agora inbox for [email protected]  

help / color / mirror / Atom feed

[PATCH v46 5/7] Fix a few problems in index build progress reporting.
118+ messages / 2 participants
[nested] [flat]

* [PATCH v46 5/7] Fix a few problems in index build progress reporting.
@ 2026-03-27 15:50 Álvaro Herrera <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Álvaro Herrera @ 2026-03-27 15:50 UTC (permalink / raw)

First, index_build() should not update the progress when being driven by
REPACK, because the progress reporting infractructure cannot handle status of
two commands at the same time. So far, REPACK with the CONCURRENTLY option
neglected this problem altogether, but even the existing REPACK wasn't
consistent enough: even if the 'progress' variable in repack_index() was
false, it didn't pass the value to index_build().

Second, REPACK (CONCURRENTLY) should not set PROGRESS_REPACK_PHASE to
PROGRESS_REPACK_PHASE_FINAL_CLEANUP in rebuild_relation() because it calls
finish_heap_swap() anyway (via rebuild_relation_finish_concurrent()), which
does the same thing.
---
 src/backend/bootstrap/bootstrap.c |  2 +-
 src/backend/catalog/heap.c        |  3 ++-
 src/backend/catalog/index.c       | 22 ++++++++++++++++++----
 src/backend/catalog/toasting.c    |  3 ++-
 src/backend/commands/indexcmds.c  |  1 +
 src/include/catalog/index.h       |  4 +++-
 6 files changed, 27 insertions(+), 8 deletions(-)

diff --git a/src/backend/bootstrap/bootstrap.c b/src/backend/bootstrap/bootstrap.c
index 68a42de0889..1c8226c6d67 100644
--- a/src/backend/bootstrap/bootstrap.c
+++ b/src/backend/bootstrap/bootstrap.c
@@ -1181,7 +1181,7 @@ build_indices(void)
 		heap = table_open(ILHead->il_heap, NoLock);
 		ind = index_open(ILHead->il_ind, NoLock);
 
-		index_build(heap, ind, ILHead->il_info, false, false);
+		index_build(heap, ind, ILHead->il_info, false, false, false);
 
 		index_close(ind, NoLock);
 		table_close(heap, NoLock);
diff --git a/src/backend/catalog/heap.c b/src/backend/catalog/heap.c
index 5748aa9a1a9..ae6b7cda3dd 100644
--- a/src/backend/catalog/heap.c
+++ b/src/backend/catalog/heap.c
@@ -3570,7 +3570,8 @@ RelationTruncateIndexes(Relation heapRelation)
 
 		/* Initialize the index and rebuild */
 		/* Note: we do not need to re-establish pkey setting */
-		index_build(heapRelation, currentIndex, indexInfo, true, false);
+		index_build(heapRelation, currentIndex, indexInfo, true, false,
+					true);
 
 		/* We're done with this index */
 		index_close(currentIndex, NoLock);
diff --git a/src/backend/catalog/index.c b/src/backend/catalog/index.c
index de7182a85a9..cfd33f73f48 100644
--- a/src/backend/catalog/index.c
+++ b/src/backend/catalog/index.c
@@ -715,6 +715,9 @@ UpdateIndexRelation(Oid indexoid,
  *			already exists.
  *		INDEX_CREATE_PARTITIONED:
  *			create a partitioned index (table must be partitioned)
+ *		INDEX_CREATE_REPORT_PROGRESS:
+ *			update the backend's progress information during index build.
+
  * constr_flags: flags passed to index_constraint_create
  *		(only if INDEX_CREATE_ADD_CONSTRAINT is set)
  * allow_system_table_mods: allow table to be a system catalog
@@ -760,6 +763,7 @@ index_create(Relation heapRelation,
 	bool		invalid = (flags & INDEX_CREATE_INVALID) != 0;
 	bool		concurrent = (flags & INDEX_CREATE_CONCURRENT) != 0;
 	bool		partitioned = (flags & INDEX_CREATE_PARTITIONED) != 0;
+	bool		progress = (flags & INDEX_CREATE_REPORT_PROGRESS) != 0;
 	char		relkind;
 	TransactionId relfrozenxid;
 	MultiXactId relminmxid;
@@ -1276,7 +1280,8 @@ index_create(Relation heapRelation,
 	}
 	else
 	{
-		index_build(heapRelation, indexRelation, indexInfo, false, true);
+		index_build(heapRelation, indexRelation, indexInfo, false, true,
+					progress);
 	}
 
 	/*
@@ -1438,6 +1443,12 @@ index_create_copy(Relation heapRelation, bool concurrently,
 		stattargets[i].isnull = isnull;
 	}
 
+	/*
+	 * Note: The current callers do not need INDEX_CREATE_REPORT_PROGRESS. If
+	 * 'concurrently' is true, there is no build at all. Otherwise the index
+	 * build is a sub-command of REPACK. The current infrastructure does not
+	 * allow two commands to report their progress at the same time.
+	 */
 	if (concurrently)
 		flags = INDEX_CREATE_SKIP_BUILD | INDEX_CREATE_CONCURRENT;
 
@@ -1528,7 +1539,7 @@ index_concurrently_build(Oid heapRelationId,
 	indexInfo->ii_BrokenHotChain = false;
 
 	/* Now build the index */
-	index_build(heapRel, indexRelation, indexInfo, false, true);
+	index_build(heapRel, indexRelation, indexInfo, false, true, true);
 
 	/* Roll back any GUC changes executed by index functions */
 	AtEOXact_GUC(false, save_nestlevel);
@@ -3001,6 +3012,7 @@ index_update_stats(Relation rel,
  *
  * isreindex indicates we are recreating a previously-existing index.
  * parallel indicates if parallelism may be useful.
+ * progress indicates if the backend should update its progress info.
  *
  * Note: before Postgres 8.2, the passed-in heap and index Relations
  * were automatically closed by this routine.  This is no longer the case.
@@ -3011,7 +3023,8 @@ index_build(Relation heapRelation,
 			Relation indexRelation,
 			IndexInfo *indexInfo,
 			bool isreindex,
-			bool parallel)
+			bool parallel,
+			bool progress)
 {
 	IndexBuildResult *stats;
 	Oid			save_userid;
@@ -3062,6 +3075,7 @@ index_build(Relation heapRelation,
 	RestrictSearchPath();
 
 	/* Set up initial progress report status */
+	if (progress)
 	{
 		const int	progress_index[] = {
 			PROGRESS_CREATEIDX_PHASE,
@@ -3819,7 +3833,7 @@ reindex_index(const ReindexStmt *stmt, Oid indexId,
 
 	/* Initialize the index and rebuild */
 	/* Note: we do not need to re-establish pkey setting */
-	index_build(heapRelation, iRel, indexInfo, true, true);
+	index_build(heapRelation, iRel, indexInfo, true, true, progress);
 
 	/* Re-allow use of target index */
 	ResetReindexProcessing();
diff --git a/src/backend/catalog/toasting.c b/src/backend/catalog/toasting.c
index 078a1cf5127..73c41360ae9 100644
--- a/src/backend/catalog/toasting.c
+++ b/src/backend/catalog/toasting.c
@@ -331,7 +331,8 @@ create_toast_table(Relation rel, Oid toastOid, Oid toastIndexOid,
 				 BTREE_AM_OID,
 				 rel->rd_rel->reltablespace,
 				 collationIds, opclassIds, NULL, coloptions, NULL, (Datum) 0,
-				 INDEX_CREATE_IS_PRIMARY, 0, true, true, NULL);
+				 INDEX_CREATE_IS_PRIMARY | INDEX_CREATE_REPORT_PROGRESS, 0,
+				 true, true, NULL);
 
 	table_close(toast_rel, NoLock);
 
diff --git a/src/backend/commands/indexcmds.c b/src/backend/commands/indexcmds.c
index 83edab38760..c9e22e95515 100644
--- a/src/backend/commands/indexcmds.c
+++ b/src/backend/commands/indexcmds.c
@@ -1233,6 +1233,7 @@ DefineIndex(ParseState *pstate,
 		flags |= INDEX_CREATE_PARTITIONED;
 	if (stmt->primary)
 		flags |= INDEX_CREATE_IS_PRIMARY;
+	flags |= INDEX_CREATE_REPORT_PROGRESS;
 
 	/*
 	 * If the table is partitioned, and recursion was declined but partitions
diff --git a/src/include/catalog/index.h b/src/include/catalog/index.h
index 56a064ef444..a03238304a0 100644
--- a/src/include/catalog/index.h
+++ b/src/include/catalog/index.h
@@ -71,6 +71,7 @@ extern void index_check_primary_key(Relation heapRel,
 #define	INDEX_CREATE_IF_NOT_EXISTS			(1 << 4)
 #define	INDEX_CREATE_PARTITIONED			(1 << 5)
 #define INDEX_CREATE_INVALID				(1 << 6)
+#define INDEX_CREATE_REPORT_PROGRESS		(1 << 7)
 
 extern Oid	index_create(Relation heapRelation,
 						 const char *indexRelationName,
@@ -148,7 +149,8 @@ extern void index_build(Relation heapRelation,
 						Relation indexRelation,
 						IndexInfo *indexInfo,
 						bool isreindex,
-						bool parallel);
+						bool parallel,
+						bool progress);
 
 extern void validate_index(Oid heapId, Oid indexId, Snapshot snapshot);
 
-- 
2.47.3


--mdsv5bdgfjjj6d77
Content-Type: text/x-diff; charset=utf-8
Content-Disposition: attachment;
	filename="v46-0006-Error-out-any-process-that-would-block-at-REPACK.patch"



^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

* [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush'
@ 2026-04-07 13:11 Andres Freund <[email protected]>
  0 siblings, 0 replies; 118+ messages in thread

From: Andres Freund @ 2026-04-07 13:11 UTC (permalink / raw)

The investigation into the negative test performance impact of 7e8aeb9e483
lead to discovering that there are a few issues with WAIT FOR.

This commit is just a minimal fix to prevent hangs in standby_flush mode, due
to WAIT FOR ... 'standby_flush' seeing a 0 LSN if a newly started walreceiver
does not receive any writes, because the stanby is already caught up.

There are several other issues and this is isn't necessarily the best fix. But
this way we get the hangs out of the way.

Reported-by: Tom Lane <[email protected]>
Discussion: https://postgr.es/m/zqbppucpmkeqecfy4s5kscnru4tbk6khp3ozqz6ad2zijz354k@w4bdf4z3wqoz
---
 src/backend/replication/walreceiver.c      | 2 --
 src/backend/replication/walreceiverfuncs.c | 1 +
 2 files changed, 1 insertion(+), 2 deletions(-)

diff --git a/src/backend/replication/walreceiver.c b/src/backend/replication/walreceiver.c
index a437273cf9a..09fde92bfd7 100644
--- a/src/backend/replication/walreceiver.c
+++ b/src/backend/replication/walreceiver.c
@@ -242,8 +242,6 @@ WalReceiverMain(const void *startup_data, size_t startup_data_len)
 
 	SpinLockRelease(&walrcv->mutex);
 
-	pg_atomic_write_u64(&WalRcv->writtenUpto, 0);
-
 	/* Arrange to clean up at walreceiver exit */
 	on_shmem_exit(WalRcvDie, PointerGetDatum(&startpointTLI));
 
diff --git a/src/backend/replication/walreceiverfuncs.c b/src/backend/replication/walreceiverfuncs.c
index 4e03e721872..bd5d47be964 100644
--- a/src/backend/replication/walreceiverfuncs.c
+++ b/src/backend/replication/walreceiverfuncs.c
@@ -321,6 +321,7 @@ RequestXLogStreaming(TimeLineID tli, XLogRecPtr recptr, const char *conninfo,
 		walrcv->flushedUpto = recptr;
 		walrcv->receivedTLI = tli;
 		walrcv->latestChunkStart = recptr;
+		pg_atomic_write_u64(&walrcv->writtenUpto, recptr);
 	}
 	walrcv->receiveStart = recptr;
 	walrcv->receiveStartTLI = tli;
-- 
2.53.0.1.gb2826b52eb


--ags3ltqh73mz7p2n--





^ permalink  raw  reply  [nested|flat] 118+ messages in thread

end of thread, other threads:[~2026-04-07 13:11 UTC | newest]

Thread overview: 118+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2026-03-27 15:50 [PATCH v46 5/7] Fix a few problems in index build progress reporting. Álvaro Herrera <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>
2026-04-07 13:11 [PATCH v1] Minimal fix for WAIT FOR ... MODE 'standby_flush' Andres Freund <[email protected]>

This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox