bin/pg_upgrade/util.c
index 21ba4c8f12..bea6d7289d 100644
--- a/src/bin/pg_upgrade/util.c
+++ b/src/bin/pg_upgrade/util.c
@@ -50,10 +50,10 @@ end_progress_output(void)
if (log_opts.isatty)
{
printf("\r");
- pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, "");
+ pg_log(PG_REPORT_NONL, "%-*s\r ", MESSAGE_WIDTH, "");
}
else if (log_opts.verbose)
- pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, "");
+ pg_log(PG_REPORT_NONL, " ");
}
/*
@@ -114,9 +114,6 @@ cleanup_output_dirs(void)
* prep_status
*
* Displays a message that describes an operation we are about to begin.
- * We pad the message out to MESSAGE_WIDTH characters so that all of the
- * "ok" and "failed" indicators line up nicely. (Overlength messages
- * will be truncated, so don't get too verbose.)
*
* A typical sequence would look like this:
* prep_status("about to flarb the next %d files", fileCount);
@@ -135,8 +132,7 @@ prep_status(const char *fmt,...)
vsnprintf(message, sizeof(message), fmt, args);
va_end(args);
- /* trim strings */
- pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+ pg_log(PG_REPORT_NONL, "%s ... ", message);
}
/*
@@ -167,9 +163,9 @@ prep_status_progress(const char *fmt,...)
* put the individual progress items onto the next line.
*/
if (log_opts.isatty || log_opts.verbose)
- pg_log(PG_REPORT, "%-*s", MESSAGE_WIDTH, message);
+ pg_log(PG_REPORT, "%s ...", message);
else
- pg_log(PG_REPORT_NONL, "%-*s", MESSAGE_WIDTH, message);
+ pg_log(PG_REPORT_NONL, "%s ... ", message);
}
static void
--
2.25.1
* Re: add timing information to pg_upgrade
@ 2023-08-22 09:49 Peter Eisentraut <peter@eisentraut.org>
parent: Nathan Bossart <nathandbossart@gmail.com>
1 sibling, 1 reply; 29+ messages in thread
From: Peter Eisentraut @ 2023-08-22 09:49 UTC (permalink / raw)
To: Nathan Bossart <nathandbossart@gmail.com>; +Cc: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; pgsql-hackers
On 01.08.23 17:45, Nathan Bossart wrote:
> On Tue, Aug 01, 2023 at 09:46:02AM +0200, Peter Eisentraut wrote:
>> On 31.07.23 20:37, Nathan Bossart wrote:
>>> - prep_status("Checking for incompatible \"aclitem\" data type in user tables");
>>> + prep_status("Checking for \"aclitem\" data type in user tables");
>>
>> Why these changes? I think this is losing precision about what it's doing.
>
> The message is too long, so there's no space between it and the "ok"
> message:
>
> Checking for incompatible "aclitem" data type in user tablesok
>
> Instead of altering the messages, we could bump MESSAGE_WIDTH from 60 to
> 62 or 64. Do you prefer that approach? (BTW this probably needs to be
> back-patched to v16.)
Let's change MESSAGE_WIDTH to 62 in v16, and then pursue the larger
restructuring leisurely.
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-22 14:06 Nathan Bossart <nathandbossart@gmail.com>
parent: Peter Eisentraut <peter@eisentraut.org>
0 siblings, 1 reply; 29+ messages in thread
From: Nathan Bossart @ 2023-08-22 14:06 UTC (permalink / raw)
To: Peter Eisentraut <peter@eisentraut.org>; +Cc: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; pgsql-hackers
On Tue, Aug 22, 2023 at 11:49:33AM +0200, Peter Eisentraut wrote:
> Let's change MESSAGE_WIDTH to 62 in v16, and then pursue the larger
> restructuring leisurely.
Sounds good. I plan to commit this within the next couple of days.
--
Nathan Bossart
Amazon Web Services: https://aws.amazon.com
^ permalink raw reply [nested|flat] 29+ messages in thread
* Re: add timing information to pg_upgrade
@ 2023-08-23 16:35 Nathan Bossart <nathandbossart@gmail.com>
parent: Nathan Bossart <nathandbossart@gmail.com>
0 siblings, 1 reply; 29+ messages in thread
From: Nathan Bossart @ 2023-08-23 16:35 UTC (permalink / raw)
To: Peter Eisentraut <peter@eisentraut.org>; +Cc: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; pgsql-hackers
On Tue, Aug 22, 2023 at 07:06:23AM -0700, Nathan Bossart wrote:
> On Tue, Aug 22, 2023 at 11:49:33AM +0200, Peter Eisentraut wrote:
>> Let's change MESSAGE_WIDTH to 62 in v16, and then pursue the larger
>> restructuring leisurely.
>
> Sounds good. I plan to commit this within the next couple of days.
Here's the patch. I'm going to run a couple of tests before committing,
but I don't think anything else is required.
--
Nathan Bossart
Amazon Web Services: https://aws.amazon.com
Attachments:
0001-bump-MESSAGE_WIDTH-to-62.patch (text/x-diff, 669B) download
From e2f65937666ec31004ec7668c475dd33c4ab0a91 Mon Sep 17 00:00:00 2001
From: Nathan Bossart <nathan@postgresql.org>
Date: Wed, 23 Aug 2023 09:31:11 -0700
Subject: [PATCH 1/1] bump MESSAGE_WIDTH to 62
---
src/bin/pg_upgrade/pg_upgrade.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/src/bin/pg_upgrade/pg_upgrade.h b/src/bin/pg_upgrade/pg_upgrade.h
index 3eea0139c7..7afa96716e 100644
--- a/src/bin/pg_upgrade/pg_upgrade.h
+++ b/src/bin/pg_upgrade/pg_upgrade.h
@@ -22,7 +22,7 @@
#define MAX_STRING 1024
#define QUERY_ALLOC 8192
-#define MESSAGE_WIDTH 60
+#define MESSAGE_WIDTH 62
#define GET_MAJOR_VERSION(v) ((v) / 100)
--
2.25.1
* Re: add timing information to pg_upgrade
@ 2023-08-24 17:23 Nathan Bossart <nathandbossart@gmail.com>
parent: Nathan Bossart <nathandbossart@gmail.com>
0 siblings, 0 replies; 29+ messages in thread
From: Nathan Bossart @ 2023-08-24 17:23 UTC (permalink / raw)
To: Peter Eisentraut <peter@eisentraut.org>; +Cc: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>; pgsql-hackers
On Wed, Aug 23, 2023 at 09:35:20AM -0700, Nathan Bossart wrote:
> On Tue, Aug 22, 2023 at 07:06:23AM -0700, Nathan Bossart wrote:
>> On Tue, Aug 22, 2023 at 11:49:33AM +0200, Peter Eisentraut wrote:
>>> Let's change MESSAGE_WIDTH to 62 in v16, and then pursue the larger
>>> restructuring leisurely.
>>
>> Sounds good. I plan to commit this within the next couple of days.
>
> Here's the patch. I'm going to run a couple of tests before committing,
> but I don't think anything else is required.
committed
--
Nathan Bossart
Amazon Web Services: https://aws.amazon.com
^ permalink raw reply [nested|flat] 29+ messages in thread
end of thread, other threads:[~2023-08-24 17:23 UTC | newest]
Thread overview: 29+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2023-07-27 23:16 [PATCH v1 1/1] add timing information to pg_upgrade Nathan Bossart <nathan@postgresql.org>
2023-07-27 23:16 [PATCH v2 1/1] add timing information to pg_upgrade Nathan Bossart <nathan@postgresql.org>
2023-07-27 23:16 [PATCH v3 2/2] add timing information to pg_upgrade Nathan Bossart <nathan@postgresql.org>
2023-07-27 23:51 add timing information to pg_upgrade Nathan Bossart <nathandbossart@gmail.com>
2023-07-28 07:40 ` Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
2023-07-28 17:38 ` Nathan Bossart <nathandbossart@gmail.com>
2023-07-28 18:47 ` Nathan Bossart <nathandbossart@gmail.com>
2023-07-29 06:47 ` Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
2023-07-29 21:14 ` Nathan Bossart <nathandbossart@gmail.com>
2023-07-31 06:04 ` Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
2023-07-31 18:37 ` Nathan Bossart <nathandbossart@gmail.com>
2023-08-01 07:46 ` Peter Eisentraut <peter@eisentraut.org>
2023-08-01 15:45 ` Nathan Bossart <nathandbossart@gmail.com>
2023-08-02 07:15 ` Peter Eisentraut <peter@eisentraut.org>
2023-08-02 07:32 ` Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
2023-08-02 16:09 ` Nathan Bossart <nathandbossart@gmail.com>
2023-08-02 17:39 ` Nathan Bossart <nathandbossart@gmail.com>
2023-08-22 09:49 ` Peter Eisentraut <peter@eisentraut.org>
2023-08-22 14:06 ` Nathan Bossart <nathandbossart@gmail.com>
2023-08-23 16:35 ` Nathan Bossart <nathandbossart@gmail.com>
2023-08-24 17:23 ` Nathan Bossart <nathandbossart@gmail.com>
2023-08-01 07:45 ` Peter Eisentraut <peter@eisentraut.org>
2023-08-01 07:58 ` Daniel Gustafsson <daniel@yesql.se>
2023-08-01 16:00 ` Nathan Bossart <nathandbossart@gmail.com>
2023-08-01 18:28 ` Jacob Champion <jchampion@timescale.com>
2023-08-02 07:14 ` Peter Eisentraut <peter@eisentraut.org>
2023-08-02 08:30 ` Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
2023-08-02 09:22 ` Peter Eisentraut <peter@eisentraut.org>
2023-08-02 15:59 ` Nathan Bossart <nathandbossart@gmail.com>
This inbox is served by DDX for PostgreSQL; see mirroring instructions
for how to clone and mirror all data and code used for this inbox