agora inbox for [email protected]  

help / color / mirror / Atom feed

[PATCH v20240912 3/4] add unlikely hint for enlargeStringInfo.
46+ messages / 2 participants
[nested] [flat]

* [PATCH v20240912 3/4] add unlikely hint for enlargeStringInfo.
@ 2024-09-11 04:25  Andy Fan <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Andy Fan @ 2024-09-11 04:25 UTC (permalink / raw)

enlargeStringInfo  has a noticeable ratio in perf peport with a
"select * from pg_class" workload). So add a unlikely  hint in
enlargeStringinfo to avoid some overhead.
---
 src/common/stringinfo.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/src/common/stringinfo.c b/src/common/stringinfo.c
index eb9d6502fc..838d9b80d0 100644
--- a/src/common/stringinfo.c
+++ b/src/common/stringinfo.c
@@ -297,7 +297,7 @@ enlargeStringInfo(StringInfo str, int needed)
 	 * Guard against out-of-range "needed" values.  Without this, we can get
 	 * an overflow or infinite loop in the following.
 	 */
-	if (needed < 0)				/* should not happen */
+	if (unlikely(needed < 0))				/* should not happen */
 	{
 #ifndef FRONTEND
 		elog(ERROR, "invalid string enlargement request size: %d", needed);
@@ -306,7 +306,7 @@ enlargeStringInfo(StringInfo str, int needed)
 		exit(EXIT_FAILURE);
 #endif
 	}
-	if (((Size) needed) >= (MaxAllocSize - (Size) str->len))
+	if (unlikely(((Size) needed) >= (MaxAllocSize - (Size) str->len)))
 	{
 #ifndef FRONTEND
 		ereport(ERROR,
-- 
2.45.1


--=-=-=
Content-Type: text/x-diff
Content-Disposition: attachment;
 filename=v20240912-0001-Refactor-float8out_internval-for-better-pe.patch



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

* [PATCH v3 1/7] Track retired system procedures in pg_retired.dat
@ 2026-01-29 23:47  Mark Wong <[email protected]>
  0 siblings, 0 replies; 46+ messages in thread

From: Mark Wong @ 2026-01-29 23:47 UTC (permalink / raw)

System procedures may be removed from time to time.  Keep track of
previously used OIDs to prevent potential conflicts from reusing OIDs
after an upgrade.
---
 src/include/catalog/pg_retired.dat   | 20 ++++++++++++++++++++
 src/include/catalog/renumber_oids.pl |  9 +++++++++
 src/include/catalog/unused_oids      |  7 +++++++
 3 files changed, 36 insertions(+)
 create mode 100644 src/include/catalog/pg_retired.dat

diff --git a/src/include/catalog/pg_retired.dat b/src/include/catalog/pg_retired.dat
new file mode 100644
index 00000000000..413b68ad1cd
--- /dev/null
+++ b/src/include/catalog/pg_retired.dat
@@ -0,0 +1,20 @@
+#----------------------------------------------------------------------
+#
+# pg_retired.dat
+#    Entries that have been removed from pg_proc.dat with OIDs that are
+#    are not to be reused.
+#
+# Portions Copyright (c) 1996-2026, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/include/catalog/pg_retired.dat
+#
+#----------------------------------------------------------------------
+
+[
+
+# What's primarily important here is knowing which OIDs are not to be reused.
+# At the same time, it may be good to be reminded what procedure was associated
+# with it.
+
+]
diff --git a/src/include/catalog/renumber_oids.pl b/src/include/catalog/renumber_oids.pl
index f6e25d0f1e1..7489be02a50 100755
--- a/src/include/catalog/renumber_oids.pl
+++ b/src/include/catalog/renumber_oids.pl
@@ -68,6 +68,15 @@ my $oids = Catalog::FindAllOidsFromHeaders(@header_files);
 my %oidhash;
 @oidhash{@$oids} = undef;
 
+# Also include OIDs listed in pg_retired.dat to prevent new OIDs to be mapped
+# to OIDs that have been retired.
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	$oidhash{ $row->{oid} } = undef
+	  if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Select new OIDs for existing OIDs in the mapped range.
 # We do this first so that we preserve the ordering of the mapped OIDs
 # (for reproducibility's sake), and so that if we fail due to running out
diff --git a/src/include/catalog/unused_oids b/src/include/catalog/unused_oids
index 147fba5e209..aeb485d9b5e 100755
--- a/src/include/catalog/unused_oids
+++ b/src/include/catalog/unused_oids
@@ -32,6 +32,13 @@ my @input_files = glob("pg_*.h");
 
 my $oids = Catalog::FindAllOidsFromHeaders(@input_files);
 
+# Also exclude OIDs listed in pg_retired.dat
+my $retired_data = Catalog::ParseData('pg_retired.dat', undef, 0);
+foreach my $row (@$retired_data)
+{
+	push @{$oids}, $row->{oid} if ref $row eq 'HASH' && defined $row->{oid};
+}
+
 # Also push FirstGenbkiObjectId to serve as a terminator for the last gap.
 my $FirstGenbkiObjectId =
   Catalog::FindDefinedSymbol('access/transam.h', '..', 'FirstGenbkiObjectId');
-- 
2.43.0


--zd8Z8rlPOcTi77n/
Content-Type: text/x-diff; charset=us-ascii
Content-Disposition: attachment;
	filename="v3-0002-Handle-pg_get_ruledef-default-args-in-system_func.patch"



^ permalink  raw  reply  [nested|flat] 46+ messages in thread

end of thread, other threads:[~2026-01-29 23:47 UTC | newest]

Thread overview: 46+ messages (download: mbox mbox.gz follow: Atom feed)
-- links below jump to the message on this page --
2024-09-11 04:25 [PATCH v20240912 3/4] add unlikely hint for enlargeStringInfo. Andy Fan <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>
2026-01-29 23:47 [PATCH v3 1/7] Track retired system procedures in pg_retired.dat Mark Wong <[email protected]>

This inbox is served by agora; see mirroring instructions
for how to clone and mirror all data and code used for this inbox