agora inbox for [email protected]  

help / color / mirror / Atom feed

[PATCH v1 2/2] WIP: Use cpu reference cycles, via rdtsc, to measure time for instrumentation.
68+ messages / 1 participants
[nested] [flat]

* [PATCH v1 2/2] WIP: Use cpu reference cycles, via rdtsc, to measure time for instrumentation.
@ 2020-06-12 02:38 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2020-06-12 02:38 UTC (permalink / raw)

---
 src/include/portability/instr_time.h | 68 ++++++++++++++++++++++++----
 1 file changed, 60 insertions(+), 8 deletions(-)

diff --git a/src/include/portability/instr_time.h b/src/include/portability/instr_time.h
index fc058d548a8..8b2f9a2e707 100644
--- a/src/include/portability/instr_time.h
+++ b/src/include/portability/instr_time.h
@@ -83,7 +83,9 @@
 #define PG_INSTR_CLOCK	CLOCK_REALTIME
 #endif
 
+/* time in baseline cpu cycles */
 typedef int64 instr_time;
+
 #define NS_PER_S INT64CONST(1000000000)
 #define US_PER_S INT64CONST(1000000)
 #define MS_PER_S INT64CONST(1000)
@@ -95,17 +97,67 @@ typedef int64 instr_time;
 
 #define INSTR_TIME_SET_ZERO(t)	((t) = 0)
 
-static inline instr_time pg_clock_gettime_ns(void)
+#include <x86intrin.h>
+#include <cpuid.h>
+
+/*
+ * Return what the number of cycles needs to be multiplied with to end up with
+ * seconds.
+ *
+ * FIXME: The cold portion should probably be out-of-line. And it'd be better
+ * to not recompute this in every file that uses this. Best would probably be
+ * to require explicit initialization of cycles_to_sec, because having a
+ * branch really is unnecessary.
+ *
+ * FIXME: We should probably not unnecessarily use floating point math
+ * here. And it's likely that the numbers are small enough that we are running
+ * into floating point inaccuracies already. Probably worthwhile to be a good
+ * bit smarter.
+ *
+ * FIXME: This would need to be conditional, with a fallback to something not
+ * rdtsc based.
+ */
+static inline double __attribute__((const))
+get_cycles_to_sec(void)
 {
-	struct timespec tmp;
+	static double cycles_to_sec = 0;
 
-	clock_gettime(PG_INSTR_CLOCK, &tmp);
+	/*
+	 * Compute baseline cpu peformance, determines speed at which rdtsc advances
+	 */
+	if (unlikely(cycles_to_sec == 0))
+	{
+		uint32 cpuinfo[4] = {0};
 
-	return tmp.tv_sec * NS_PER_S + tmp.tv_nsec;
+		__get_cpuid(0x16, cpuinfo, cpuinfo + 1, cpuinfo + 2, cpuinfo + 3);
+		cycles_to_sec = 1 / ((double) cpuinfo[0] * 1000 * 1000);
+	}
+
+	return cycles_to_sec;
+}
+
+static inline instr_time pg_clock_gettime_ref_cycles(void)
+{
+	/*
+	 * The rdtscp waits for all in-flight instructions to finish (but allows
+	 * later instructions to start concurrently). That's good for some timing
+	 * situations (when the time is supposed to cover all the work), but
+	 * terrible for others (when sub-parts of work are measured, because then
+	 * the pipeline stall due to the wait change the overall timing).
+	 */
+#if 0
+	unsigned int aux;
+	int64 tsc = __rdtscp(&aux);
+
+	return tsc;
+#else
+
+	return __rdtsc();
+#endif
 }
 
 #define INSTR_TIME_SET_CURRENT(t) \
-	(t) = pg_clock_gettime_ns()
+	(t) = pg_clock_gettime_ref_cycles()
 
 #define INSTR_TIME_ADD(x,y) \
 	do { \
@@ -123,13 +175,13 @@ static inline instr_time pg_clock_gettime_ns(void)
 	} while (0)
 
 #define INSTR_TIME_GET_DOUBLE(t) \
-	((double) (t) / NS_PER_S)
+	((double) (t) * get_cycles_to_sec())
 
 #define INSTR_TIME_GET_MILLISEC(t) \
-	((double) (t) / NS_PER_MS)
+	((double) (t) * (get_cycles_to_sec() * MS_PER_S))
 
 #define INSTR_TIME_GET_MICROSEC(t) \
-	((double) (t) / NS_PER_US)
+	((double) (t) * (get_cycles_to_sec() * US_PER_S))
 
 #else							/* !HAVE_CLOCK_GETTIME */
 
-- 
2.25.0.114.g5b0ca878e0


--wn4ncs637ccpvbhb--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 68+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 68+ messages in thread

end of thread, other threads:[~2026-04-07 13:11 UTC | newest]

Thread overview: 68+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2020-06-12 02:38 [PATCH v1 2/2] WIP: Use cpu reference cycles, via rdtsc, to measure time for instrumentation. Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>

This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox